Disqus will not be open. Only works in safe mode
I am running windows 7. Never had a problem with opening of Disqus on Cnn until today. Yesterday I updated avast, and no problem with disqus yesterday after the update. Today, the section of disqus on CNN opens at all in Firefox. It works fine in IE. I went through all the trouble shooting pages. The only way he opens disqus, is if I open Firefox in "safe" mode I followed the instructions and finally disabled 'everything', same avast, plugins, extensions, add-ons, etc. Even with everything turned off, including avast, it only opens disqus in safe mode. I consider my self pretty darn good on the computer, in fact, I'm the Go-to-Guy "in my circle of friends when someone computer crashes. However, I am out of options here. The only thing I have not tried is the Firefox "reset". I hesitate to do now, because by disabling all with no luck, I don't see a reset to help me.
Thanks in advance to anyone who can help me with this.
Hello
The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
Note: This will make you lose all the Extensions and preferences.
- Sites Web open is not recorded in less than 25 versions of Firefox.
To reset Firefox, perform the following steps:
- Go to Firefox > help > troubleshooting information.
- Click on the button 'Reset Firefox'.
- Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
- Firefox opens with all the default settings applied.
Information can be found in the article Firefox Refresh - reset the settings and Add-ons .
This solve your problems? Please report to us!
Thank you.
Tags: Firefox
Similar Questions
-
Firefox crashes at startup, only works in safe mode
Hello.
As the title says, I can't start Firefox because it crashes instantly. It only works in safe mode.That's what I've tried so far, but it did not work:
Restored Firefox.
Reinstalled Firefox and also delete my profiles.
Hardware acceleration disabled.These are my recent incident reports
bp-114dcdff-7b46-425b-8ec0-478102140218 bp-464d26b6-4530-4230-8e4f-5000e2140218 bp-7b489bc8-20ed-4cb5-9d3a-233a02140218 bp-6a0e5565-1f66-4606-8c29-8ac292140218
Thanks in advance, I hope you can help me.
Thanks for your answers, I've updated my graphics card driver, now I can use Firefox out of safe mode with disabled hardware acceleration.
There is another problem now, Firefox crashes when I try to start with Profile Manager, I use two different profiles, so I need this feature.
Here are two reports of incidents on the problem:
BP-a257ee60-b8d6-495c-82a3-605572140218
BP-2e19ad39-84c5-4BD6-B251-fcbaf2140218
Thanks for your help and sorry for my English.
EDIT: I had to repair my installation of windows with the installation disc, now Firefox works, thank you Tyler and cor - el for your time.
-
keyboard and mouse on packard bell laptop only work in safe mode
I have a packard bell easynote laptop running on windows vista, which has fine worked for two years, the other day I went to signon and not all the hits of keyboard have been recognized, after possibly connection and found loading keyboard and a mouse does not respond as completely unusable.
-Booted safe mode and everything works fine, ran the antivirus and diagnosis-nothing found, still only works in safe mode.
has run a restore of system-nada, still only works in safe mode
tried an own help start-up-no, still only works in safe mode
Please help he kills me!
Well, I decided to bite the bullet and give it a go, after all, I know very little of these things, however I'd wait until Saturday, when I have the time to focus on it, then the word 'Register' in your response reminded me that I had bought registry cleaner Uniblue several months ago that I ran last night and hey presto problem solved! :), I'll never know if your solution would work but thanks for your help anyway and I hope that you would have had me there.
Rich
-
WiFi MiniPCI card only works in "Safe Mode with network.
AR5001Xplus MiniPCI card only works in "Safe Mode with network" (windowsXP-Home-SP2 and all updates recent).
In 'normal' mode, it freezes my laptop after a few seconds.Hello
Why you don t give us more information about your problem? We don't know what unit you have? Is the original part of card or you have built at least?
At the moment I can just recommend you to reinstall the unit with recovery media. If the problem persists, try to install the card separately with the right driver. Otherwise, you must change the WiFi card or test it with the other.
Give us more information.
-
blue screen - only works in safe mode
I have a 1545 inspiron 1545 lap top only woks in safe mode are tried system don't restore chance andre, I can do?
[Moved from comments]
Hi Tony,
Blue screen errors can occur if a problem causes Windows 7 to stop or restart unexpectedly. You might see a message that says: "Windows was arrested to avoid damaging your computer."
These errors can be caused by hardware and software issues, and it can be difficult to solve the problem. The following methods and tools can often help get Windows running again.
1. what operating system is installed on your computer?
2. What is the code in the exact error message or Blue Screen of Death?
3. have you made any recent hardware or exchange of software on your computer before the show?
What version of the operating system Windows am I running? :
I suggest you remove all external devices except the keyboard and mouse and check if it helps.
I also suggest you follow the steps mentioned in the link below which may help you in the matter of fixing.
Resolve stop (blue screen) error in Windows 7:
http://Windows.Microsoft.com/en-GB/Windows7/resolving-stop-blue-screen-errors-in-Windows-7
Note: When you restore the system to a previous state, programs and updates installed later will be deleted.
Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
Warning: Before performing a reinstallation of Windows 7, should be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before you reinstall the operating system.
You can also download the last dump file so that we are able to help you. C:\windows\Minidump
You can use Windows Explorer and copy the dump files to your desktop or your personal documents folder. Then download them to your Sky Drive folder.
If you are not able to find the dump file, and then check if it has been activated. To so proceed as follows:
1. click on Start, point to settingsand then click Control Panel.
2. double-click on system.
3. click on the tab Advanced and then click settings under Startup and recovery.
4. in the Write debugging information list, click partial dump (64 KB).
For reference:
Send a copy of your dump file in a shared file on your disc of sky with a link here.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65To change the folder location for memory dump files, type a new path in the dump file box (or in the directory of small box discharge, depending on your version of Windows). You can go through the link for more information
http://support.Microsoft.com/kb/254649
I hope that the information above helps you.
-
computer only works in safe mode
Happens to Windows Logo and crashes, does not work in safe mode have lost Admin VAC and can't do a restore
pointmadmacca,
We could use a little more information.What version of Windows and service pack level are you?
Do you have an error message, and if yes what is it?
Nothing changed prior to the show starting (hardware or software)?When you start in Safe Mode, a minimal boot and will see if this you start normally.
Here is information on the clean boot: http://support.microsoft.com/kb/310353Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
LCD monitor only works in safe mode
I connected a new monitor and will work in safe mode. I tried to change all the settings in safe mode but nothing seems to work when I restart the computer in normal mode. Help, please
I'd like to see if you can install any software that came with your monitor.
There is another option to enter in Windows Vista, choose activation lower-resolution (640 X 480)... .or the VGA mode as it used to be called.
Try to install the drivers in safe mode if it does not work.
If these don't work, let me know the exact model you new monitor so I can see if I can find any known issues.
Mark <> Microsoft Partner
-
Graphics card only works in Safe Mode
Just did a clean install of Windows 7 and when re - installing the latest drivers Nvidia drivers do not work. I have a Nvidia GTX570 finds ok computer. I can only run in safe mode with the base windows graphics drivers so think the card works ok? can someone help?
Install and run the uninstall of the display driver, I remove all items from nvidia.
Uninstall the display driver. http://www.Guru3D.com/files-details/display-driver-uninstaller-download.html
Restart the computer.
Install the latest java.
http://Java.com/en/
Visit Nvidia Auto detect Graphics.
http://www.nvidia.com/download/scan.aspx?lang=en-us
-
Mouse and keyboard only work in safe mode... why?
Or work on restoring normal operation and all the images are blurred. Said one-stop two players work under ms - back! Someone help me?
If it works in safe mode it looks like it's the drivers. because in safe mode, it uses only basic MICROSOFT DRIVERS... go in safe mode, go to the DEVICE MANAGER (right click on computer and click on MANAGE then click on allow or continue if prompted, and then click Device Manager).
under the heading of the keyboard device, click on the '+' and then right click and uninstall all THE items in the CATEGORY of the KEYBOARD and click OK on all messages
then
under mouse/mice and other input devices , click on the '+' and then right click and uninstall all THE items in the CATEGORY of the mouse/mice and other input devices and click OK on all messages.
Then
Reboot and allow devices to relocate
-
computer freezing in desktop mode, only works in safe mode
computer freezes in desktop mode, it does not do anything. have been in safe mode of old stuff to clean desktop screen & also tried to uninstall anti-virus has frozen but towards the end.
Hello
You can check in performinig system restore in safe mode to a system restore point when the computer was working fine.The system restore. -
computer blocks only works in safe mode and error blue screen BCCode: 116
specifications of the computer.Windows vista Home premium 32-bitError Msg-stop enexpectedly
Signature of the problemProblem event name: BlueScreenThe system version: 6.0.6002.2.2.0.768.3Locale ID: 1033Files helping to describe the problem (some files may be is no longer available)Mini052711 - 01.dmpSysData. XMLVersion.txtSee a temporary copy of these filesWARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.Additional information about the problemBCCode: 116BCP1: CF 892 008BCP2: 90B 22036BCP3: 00000000BCP4: 00000002OS version: 6_0_6002Service Pack: 2_0Product: 768_1Information about the server: 2528169f-3730-4b08-b413-9ffae78c8aa8Hi Manju,
Remember to make changes before this problem?
If the computer works fine only in Safe Mode, then some present third party software on the computer may cause this problem.
Method 1: activate the boot and then check if the problem persistsFollow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.
Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
Method 2: you can follow the steps described in the article below, which addresses the problem of blue screenHow to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
-
HP SlimDesktop 450-a114: keyboard and mouse only work in safe mode
When that I starts normally, the keyboard and the mouse do not work and I can not connect.
If I boot in safe mode, the mouse and keyboard and I can open a session.
In safe mode, when I go into Device Manager, the device of keyboards is "HID Keyboard Device" and the mouse device is "mouse HID-compliant". What should I do?
Thank you
Mike
If it works in Mode safe is probably a driver issue because Safe Mode doesn't load any third-party drivers.
I suggest that you go into Device Manager"and uninstall the keyboard and the mouse. To restart Windows will detect the keyboard and mouse and reinstall the drivers, I hope as fixing the problem.
* You didn't say what version of Windows you use, so I could not be more specific on how to access the Device Manager.
If you found my answer helpful please say thank you by clicking on the icon of the thumb.
If my answer has solved your problem, please mark it as accepted Solution. Thank you! -
the computer restarts on startup and then only works in safe mode
I'm running out of options.
I have a MSI all in one pc which runs on windows vista Basic. I turn on my computer and it will show my lock screen, but just before I can type my password, it restarts itself and give me different options of safe mode. I tried a lot of different solutions, but none of them seem to work. Can anyone help me, please.
Hello
See if that helps you.
Do a Safe Mode system restore to before the problem started.
http://bertk.MVPs.org/html/restoresysv.html
How to access Safe Mode (which you already know)
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft
Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.
Here is the guide to repair Options using a Vista DVD from Microsoft.
If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.
http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/
Table of contents
- Overview of Windows Vista repair options
- How to perform an automatic repair of Windows Vista using Startup Repair
- Advanced Tools Overview
- Conclusion
If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.
Unfortunately, you have to buy it.
Here is a link to it:
http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/
See you soon.
-
The latest patch to update this system was .net framework 4
This behavior has occurred on several machines after a power failure in our factory caused all systems restart.
I have run chkdsk
I ran sfc
SafeMode internet works fine.
Clean boot does not solve the problem.
Cannot remove .net framework 4 because I can't get windows installation service to work properly.
X red on the connection in normal mode
I run with the reset.cmd file subinacl to reset all the registry settings. It gave no results.
I looked at all of the services that are running successfully in normal mode and those that are run in mode safe and that services to start. This got me internet again in normal mode, but we are far from finished there are a lot of services is still needed. I'll make one by an approach to see what will begin and what doesn't.
System Restore was successful, but had no bearing on the issue. Here's the solution that worked.
Safe Mode boot
on computers that are running Windows live onecar I ran as administrator onecare removal tool
Remove the Adobe Flash 10 utility
Open msconfig and services.msc
enable all services that are running in safe mode to run msconfig on the next reboot. Also enable required services for Windows updates and windows install
Enable
BITS, com +, Windows udpate, workstation and service server and all dependent services. If you miss some that is good because you and individual services and start them from services.msc when the next restart.
Restart the machine.
I found that after this reboot a few updates have been posted in the update list installed in the control panel that had not been previously listed.
Remove all instances of Java (cannot be done in safe mode)
Reinstall Java and flash player from their respective Web sites
I installed Microsoft Security Essentials www.microsoft.com/security_essentials
Run windows update and install the updates.
run msconfig and select normal startup
Restart and ensure normal operation.
It takes about 1/2 hour, 1 hour per machine which was much lower than a full reinstall.
-
Keyboard only works in safe mode
My keyboard was working fine, then one morning that I went to for use and he typed a letter can be stopped.
Checked the keyboard on another computer and worked very well. Batteries are fully charged.
I bought a new direct wired keyboard and that the keyboard wouldn't work either.
I tried EVERYTHING... So frustrated. The keyboard works perfectly fine in safe mode, but the minute I get out of safe mode, it will not work.
I have a mouse of keyboard / wireless Logiteck set. Mouse doesn't have problems...
SOMEONE PLEASE HELP!
Hello
Thanks for posting your query on the Microsoft Community.
According to the description issue that works your keyboard is fine in safe mode and on other computers. Thus, there might be a chance that there is some third party conflicts or startup services-Articles-application is causing the problem. It can also be generated if drivers get corrupted or need a update.
Try these steps and see if it helps you to solve the problem.
Method 1
Try to start the computer in a clean boot state and see if it helps you to solve the problem.
Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
How to perform a clean boot in Windows
http://support.Microsoft.com/kb/929135/en-us
Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.
Method 2
If the problem persists, try to remove all of the ghosts of your computer devices and then try to use the device. You can see the steps below.
Click Start
In the Search box, type command prompt .
In the list right click on command prompt and select run as administrator.
At a command prompt, type the following command and press ENTER:
Set devmgr_show_nonpresent_devices = 1IN the following line from the command prompt, type the following command and press ENTER:
Start devmgmt.msc.When the Device Manager opens, click on view
Now, click Show hidden devices.
Remove all the entries that exist for the keyboard and the USB category.
Close Device Manager , and then restart your computer.
Method 3
If the problem persists, try the steps in the article mentioned below and see if it helps you to solve the problem.
Note: There is place for Windows 7 also.
Troubleshoot the incidents of the response to the mouse or wireless keyboard
Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.
Kind regards
Maybe you are looking for
-
Windows 7 64-bit on Satellite A100
Hello world I have a few questions. I've got Satellite A100-294 (PSAA8E-02T026G3) and I was wondering is it possible to install 64 bit, win 7 on this machine? I have 4 GB of RAM, but it is really slow at the opening of some app (CS4, video editing, i
-
Tecra A11 - Video No. via mini DisplayPort
Hello I recently bought a mini DisplayPort-> HDMI cable to use with my Tecra A11 Notebook. My intention was to run two external displays by running a cable VGA for my LG W2242 monitor and run the mini DP to HDMI Cable to my HP 2509 m Monitor. Unfortu
-
Receive iMessage when no internet
Will I be charged by mobile service provider if I get iMessage of others when not internet available? How the iphone only receive message when I have internet?
-
where can I download the software of OS which is Windows 7?
-
There is a strange folder in my Options for the Protection of the system!
The tab System Protection in system properties, which gives you options of system restore, there is a system volume that looks like there's a number of clsid. It is outside the usual partitions. Is this normal? It does not appear in Windows Explorer.