Distance and rounds of training swimming errors

Similar Questions

• Microsoft Train Simulator error Setup error "Unable to verify the media" keeps coming back.

  Original title: Microsoft Train Simulator Setup error

  Try to install Microsoft Train Simulator on vista and when installing on the error 'Failed to check media' 2nd drive keeps coming back. Have also tried on another computer that has XP and the same results. Can anyone help?

  Hi Rick,

  Given that the CD does not work in Windows XP computer also, there seems to be a problem with the drive itself.

  Clean the CD or the DVD. To do this, use a disc cleaning kit. Or gently wipe the silver part of the disc with a soft and Lint cotton cloth.

  You can read the following article and check.

  Error message or the game stops responding on the "Loading" screen when you start a Microsoft game: "insert the right CD.

  If you are always faced with the question, so you may need to replace the drive.

• I have a HP LaserJet 4345 and I get an EIO Error 80.0088. Clues? hard drive?

  Hi all

  I have a HP LaserJet 4345 and I get an EIO Error 80.0088. This could be just a hard drive error?

  Thank you all who responded.

  EIO 80 errors point to a jetdirect question. I believe that all of the 4345 established the network so it can point to a bad trainer.  If the device has a record live map jet, you can simply replace.

  If you can access the configuration page print it to see if the ip address is correct.

  I would like to try, then a cold reboot which will reset all functions return printers factory, including your IP info so that will have to be reinstalled after the cold reset.

  Also take a look at the attached document on the HP jetdirect firmware update.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=bpj05999

• I opened a Web site and it gives a 404 error

  I opened a Web site and it gives a 404 error, the content is not loading. What should I do?

  404 error is not related to firefox. It's because of the Web site. the page you access is really absent. can be deleted by the site owner. This is why you see this error. It is not related to firefox

• I did a reset on my iPad 2 and now it has an error with iTunes saying that it requires a newer version of iTunes. How to upgrade the iPad I have tunes version?

  I did a reset on my iPad 2 and now it has an error message when I connect to my computer to access the backup. bed the error message, this iPad cannot be used because it requires a newer version of iTunes. How to upgrade the version of the ipad?

  Take a look at the article, download the latest version of iTunes - Apple Support

• OfficeJet 6700 analysis via radio to 90% and then fails with an error of communication

  New HP Officejet 6700 Premium; no error during installation; -device not scan via radio: scan to ~ 90% with the visible image in the preview is when inaccessible window of the Scanner is returned with the error message "Scannner communication cannot be established.  Ensure that your product is turned on, check the connection... ».

  Dell Inspiron E1505 laptop. Vista; Trend Micro Titanium 2011 Dell

  1. Network wireless, print, fax work very well.
  2. Software has been uninstalled, cleaned and resintalled.
  3. Fixed IP address received.
  4. Windows drivers are the most common, HP device firmware is up-to-date.
  5. When the trend is disabled, scanning works completely.
  6. All scanning functions and work completely through USB with active trend.
  7. MS Paint scanning to the device wireless without problem with active trend.
  8. Ports below were opened in the Windows Firewall.

  TCP UDP
  137 137
  138
  139
  161

  427 427

  9100

  9220

  9500

  • Printing and scanning doctor works and ends when the trend is disabled.
  • Print and scan doctor hangs up on Scan Test and returns the same communication error window when the trend is activated but no further information or help.
  • Contacted Support of trend, which has provided information on how to create an exception in the product and advise him to: "... to add the file scanner to the program exceptions list."   Trend has been unable to give advice on what specific HP or the files to add to the exceptions list.
  • File by file, the following files have been added to the list of exceptions of trend without effect:

  C:\Program Imaging\devicemanagement\hpzscro1.exe HP

  C:\Program 6700\bin\HP Officejet HP Officejet 6700.exe

  "\HP Officejet 6700UI.dll.

  '\HPNetworkCommunicator.exe '.

  '\HPScan.exe '.

  '\HPScanDisco.exe '.

  ScanToPCActivation.exe

  ScanToPCActivtionUI.dll

  Toolbox.exe

  ToolboxUI.dll

  C:\Windows\twain_32\HP Officejet 6700\HPScanUI.dll

  '\Scanapp.ini '.

  '\hpxsTwain.ds '.

  • Device IP address correction has been added and listed as an exception in Web site.
  • Other computers are able to scan wireless unit.

  Are there other HP file or file windows called scanner of HP who participates in the scan Communication that must be added or tried?

  A short history:

  After spending 4 hours and countless computers, printer, router restarts, channel changes etc, on the phone with HP printer support, to solve this problem, I was called back to my firewall provider (Trend Micro) when the product is disables scan works. (Yes, it's the same question that I started.)  As you can imagine made me unhappy...? Since I had already made contact with them for advice on how to configure the product before posting here in the first place and, possibly, appellant assistance from the printer.

  The solution was finally trend had me to rename a file in the registry, which, I presume, caused the trend product regenerate a clean version of the file.  As trend firewall exceptions had already been saved, scan over wireless works now! I post the location of the file and registry name, unless you use the identical product etc. to modify your registry database is scary business.

  Naturally, because it was just going to be like that, scan network worked, but then the network printer showed offline and I couldn't online despite shooters evil etc.  In the end today I completely uninstalled the product and the resinstalled it and now everything works.  Hard to be too crazy about HP, when, notwithstanding this saga, HP was right to send back me the vendor of the firewall... everyone gets their turn in the barrel of the dysfunction of the technology, and it was mine.

  What a striped set incredibly complicated of technologies that we depend on.  Travis, thanks for your help and trying on it.

• I just tried to update Firefox to version 9.0.1. Extract of 13%, and then I got an error message cannot open output file. Can you help me please?

  I just tried to update Firefox to version 9.0.1. Extract of 13%, and then I got the error message cannot open output file.

  The file can be uploaded incorrectly. Could you it redownload again from http://getfirefox.com?

• Satellite M30 is not unbootable HARD drive and I can find no error

  When I start the laptop, I get only a black screen (after the Toshiba/Bios screen) and a flashing cursor. Nothing else happens. I didn't like the change of configuration, updates etc. before that happened.
  I am able to start the computer from the CD (with a XP pro CD or UBCD4win) drive and access the hard drive (so I was able to copy all of my data to an external hard drive), it does not start only windows (XP Professional SP3) from this drive!

  Using UBCD4win, I ran diagnosis tools like memtest and TestDisk, without any reported errors. I also ran DFT (drive fitness test) of Hitachi (which is my hard drive manufacturer). Have not found errors, too. I also tried the repair install of windows, which went very well, but has not changed the situation at all. Also, I tried fixboot, fixmbr and bootcfg/rebuild of the recovery console, does not solve the problem. Load default BIOS - no change. I'm out of ideas...

  So does anyone have an idea what's wrong with the system? I find no error, but this thing just does not start from the hard drive. Any idea/input is very appreciated!

  Hey Buddy

  > there must be a way to solve the problem without having to reinstall the entire system.
  I doubt that!
  Not all problems can be solved without having to reinstall Windows.

  I know this is strange and it takes a lot of time to install all your programs, but I think that in this case, it is the only solution for this. I mean you have tried many things and if a Windows repair installation does not, for me are obvious: a relocation complete!

  You can spend more time to solve this problem without having to reinstall Windows, but don t forget you can do a complete new installation at the same time.
  Think about it! ;)

  Good luck!

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• I'm moving my iphone iOS 5 6.14 to iOS 9.2.1 and I m getting the error below: cannot install the update ios 9.2.1 Please help installation error!

  I'm moving my iphone iOS 5 6.14 to iOS 9.2.1 and I m getting the error below: cannot install error install ios 9.2.1 update.

  what I can't finish the upgrade because of this error, please help immediately, thanks!

  As you change major versions (6-9), the complete installation program must be downloaded. Then, it must be verified and unpacked. Then to do room to write the new while the former is still partially around. He spells that require at least 6-7 GB of free space on the device for an Over The Air update to even have an inkling of a chance to succeed.

  If you do using the iTunes program on a Mac (favorite), download, verification and unpacking occurs in the computer (which has usually a lot more resources than the phone), reducing needs about 1 to 2 GB free space.

• How do I trouble and get rid of the error Code: rundll32.exe on my MacBook Pro?

  How do I trouble and get rid of the error Code: rundll32.exe on my MacBook Pro?  The heading reads as follows: of "http://Mac support1. com ".  I can't remove it from Safari.  It is also IMMEDIATELY said 'call APPLE to 1-844-335-2242 '.  I asked that this number.  Any help would be greatly appreciated.

  Choose force quit from the Apple menu, close Safari and then run it with the SHIFT key is pressed. If the message reappears, disconnect the computer from the Internet and close the tab Popup came.

  (138334)

• Microsoft never takes a look at the error reports I send?... it doesn't seem that you do because nothing is solved and I get the same error reports!

  I've been having problems with my computer, I continue to send error reports, but apparently, no one throws a look at them at the other end, because I keep having the same problems.  Is there really someone in Microsoft who take a look at the reports we submit?  I would really like to know!

  If you see messages like this:

  Please inform Microsoft this problem

  We have created an error report that you can send to help us improve Generic Host Process for Win32 Services.
  We will treat this report as confidential and anonymous.

  Send error report do not send

  I wouldn't count on return all useful 'response' of MS because allegedly they do not have any of your information (so how would then be able to communicate with you?) if they do not have your information, they say they will definitely preserve confidentiality, but maybe one day your contribution will help the best ways to handle errors and respond in a way that actually works to understand.

  If you choose to send things, don't forget to give long enough the process — sometimes several minutes and you will get a message back that may or may not be interesting to read, but they are usually generic "Thank you for your comments" type messages.  Sound familiar?

  If it is a known problem with a solution, you can be lucky and get some tips on how to solve this problem, but I wouldn't count on it and have never actually seen it work out that way, but I could at least give the error notification mechanism a chance and see what he has to say.  You can also find out more about works XP when you are finished.

  Some people feel that potentially sending your system information (and who knows what else) Microsoft is an intrusion into their privacy and choose to disable the function of «»  Who knows what information you send to Microsoft when you click send error report.

  If you want to know how to disable this feature, let us know and I'll tell you how.

  You probably better to solve your problem in the system the old fashioned way... by yourself (and with the help if you need it), I would like to ask a new question in the appropriate forum.

• lost my sound and now I have this error # 0X800A0ice

  My Windows Internet gave me the local problem.

  Then I lost my sound and now I have this error # 0X800A0ice.

  Need help now.

  Hello

  1. what operating system do you use?

  2. what version of internet explore do you use?

  3. What is the exact error message you received?

  4 did you change on your computer?

  I suggest you follow the link and check.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/ro

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490).

  The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490). I tried in several ways through the links suggested to solve the problem and nothing has worked.

  
  

  I turned to the forums and I saw that many, many people have the same problem with Vista SP2 Upgrade. Microsoft and several of its Vista customers realized that Vista has a lot of problems, but people who have need of the service. Being able to download and install the SP2 can make Vista more stable, but I get the same message mentioned above, and so I am sure are a lot of other people who are trying to get Service Pack 2 integrated into Vista.

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services

• I play runescape and lately to get java error on my desktop icons very much, they are labeled hs_err_pid followed 3 different numbers, help please

  I play runescape and lately to get java error on my desktop icons very much, they are labeled hs_err_pid followed 3 different numbers, help please

  Hi madsman,

  Thank you for using Microsoft Windows forum

  For better support please give us the exact error code.

  This could well be a virus problem. If your step would be to run a full scan of PC online using the following link:
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm
  Then, go to your Control Panel and open "Programs and features" and tell us what version of the Java Application you have.

  If you have a Version that is older, then you must remove the older version of "Programs and features" and install the latest version by visiting here: http://www.java.com/en/download/manual.jsp

  It is normally acceptable to load new versions of Java on top of older versions, but in this case we want to start over with a latest full version.

  Scroll down a bit to the "Download Windows Section" and download/install "Windows 7".

  After download/install this newer version. Close all windows and applications that may be running and "restart" your computer.

  Then click the link once more to return to the download page and select the link that reads "Check Java has been installed properly" If the application downloaded/installed correctly then this test will let know you that Java is working properly.

  Your last step would be to run a malware scan using this link:

  Malicious software removal tool: http://www.microsoft.com/security/malwareremove/default.aspx

  Kind regards
  Aziz Nadeem - Microsoft Support