Distiller will suddenly end/crash the * SECOND * time I open a file for conversion to PDF.

The subject says it all: Distiller will suddenly end/crash the * SECOND * time I open a file for conversion to PDF.

But I think I have an idea why this is happening. In general, I use Distiller to convert EPS or PS files as PDF files. In addition, almost without fault, I incorporate the required (only of Type 1) fonts directly in files EPS/PS (using the required format to PFA) so no local fonts on my computer are needed to be looked at to distill in to be embedded in the file PDF. they are already in the EPS/PS files.

But yesterday, I tried to convert EPS/PS files to PDF using Distiller in which I had NOT embedded fonts Type 1 (PFA format, of course) in the source of EPS/PS files. All first this conversion would work (in which I select "open" and choose an EPS/PS file for conversion), but after this initial conversion, the * SECOND * time I clicked "Open" the file, Distiller would immediately close/crash.

Then, I searched the web for answers and discovered that some people have trouble distilling to initialize if all their computer system fonts were read-only. So I went back to my EPS/PS files and embedded fonts Type 1 (PFA format) required in them and then - as if by magic - distill worked without a hitch: I could open and convert any number of them in succession, with distilling never close / crashing.

Then, I found the reason why distilling had been crashing at the second attempted to open a file (once again, simply by pressing the "open" button to find a file to convert, * no * after selecting a file) must have something to do with distilling scanning fonts installed on my computer, when there was no PFA font incorporated to make reference to , and a read only font on my system was the cause of the problem. However, I have looked in both places of logic where my fonts must be located (c:\psfonts and c:\windows\fonts), but found * no. attributes * files fonts defined in 'read only' so, I'm stumped.

I use Distiller Pro 10.1.1316 (acrodist.exe) on a machine to earn 8.1. I found similar positions, which dates back to 2004, about Distiller crashing immediately after opening when certain fonts are read-only; I haven't found a post about anyone successfully using Distiller to convert EPS or PS to PDF and then have the program crash when the "Open" button is pressed subsequently. The clues, anyone?

Background: Distiller Server is a product discontinued long - ago - use of Distiller server is now simply prohibited, and LiveCycle PDF Generator is available for servers.

Since you are not using Distiller Server and this forum is essentially abandoned, I recommend that you try the Acrobat - forum creation (etc.) instead.

Tags: Acrobat

Similar Questions

  • I get a pop up message the first time I open Photoshop CC for the day, "we sorry that we are unable to connect to the server from adobe at the moment..." I followed instructions to turn off my antivirus and firewall, then open it. But the problem still re

    I get a pop up message the first time I open Photoshop CC for the day, "we sorry that we are unable to connect to the server from adobe at the moment..." I followed instructions to turn off my antivirus and firewall, then open it. But the problem still remains. What can we do?

    Moved to this discussion in the creative forum cloud download & install.

    R.O.B. Please see Sign in, activation or connection errors. CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for more information on how to resolve the error of connection between the computer and our activation server.

  • I set Google as my homepage. The next time I open it, Google opens as my homepage, but the next time I open it, it goes back to Firefox. Why it will remain not as

    After that I set Google as my home page, it will not stay as my home page. The first time I open Firefox after you set Google as my home page, it will work. But the next time I open Firefox, it is back to the opening of the Firefox home page. How can I get there like Google?

    See:

  • My Pavilion G7 suddenly can't recognize the WiFi Signal for the second time in a year

    Hi all

    My flag is about two years old and the

    motherboard has been replaced by HP in virtue

    warranty.

    For the second time in nine months the laptop suddenly can't recognize my router

    WiFi signal. This time if I do a system reinstall, I'll have to reinstall 50 apps! I try to avoid this if possible. I understand that changing the bios settings can set wifi problem but no idea how this step will affect files (delete/save). Upgraded to WIN7 to 8 to 8.1. Help, please. Thank you very much.

    Hi BHK6,

    Yep, installation of adapter Qualcomm Atheros WiFi update worked!

    It worked immediately, but I wanted to give him a full 24 hours or more to see if the fix stuck.

    This problem seems to be resolved.  Now I can finally return to my much delayed project.

    Thanks a lot for helping me through this. :-)

    Robert

  • For the second time in two months, all my messages in the Inbox are not there. Only the SUBJECT and the FROM is left. Tried to 'fix this folder' and lost ALL

    For the second time in two months, all my messages in the Inbox are not there. Only the SUBJECT and the FROM is left.

    Tried to 'fix this folder' and ALL - lost ALL the Inbox.

    The file is still there and works well...

    How can I stop it and what are the causes?

    Thank you all, Gabe

    If you have the file somewhere on your hard drive, export and import tools it will be important back to Thunderbird.

    https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/

    Instructions http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html

  • Dial 1172 error, a run-time error of a VI in the second time in the DLL

    Hi all

    I am a beginner in labVIEW.

    I have to write a test program in labVIEW that uses a DLL created by another programmer.

    I called the DLL of my labVIEW for control of DIOs, a serial port, communicate with a slave device, a flashing task.

    During the test program, I found that the program is OK if I use it just once, however, if I want to execute coninuously using one-loop While, it failed with

    Error 1172.

    As far as I could understand, it seems that the DLL creates a log file in C:\ so that he was called for the first time, and the process does not take control of this logfile even after the closure of the DLL.

    Then when the DLL is called for the second time, it looks for the same log file to write new info, but as he was taken control by the previous process, there is an error.

    Please find the attached files.

    Hope there will be someone who can help me to point out my mistakes in my vi or suggest me a solution for this.

    Thank you and best regards

    Aung

    (Because the system does not accept the attachment of the DLL, I changed the extension to .pdf for the DLL file)

    This is the DLL file (I have lack of attachment in the post)

  • Automation error: The object invoked has disconnected from its clients when the exe to exectuted the VB6 for the second time

    Dear all,

    I had this really common automation error when I run an exe file created by Visual Basic 6 for the second time. Whenever I ran the program for the first time that it works really well. But the second time always fails. When I ran in debug mode in Visual Basic 6, sometimes it worked. I checked the code and found it would be discontinued in the next part - CommonDialog1.ShowSave.

    ReDim SelectedVar (1 NumSeleVar)
    ReDim SelectedVarTxt (1 NumSeleVar)
    I have = 1
    For j = 1 To NumVar_GasPlants
    If chkOpt (j - 1). Value then
    SelectedVar (i) = j
    SelectedVarTxt (i) is chkOpt (j - 1). Legend
    i = i + 1
    End If
    Next J

    'Get the name of the export file.
    If not g_RunOutputMacro then ' check-out
    CommonDialog1.cancelError = True
    CommonDialog1.InitDir = curCasePath
    If IsMonteCarlo then
    CommonDialog1.FileName = "HourlyData_GasPlants_" & cmbYear.Text & "_" & cmbMonteCarlo.Text & ".csv".
    On the other
    CommonDialog1.FileName = "HourlyData_GasPlants_" & cmbYear.Text & ".csv".
    End If
    CommonDialog1.Filter = ' (*.csv) | * .csv.
    CommonDialog1.FilterIndex = 1
            CommonDialog1.ShowSave
    SelectedOutputFile = CommonDialog1.FileName
    On the other
    SelectedOutputFile = g_Output_FileName
    End If

    I have been tormented by this problem for almost a month. Any suggestions or ideas would be very appreciated!

    Thanks a lot guys!

    Hello

    This problem would be treated better in the MSDN Visual Basic forums. Expertise it can help you with this problem.

    https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?Forum=vbgeneral

    Thank you

    Stephanie Podder

  • Hello - I have used CC for about 1.5 years, I work on my Mac fixed in my office and also on my Mac Powerbook. For the second time, I can't work on the Powerbook - I can´t reach my documents - nothing happens if I have the latest version on both

    Hello - I have used CC for about 1.5 years, I work on my Mac fixed in my office and also on my Mac Powerbook. For the second time, I can't work on the Powerbook - I can´t reach my documents - nothing happens if I have the latest version on both computers. What's not?

    Hello

    Please help us to better understand.

    What message did you while accessing your documents?

    Do you have a white screen on the creative cloud App:

    You can refer -:new Creative Cloud application unusable: it is empty!

    and also try:-screen black at sign - in | Creative Office Cloud app

    Wheel rotation under apps:

    Please check the help below document:

    Does not open App | Wheels of progress turn continuously

    You can also view the nets below where this issue has been addressed:

    Adobe Creative Cloud / Desktop App / Home Screen: constant spinning wheel

    Creative Cloud Desktop App taped blue spinning wheel after update.

    For messages from the server:

    Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

    Creative cloud will not - can not get on the servers, perhaps because the firewall blocks

    Hope this helps!

  • On the second time that I return to the button, it doesn't work anymore?

    Hello

    Hey well im still busy making an animation, and I got stuck.

    The animation is as follows: I have 15 active buttons at the moment, I've programmed only 1 so far. If I click this button 1 (linkslinksboven_btn), he goes to a certain slice, in this case the 181 framework. In 181, I have 4 new buttons 1 is programmed, if I click on this button (linkscirkellinks_btn), I did some lines go to a color and a letter "M" is now 10 times for 10 seconds. After these 10 seconds little animation stops and I have to click a button (onzichtbareknoplinkslinksboven_btn), which dates back to where my 15 buttons are active should be the frame 180, so all 15 are able to get clicked again. If I click the button, it shows my 15 buttons but when I click on the 1 I programmed and used earlier, it does nothing?

    Here are all the coding on my first keyframe:

    -Frame stop @ framework 180-------.
    addEventListener (Event.ENTER_FRAME, onEnterFrame180);

    function onEnterFrame180(e:Event):void {}
    If (currentFrame == 180) stop();
    }

    -Knop linksmidden_btn-------.
    linksmidden_btn.addEventListener (MouseEvent.CLICK, linksmidden_btnClick);

    function linksmidden_btnClick(event:MouseEvent):void {}
    gotoAndPlay (180);
    }

    -Knop linkslinksboven_btn-------.
    linkslinksboven_btn.addEventListener (MouseEvent.CLICK, linkslinksboven_btnClick);

    function linkslinksboven_btnClick(event:MouseEvent):void {}
    gotoAndPlay (181);
    }

    -Knop linksrechtsboven_btn-------.
    linksrechtsboven_btn.addEventListener (MouseEvent.CLICK, linksrechtsboven_btnClick);

    function linksrechtsboven_btnClick(event:MouseEvent):void {}
    gotoAndPlay (182);
    }

    -Knop linkslinksmidden_btn-------.
    linkslinksmidden_btn.addEventListener (MouseEvent.CLICK, linkslinksmidden_btnClick);

    function linkslinksmidden_btnClick(event:MouseEvent):void {}
    gotoAndPlay (183);
    }

    -Knop linksrechtsmidden_btn-------.
    linksrechtsmidden_btn.addEventListener (MouseEvent.CLICK, linksrechtsmidden_btnClick);

    function linksrechtsmidden_btnClick(event:MouseEvent):void {}
    gotoAndPlay (184);
    }

    -Knop linkslinksonderbovenkant_btn-------.
    linkslinksonderbovenkant_btn.addEventListener (MouseEvent.CLICK, linkslinksonderbovenkant_btnClick);

    function linkslinksonderbovenkant_btnClick(event:MouseEvent):void {}
    gotoAndPlay (185);
    }

    -Knop linkslinksonderonderkant_btn-------.
    linkslinksonderonderkant_btn.addEventListener (MouseEvent.CLICK, linkslinksonderonderkant_btnClick);

    function linkslinksonderonderkant_btnClick(event:MouseEvent):void {}
    gotoAndPlay (186);
    }

    -Knop linksrechtsonderonderkant_btn-------.
    linksrechtsonderonderkant_btn.addEventListener (MouseEvent.CLICK, linksrechtsonderonderkant_btnClick);

    function linksrechtsonderonderkant_btnClick(event:MouseEvent):void {}
    gotoAndPlay (187);
    }

    -Knop linksrechtsonderbovenkant_btn-------.
    linksrechtsonderbovenkant_btn.addEventListener (MouseEvent.CLICK, linksrechtsonderbovenkant_btnClick);

    function linksrechtsonderbovenkant_btnClick(event:MouseEvent):void {}
    gotoAndPlay (188);
    }

    -Knop rechtsonderkant_btn-------.
    rechtsonderkant_btn.addEventListener (MouseEvent.CLICK, rechtsonderkant_btnClick);

    function rechtsonderkant_btnClick(event:MouseEvent):void {}
    gotoAndPlay (189);
    }

    -Knop rechtsbovenkant_btn-------.
    rechtsbovenkant_btn.addEventListener (MouseEvent.CLICK, rechtsbovenkant_btnClick);

    function rechtsbovenkant_btnClick(event:MouseEvent):void {}
    gotoAndPlay (190);
    }

    Here is the coding to the second keyframe to the 181 Member:

    Stop();

    -Knop linkscirkellinks_btn-------.
    linkscirkellinks_btn.addEventListener (MouseEvent.CLICK, linkscirkellinks_btnClick);

    function linkscirkellinks_btnClick(event:MouseEvent):void {}
    gotoAndPlay (182);
    }

    -Knop linkscirkelboven_btn-------.
    linkscirkelboven_btn.addEventListener (MouseEvent.CLICK, linkscirkelboven_btnClick);

    function linkscirkelboven_btnClick(event:MouseEvent):void {}
    gotoAndPlay (183);
    }

    -Knop linkscirkelrechts_btn-------.
    linkscirkelrechts_btn.addEventListener (MouseEvent.CLICK, linkscirkelrechts_btnClick);

    function linkscirkelrechts_btnClick(event:MouseEvent):void {}
    gotoAndPlay (184);
    }

    -Knop linkscirkelonder_btn-------.
    linkscirkelonder_btn.addEventListener (MouseEvent.CLICK, linkscirkelonder_btnClick);

    function linkscirkelonder_btnClick(event:MouseEvent):void {}
    gotoAndPlay (185);
    }

    And then finally on my last keyframe so far to frame 481:

    Stop();

    -Knop onzichtbareknoplinkslinksboven_btn-------.
    onzichtbareknoplinkslinksboven_btn.addEventListener (MouseEvent.CLICK, onzichtbareknoplinkslinksboven_btnClick);

    function onzichtbareknoplinkslinksboven_btnClick(event:MouseEvent):void {}
    gotoAndPlay (180);
    }

    Anyone know why I can't click on the linkslinksboven_btn when I get to this image for the second time?

    Any help or advice even to my easyer approach are welcome! I am open to learn. =)

    Dear greetings,

    Coyke

    Probably, you need to have the code buttons of your framework 180 instead of any previous setting.  If 15 buttons end at framework 180, but the code for them is to frame 1, then when you move out of the frame 180 you essentially lose the buttons, and if you are relocating to the 180 framework, there is no code to assign a feature of the buttons.

  • For the second time in six months, Thunderbird seems to have lost all my emails content.

    I have Thunderbird loaded on a MacBook Pro. For the second time in six months, disappeared the conent of all emails. I have a list of emails, but the content does not appear in the reviewing pane or if I open the e-mail. I made no changes to the computer Professor at Thunderbird. It's very frustrating! Any ideas as to what is happening?
    Mike

    Do you also have an anti virus program for the second time in six months has quarantined you Inbox?

  • Office Jet 8610: Device appearing is not in the device tab connected hp after entering the claim code (for the second time)

    I got the claim code to register my hp device connected for the second time and on both occasions, it doesn't have to be displayed in the devices tab.

    I tried a disconnection and logging into my account, but this has not solved the problem.

    I tried the two Chrome Version 39.0.2171.95 (64-bit) and Firefox 31.0 on a MacBook Pro running Mac OS 10.9

    Printer is an Office Jet 8610

    Web services are enabled and the printer is connected to the network.  I created the computer print jobs and they have successfully completed.

    * beep *?

    The problem disappeared after I checked my email address

  • IllegalStateException when Date by selecting the second time by using the date picker.

    I didn't think you could add a DatePicker to a field, and the only way to use the component is to use the method. doModal(). So I created a button which FieldChangeListener calls the method. It works the first time I click on the button and select a date, but the second time I get IllegalStateException.

    datePickerButton = new ButtonField("Date", ButtonField.CONSUME_CLICK | ButtonField.FIELD_RIGHT);
    datePickerButton.setChangeListener(new FieldChangeListener() {
        public void fieldChanged(Field field, int context) {
            UiApplication.getUiApplication().invokeLater(new Runnable()
            {
                public void run()
                {
                    datePicker.doModal();
                    datePickerButton.setLabel(SimpleDateFormat.getInstance(DateFormat.DATE_SHORT).format(datePicker.getDateTime()));
                }
            });
    
        }
    });
    

    Thread [Ritis_Maps (181) id = 295359488] (Suspended (exception IllegalStateException))
    SpinBoxDateTimePickerView (field) (Manager, int) .setManager line: 5399
    DateTimePickerDialog$ ConfirmManager (Manager) .insertInternal (field, int) line: 2203
    DateTimePickerDialog$ ConfirmManager (Manager) .add (Field) line: 545
    DateTimePickerDialog$ ConfirmManager. Line (field, ButtonField, ButtonField): 307
    DateTimePickerDialog. (DateTimePicker, XYRect, long) line: 94
    DateTimePickerController.getDateTimePickerScreen (XYRect) online: 332
    DateTimePickerController.doModal (int, XYRect) line: 340
    DateTimePickerController (DateTimePicker) .doModal () line: 255
    AdvancedIncidentListOptions$ 5.run (line): 193
    Line .dispatchInvokeLater (Runnable, object, int) UImain (Application): 1456
    UImain (Application) (Message) .doProcessNextMessage line: 2088
    UImain (Application) (Message) .processNextMessage line: 1530
    UImain (Application) () .enterEventDispatcher line: 1371
    UImain.main (String []) line: 24

    Maybe the datePicker does not clean themselves properly and you must create a new instance each time. I guess that since there doModal there are a few static fields/methods within the class to reiinitialized on each call.

  • Has been able to play games downloaded the first time, but can't open the second time I try

    Original title: could not open the file

    I downloaded a few games and the first time, I could read, but when I tried to open the second time, they just won't open.

    It would show the loading symbol, but nothing happens?

    Help?

    Hello

    • Did you follow the steps?

    Try to run the game in compatibility mode and check.

    Make the programs more compatible with this version of Windows

    http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

    If the problem persists, try to uninstall and then reinstall the game and check if this may help. You can also post your question in the support forum for Big Fish Games and control upgrade game.

    http://forums.bigfishgames.com

    Hope this helps

  • I get a message saying "drive does not have the ability to access this service and I just paid for 12 months (FOR THE SECOND TIME) in the last two months!

    I get a message saying "drive does not have the ability to access this service and I just paid for 12 months (FOR THE SECOND TIME) in the last two months!

    Hi phillipt84805120,

    Make sure that you have the latest Adobe Acrobat Reader DC (Adobe Acrobat Reader DC install for all versions) installed on your computer to use the services of export to PDF as the older version of Reader support any more.

    Alternatively, you can use services online at https://cloud.acrobat.com/exportpdf

    Let me know if you are still having a problem.

    Kind regards

    Nicos

  • Animation animate edge does not start the first time I load the page. But the second time.

    Hi all

    I have problems with animation of edge on a web page. It does not load the first time the page is loaded, but charge very well the second time or at any time after that. To test I empty my cache, then reload the page. It seams to work in Internet Explorer, the first time, but not Firefox or chrome.

    I have a temporary copy of the page here... http://emiwip.com/Monique-Mathieu/landing-page-WIP.html

    Can someone tell me what is happening?

    Thank you.

    Dan

    I found the answer here... Publication is no longer works in the latest edge

    It seems that you need to load the last jQuery in the head of the pag. That suits him.

    Dan

Maybe you are looking for