Distribution of the source with dll error

Similar Questions

• Distribution of the source - unit test dependency problem

  Hello

  I developed and API and I want to make the distribution of the sources, however my faulty build (error message is below) due to the error of reclassification of the Unit Test framework that I use to test my code. All Unit Tests are in the same folder, called "UnitTests", which is a part of a class. If I delete the UnitTests from the class folder, source distribution is created as expected. I try to put the folder always excluded UnitTests, but it does not help.

  I use LV 2012.

  Any ideas what I am doing wrong?

  Thank you

  Andrej

  Error message:

  LabVIEW does not find a file that is a dependency of a startup, exported or always included VI.

  File not found: the file "C:\Program Files (x 86) \National 2012\vi.lib\utf\dialogs\utf_defocus_trees.vi" must have the qualified name of "NI_UnitTestFramework.lvlib:utf_defocus_trees.vi", but it has the qualified name of "utf_defocus_trees.vi".

  The missing file can be referenced by one of the libraries included in the compilation or the file - CircularBuffer.lvlib. To resolve this problem:

  -Open all the startups, exported or always included live, recompile them (CTRL-SHIFT click the Run arrow) and keep them to update their dependencies.
  -Open libraries included in the building and check the existence and the location of the referenced files. Also, try building with the option of additional exclusion, 'Delete unused library of the project members', verified.

  Is attached to a fixed version of utf_defocus_trees.vi.  Place it in your \LabVIEW 2012\vi.lib\utf\dialogs directory .

  In addition, you might want to load/save utf_test_properties_sub.vi to get rid of the dirty dot.  This VI is located in the: \LabVIEW 2012\resource\framework\providers\utf.

• HP Deskjet 2540: installed printer now get the HP StatusBl.dll error

  I have a new Dell computer.  I have a Windows 7 with a free upgrade to a Windows 10.  While Windows 7 I have intalled a HP Deskjet 2540 printer then computer upgraded to Windows 10.  Now on Windows 10.  I uninstalled the printer HP Deskjet 2540 and now get the HP StatusBL.dll error every time when I start the computer.  I drive and looked at disk to find L4uninstall.exe and can't find it.  The disc has a Util directory but no directory of CCC in the Util directory.  How can I get rid of this error at startup of the computer.  I love the HP products!

  Hello

  The error returns after a shortcut remaining once the software has been uninstalled.

  From file Exploer type %appdata%\Microsoft\Windows\Start Menu\Programs\Startup in the address bar and press ENTER.
  Delete the shortcut to monitor alerts to 2540 printer ink and the error should appear is no longer.
  
  Kind regards
  Shlomi

• Another: failed: cannot create a snapshot VSS of the source volumes. Error 2147549183 but on XP Pro

  I am changing a laptop Windows XP Pro using the converter software 4.0.1.

  He will start the conversion process, but after 10 seconds or so, I get the error: failed: cannot create a snapshot VSS of the source volumes. Error 2147549183

  The strange thing is my images of box Vista successfully without problem.

  I'm in a corporate environment. I moved the laptop test I try the image of an OU restrictive and placed in a non-restrictive ORGANIZATIONAL unit (without firewalls and others). I always have the same question.

  I made sure all the VSS services and these are running and active. I even tried MS KB Article 941956 comes to do even if it said it was only for Server 2003.

  Any other pointers on this? It seems that a lot of people get this error, but the only ones I can find are for server operating systems... not XP.

  In the event under application Viewer I have errors of:

  Type: error

  Event ID: 12292

  The volume shadow copy Service error. Error creating the Shadow Copy Provider COM with CLSID {65ee1dba-8ffa-4a58-ac1c-3470ee2f376a} class

  Type: WARNING

  Event ID: 4356

  {The COM system + impossible to create an instance of the Subscriber partition:{41e90f3e-56c1-4633-81c3-6e8bac8bdd70}!new:{d3938ab0-5b9d-11d1-8dd2-00aa004abd5e}. CoGetObject returned HRESULT 80070005

  Type: WARNING

  Event ID: 4353

  The event of COM + a system attempted to raise the EventObjectChange::ChangedSubscription event but received a bad return code. HRESULT was80040201

  Type: error

  Event ID: 8193

  Volume Shadow Copy Service Error: Unexpected error calling routine CoCreateInstance. HR = 0 x 80004002

  You are able to start these three services; EventSystem, swprv, vss?

  What is this command returns; "vssadmin list writers"?

  Joakim

• I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  Hi Izzy Nagar,

  ·         Exactly when you receive this error message?

  ·         Did you do changes on the computer before the show?

  ·         Do you have any extended monitor connected to the computer in the past or at the present time?

  Follow the suggestions below for a possible solution:

  Method 1: You can try to reduce the resolution of the screen (lower), then check if the message still appears.

  Check also if the refresh rate of the monitor is set correctly and check the manual of the monitor for assistance.

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality

   

  Flicker of the correct monitor (refresh rate)

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  Method 2: Use the option ' enable video low resolution (640 × 480) "start, then update your video card driver and check if the problem still persists.

  a. click the Start button, click the arrow next to Shut Down and then click on restart.

  b. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.

  d. connect to your computer with an account of a user who has administrator rights.

  e. If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see the article:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• Deeper debugging on the "deployment operation failed on the agent with an error...".

  I tried to deploy a very simple plugin, a couple of settings with Snmp Fetchlet. Nothing complex.
  
  ILINT pass (although I'm not specifying a file of target.xml as examples and models do not seem to correspond to what expected the DTD), here is the result:
  -bash-3, 00 #... /emctl ilint d 0-i sysman/emd/no_targets.xml m sysman/admin/metadata/my_storage.xml - c sysman/admin/default_collection/my_storage.xml
  Oracle Enterprise Manager 10g Release 10.2.0.1.0
  Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
  Not analysis Instance file target (targets.xml)
  Validate the Collection target sysman/admin/default_collection/my_storage.xml file
  Validating target metadata file sysman/admin/metadata/my_storage.xml...
  Target the sysman/admin/metadata/my_storage.xml successfully validated metadata file
  
  The plug-in is imported into Oracle EM GM 10 5 correctly.
  
  When I try to deploy, I get an 'error '. I go to the screen deployment errors and warnings and that's:
  Deployment operation failed on the agent with an error state
  
  Where can I find some sort of journal or information more deeply in the error state?
  
  Paul

  The preferred credentials you set for the agent where you try deploy it, are the same identifying information for the user who owns this agent install? During the deployment, files that are placed on the agent receive the same permissions and owner as install other files on the agent.

• With a sampling of the data with DAQMX, error-200279 occurs when making 2d array dbl

  Hello

  I did a system of simple analog voltage with DAQMX data acquisition.

  It is made for reading of capacitance, where output capacitance value out of a circuit in the periodic voltage signal.

  What I want is to get data from four capacitors simultaneously through four channels, using samples n n (dbl 2d).

  The structure of my VI is almost similar with examples of continuous sampling of voltage in LabView, with the exception of a few other calculations in the loop.

  And for the synchronization of the trigger, I've corrected the edge of release with the external signal from the capacitance reading circuit.

  Version no. 1 has a channel for data input voltage. Version n ° 2 has four channels for the input data.

  While ver.1 can get accurate reading of four capacitors circuit data each (a single channel at a time),.

  ver.2 acquires four channels of data, with a single thin data channel, all the others were wrong.

  I saw a 200279 error occur in the DAQMX read part 2d dbl, so I tried increasing the buffers by changing the sampling frequency or the number of samples, but it wasn't everything.

  I rose for most of the forums with the 200279 error, but the solution would not work on mine.

  Anyone can find the problem? I will attach my screws it may include a bit of Korean language, but most of them are in English, shouldn't be too hard to recognize. Sorry for the inconvenience.

  Oh I forgot, my DAQ is NI USB-6259, and it works in Win XP sp3 and LabView 8.6.

  Thank you.

  Hello Azurenight,

  The 6259 is a DAQ card of the M Series Multiplexed, which means that it is not possible to sample each signal at the same instant, rather the channels are all sent through the ADC even and must be sampled in order. More information on this can be found here:

  LabVIEW Help: Multiplexing compared with simultaneous sampling

  http://zone.NI.com/reference/en-XX/help/370466W-01/mxcncpts/multisimulsamp/

  It may still be possible to get the data you need with the card you have - could you give more information about the maximum eligible period between samples on different channels?

  If you require * real * simultaneous sampling, you will probably need different hardware.

  Kind regards

• Importing video files WITHOUT audio track despite the source with audio

  Sigh. Back with another ridiculous question with Adobe CC do my job nearly impossible.

  Running Adobe first Pro CC 2015 9.2.0 (41) build on a brand new macbook pro 2015 provided by my work.

  When I start a new project, I will import my clips and if I add them to the timeline immediately they will import with their audio very well and everything will work. After about 10 minutes of work on the project, however, no matter what video file with an audio track that I drag in my calendar won't matter is no longer with an audio track, DESPITE the fact that the file was related, audio compatible and if I open the clip in the source cutting machine there will be sound. If I try to cut and import the clip of it the clip still will not have audio when importing to the timeline. It's infuriating! I recorded a gif of the question:

  

  Any ideas at all? My only option is to save the project, open a new one, clips import it immediately with audio, copy it to my Clipboard, reopen the real project and stick!

  Its all in the correction of the source.

  

• How to build the project with library error in adf adf

  Hello

  IM using jdev 11.1.2.3

  in my project I module 2 so we need to build the project with adf dependency libraries...

  Two copies of the way to build the project with trial and error in adf adf

  Timo

• Cannot install the update KB2686509 DLL error missing files

  Original title: kb2686509 download fails, DIFFICULTY HOW, please?

  Automatic updates KB2686509 download fails repeatedly.

  Caused by missing DLL files

  OS - XP

  Hello

  (1) did you do changes on the computer before the show?

  (2) what is the complete error message you get?

  (3) you are able to install other updates successfully?

  I suggest to refer to the article and perform the steps mentioned over there and check if it solves the problem.

  http://social.technet.Microsoft.com/wiki/contents/articles/10880.kb2686509-failure-due-to-missing-DLL-files.aspx

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/322756 -How to backup registry.

• Unable to connect to the sites - msjava.dll error

  I finally got a new PC with Windows XP (Windows 2000 before a). I installed contribute CS3 and it works fine when I connect to two of my sites that are internal to my organization (hosted by us). The other two sites are hosted by an ISP outside of our Organization, and I am unable to connect to those. Other users can connect to external sites with Contribute, so I know that's not a problem with the access provider. When I try to connect, I get the standard Windows error box which States "Contribute has encountered a problem and needs to close. We are sorry for the inconvenience. "and when I click to see what is in the error report, the ModName is msjava.dll. I did a search for msjava.dll on my system, and it does not exist in my windows folder.
  
  If anyone else has experienced this? Any advice on how to find/fix this problem?
  
  Thank you
  Kathy

  I solved this problem. I went on the site of Sun Java and downloaded the latest version. Once has been installed, Contribute worked very well.

• Prob with .dll error message

  At the start, download a message concerning the icorvg32.dll saying: the specified module could not be found. How can I stop this error message?

  "I use Windows Vista", but you have posted to a group of win7

  No trace of any file type in a google/bing search engine

  Run these two free tools

  http://www.Malwarebytes.org/products/malwarebytes_free/

  http://www.SUPERAntiSpyware.com/

  Then run msconfig from the start tab control inputs

• Can I use the packages with compilation errors

  Hello
  
  I try to use procedures in a package that includes compilation errors. I wonder whether the remaining procedures within this package is usable or not?
  
  Or is there a way to only compile the correct procedure within this package?
  
  Thank you very much
  
  Murat

  user13795669 wrote:
  Not even Possible, I use execute commands as below

  run immediately "@/ var/mcp/loadUtlPkg.sql';" or with another way?

  No, you can not use as you wrote.
  @ - is a special, synonymous with start , sign command SQL * more.
  You cannot use it with the PL/SQL constructor.

  The only way that you can use the body to package not valid with valid package spec - compile another package, dependent on the subject. Not running - compile.

• Insert the disk with games error

  Im having a problem with call of duty 4 and call of duty: modern warfare, they worked fine on windows xp but im runnig vista pro now and when I try to play solo it always says to insert the right disk and try again. There is only 1 disc for these games please help. I called activision and they said to update my firmware I belive it is up-to-date. If not I don't not how update * address email is removed from the privacy *.

  docdrabs,
  If this PC has been updated from XP to Vista, check if that you update all your hardware and software drivers.  The firmware of your CD player will be available by the manufacturer of the computer or the manufacturer of the real CD player.  I'd start by checking with the manufacturer of PC for updates for most of the material.  You can get your videocard directly updated from the chipset manufacturer (nVidia, ATI, Intel, etc...) Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Smartphones from blackBerry Bold 9900 stuck on the update with App error 602

  I tried to update my device software (Bold 9900).

  The 9900 is connected to my computer and through backup and installation, then stopped at the restart for a few hours. In 9900 message "App Error 602"

  What should I do next.

  Thank you

  Tom

  Something is wrong here if your all steps

  How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop Software fo...