DJ 3050 has j611 says connected but offline, can't print why

Similar Questions

• HP Deskjet 3050 has J611 series watch in trouble with wireless printing

  Hey there,

  I have just a series of combat a HP Deskjet 3050 printer a J611 and wireless printing to work perfectly. However, for the last week or so is no more.

  The printer is connected to the network, as the result of the wireless network test is proven and it is the same network that the laptop is connected to. I have already uninstalled and reinstalled the software. The wireless light is on and I can see the signal strength and the IP address. However, it still works.

  I also I sent an email to the printer to see if it worked. Initially, I received an automated email saying my printer is not connected to the internet and then printing will be delayed. I didn't touch the printer after that, but about 6 hours later it started to print.
  I also tried to connect the printer with a USB key and configure settings wireless via USB does not work either. The computer cannot find a printer connected to the network. There is no firewall blocking the application or the printer.

  My settings:

  Router broadband wireless ADSL2 + -.
  Huawei EchoLife HG521
  TalkTalk
  Laptop - Medion Akoya E7214
  32-bit operating system
  Windows 7 Home Premium

  Help with this would be much appreciated! Thank you!

  Larissa

  I doubt disturbed the other printer.  Kaspersky can be a problem, but we're going to explore other things first.

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• I have a new HP deskjet 3050 a - J611... How can I print jobs mostly in black only?

  Most of my printing is black and white only.  How can I ask black and white only, without losing any more my color cartridge content.

  Please read this post then provide some details.   What operating system? In most versions of Windows, you can set default values in the Printers folder.  Look for the setting of "Print in grayscale" and "use black ink only.

  Black ink is pigmented and is not compatible with most photo papers.  If you have selected the photographic support for a type of paper the black cartridge cannot be used.

• HP 3050 has failed to connect to the router Thomson SpeedTouch ST585

  Hello world.

  I bought a wireless printer in order to print from my laptop to every corner of my house.

  The installation procedure gently and the printer 'feel' my router, but all of a sudden he ejects a screenshot advising HP 3050 has cannot be connected possibly due to MAC filter enabled in the router.

  It is not so. My router, provided by my ISP, automatically recognize each wifi device (last week, I connected a smart TV without problem).

  The report of wifi 3050 a conferms that stage the MAC filter control has not been transmitted. There is no IP address associated with the printer.

  The ST585 menu is very poor and I can't find anything to activate/disconnect able to solve the issue.

  Please help me before I get this printer to the store (consider that I am not native English and not so good at on networks).

  Thanks in advance.

  Nost

  Hi Nost,

  I understand that you have a problem getting your printer on your wireless network. I will do my best to help you solve this problem. Could you please call your ISP to make sure that the firmware is updated, to ensure MAC filtering is off and if there is no reason why the printer is not connecting.

  I am also including this document to install the software of the printer for a wireless network connection.

  I hope this helps, let me know if you need more assistance.

  Thank you

• HP Deskjet 3050 has J611 printer without a driver.

  What happens to my driver for my printer HP 3050 has J611 it saids no driver?

  [Moved from comments]

  Hello

  Uninstall and reinstall your printer by using the drivers and information on the HP website.

  Equip your model number of the printer for this information and troubleshooting for her.

  http://WWW8.HP.com/us/en/support-drivers.html

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• DeskJet 3050 has J611 printing project

  So I have a 3050 a J611.  I want to adjust the print quality settings and it won't let me.  I'vegot best, Normal, project and custom, but only Normal and custom are selectable.  I want to be able to select one of them, why can't I?

  I was looking just at things once again, and it's sort of silly system.  Quality is selectable in the tray press selection section.  I think they have just forgot to remove the redundant part for quality selection.   v

• My laptop connects is more to the internet, either hard wired or wireless. When it is hard wired, the laptop displays connection but I can't access the internet, and I've done it before.

  My laptop connects is more to the internet, either hard wired or wireless.  When it is hard wired, the laptop displays connection but I can't access the internet, and I've done it before.  My other computer has service very well (or I wouldn't send this message) I checked everything, what to do?

  original title: internet connection.

  Hi vonhatten,

  1. Did you the latest changes on the computer?
  2. You receive an error message when you try to connect to the internet?
  3. You have security software installed on the computer?

  Refer to the article below and try the steps mentioned, check if it helps.

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

• I did an extra e-mail for my partner account. We read emails when I am connected, but she can't read them when it is recorded.

  I did an extra e-mail for my partner account. We read emails in our two accounts when I am connected, but she can't read his email, if it is logged in and of itself. How can we make accessible account directly for her?

  deleted

• My printer is connected to my WiFi router, but I can't print

  My printer is connected to my WiFi router, but I can't print.  When I ask to print something, it goes through the options but nothing prints or is pending.  Any ideas?  Low ink, would result even if I printed a test page and newwork connedtion.

  Hello

  1 are there any changes or updates made on the computer?

  2 Windows operating system is installed on the computer?

  3. do you get an error message? If Yes, what is the full and exact error message?

  4. What is the serial number and model of the printer?

  I also suggest send you the link and try to run repair and check.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

  I suggest to see the link and try to run the troubleshooter.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if it helps.

• WiFi is connected but I can't connect to the net, what to do?

  WiFi is connected but I can't connect to the net, what to do?

  Hi Torrespa,

  1. what happens when you try to connect to the internet?

  2. were you able to use the Wi - Fi connection earlier?

  3. what brand & model of network card?

  You can follow this link & check if the problem persists:

  How to fix wireless network connections in Windows XP Service Pack 2?

  
  Reference: Wired and wireless in Windows network connection problems

   To set up automatic wireless network configuration

  Hope the helps of information.

• My HP photosmate printer is connected to my network as it is my laptop but I can't print wireless

  My HP photosmate printer is connected to my network as it is my laptop but I can't print wireless, if the usb port is located.

  How to print wireless or do I just remove printer and reinstall? Thanks for the help in advance: o))

  You install the printer on your laptop using the printer cd or the direct download of the full features software HP site.

• I have a good wireless connection, but I can't get my printer to print anything

  I have a good wireless connection, but I can't get my printer to print anything, but that's a story.

  Can someone tell me what could be wrong?
   
  Original title: default printer:

  Hello

  1. What do you speak?

  2. do you get an error message?

  3 did you changes to the computer before the show?

  4. What is the brand and model of the printer? What is a wireless printer?

  5. have you tried to install the printer drivers?

   
   
  
  Perform the steps mentioned in the article:
   
   
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
   
  I suggest you provide more information about the issue so that we can better help you.
   
   
  See also:
   
   
  http://Windows.Microsoft.com/is-is/Windows7/install-a-printer

   

   

  http://Windows.Microsoft.com/is-is/Windows7/install-a-printer-on-a-home-network

   

   

   

   
  I hope this helps.

• Hi, I have a Canon iX6850 printer, but I can't print in color from photoshop. The prints are black and white? What should I do?

  Hi, I have a Canon iX6850 printer, but I can't print in color from photoshop. The prints are black and white? What should I do?

  Hi Vera,

  Thanks for the update.

  Make sure that the image is set to RGB in Photoshop.

  In addition, we suggest you follow the steps below:

  1. exit and then restart Photoshop

  2. go in the file menu > hover your mouse over Print > press and hold the space key

  3 try printing

  This would reset the printing preferences for Photoshop.

  Kind regards

  Claes

• I just paid for an updated version, but I can't print!

  I just paid for an updated version, but I can't print!

  http://www.Adobe.com/support/download-install/supportinfo/

• DeskJet 3050 has J611 all-in-one: Mac cannot connect to the printer using the wireless configuration

  My printer is connected to the same network as my Mac. When you complete the Setup wireless using a USB in system (HP Utility) preferences, a message says: "wireless network settings have been successfully downloaded to your device. However your Mac could not locate the device on the network. »

  I did everything I could: restart the printer. Unplug the printer and reconnected on the network and configuration of try again several times.

  Help?

  Hey @benjaminllim,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the connection of your Deskjet 3050 has e-all-in-one printer to your computer Mac OSX 10.11. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Turn the printer off:
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer.
  4. Disable any antivirus, firewall or security of your Mac software.
  5. Try to run the installer.

  Please let me know the results after following the above. If you are able to print to the printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.