Dlink DNS-323 storage device not recognized by network

Am a Toshiba Satellite C650 with windows 7 on a home network with a storage device Dell PC and DLink DNS-323 with router DLINK DIR - 815 Dualband operation. Installed the router a few weeks ago and no problems. Software Bitdefender also installed at that time as well, but had no problem. Now I can't get the files for the Dlink DNS-323 is displayed on my laptop in the network so that I can back up files on it. He occasionally appears him disappear. Network will recognize the PC and shows the DNS-323 it is does not display the icon that allows me to access the files. Any help will be appreciated.

Hello

I suggest that you try to look the link below and see if it helps.

 
 

Hope this information is useful.

Tags: Windows

Similar Questions

  • mass storage device not recognized

    my computer does not recognize a storage device. How can I solve the problem.

    I found the answer under "related topics - USB Mass Storage Device not recognized " and it solved the problem!

  • BlackBerry Smartphones Mass Storage device not recognized...

    I am running Windows XP (Media Center Edition) and at the time where I was using a 8320, I didn't have this problem... but now that I have a 8330, my computer does not recognize the MicroSD card, I got plugged into my phone. It's literally the same card that was in the 8320, and otherwise everything else works perfectly.

    It is listed as an unknown in my Device Manager device, specifically as a "RIM Composite Device".

    * I already uninstalled the drivers of BB on my computer and reinstalled them.

    * I already uninstalled DM and reinstalled - not that I thought he would do anything, but it was worth it.

    * I went to the Microsoft support site and tried to use the drivers they have there.

    * I tried to disable the driver in my device manager and tried to force XP to recognize the device. No dice.

    UH... that's all! Any suggestions?

    Just an update to this issue.
     
    It is not really a solution, but I am sick of XP Media Center Edition, so I did a complete reformat of my laptop and installed XP Pro (as the words of God!) Long story short, my computer is recognizing the card support very well now. I can only assume there was some parameter of the register or glitch in my MCE that prevented the drivers to work as they should.
     
    Anyway, solved! Thanks for the help!

  • Windows 7 cannot map the drive to the DNS 323 NAS device.

    OK, I'll just about my mind with this one. I have a DNS 323 NAS device connected directly to my laptop with the static IP and a crossover cable (removed from my network for troubleshooting of simplicity). I'm running Windows 7 Pro. I can access the web interface of the device, ping and Windows 7, he sees in screen sharing network (taked me on the web of the interface when I click it). I tried to map a drive using the drive mapping by using the server name and Ip and I get the same result. It just says that it cannot connect. I removed all fireewall and virus programs. I have reset the NAS to factory default and the latest firmware.  I tried the safe mode with network and nothing. However, I can run XP mode and that works very well for the drive mapping.

    When I plug this NAS using the method above to another box under XP pro, and an another runnning Windows 7 Pro, they can map drives without problem.  So I think I reduced it to something with my Windows 7. It worked when I first installed 7, but I havn't found this NAS in awhile, so not sure when it stopped.

    Can someone help, it drives me crazy!

    I can't take credit for this answer - I saw it in another forum: uninstall Windows Live Login Assistant... it worked for me! I was unable to map drives to Win7, so that I could do this well with XP.

    I have no idea why it works.

  • PRS-600 USB device not recognized

    I am unable to get ereader PRS-600 to be recognized by the computer (Win7).
    I tried to update the software (even if I think it's in)
    (date) but the window 'connect a PRS-600 to update' does not progress and the update button is dimmed.
    I deleted the "unknown device" in the drivers, but when I reconnect the USB cable and the ereader, I always get the display of device not recognized and the message "USB device not recognized".

    I seem to have solved the problem. I contacted Sony through esupport and a chat with a tech.

    Make sure that the battery has some charge inside. Completely charge if you can.
    Stop eReader (fully)
    Remove the SD card
    Press the button Reset (at the bottom of the ereader)
    Turn it on
    While the display shows "Open book", at the same time press the button to "turn the page" (back) and the Volume button until the "Reset All" + screen
    Enter 'Yes' to reset the ereader. You may need to configure the screen (X button with the tip to draw at various points)
    If you charge the battery, you may need to contact the support chat for sorting.

    Good luck!

  • His number disappointed + B500 USB device not recognized at startup

    Hello

    We have 2 B500

    whenever I'm starting, after loading windows they give me an error "USB device not recognized" I don't know what to do any help will be greatly appreciated as it is strange that both machines are giving the same error.

    also on one of the machines the sound does not work, I tried to get out of trouble, the diagnostic says the speakers are working properly, but not her out at all.

    I'm kind of disappointed by these questions, we always buy at Dell, but we thought we would give Lenovo a chance, the machines were barely a few months, when the problem started.

    advice please?

    That error usually comes up when a non bootable USB device is connected. Check the Bios and make sure that the CD drive and HARD drive are loading first. That should solve your problem. If this is not the case, make sure that you don't have any USB stick or disk external HARD connected until the PC load.

  • Satellite L30: Usb device not recognized

    I have a problem with my laptop L30.
    When I connect my phone or a flash drive or external hard drive, it is said: Usb device not recognized one of the usb devices malfunctioned.
    Tried to reinstall windows did not help...

    is there a solution?

    Hello

    Hmm. First of all, you should unplug all external USB devices.
    Then go to Device Manager and remove it all concentrators root USB and USB host controllers.
    Reboot the laptop.

    After this procedure, the operating system should recognize and should install new ports.
    Now you can connect to a plug - and play instruments. These devices should be recognized automatically. But some external USB devices need additional drivers.
    Usually these drivers are provided with the USB device.

    I would recommend this review if necessary!

  • USb device not recognized / Power surge on hub port

    I don't have the slightest idea what happened here, but when I plug my defy in a PC all I get is 'USB device not recognized '.

    and I can't connect to usingf a P.C.

    Ive tried to re-satring the phone and the PC, ive tried also in another PC and it did the same "USB device not recognized"

    Ive tried to download the drivers, restart Phone bot and Paolo and still "USB device" unrecognized on the two p.cs.

    Ive also tried the USB debugging on the phone mode, but after a short pause, "Unrecognized USB device"


  • USB device not recognized. unknown device

    USB device not recognized, peripheral unknown.  I can not connect any USB

    If no USB device does not is that you need to install drivers of motherboard (chipset) or your USB ports on the motherboard failed. Since you have told us nothing about your computer, it's as specific as I can get. See the links in general troubleshooting below and if they do not help, post back with the missing information by:

    Help us help you:

    http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
    http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

    Troubleshooting USB by Uwe Sieber -http://www.uwe-sieber.de/usbtrouble_e.html

    General USB troubleshooting in Windows XP -http://support.microsoft.com/?kbid=310575

    MS - MVP - Elephant Boy computers - don't panic!

  • USB device not recognized (Nothing plugged and the mouse does not)

    My mouse (microsoft) wireless worked well until what within hours.
    then I said to unrecognized USB device
    The port works, but for some reason any
    the mouse is not, went bought another mouse and still getting the same message.
    Plus I get the USB device not recognized pop up, same
    Tho, nothing is plugged into one of the USB ports.
    Any suggestions on how to solve this problem

    Computer brand and model?  Windows OS?

    Open the Device Manager

    Click on the + sign next to USB controllers

    Do you not see that unknown device listed?

    Right click on the playlists of USB root hub

    Select uninstall

    Close Device Manager

    Restart the computer to Windows reload the drivers

    USB is now recognized?

    If failed, shutdown computer.  Unplug it from the electrical outlet.  Leave unplugged for 1 to 2 minutes.  Plug the unit in and restart the computer.

    USB is now recognized?

    How to troubleshoot USB device problems that can occur after a laptop computer that is running Windows Vista recovery from sleep or standby extended

    http://support.Microsoft.com/kb/953367

    Windows Vista does not recognize a USB external optical disc drive when you reconnect the USB optical drive to the computer drive

    http://support.Microsoft.com/kb/944292

    Run the System File Checker

    Right-click on command prompt and select run as administrator

    Type sfc/scannow

    Press enter

    Note: there is a space between sfc and / scannow

    How to analyze the log generated by the SFC Scan file:
    http://support.Microsoft.com/kb/928228

  • USB Device not recognized Hp OfficeJet 6600

    Hello all - I use my desktop Hp 6600 (connected via usb) jet and my computer (dell E6430 latitude) says that it is a usb device not recognized.  I tried a lot of troubleshooting, including the removal of usb controllers and reinstall, but which doesn't seem to work.  I'd like to help as soon as POSSIBLE. Again, I must keep my printer cable, because the network, I refuse the acess printers or something like that.

    Thank you

    J

    Hello

    If I understand correctly your computer does not detect the printer. You can try the following steps and check the results.

    1) inspect the cable USB and connection:- icon on the USB () facing up when the cable is connected to the product correctly. Check the back of your product and the back of your computer to make sure that the USB cable connects correctly and safely.

    After that you make sure that the USB cable connects correctly and safely, consider the following guidelines to check other potential problems associated with USB:

    • Connect any other USB device. Connect any other USB device to the computer and check if it is detected.
    • USB ports on the keyboard. USB ports on the keyboard and on the front of some computers is maybe not powerful enough to support the product. If the USB cable connects to the USB port on the keyboard, try to connect to it in another USB port on the computer.
    • Length of the cable USB. HP recommends that the lower USB cables or equal to 5 m (16 ft 5 in) long. However, a USB cable which is 5 m (16 ft 5 in) in length must be of high quality. Otherwise, HP recommends using a USB cable that is less than 2 m (3 ft 3 in). Do not use connection cables to increase the length of the cable. Use a powered USB hub, if you need more length.
    • USB ports replacing. Connect the USB cable to a different port on the computer to make sure that the USB port on the computer is not the cause of the problem.
    • Defective USB cable. Replace the USB cable to ensure that the existing cable is not defective.
    • Conflicting USB ports. Disconnect all other USB, USB, USB cameras scanners printers and all other connected USB devices. Start the connection of these devices one at a time to determine if the devices to use too much power. Plan to buy and install a hub USB powered if necessary.

    (2) power Off and power of the device.

    (3) update the Windows Device Manager:

    (a) click Start (for Windows XP) or the Windows Logo (for Windows Vista and 7), and then click run. The run window opens.

    (b) in the Open text box, type devmgmt.msc and press ENTER. The Windows Device Manager opens.

    (c) lists to look for your HP printer in Bus USB controllers or other devices .

    (d) right click on the entry for device to device/unknown HP and then click on set to update driver. The material up to date hospitality Assistant opens.

    (e) select install the software automatically and click Next. Follow the on-screen instructions to complete the refresh Device Manager.

    (f) repeat these s for all entries of device with a yellow exclamation point.

    (4) delete the temporary files and folders.

    (5) disable some startup items: -.

    (a) click Start (for Windows XP) or the Windows Logo (for Windows Vista and 7), and then click run. The run window opens.

    (b) in the Open box, type msconfig, and click OK. The System Configuration Utility window opens.

    (a) click on the general tab, click Selective startup.

    (b) if there is a check next to load startup items, select the check box to remove it.

    (c) click on the Services tab and then click on the hide all Microsoft Services check box.

    (d) click Disable all.

    (e) click on apply and then click Close.

    (f) restart the computer.

    (6) make sure that the Plug-and-Play Service is activated: -.

    (a) click Start (for Windows XP) or the Windows Logo (for Windows Vista and 7), and then click run. The run window opens.

    (b) in the Open box, type services.msc, and then click OK. The Services window opens.

    (c) to seek the 'Plug-and-Play services' and check if the status is started.

    (d) if the status is not started, then right-click on it and select start.

    (e) once on the way out of the window.

    (7) uninstall and reinstall the printer software.

    (8) re-enable the startup programs: -.

    (a) click Startand then click run. The run window opens.

    (b) in the Open box, type msconfig, and click OK. The System Configuration utility window opens.

    (c) click the general tab, click Normal startup.

    (d) click the Services tab, and then select the hide all Microsoft Services check box.

    (e) click applyand then click close.

    (f) click on reboot to apply the changes to the next time the computer starts.

    (9) try to install the software on another computer.

    Although I am an employee of HP, I speak for myself and not for HP.

    -Say 'Thank you' by clicking on the star of congratulations in the post helped you.
    -Please indicate the position that solved your problem as "accepted Solution".

  • USB problem-"USB device not recognized".

    Original title: USB problem

    I have a problem when I connect my nokia mobile to my pc via USB cable there is a display of msg of error "USB device not recognized.how to solve this problem? I tried all reboot pc, reconnect the device, format XP and reinstall.last night I was using a mobile navigation correctly with the same device same system same cable.i have tried driver re install but not fixed yet.i have Windows XP 3 intel p4.please help.

    Hello

    1. Are you having the same problem if you connect a drive flash or any other device?
    2. Have you tried plugging in Nokia mobile on another computer?
    3. Have you tried plugging it into different USB ports?

    I suggest you send more information to help you better.

    You can also refer to:

    A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive.

    http://support.Microsoft.com/kb/925196

    USB port may stop working after you remove or insert a USB device.

    http://support.Microsoft.com/kb/817900

    .

  • How do I update driver for printer Epson Stylus C43 Color inkjet (USB device not recognized)

    I run Windows XP Home Edition and have a printer Epson Stylus C43UX Color.  Quite often, the printer connects, is recognized by my laptop and works very well, but sometimes, when I connect and turn on the printer, I get a ball on the toolbar "USB device not recognized" State the Device Manager shows the printer as an unknown device and in the State of the device properties is no indication 'no driver installed for this device.  I uninstalled drivers and enforcement "Looking for new hardware" menu Action of the Device Manager has received the balloon message "new hardware found: your hardware is installed and ready to use. Try to then print the results in a "Communication error" message and the printer fails to print.

    Hello


    You did changes to the computer before the show?

    Method 1:
    Try the steps in the link and check.
    Advanced troubleshooting tips for General USB for Windows XP problems
    http://support.Microsoft.com/kb/310575

    Method 2:
    You can update the drivers on the manufacturer's Web site and check.
    See the link to update the driver:
    How to manage devices in Windows XP
    http://support.Microsoft.com/kb/283658
    Manufacturer link:
    http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

    Method 3:
    Try the steps from the link and check if you are able to print.
    Printer in Windows problems
    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  • Device not recognized-to USB using Windows XP (sp3)

    The camera is on, I did not USB drive internal or external, the USB cable is a direct connection with the camera and the computer. I am running windows XP; I even tried on another laptop and at the end upward with the same message-USB device not recognized! This could be a software problem on the camera, or a bad set of USB cables? The camera is 2 years old and the cable have used about 6 times to transfer photos from the camera to the computer. When I tried on another laptop I got the following message: not properly installed device driver software! Is there a solution to this problem?

    Hi RigoSantiago,

    Follow these methods.

    Method 1: Install the drivers for the camera and associated software. Also, see the manual for more information.

    Method 2: Follow the steps in the article.

    Advanced troubleshooting tips for General USB for Windows XP problems

    http://support.Microsoft.com/kb/310575

    USB devices that are disconnected and then reconnected to a USB hub may not be detected on a Windows XP-based computer

    http://support.Microsoft.com/kb/920875

    For reference:

    A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

    http://support.Microsoft.com/kb/925196

    Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

    http://support.Microsoft.com/kb/314634

  • Device not recognized USB message with iPhone 3g

    Here's the story from the beginning, I hope that I have provide sufficient detail.

    I got my iPhone 3 G is replaced. Therefore, a new phone... I went on iTunes in the middle of the restoration... It gave an error message and put my phone in recovery mode. Since my computer gives me the message "USB DEVICE NOT RECOGNIZED" and appears as an "unknown device" in Bus USB controller in Device Manager.

    I went to apple and they finished the restoration... I plugged the phone on other computers... It is therefore not the phone.

    Still nothing pops up... It keeps giving me "USB DEVICE NOT RECOGNIZED" I have uninstalled iTunes the right way... as Apple people walking through and reinstalled... the Apple Mobile Device is started.

    I still get nothing... everything is... newly installed... Windows doesn't recognize just... that it doesn't show up as a camera... and it does not even charge my phone.

    I tried different ports... and I get the same message... my camera and my sisters iPod shuffle connect correctly.

    I really need help! I don't know what else to do... I need to work on this computer. It's a Toshiba Satellite Windows Xp SP3

    I just went through two weeks of tampering with my 'old' computer trying to recognize my new 4370dn Canon multifunction printer after installing Windows 7.  I tried to reinstall Windows XP, uninstall the USB ports and hubs in Device Manager, update the printer drivers and several combinations of these elements.  In my case the ports would recognize external hard drives and flash drives, but my printer would come as a device not recognized.  Finally, what worked for me was to uninstall all the ports/USB hubs listed in Device Manager (they get automatically reinstalled with a soft reboot of the computer) again, download a driver from the Intel website (http://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/16023/a08/infinst_autol.exe&agr=&ProductID=&DwnldId=16023&strOSs=&OSFullName=&lang=eng) chipset installation utility and restart the computer.  When I plugged the USB cable from the printer, the normal process of new device was launched.

Maybe you are looking for

  • Apple music deleted all my songs :(

    I have an iPhone 6 and just tried to listen to music on the Apple music application and realized that all of my music is gone! Completely DISAPPEARED! its just two playlist I had, but they are EMPTY. Please how do I restore my music. I stopped using

  • WMP 12 will not synchronize playlists to my Sony Walkman NWZ-S545. Earlier versions, well operated

    HI: Since the purchase of a new computer, win 8, none of my gadgets work well. My Walkman can not synchronize playlists from WMP12. Any suggestions?

  • Mounting clip auto adjustment position

    Hi guys,. I have a pretty simple question, and I'm sure it'll be a simple answer. I'm not sure what I've done, but so far I could cut a clip on the timeline and the clip after that it would automatically move at the end of the one I had just trimmed.

  • HP Envy 4500: print pdf with no. margin in adobe reader

    Hi, good evening: I use a Microsoft XP and HP Envy 4500 printer: I'm trying since this morning to print a PDF with no. margin in adobe reader. When I select 'Print' (inside Adobe Reader) in the printer option, I selected the printer HP Evny 4500, and

  • Recovery of VPCF13BFX

    I have Sony Vaio VPCF13BFX, by miistake I fomated the disk, how can it now, I have my recovery