DLL errors - help

Similar Questions

• Error Msg: d3d9.dll lack, not found the procedure entry point, not able to locate the ddetry10, not able to locate ddraw.dll. Help, please!

  has recently had to restore my old computer. When I try to play games on facebook its telling me to install adobe flash plyer x. but it will not be installed. Error Msg: d3d9.dll lack, not found the procedure entry point, not able to locate the ddetry10, not able to locate ddraw.dll. Help, please!

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-files/Dirext-x-file-d3d9dll-is-missing-Baz/2c639497-CFBA-4C6D-9155-f946f8dc1a45

  It will be useful.

• Help start the old computer system32/hal.dll error not installed bugs not working-

  I want to transfer files from your old computer to new computer with Vista Easy Transfer.  In an attempt to start former computer, received the system32\hal.dll error.  I followed the instructions to fix proglem reboot, press / hold down f8, etc., but that has not worked.  I could reinstall the operating system Microsoft Windows XP Professional, including Service Pack 1. But if I do then I lose all files, documents, photos, everything from the old computer... at least, I think it's going to happen.  Can you tell me what are my options to ensure that I don't lose any of my data.

  This behavior can occur if one or some of the following conditions are true:

  By default in the [Boot Loader] section of the Boot.ini file is missing or invalid.

  Windows XP is not installed in the location specified in the Boot.ini file.

  The Ntoskrnl.exe file is missing or damaged.

  The path of partition in the Boot.ini file is not set correctly.

  General failure.

  The article below should help you solve this problem.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  You must have a Windows XP installation disk to perform the steps listed in the article above.

  Hope this helps

  Post back if necessary

  ___________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Impossible to install FSX Deluxe, receive the error message "could not load the DLL: Gameuxinstall helper.

  Original title: installation of FSX

  When you try to install the FSX Deluxe I keep getting unable to load the DLL: Gameuxinstall helper

  Hello

  What is the version of the operating system installed on your computer (if it is x32bit or x64bit version)?

  I suggest you to contact Microsoft Flight Simulation support to improve the assistance on the issue:

  https://microsoftflight.com/en-us/contactus/

  You can also check out the link below:
  http://www.Microsoft.com/products/games/FSInsider/community/pages/default.aspx

  http://support.Microsoft.com/kb/910816

  http://social.technet.Microsoft.com/forums/en-us/w7itproappcompat/thread/641b3933-3C3a-4077-8a1e-e271b3c19a95

  If you use windows x64bit OS Microsoft Flight Simulator x Deluxe is not supported.

  Reference: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Search.aspx?l=en-us&type=Software&s=Flight%20simulator%20deluxe&os=64-bit

  Hope this information is useful.

• Satellite 5200 701 begins with SHLWAPI.dll error code

  My Satellite 5200 701 comes with SHLWAPI.dll error code, thn stops.

  Any help would be grateful!

  You can start your laptop in safe mode?

• Run DLL error Windows 8 on laptops HP 2000

  When starting the laptop of HP 2000 using Windows 8, I get DLL error run there was a problem starting c:\\users\judy\appdata\local\conduit\backgroundcontainer\backgroundcontainer.dll the specified module could not be found.  I installed Norton Security software. I don't know what is this error or how to fix it! Any help would be appreciated! Thank you!

  DLL errors appear when the DLL is damaged, and it gets damaged due to the registry database. When the registry keys concerned is corrupt then it affects the DLL file and so that the error message appears. So to fix this error, you must set the registry key corruption. Apply any registry repair tool and fix DLL errors directly.

• i5 dll error appears when I play sims 3

  i5 dll error appears while I am playing sims 3.  What this has to do with my driver?  because to think that I remove the covers and I don't know how to do this.  My operating system is Windows XP Home Edition and I have a Dell Inspiron b130 laptop.  Help, please!  I have a mobile chip intel 915 GML video graphic card/card of value.  It's a crazy old woman... from 2006

  Hi Organist4ever,

  Welcome to the Forum of answers Windows Vista.

  To delete the cache file, follow these steps:

  Cache files are temporary files that are saved by the game to make some faster loading information. If these files have incorrect data or damaged, it can prevent your game from loading. The game will regenerate fresh copies of these files whenever it loads, in order to remove them are perfectly safe, and it is normal for them reappear.

  1. to delete your cache files, open your MY documents Arts\The Sims 3\. Inside there will be a number of cache files:

  CasPartCache.package

  compositorCache.package

  scriptCache.package

  simCompositorCache.package

  Delete all those files you have.

  2. also look in the folder MY documents Arts\The Sims 3\WorldCaches\ (if you have one) and delete all the files inside this folder. Don't worry if you don't have a record of WorldCaches , or if it is empty - some people have WorldCaches and not others.

  Please let us know if it helps.

  Thank you and best regards,
  David

• Windows root > \system32\hal.dll error on a laptop without cd player or cd when bought

  Hello

  Got a problem. My daughter has a laptop HP with Windows xp. She did a disk defragmentation and clean last night... today, when she turned her on she received a Windows root>\system32\hal.dll error message. We do not have a CD to restart from... and it has a CD drive in the laptop. I can't find how to get to the system restore point... Ive tried f10, f12, f9... r. I also went into the BIOS and there is only one option it to boot from... any ideas? any help would be great.  17 am very angry. Thank you!

  Hello

  Got a problem. My daughter has a laptop HP with Windows xp. She did a disk defragmentation and clean last night... today, when she turned her on she received a Windows root>\system32\hal.dll error message. We do not have a CD to restart from... and it has a CD drive in the laptop. I can't find how to get to the system restore point... Ive tried f10, f12, f9... r. I also went into the BIOS and there is only one option it to boot from... any ideas? any help would be great.  17 am very angry. Thank you!

  Fortunately, not all is lost here for you. You have several options. You will need to create a CD of the utility. (1), you can boot from a usb flash drive and run utility Cd or 2) you can buy a removable usb device cd rom and there. It's the best option, but instructions differ radically, so I need to know which is your choice of boot options to help you. You won't have a windows disk to perform the procedure.

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• Get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error at boot fruity loops.

  Original title: ntdll.dll error at boot fruity loops.

  get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error when I try to start fruity loops after installing Kies from samsung for the new phone. How can I fix this error? Help, please. Thanks in advance! :)

  Hello
  I suggest you contact support FL. I couldn't find all of the resources for this program.
  Eddie B.

• I notice on my screen when Windows XP starts, it reads: load the dll error, below him, he reads: Can t Load Res-dll, less than OK

  When I start Windows XP, I get a notice in a small box centered on the screen that reads: dll error under thatCan dll-Res t of load lower than loading OK in a smaller box. I click and it comes back several times, for example, when I go on line and lok e-mail, etc.then, it disappears. Thanks for your help, as you can see in my writing I'm not veru computer savy.  Mike Sabol

  When I start Windows XP, I get a notice in a small box centered on the screen that reads: dll error under thatCan dll-Res t of load lower than loading OK in a smaller box. I click and it comes back several times, for example, when I go on line and lok e-mail, etc.then, it disappears. Thanks for your help, as you can see in my writing I'm not veru computer savy.  Mike Sabol

  Hi Mike... When the pop-up window appears at the top of the pop-up window, it should tell you the name of the software that is associated with the dll missing/corrupted. Please look and see if it is listed, and then tell us what software. Make sure that you list the full error message.

  In addition, do you use a Linksys router to connect to the internet? You should also do a scan with Malwarebytesmalware. It doesn't matter what other scanners you used. Scan with Malwarebytes. Thank you.

• My program of software called photoimpact that XL does not open. I have a ge ulibpng.dll error.

  Original title: error ulibpng.dll

  My program of software called photoimpact that XL does not open.  I have a ge ulibpng.dll error.  I already reinstalled the program, but always error.

  Will be it someone please help me solve this problem.

  Thank you

  Try reinstalling the program.

  If this does not work, you can try a system restore to the it worked: http://support.microsoft.com/kb/306084

• Could not load dll target ("C:\program files\backweb\backweb client\6.1.0.153\program\backweb.dll error code126)

  Original title: error code 126

  Could not load dll target ("C:\program files\backweb\backweb client\6.1.0.153\program\backweb.dll error code126)

  How can I fix it?

  Hello

  1. when exactly you get this error message?
  2. don't you make changes on the computer before this problem?

  Please answer these questions and tell us more about the issue. This could help us help you better.

  Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

• Get execution of dll errors in XP

  I am running windows xp professional and I occasionally GRT run dll errors. I sent several reports of errors, but I haven't gotten help yet. To help you?

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2 when was the last time it was working fine?

  3. When you get this error message when launching applications or comes back randomly?

  I suggest that scan you SFC [SFC system] on the computer that would scan for corruption

  file system on the computer and replace them.

  a. click Start, click run, type cmd in the Open box, and then click OK.

  b. at the command prompt, type sfc/scannow, and then press ENTER.

  Note: Could you prompt to insert the Windows XP CD.

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information, you can consult the following article:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Hope this information is useful.

• Windows msv3260 dll error

  Whenever I start my computer, it gives me an error of loading c:\WINDOWS\msv3260.dll error message.  You can give me any help will be greatly appreciated.

  Hello

  1. have you made changes on the computer recently?

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

• Blue C:\WINDOWS\wmcicif.dll error (Windows XP) specific module could not be found

  Blue C:\WINDOWS\wmcicif.dll error (Windows XP) specific module could not be found

  My printer kept jamming so I went to reboot my computer and this is the message that appeared and continue to appear each time that I reboot or turn my computer now.

  I deleted and re-installed my printer in the hope that it could solve my problem, however, it did not work.

  It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you solve the problem and not only correct the symptoms of the problem in just the startup message.  Deactivation of the item in msconfig 'fixed' nothing but the annoying startup message.
  I would recommend also you start to search in the register, unless you have a backup because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom, but may not actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
  !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove
  .  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!