DLL file.

Similar Questions

• missing yvfpemrj.dll file how to solve this problem?

  After reinstalling Firefox on Windows 7 Pro, I get the message that the... yvfpemrj.dll file is missing when I start the computer. Also, when I use google to search, it displays a blank page.

  It seems that your computer might be infected by a Virus (http://www.bleepingcomputer.com/forums/topic446165.html )

  I suggest the following resources:

  My Firefox problem a result of Malware is an article from the Mozilla Support with some good advice to avoid and fight against malware.

  To verify that your system is clean, perform the following steps (no official Mozilla tips, just good practices of personal experience)

  Download and install MalwareBytes Anti-Malware, run a full scan. http://www.Malwarebytes.org/

  Download and launch TDSSKiller http://support.kaspersky.com/faq/?qid=208283363

  Download and install Microsoft Security Essentials http://windows.microsoft.com/en-US/windows/products/security-essentials (no not official approval, but I personally recommend MSE as a great permanent anti-virus)

  Check all Windows updates.

  If you still have problems with Malware after that, I would recommend either http://www.bleepingcomputer.com/virus-removal/, or have your computer cleaned by a professional.

• Satellite Pro A300 - System32\hal.dll file is corrupted or missing

  I have a Toshiba Satellite Pro A300, which says that the System32\hal.dll file is missing or corrupt.

  Is it possible to repair the file by a recovery by the laptop itself, or do I have to get a copy of Windows Vista to start over and do it this way?

  Hoping to get some possible answers to what to do.

  Thanks Christian

  Hello

  I read that some discussions in different forums and in most cases the new OS installation may solve this problem. The HAL.dll in place in C:\Windows\system32 then maybe you could solve this problem in copy this file from the Vista CD in this folder

  You could start the unit by using a Live CD (linux or windows lice CD called PartBe or WinPE)
  But the easiest solution would be to the recovery procedure

• Satellite A60-723, cannot load DLL files at startup

  Hi, I bought an A60-723 for my education and one day I turned on my pc and it crashed, so I rebooted.

  When I rebooted there are scratches on the screen from the top down. Until the loading screen windows might appear, I had an error that a certain .sys is missing or damaged. I used the recovery cd, but it did not help .sys sometimes a another file was missing (examples: ntfs.sys, setupdd.sys)

  So I decited to format the entire disk. After that the bands would not disappear. And there was no error no that was asked to a bootable cd. So I inserted the windows xp pro cd and tried to install windows.

  While Setup was loading it crashed ad loading of DLL files, and an error has been reported error code 7, as well as another 4 error

  Here is a picture of the scratches that I was talking
  http://home.wanadoo.nl/vanhambol/PIC.jpg

  Just found out that if I push next to the touchpad then scratches disappear and I hold up my fingers they come back again: S

  Anyone know what I need to do?

  Hello

  About scratches, put service! There is something of physically wrong with your machine.

  Regarding the startup problem, (do this test before putting service to the band-problem!) first try to use the recovery CD. Retrieve the device and see what happens. Do you find these missing errors file? If this isn't the case, at the same time, cause a little. Try to see if there is a "connection" between the bands and the missing files.
  Get missing files-errors only when you see the scratches? Maybe these 2 problems are really from the same source.
  In this case they should both set if you turn service.

  Hope this helps you.

  BR

  Tom

• Satellite Pro L300 - missing dll. files after the installation of the printer

  Hello

  I have missing dll. files on my Pro L300.
  When I try to install my printer software it throws an error message upward.
  I now have the missing dll. files, but can't seem to install them. Someone knows what to do with them?

  I am running XP and the files are sccbase.dll slbcsp.dll

  I have listed this question before, but it has never been on the forum?

  Thank you very much

  Q

  Hello

  I searched and slbcsp.dll sccbase.dll and found someone who had the same problem after installation of the printer software.
  Check out this site:
  http://forums.CNET.com/5208-6142_102-0.html?ThreadId=275051

  Please post some feedback after you try the workaround solution posted here.
  It looks like a registry key must be changed.

  Good luck

• SA10-A103: "tpwrreg.dll" file is missing

  tpwrreg.dll file is missing when I install powersaver. No matter if I install disk powersaver or if I download the latest driver. He said the same thing when I try to install "common Modules".

  I think I have a Satellite A103. It says SA10-A103.

  Thank you very much!

  Hello

  I don t have found all the details on this file, but I guess that you install the operating system on your device manually. Without using the Toshiba Recovery CD.
  Well, it is very important that you install Toshiba stuff in the right order.
  1.) chipset utility
  Common modules 2.)
  3. display driver)
  4.) etc.

  Please also see the SP2 update news you will find on the page of the Toshiba driver.

• Receive data at teststand dll file

  Hello

  I have the function below in my dll file but I have a problem receiving parameters to teststand.

  int GetEvent (pid int, char * msg, int & msgSize)

  PID is the input parameter

  * msg will be the received string

  & msgSize will be the length of the received in full force.

  Any idea on how to address this problem?

  Concerning

  Ray

  Hello Ray,

  Are you accommodation TestStand using the type definition to set the function parameters in your call TestStand DLL? If so, TestStand generally expected of the input strings to be of type ' char *' and the output of the channels to be of type "char [x]", where x is a default size. It can also be simply 'char []').

  Alternatively, you can substitute TestStand think is the prototype of msg and change string TestStand type C (const) to the C string buffer in setting property settings. You must also give the buffer of a default size that is larger than you would expect to receive in the field of memory size buffer.

  Note that refreshing the prototype resets this substitution, so change the type library in the source would be preferable.

  I hope this helps.

  -Jack

• retrieve the missing dll files in Vista

  After starting, I get the messsage App Data\Roaming\new not found next.me\nengine.dll. As a result, the system blocks whenever it accesses a new screen after an early upward. How to restore this software? I have a recovery disc I made when I bought the PC in 2007, but no instructions on how to use it.

  I now run malwarebytes and hitman. The results were not going as I was expecting from your instructions, but maybe it's because I tried malware a month ago but was reluctant to use without a recommendation. As a result, that my trial period has expired but he stll allowed me to do a full scan.

  Malwarebytes reported 524 detected objects, but did not provide that they be withdrawn instead, it offered hibernation (maybe not the correct term) I chose to accept.

  Hitman has identified 1 threat and 1 highjacker. and 67 pieces of malicious software. It also identified that a file does not exist - AppData\Roaming\Dropbox\-exe. It looked a lot like the file which has been identified as being absent whenever I logged on. He offered a repair option. I took the option to repair the file and remove malware.

  I rebooted (twice) and the message that the dll file is not found no longer appears.

  On this basis, I am happy to record a success and thank you for your help, expertise and patience.

  It leaves me with a problem of what to do about the future with regard to protection against malware. It seems to me that my current anti-virus software is not fit for purpose. I am drawn to using malwarebytes and hitman, but I intend to completely change my COMPUTER (hardware and operating system) resources when my course ends in September, I won't take any short term decisions of others to pay attention to everything I do and what I have access.

  So thanks a lot for your help.

• call a .obj from a dll file

  Greetings!

  I have a question calling a function in a .obj file (running specifically) in a .dll file.

  At present, it will load the obj file and get a valid (non-NULL) pointer to the function, but then I get a general protection fault when I try to call the function.  If I mouse over the function pointer, the address is valid (although not NULL anyway) but the name of claims "unknown function.

  I guess I'm not to expose the functions available in the obj file correctly, but the United States of __stdcall seems to make no difference.

  It is new territory for me, so do not assume that this isn't something obvious that I'm just missing!

  Any help is the aprpeciated

  First of all, your code looks correct. This leads me to think that it is perhaps a question Data Execution Prevention (DEP). The mechanism of LoadExternalModule/GetExternalModuleAddr was developed long before DEP has been poured, and it happens in time (for LoadLibrary/GetProcAddress). If you go into system settings Advanced window, it has a button for the Performance parameters. Click on that and it will bring up some tabs, which is Data Execution Prevention. Set it to "Turn on DEP for programs Windows and services only," restart the computer, then try your program.

  I realize that even if this solves your problem, it may not be not possible to ensure that the DEP is disabled on your program must be running on all machines. Since you're at the point where you have to choose the way of the future, I highly recommend that you try to replace the static lib with a DLL. Certainly, a DLL must be related, and it cannot directly access the functions and variables in the program; This can make it difficult to adapt the code of the existing static lib. However, if it really is a separate logical element, it should be possible.

  A. Mert

  National Instruments

• Why can't I open some .dll files?

  I have an old computer a file called atmcd32d.dll that says typotheque labview vi. When I open it it shows me a library of functions of vi that I need to operate an instrument. I downloaded the drivers updated from the site of the instrument and the new file is still atmcd32d.dll, but now the guy says DLL File and does not open. When I double click nothing happens. When I transfer the file from your old computer to the new it still opens.

  Do I have to extract the .dll files or what?

  TSCline-

  DLL is linked dynamically, libraries.  They are a binary format that can be run only on machines from the base of the window (and not on Macs).  It should not be possible to open a dll (if you opened it in Notepad you should see nonsense).  To use the dll, they must first be compiled and linked to your OS.  Then, you must know the hooks into the dll.  In Labview, you interact with through the node to call a library function of dll, and it must know how the function is called, you can correctly specify the parameters of entry and exit (a header file will tell you which functions are available in the dll and how to interact with them).  I think you can find more info on ATMCD32D. H here.

  I hope this helps.  Cheers, Matt

• can I create a DLL file for labview that has DLL library with inside?

  Hello everyone,

  I am developing an application for the cards PCI devicenet in labview (beginner to labview) environment.  Is there a DLL file for the PCI card from the provider. But it's too complicated for a beginner to call each function in the DLL of labview. Therefore, I'm trying to re - use a VC ++ program (working properly) that calls some sellers DLL library functions.    To do this, I created the DLL file which includes all headers and libraries the provider DLL, as indicated in the attached figure. But I couln can't see the effect on the device. is it possible to create a DLL file for labview that has DLL library with inside? If this is not the case, how can I implement the program shown in figure?

  I would like to wish a huge as to advance.

  It is not something I have a lot of experience in so I don't know all the details of the restrictions or requirements etc - but it is certainly possible to create wrappers for the dll and then use them in LabVIEW - this is sometimes necessary to convert some native types/data structures in C/C++ into something that you can switch to your other DLL LabVIEW.

  There is a link here: http://digital.ni.com/public.nsf/allkb/06ECDC689DDA0F3D862574440074CD95

• presentation of the webcam.dll file

  Hi there everyone, I'm trying to learn how to use the library of appeal in Labview and it would be my first time doing so.

  I'm looking for an example online for usb and webcam.

  I found this example with

  WEBCAMGRAB. DLL

  I looked in the blocked diagram and I see 3 entries.

  the reason why I know because the schema-block said.

  lets say that I have not blocked diagram and only the WEBCAMGRAB. DLL file. How will I know how to use the file in the node of the LIBRARY of CALL?

  How can I tell that an int32 is driver, the width and height?

  

  The .h file is useful because it allows you to run the shared library import wizard. It will (try to) create individual screws for each function in the DLL. The wizard requires the DLL itself and the header file. If you do not have the .h file, then you must associate the node library function function call.

  With the help of a hardware control DLL is no different than using a DLL to something else. Everything is a matter of understanding what are the functions of call and in what order. Common problems are by allocating memory for strings or arrays. Usually DLL functions assume that the caller has allocated memory for these.

  What is the VI you have downloaded supposed to demonstrate?  He calls a lot of subVIs, none is included. You call the DLL in the subVIs?

• Insert the .dll file Ocean Optics Jaz

  Hello

  I want to use the package of spam (Ocean Optics) in Labview 2009. But I have no idea how use the .dll file in Labview. I already found tools > import > shared library.

  Insert the SPAM32. DLL file. But in the same menu, you must also insert a header file. But where can I found it? Or I do something wrong?

  Could someone help me with this?

  Stephan

  Finally I found the answer

• HP psc 1350 All In One Printer - missing .dll file

  Not sure if what follows is a component of "Windows XP" or "HP printer / Scanner"?

  When the desktop screen comes on, the message reads: "hphmon 06.the exe - Unable to locate component. This Application has failed to start because hpzjrd 01.Intro dll not found.  Re-installing this application may fix the problem. " Question : How can I re - install this"application"- without making a full recovery from ?  

  Hi circle-3,.

  Welcome to the HP Forums.

  When it comes to a lack. Dll file, I suggest that we start by running the HP print and Scan Doctor.  If the doctor does not resolve the problem, you may need to consider doing a system restore.

  Thanks for your time.

• X3DAudio1_7.dll, what is this .dll file and why keep is asked to install it in order to get my games to work?

  original title: X3DAudio1_7.dll
  What is this .dll file and why keep is asked to install it in order to get my games to work?

  This file is a newer DirectX file (Feb 2010) not listed is not in the out-of-the-box DirectX, which is part of Windows 7 (July 2009). You must download and install the latest updates of DirectX http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2da43d38-db71-4c1b-bc6a-9b6652cd92a3&displaylang=en. Do not be annoyed by the description"provides updates to 9.0 c and previous versions of DirectX", the package updates ALL your versions of DirectX installed (usually 9, 10 and 11).  "192GO should be enough for everyone." (of the miniseries "Next generation jokes")

• Windows 7 d3dx10_.dll file is missing

  Original title: WINDOWS 7. DLL FILE MISSING

  I have a problem when I run this game that an error pops up saying that my d3dx10_.dll file is missing what to do

  can any body help me

  Hey Kevindran,

  What game are you talking about?

  D3dx10.dll problems result in one way or another by a problem with Microsoft DirectX. The file d3dx10.dll is one of many files in the DirectX software collection. Because DirectX is used by most Windows-based games and graphics programs advancements, d3dx10.dll errors usually only appear when you use these programs.

  Here's what you can do to fix the error.

  1. find a DirectX installer on your game folder or installation CD or DVD. Usually, if a game uses DirectX, software developers includes a copy of DirectX on the installation disc.

  2. Uninstall the game and then reinstall it again. Something could have happened to the files in the program work with d3dx10.dll and a reinstall might do the trick.

  To get help, view the required information.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.