DLL for teststand

Similar Questions

• Need to frontend.dll for 64 bit TestStand 2014

  Hi all

  I get an error during indexing, I think I changed something in the directory then it asks x64\frontend.dll file that I could not find anywhere.

  I found frontend.dll for 32 bit, but not for 64 bit.

  I also tried to uninstall teststand 2014 and install it again. Same problem, I directed to

  Need Suggestions

  Thank you

  You might have a custom version of FrontEndCallbacks.seq in your public directory? If so, it is perhaps where it isn't finding the 64-bit version. You should be able to copy from the installation location to C:\Program NIUninstaller Instruments\TestStand 2014\Components\Callbacks\FrontEnd as far as your custom version is in your public directory. Or remove your custom so FrontEndCallbacks.seq you do not use it.

  Hope this helps,

  -Doug

• Use of the standards of construction for TestStand deployment target

  Hello world

  I currently use an Internet Toolkit OR in one of my VI to build a module of code for TestStand.

  The question is which target the deployment of doesn't have the NI Internet Toolkit.

  So I would like to build the way to the deployment target VI would not need the Toolbox for the use of the VI.

  Did someone knows a way for that?

  Thank you all...

  With the application builder, create a dll. Your other options is to buy the box for each deployment tools or do not use the Toolbox.

• How to get the result of the test of CVI DLLs in teststand!

  I write a driver dll to test a source, I want to get the tension of world SERVERS (the instrument of the RS) and I used to call DLLs that written by CVI, teststand

  My question is what is the best way I can get the result of the test and show the user to teststand. the code below is fair? When I used to call this dll document, teststand

  "" I just get the result by setting in TS.this is a good meathod, and what should you do in teststand, I put the "outputVoltageV" point to an object?

  /*===========================================================================*/
  / * Function: read voltage/current output * /.
  / * End: this function returns the output and actual output voltage * /.
  / * current instrument.                                      */
  /*===========================================================================*/
  ViStatus _VI_FUNC rsngsm_datReadOutput (ViSession instrSession,
  ViPReal64 outputVoltageV, ViPReal64 outputCurrentA, ViPBoolean statusPeakCurrent)
  {
  ViStatus rsngsm_status = VI_SUCCESS;
  Bruno buf [BUFFER_SIZE];
  ViInt32 retCnt;
     
  FMT (buf, "%s<>
  If ((rsngsm_status = viWrite (instrSession, buf, NumFmtdBytes (), & retCnt))<>
  Return rsngsm_status;
         
  If ((rsngsm_status = viRead (instrSession, buf, 50, & retCnt))<>
  Return rsngsm_status;
  If (Scan (buf, "%s > %f [p2];")) %f [p2]; %i [b2] ", outputVoltageV, outputCurrentA, statusPeakCurrent). = 3)
  Return rsngsm_status;
         
  Return rsngsm_status;
  }

  sean_tan,

  Yes, you just pass a value of digital TestStand (e.g.; locals.number).

  If you use the adapter of the ICB, it might make more sense that you can use the Flexible DLL adapter for this type of function, that you do not use the standard settings of tTestData and tTestError. While TestStand will correctly recognize the function prototype, you want to make sure you that include the type library of your function Panel (you will need to create one if you have not already done so) in settings target of LabWindows / CVI-> type library.

  I hope this helps.

  -Jack

• Equium A60 won't start - error message: Load needed DLLs for kernel

  The problem is the following; in an attempt to start, I get an error message: "Load needed DLLs for kernel.
  Re-install? I made this countless times.

  Following forums, I discovered that this could be a memory problem. However, my laptop has a built-in RAM and I can't change it. I changed that in the expansion without result slot.

  Any suggestions on how to deal with this problem will be greatly appreciated.
  Blessings on you.

  Hello

  Richard's right. Also check it please this document http://support.microsoft.com/kb/812450/en-us maybe it helps!

• Need DLL for Windows 7 64 bit

  Hello

  I use the USB-6501 to control an attenuator.  I wrote the driver to work with Windows XP, but now that I'm trying to use it on Win 7 64 bit, it causes an error.  At first, it complained about not having studio C++ 2008 (we had 2010), and we have fixed.  Now, it seems to complain about the DLL.  I talked about the NC, and they think that we need a different DLL for Win 7 64 bit.  Can someone tell me where I can get the DLL?  He settled in the System32 directory if I install the latest driver for Win 7?  Any help would be greatly appreciated...

  Thank you

  Steve

  I found the new version (nicaiu.dll) DLL in the System32 directory, when I installed the updated for Win 7 64 bit driver and copied to my local directory.  I also copied the new nidaqmx.h file on to my local directory.  I always get the following from MatLab error message:

  Loading nicaiu.dll...

  ??? Error using the ==> loadlibrary to 365

  Failure of pre-wet the input file.

  Output of the preprocessor is: 'cl' is not recognized as an internal or external, order

  operable program or batch file.

  Error in ==> USB_6501_driver at 38

  funclist = loadlibrary('nicaiu.dll','nidaqmx.h','alias','myni');

  Any help would be greatly appreciated.

  Thank you

  Steve

• load needed DLLs for kernel

  Have an Acer Aspire one and I have this message: Windows did not start because of an error in the software. Please report this problems: load needed DLLs for kernel. Please contact your support person to report this problem. NetBook came with XP disc. What can I do? and is it possible to retrieve documents and other things?

  Check this box

  http://support.Microsoft.com/kb/326671

• load needed DLLs for kernel windows xp home edition

  I tried to put in the disk of OS widow emachines xp home editon, restarted my computer and did a system recovery, chose to do a full system restore (destructive) I just wanted to clear everything and restore the original settings, and now it says windows cannot load beace of an error in the software: load needed DLLs for kernel and I have no idea what to do any help?

  Hello

  Do you have the XP installation CD?
   
  See links
  Error message: Windows did not start because of an error in...
  http://support.Microsoft.com/kb/326671
  Error Messages When you start your computer if Program Files of Windows are missing or corrupted
  http://support.Microsoft.com/kb/812450
   
  If you have the CD of the CD for scratches check, clean the CD-ROM with a soft cloth and try to install the operating system.
   
  If you do not have the CD you can organize a CD borrowed from a friend or a parent and try to install. You can also contact the manufacturer of your computer.
   

• my laptop does not start and gives me the error, load the required DLLs for kernal

  When I went to start my computer would not start and just says load needed DLLs for kernal and communicate with my support. I don't know what the problem is or how to fix it. It was working fine when I finally stopped him. any help is greatly appreciated

  Hello

  Method 1: Please follow the steps mentioned in the article mentioned below:
  Error Messages When you start your computer if Program Files of Windows are missing or damaged:
  http://support.Microsoft.com/kb/812450

  Method 2: How to perform an upgrade on the spot (reinstallation) of Windows XP:
  http://support.Microsoft.com/kb/978788
  Note: This could result in a loss of data on your computer; It is recommended that you back up all important data on the computer before performing this operation.

• the load needed DLLs for kernel contact the support what should I do? IAM support person lol

  trying to load xp pro and have not completed little matter what I do, it goes to this message of load needed DLLs for kernel

  Hello
  I suggest you to visit these links and check if it helps:

  http://support.Microsoft.com/kb/812450

  http://support.Microsoft.com/kb/326671

  Check if that helps.

• Error: "Windows did not start because of an error in the software: load needed DLLS for kernel.

  Original title: I HAVE a BLACK SCREEN.  Shows an error message "Windows did not start because of an error in the soft ware: load needed DLLs for kernel."

  I can't boot from the hard drive or Operating System CD.  Any ideas on how to start the system to fix the error?

  Hi FilippoPosato,
   
  This problem may occur if the Hal.dll and Ntoskrnl.exe files are mismatched.
   
  To resolve this problem, start your computer from the Windows CD, and then upgrade Windows on-site.
   
  For more information, see:
  Error message: Windows did not start because of an error in...
   
  More information on:
  Error Messages When you start your computer if Program Files of Windows are missing or corrupted

• Windows XP, computer crash, said to contact technical support, "load needed DLLs for kernel."

  What should I do now that my computer does not start? I tried F8, F10 and reboot... message came on the black screen "please contact the technical support and say" load needed DLLs for kernel. " "I do not have the Windows XP OEM or recover the disk.".

  You will probably need ot to obtain from the manufacturer of the computer for the installation diskettes (which would be less expensive to get a new XP license) and the repair of the operating system or do a new install. Keep in mind that this could have been caused by your failure to drive hard and not because of software corruption.

• is there an AVRT. DLL for Windows XP?

  Y at - it AVRT. DLL for Windows XP? If Yes, where can I get it?

  Thank you

  Henry

  http://www.ProcessLibrary.com/directory/files/avrt/312513/

• Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

  Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

  Hello

  ·          What is the number and the model of the computer?

  ·          What is the service pack installed?

  ·          The meadow of operating system has been installed on the computer?

  ·          Do you remember any changes made on the computer before the show?

  Try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx

  You can also check: Error Message: Windows could not start because of the mistake in... : http://support.microsoft.com/kb/326671

• help with this error message (load needed DLLs for kernel)

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error message load needed DLLs for kernel in Windows XP
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  ·         When you get this error message?

  Refer to the following articles:

  Error: load needed DLLs for kernel. : http://support.microsoft.com/kb/326671

  http://support.Microsoft.com/kb/812450

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.