Dllhost.exe and problem Windows 7 Thumbnail Preview

Similar Questions

• I get messages that support and problems Windows has stopped working. and also that I have no more memory on line 2. What can I do to fix this?

  I get messages that support and problems Windows has stopped working.  I told myself that I will advise if a solution is found, I get another box saying that I have to close becausse that Windows does not work.  I also get messages that I have not more memory on line 2.  What can I do to fix this?

  Hello

  1. could you give us the exact error message?
  2. Once you get this error message? This is when using Internet Explorer?

  In the meantime, check out the articles below and check. Try to increase the size of pagefile.sys and check.
  http://support.Microsoft.com/kb/2267427

  I hope this helps.

• COM Surrogate (dllhost.exe) and question of loading folder

  Hi all

  There are 2 problems that I think are related, but I could be wrong:

  1. Some files are loading very slowly (or even does not at all). The framework itself is displayed instantly, but the content is not and the Green loading bar in the address bar is.
  2. Surrogate COM (dllhost.exe) is always eat up to 13% of the CPU (so I guess that 100% of a wire with a processor of threads 4 cores x 2 I).

  Running on Windows 7 x 64, all updates installed.

  I saw a bunch of related issues here but with apparently different sources. I tried already to:

  • Run the System File Checker: no problem.
  • Run Microsoft Safety scanner: no problem.
  • Check the system drive to find errors: no problems.
  • Run Microsoft Fixit performance: some software/services launches at startup, but don't see any suspicious things.

  Any suggestions?

  Thank you very much!

  Niranjan salvation!

  And thank you for your fast answer :)

  First of all, my problem is (partly) solved! But not exactly by doing what you suggested.

  Pretty good for me and for the moment in any case. :)

  Let me explain:

  As you suggest, I created a new user account, restarted the computer and connected with the new account. And Yes, magic, the problem did not appear.

  So I happily spent at step 2 of your recommendation that would transfer all my data to this new account to use as the master account.

  But while I was browsing windows to copy my data the problem reappeared.

  So after some research and a few tests, I realized that the question was in fact a video file on my desktop. An .asf file to COM surrogate could not create a thumbnail *. Perhaps because of a mistake or missing codec? In any case, deleting, I solved the problem.

  Hope this feedback will help others and I hope that will come a software fix.

  Best regards

  * The COM Surrogate is a fancy name for sacrificial processes for a COM object that is running outside the process which has asked. Explorer uses the COM Surrogate during extraction of thumbnails, for example. If you go to a folder with thumbnails enabled, Explorer will trigger a COM Surrogate and use it to calculate the thumbnails for documents in the folder. It does because Explorer has learned not to trust miniature extractors; they have a poor track record of stability.

• Dllhost.exe - application error windows 7 what happens if upgrading to Windows 10

  After a power failure that I realized when power has been restored that my computer had been left there on before the failure - 3 days now I get a dllhost.exe - application error message.   I have not installed any new programs or updated everything I know before the current problem.  My question is if I download the new Windows 10 will be cela correct/fix problem dllhost.exe - my computer currently the s running on Windows 7

  I suggest that you enable restoring the system so that it is available the next time that you need.  Note that the system restore must be enabled on the operating system drive, there is no need to enable restoring the system on disks.

  Regarding the dllhost.exe - application error message I suggest that you run a Malwarebytes and a TDSSKiller scan on the machine.  If these find no parasites, then don't look at the registry of the possible clues, this error can be caused by any software installed on the computer.

  These can be useful:

  HTG explains: what Windows Event Viewer is and how you can use

  How to open and use the event viewer in Windows 7

  John

• Question of running - y dllhost.exe and dllhost.exe processes * 32 (COM Surrogate) safe?

  Hello

  I have a question about some process running for all users in the Task Manager.  I noticed the following:

  Dllhost.exe
  Dllhost.exe * 32 (COM Surrogate)

  These processes are safe?  Dllhost.exe * 32 y remains fundamentally, but dllhost.exe comes and goes.  One or the other of these processes would be malware?

  Thank you
  M

  Hi clearlyembarrassed,

  Two processes are used by many programs on the computer.

  See the link below to learn more about the process in the Task Manager.

  Understand the information process in the Task Manager

  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-process-information-in-Task-Manager

  You can also check whether a third-party program is using this service trying to clean boot procedure.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

• AV.exe and problems that result. Help, please!

  Out of nowhere, I was struck by the av.exe virus, and he made sure I couldn't open any .exe files. I did some research and found out how to change my registry to resolve this problem, and my programs open now.

  Many of the icons on my desktop and start menu are still empty, but the .exe has been reassociated. How to bring back the icons?

  I don't know if there is anything else I should do and if the virus is still there. Norton said he got rid of av.exe, but how can I be sure?

  And also, this virus affected all files outside the .exe?

  See if this article helps you:

  How do I rebuild the icon Cache in Vista

  The virus did not affect the real. Just register, EXE files.  He probably touched nothing else, the purpose of this little piece of beef handy is to extort money on your part, not to ruin your computer.

  HAL

  --

  HAL Hostetler, TCE

  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX

  www.kvoa.com - KVOA television, Tucson, AZ.

  Live Hot Licks - www.badnewsbluesband.com

• Computer runs slowly, several instances of dllhost.exe and svchost.exe consumes large amounts of CPU and RAM, please help!

  So it is currently 05:49 where I am right now and I've lost sleep over this issue these days.  My computer went from fast to slow apparently all night and I cannot understand why.  I downloaded Malwarebytes and ESET Nod 32 Antivirus free and I have Avira.  I have scoured the sysinternals Process Explorer and cannot find the root of the problem, and I just need someone better than me to help me with this problem.  I will follow all rules or guidelines, I'd really appreciate just for help!  Thank you!

  I mean not kind of, but not in a concrete way.  I backed up all my hard drive on a USB of terra, reset my computer at the store settings, basically wiping and just re - download the essential.  In fact, it works better than ever, now that it is cluttered with.  It seems barbaric, but he did a lot.

• Malware pcreg.exe and SupraSavings, windows 7

  Security Essentials does not detect them. They also are allowed in the Windows Firewall. They are in the register but do not show under installed programs. I tried to download a malware program recommended too but stops working when it starts an analysis.

  Can I delete everything in the registry?

  Are there other options?

  Delete Adware & puppies with these tools. Check the updates first and then analyze with each of them at a time until your machine is clean.
   
  
  AdwCleaner (free)
  http://www.bleepingcomputer.com/download/adwcleaner/
   
  
  MBAM (get the free version)
  https://www.Malwarebytes.org/free/
   
   
  
  Junkware Removal Tool (free)
  http://www.bleepingcomputer.com/download/junkware-removal-tool/
   
  
  HitmanPro (30 days free trial)
  http://www.SurfRight.nl/en/hitmanpro
   
  
  If necessary, reset your browsers. For IE:
  http://Windows.Microsoft.com/en-us/Windows7/reset-Internet-Explorer-settings
   
  
  Some reading:
   
  
  On these toolbars and modules - potentially unwanted programs (PUP)
  http://www.bleepingcomputer.com/forums/t/407147/answers-to-common-security-questions-best-practices/?p=3187642
   
  
   

• Windows 7 thumbnail preview in the taskbar, aero preview does not

  Just stopped working.  I restarted but still no luck.

  Guided Help: the problems of Aero in Windows 7:
  http://support.Microsoft.com/default.aspx/KB/976170
  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• IDT Audio system tray app has encountered a problem - sttray.exe and lack of Windows\system32\spool\drivers\w32x86\3\DLCJtime.dll entry: RUNDLLEntry at Windows startup.

  Dell Dimension E510 system was crushed by a virus. The files were dumped, authorized reader and a reload fee system has been done. When all files have been charged and the system is recovered, the following errors began to appear at startup:

  -IDT Audio system tray app has encountered a problem - sttray.exe and

  -Windows\system32\spool\drivers\w32x86\3\DLCJtime.dll Missing entry: RUNDLLEntry

  I'd rather be able to clear these by using the operating system disk I hope it do not screw the system. Any ideas would be nice.

  Thank you

  Dennis Holmquist

  Hi Dennis,

  DLCJtime.dll part of your Dell printer drivers. If you have or had a Dell printer, then re - install printer drivers / should solve the problem.

  Reinstall the printer. In addition, install the latest drivers from the manufacturer's Web site.

  To connect a printer directly to your computer

  Remove a printer

  See also:

  Microsoft Windows XP - add a printer attached to your computer

  RUNDLL error message

  For IDT audio error, you can install the latest audio drivers from the Dell support Web site to see if it helps.

• It is normal to dllhost.exe 3 running at the same time?

  I found 3 clocked dllhost.exe to thhe same time in windows 7 Professional is that normal or I have a virus?

  Hello

  I wish to inform you that it is possible that the number of instances of dllhost.exe is running at the same time.

  Dllhost.exe is the Windows DCOM DLL host process. It executes the DLL COM + and control processes in Internet Information Services (IIS). As such, is used by many different applications, including Visual Basic and .NET applications.

  However, there are a lot of viruses under the same name and could easily infect a computer. Let us perform a full scan using Microsoft Safety Scanner mode without failure.

  Download Microsoft Safety Scanner, start the computer using safe mode and run a full scan.

  Safe mode is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started.

  Follow the link below to learn how to do it.
  http://Windows.Microsoft.com/is-is/Windows7/start-your-computer-in-safe-mode

  Run a virus scan complete and check if the problem is resolved.

  The Microsoft Security Scanner is a security tool free to download that allows demand analyses and helps remove viruses, spyware and other malicious software. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

   

  Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please get back to us with the State of the question.

• Windows Vista starts with white screen - dwm.exe and dllhost.exe errors on the hard drive.

  original title: freezing after login! ... disk hard dwm.exe and dllhost.exe errors. As usual load screen and then nothing can be used/open to all. Occasionally start opens and closes and nothing else beyond.

  Cannot use the laptop mode safe mode with networking. Have you tried to repair registry free of bugs and using Vista install with view to repair OS repair disk, but there are a lot of people having this problem different from this problem with dwm.exe dwm.exe or versions/varieties. This is is produced immediately after the download and installation of Microsoft Updates I might add.  Please can someone help?  Thank you very much... LiZ :)

  Never use Registry Repair programs.

  They can cause more harm than good.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• When I log on windows, I get a POP up window that reads C:/windows/sysWOW64/cmd.exe and I never had this before... UST's happened the last 2 weeks... Is this a problem?

  When I log on windows, I get a POP up window that reads C:/windows/sysWOW64/cmd.exe and I never had this before... UST's happened the last 2 weeks...  Is this a problem?

  Hi KostyKrew,

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Follow these methods and check if that helps:

  Method 1:

  Step 1:

  Check if you have the similar problem in safe mode, otherwise you can try to put your computer to a State of clean boot in normal mode and check if it works:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  Follow the article to perform the clean boot on the computer:

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/929135

  Warning: After using the boot is a way to solve your problem step 3 follow-up to reset the computer to start as usual.

  Method 2:

  I suggest you to download and run the latest Microsoft security on the computer Scanner and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please follow all the steps and if the problem persists, return back and we will be happy to help you.

• My Windows 7 error has occur "" cannot find MSDVX. "» EXE"and I cannot stop him, how can solve this problem?

  My windows error has occur "" unable to find MSDVX. "» EXE"and I cannot stop him, how can solve this problem?

  Depending on the location, may be a virus/malware

  Try http://www.microsoft.com/security/scanner/en-us/default.aspx

  And

  http://www.Malwarebytes.org/products/malwarebytes_free

• Impossible to access parameters for laptop and receive an error message saying "runtime error!" Program c:windows/system32/Dllhost.exe R6034. A request did try to load the wrong C run-time library. »

  Original title: laptop - unable to access settings.

  I can't access "pc settings" on the start menu. When select, goes to white screen, returns to 'start '. Error is displayed on the desktop = "runtime error!" Program c:windows/system32/Dllhost.exe R6034. A request did try to load the wrong C run-time library. "Any ideas on how to solve this problem? Thank you

  I found the answer here http://blogs.technet.com/b/ouc1too/archive/2013/10/19/windows-app-store-doesn-t-load-after-8-1-upgrade.aspx you just have to change application manifest path, in order, to fix all other applications