Dllhost.exe - application error windows 7 what happens if upgrading to Windows 10

Similar Questions

• Svchost.exe application error, host process for Windows Services has stopped working

  Original title: Svchost.exe application error [windows loses focus]

  Every two minutes, windows 7 loses focus on the current window and I went in my event logs and found hundreds of errors of svchost.exe. Here's one of them:

  Name of the failing application: svchost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
  The failed module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
  Exception code: 0xc00000fd
  Offset: 0x0000000000018e3d
  ID of the process failed: 0x81c
  Start time of application vulnerabilities: 0x01cd7970b1953fa0
  The failing application path: C:\Windows\system32\svchost.exe
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: efb97cea-e563-11e1-a232-002655497401
  The error message I receive after automatic power off repairs in the center of the Action is "host process for Windows Services has stopped working" and the process that opens after the loss of focus is Werfault.exe.
  Thank you for your time.

  Hello

  1. when exactly do you get this error message?

  2 have you made changes on the computer before this problem?

  Method 1:

  Step 1:

  Try to start your computer in safe mode and check.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  If the problem does not occur in safe mode, perform the clean boot. Read the following article.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

  Method 2:

  Try to scan your computer with the Microsoft Safety Scanner and check.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

  Method 3:

  You try to perform the SFC (System File Checker) scan on your computer and check. Read the following article.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  It will be useful.

• BTStackServer.exe - Application error, the instruction at 0x0054eb27 referenced memory at 0x000001ef. The memory could not be read

  Sometimes my computer will display a "BTStackServer.exe - Application error' window that reads:"the instruction at 0x0054eb27 referenced memory at 0x000001ef. The memory could not be read. When this error POPs, within seconds the computer just turned off completely and I have to turn it back on. As a first step, it rarely happened, but now it will be pop up and stop a little less than 5 minutes to restart the computer. I have a Lenovo x 201 running Windows 7 PRO, and two sticks of 4 G of ram. I tried reversing the two RAM sticks from one location to the other, but that has no effect. Would it still a problem with the RAM sticks? I have the latest version of Norton Security and it shows no virus. If anyone has any ideas, what could be the cause of this it would be appreciated.

  Hello Kevin,

  Thanks for the reply.

  I'm sorry for the late reply.

  I appreciate your time.

  Before reinstalling Windows, I suggest you run the system file checker (SFC) and see if it helps.
  Reference:
  Use the System File Checker tool to repair missing or corrupted system files
  https://support.Microsoft.com/en-us/KB/929833

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Please keep us updated.

  Thank you

• When you use Windows Search error SearchFilterHost.exe - Application error

  When you are using Windows XP (SP3) running Windows Search (4.0), I get the error message:

  SearchFilterHost.exe - Application error

  The instruction at "0x0af609c" referenced memory at "0 x 00000014. The memory could not be "read".

  Click OK to terminate the program

  I do nothing especially when this happens and the disabling or uninstalling this feature is not an option that I and some of the programs that I use it. She repeats every few minutes, but I'm pretty sure it's because the application restarts whenever you "Finish". I also tried to reinstall it but to no avail. Thanks in advance for any help.

  These errors appear when the index database is corrupted, for example during the crash, etc. The solution is, except disabling or removing the search service, reconstruction of the index. Just reinstall will not solve the problem, because that does not remove the corrupted index.

  On XP Pro:

  (1) start 'services.msc' and find Windows Search stop.

  My personal advice: check user accounts all records and make sure that the "Application Data" and "Local Settings" directories have their attribute 'Index summary' unchecked, including all files and subfolders. You can avoid many possible future performance issues.

  2) go to c:\Documents and Settings\All Users\Application Data\Microsoft and delete the entire directory "Search" (or just rename / move elsewhere).

  (3) close the session log. Index will rebuild, it may take some time, depending on the amount of documents, music, etc. you have. So be patient with harddisk increased temporary activity. Normally it works with a low priority.

  On Vista/7 Search index is located in \ProgramData\Microsoft, otherwise,'s done it the same way. Unfortunately, I do not know how to avoid the real alteration. XP seems more inclined to him.

• When I try to log on my "HP Pravillion 553w" userinit.exe Application error comes up and asks me to click ok to terminalte request. What can I do to connect to my computer?

  "When I try to connect my computere"HP Pravllion 553w"userinit.exe Application error comes on and says" application failed to initialize, click on ok to terminate the program. I just want to open a session. I don't know what made it? can someone help me please.   Georgia

  Hi, Georgia,

  This could be a limitation of the fast user switching feature.

  The fast user switching feature may not work if there is insufficient computer resources to create a new Winlogon service thread. When there is insufficient resources, the system may stop responding (hang), the system may lock up computer or the user may receive a Userinit.exe error application and the following error message:

  The application failed to initialize properly (0xc000012d)

  Method 1: In these cases, some users must log on to the computer, or you must close some programs to free up the resources of the computer.

  For more information, see:

  A discussion on the availability of the fast user switching feature

  This problem may also occur due to registry settings incorrect shell.

  Method 2: Try the steps listed here.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  To resolve this issue, follow these steps:

  a. press CTRL + ALT + DELETE and then click Task Manager.

  b. on the file menu, click new task (run...).

  c. type regedit and then click OK.

  d. in the left pane, look for, and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  e. in the right pane, double-click Shell.

  f. in the value data box, type Explorer.exe, and then click OK.

  g. in the right pane, double-click Userinit.

  h. in the data value box, type %windir%\system32\userinit.exe and then click OK.

  Note The %windir%\System32 placeholder represents the path of the Windows folder. By default, C:\WINDOWS is the path of the Windows folder.
  If you type an incorrect value in the value data box, you cannot connect to the Windows XP-based computer.

  i. exit the registry editor.

  j. restart the computer.

  Check if this can help you.

• Wmp54gv4.exe - Application Error. What is it?

  Usually when my computer starts, or sometimes when I stopped I get a window that says:

  Wmp54gv4.exe - Application Error

  The instruction at '0x004442c5' refers to '0 x 00000168 '. The memory could not be "read". "."

  Click OK to finish.
  Click on Cancel to debug.

  What is - this and how I can stop it.

  I know it's simple to just go outside, but it becomes annoying.

  Sounds like your Linksys Wireless Network Adapter Software crashes. Look for an update, or uninstall and reinstall.  Also use msconfig or Autoruns from Sysinternals to prevent the program from starting when then computer starts or connect.

• Windows 7 WerFault.exe & wermgr.exe Application error

  After recently reinstall Win7 Windows Vista (which has been installed on Windows XP) on my computer began spewing WerFault.exe and wermgr.exe application errors

  I tried everything I installed AVG and scanned it returned without flaws but it becomes serious when I try to download or use automatic updates it Kicks me out or does not apply the changes I made

  "I tried Safe Mode and it does not work and when I ask new programs to install as Windows fixit he returns with an error.

  Extended attributes are incompatible"I'm about to give up with the computer if there is anything I can do please reply with MI awnser about to stop trying

  Hi Alex,

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you get an error message.

  This could be due to corruption of system files.

  Try the methods.

  Method 1:

  I suggest you perform a Scan SFC and check if it helps.

  Check the following link below.
  https://support.Microsoft.com/en-us/KB/929833

  Note: Although SFC analysis I recommend that you ensure that there are no applications or programs running on the background.

  Method 2:

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software. The Microsoft Security Scanner is a security tool free that provides analysis on demand and helps remove viruses, spyware and other malicious software. It works with your current Antivirus software. See the link to download and run the Analyzer:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application when you try to run Microsoft solve this diagnosis

  Original title: Microsoft Fix it diagnosis

  I ran Microsoft solve this diagnosis. He gave me a window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application.  someone knows how to fix this?

  Thank you

  FOR EXAMPLE

  Hello

  Thanks for the reply. Until I'm your answer I have restored the laptop to the State of origin, with the possibility of restoring elements that had been added by the user. I'm trying to update windows, etc.. If I get errors or problems I will post them here. Thanks for your detailed response.

  Eddie

• AccelerometerSt.exe - Application error

  AccelerometerSt.exe - Application error

  "The application was unable to start correctly (0xc000007b). Click OK to close the application. »

  It happened after trying to install the windows 8.1 update and my computer went to a black screen. It is in this State for a while and I had to go so I stopped it. The next time that I turned it on, the update had already completed and I had windows 8.1. Everything works well except for the error message that appears whenever I turn on my laptop. I have no idea of what he does, but when he arrives, it annoys the hell out of me. If anyone can help I would really appreciate it.

  In the menu is uninstall programs, 3D driveguard program it listed?

  If so you can try to uninstall it, restart, and then reinstall the program.

  The problem is definitely with this driver because what is the accelerometer is to have the program 3D driveguard Park the heads of the hard drive in case of bumping or dropping the laptop low rise.

  Unfortunately, I only got the drivegard 3D or ProtectSmart driver install and work, so I don't know what you need to do to clear this error, since reinstalling the driver did not work.

• Error: dwwin.exe - Application error when executing Fallout2.

  Original title: dwwin.exe - Application error

  Hello
  I get this error when you run Fallout2 on my computer (Win XP SP3)

  dwwin.exe - Application error
  X with the exception of the breakpoint
  A breakpoint has been reached.
  (0 x 80000003) occurred in the location of the 0x7c90120e application.
  Click OK to terminate the program
  Click on Cancel to debug the program.

  When I press Cancel to debug the program, it crashes and I have to ctrl + alt + delete to get the Task Manager to end the process to ensure rear control.

  Any advice on what the problem is & how should I solve this problem?

  Thank you

  Hello

  1. what version of Adobe are you running?

  2. when there is this starting happening?

  3. did you other software on the system changes?

  This error can occur if virtual memory is too high.

  You can check the virtual memory settings.

  Set it to 1 on 1 time and a half the size of RAM installed.

  For more information, you can consult the following article:

  How to set performance options in Windows XP

  Did you installed Dell Quickset?

  If installed, then update the same thing and check.

• "Explorer.exe - application error" code 0x032d0fef

  Hello

  I have a problem with my windows 7 professional service pack preload. Sometimes I open a windows folder displays an error message "explore has stopped working... and then he retrieve as Explorer begins with success...» Sometimes give a warning entitled... "Explorer.exe - application error.

  and contains "the instruction at 0x032d0fef referenced memory at 0x032d0fef. The memory could not be written. Click ok to complete the program." While what happens sometimes, I will shut down my system.

  Can anyone give a solution for this?

  The module that seems to be the question is the UninstallExplorer32.dll:

  Fault Module name: UninstallExplorer32.dll_unloaded

  The UninstallExplorer32.dll seems to be a component of IObit Uninstaller:

  http://SystemExplorer.NET/file-database/file/uninstallexplorer32-DLL/21192656

  Can you try to update or, if necessary, uninstall IObit Uninstaller.

• HP Envy 7 ": HP laptop"logonui.exe application error"+ auto repair restarts without end

  I really don't know exactly what is the name of my product, however, my problem is very specific:

  First I got an error message titled something in the sense of "logonui.exe application error" with a background black, I couldn't start my laptop up so I went to recovery and just all backed up successfully and went to reformat but it got stuck at 2% until he finally said the Recovery Manager has stopped working , I tried just about everything until finally my laptop just say 'auto repair start' goes to a blue screen, restarts and repeats again and again. I can't really do anything, it seems pretty well doomed. It seems like a virus, but really, I don't know what I can do, if the only solution is to send in for repair, can I try now?

  Kind regards

  Josh

  I get the "HP Recovery Manager failed. Error code = 0xEFFFFF08"pop up whenever I try to get back and I'm not using any USB devices.

  I ran a scan of the hard disk on UEFI and my results have been:

  Smart Check: spent

  DST short: failure

  Failure ID: QCQ7PH-7RK701-XD7WMF-60VL03

  Product ID: N1L03EA #ABV

  Hey!

  "The 'LogonUI' in Windows application manages your startup and shutdown graphical user interface (GUI) that displays the Windows on your screen logo and the status of your judgment." It also displays the login screen that you see when you start the PC. Corruption in this application could lead to problems start and stop, such as gel. »

  I found this paragraph from a titled link: LogonUI.Exe Application error after update 8.1 of Windows that can help you! There are a few in there troubleshooting steps that may help.

  Here is a Microsoft document for you to read as well. This is called: error: LogonUI.exe application error.

  I understand what you are saying about this marking as resolved. Tell you what, read the links I provided on the error in the application (which, from what I've read, in my opinion, does not sound like a virus), replace the hard drive and then if the issues are resolved for you, come back and mark this question as an acceptable Solution for others.

  I wish you the best!

• Pavilion x 360: AccelerometerSt.exe - Application error

  From the start, I get the following error.

  AccelerometerST.exe - Application error - the application failed to start correctly (0xc000007b).  Click OK to close the application.

  My system shows now that he needs for the update but it will not complete the process.  No matter if I select shut down or restart.

  It started a few weeks ago.  What should I do about it?

  Hello

  Try the following.

  Open Windows Control Panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall - don't worry if you get an error at this point, just continue.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• On startup, I get the following error: spoolsv.exe - Application error

  On startup, I get the following error:
  Spoolsv.exe - Application error
  The instruction at "0 x 10002837" referenced memory at "0x00000000".  The memory could not be "written".

  Then the print subsystem stops.  Windows update service keeps control and verification.  I let go 20 hours and it is never resolved.  I can't open some applications requiring printers.  Help please.

  Bill

  Hello DragonBill,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Regarding your question, the most common cause of the error is an abundance of. SHD and. Files in the directory of spool SPL.  These files are created by the spooler to save data delayed a print job.  The. SPL file contains the drawing commands and the. SHD file contains information of working parameters the print job.

  To try to correct the application spoolsv.exe error, you must remove these files from the system.  To do this, perform the following steps on your Windows Vista computer:

  1. open the Control Panel, select Classic view, select Administrative Tools and then select Services .

  2. in the Services management console, find the Spooler service, right-click on it and select stop.

  3. then open the folder C:\Windows\System32\Spool\Printers .  (Here, we assume that your Windows is installed in the default C:\Windows folder)

  4. delete all the . SHD and SPL files in this folder.

  5. then open the TMP folder and delete all the old, unused files in this folder.

  6. Finally, restart the spooler from the Services management console service.

  Important note: If you are unable to delete the files in Normal Mode, then you may have to restart your computer in Mode safe to delete files.  To start your PC in safe mode, press F8 when the system restarts, and then select the Mode option safe mode from the Windows Advanced Options Menu.

  If deleting the files do not straighten out the problem, you must perform a system restore and restore your system to the times before when the error started appearing on your computer.  A.m. run the restoration of the system, open Start, all programs, Accessories, System Tools , and then select the System restore option.  On the Welcome to system restore screen, select the restore my computer to a time option earlier and select Next.  In the Select Restore Point screen, select the date that represents the restore point to which you want to restore your computer back, and then select Next.  Finally, check and then click Next again to confirm your restore point and restore of the system.  Restart your computer when you are prompted, and then press OK to close the end of System Restore screen.

  It is important that you know that application errors can also occur because of virus or spyware infections.  In fact, the Spoolsv.exe process is also a known backdoor vulnerability which can be planted on your computer for malicious purposes by an attacker.  Therefore, if you see an unknown process running on your system, you must take appropriate measures to remove them.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• QuickBooks error message: qbw32.exe - Application error: the instruction at "0x56461f49" referenced memory at "0x02ec4360". The memory could not be "read".

  I am running Windows XP Professional Version 2002 w/SP3. QuickBooks Pro 2008 is installed on it. Whenever I close the program, I get an error message: qbw32.exe - Application error: the instruction at "0x56461f49" referenced memory at "0x02ec4360". The memory could not be "read". I have absolutely no idea of what that means. The message will only appear when it terminates the program and does not do. Any info is greatly appreciated.

  Hi stickman397,

  This error occurs during the installation of QuickBooks is damaged. To resolve this problem, follow the steps in the link below:

  http://support.QuickBooks.Intuit.com/support/pages/knowledgebasearticle/1008533

  Kind regards

  Imran M

  Microsoft technical support