DM1-4341ea

Similar Questions

• Indicators LED HP Pavilion dm1-4341ea

  Just bought one of these notebooks, but it is not all the documents with him and I can't find the answers through Google, so I hope someone here can answer my questions :-)

  1. is it possible to tell when the battery ended up filling without switch on the machine and check battery meter in Windows?

  2. Why does the power light display sometimes orange instead of white?

  3. why the hard drive LED shows sometimes orange instead of white?

  That's all! ;-)

  Thank you

  Hello:

  Here is the link to the support page and drivers for your laptop.

  http://h10025.www1.HP.com/ewfrf/WC/product?product=5337681&CC=US&DLC=en&LC=en&Query=DM1-4341ea%20&Tool=

  You will find a link to manuals on the right side of the page. Click that and you will find the user's guide and service manual.

  I don't know what mean the colors on your model.

  On mine, when the power supply light is orange and the PC is connected, it means the load.  When he is blue, that means he is in charge, and when the laptop is turned off and the charging light turns off, this means that it is fully charged.

• Reset bios password for pavilion dm1

  Hello world

  I have a hp pavilion dm1, I put the bios administrator password and power on of.

  And, I forgot the bios administrator password. When try to enter a tree once it

  present the error 56528373.

  Windows 7 HP 32 bit

  prod n.o QJ516EA #ABU

  sys bios F.19

  some kind spirit can help me please!

  tanks

  Jose

  (jesus no c = JC)

  MCI Try.

  49480975

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• HP Pavilion dm1 Notebook pc: black screen

  My screen goes black when I start windows 7 on my laptop of Dm1 Hp Paviliom. Also, I have connected my pc to an external monitor via VGA cable, and then I can see the windows operating system in the external monitor. I did a test to start and then I got these results:
  Memory test: past

  Smart check: past
  Dst short: past
  Optimized DST: Software error
  Battery test: primary past secondary - has NOT been

  PCI device control: past.
  -----------------------------------------------------------------------
  Starting test: past
  
  Does anyone have an idea of this behavior? How can I solve this problem

  Hi @ljuserhpfor ,

  Thank you for visiting the Forums HP's Support and welcome. I appreciate all the information and the results of the tests that you did. I looked in your question about your HP Pavilion dm1-3025dx Entertainment Notebook PC and the laptop does not start. In my view, that the question is called the RTC battery. (Real TIme Clock).  Here isa document to show you how you can replace that.

  If you see things very well on a screen, it might be a bad driver has been installed. You can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop.

  When running a system restore note remove all USB devices. Disconnect all non-essential devices because they can cause problems.

  Hope it will be useful.

  Thank you.

• HP pavilion dm1 - test memory failed

  My Hp Pavilion dm1, hangs as soon as windows starts. I went the system diagnostics and ran the development of the system, but it failed. Here are the results:

  Memory test: failed

  Failure ID: 9C4FNJ-5NU6J9-MFH15F-404303

  PRODUCT ID: LW200UA #ABA

  I don't know if I have a faulty memory module or if it is a problem that can be fixed with a system restore? Can someone help me please?

  Hello:

  You need to replace the memory module.

  Try first, remove and replace it.

  If you get the error, buy one with the same characteristics as the bad.

  If your laptop is still under warranty, contact HP technical support for a replacement of the faulty memory Strip guarantee.

  Make sure that you remove the battery and disconnect the laptop power adapter before working inside.

• HP Pavilion DM1: Pavilion DM1 * clean * Win7 install... no COA sticker?

  My wife has an HP Pavilion DM1 is a slug running and I want to do a clean install of Win7 without all the bloatware that is come upon her, but realized that this little book is not a Microsoft COA top sticker to do the reinstall.  HP did ship of this machine without an activation code Win7 on it?  If Yes, is there a way I can get the code to make a * clean * install or should I just use the system recovery disk to go back to the factory?  I have a few old machines COA stickers, but did not burn one if I had to.  Any help/info is appreciated.

  You are the very welcome.

  The recovery disks should be pre-activated and there should be no need to enter a product key.

  But you will need to uninstall the bloatware that will be reinstalled, unless your recovery disks for a reduced recovery.

• HP Pavilion dm1 Notebook: after formatting drive HARD Windows Activation failed

  My laptop (HP Pavilion dm1z-3000) comes with Windows 7 Home Premium 64-bit. My system was full of junk it was not usable. I tried to use the feature of HP recovery, several times but it still fails. So I decided to format and reinstall Windows.

  I got a copy of Windows 7 Home Premium 64 - bit OEM I bought for a desktop computer. Before formatting, I used a software key finder to get the Windows key from the original Windows 7 installed on my laptop, so I could use it to validate the other copy of Windows 7, but I found that I get an error 0xC004F063 code, the computer BIOS missing licence reqd

  Help, please.

  MrN1ce9uy wrote:
  

  My laptop (HP Pavilion dm1z-3000) comes with Windows 7 Home Premium 64-bit. My system was full of junk it was not usable. I tried to use the feature of HP recovery, several times but it still fails. So I decided to format and reinstall Windows.

  I got a copy of Windows 7 Home Premium 64 - bit OEM I bought for a desktop computer. Before formatting, I used a software key finder to get the Windows key from the original Windows 7 installed on my laptop, so I could use it to validate the other copy of Windows 7, but I found that I get an error 0xC004F063 code, the computer BIOS missing licence reqd

  Help, please.

  Well, this would mean that you have to order the official HP recovery media to restore factory.

  http://support.HP.com/us-en/mediaorder/HP-Pavilion-DM1-entertainment-notebook-PC-series/5032670/model/5051914/softwareitem/646869-001/STEP1

• HP Pavilion dm1-4020sa: PCI Express Root Complex (Code 28) - driver missing

  Hello

  Using a HP Pavilion dm1-4020sa Entertainment Notebook PC.

  I just did a clean install of Windows 10 (build 1511) as well as all Windows updates. Currently I'm missing a driver on PCI Express Root Complex (code 28) and despite all my efforts to find the missing driver (I tried to use HP Support Assistant as well as the HP Web and Google site search), I can't find what I'm after. Please can you help me?

  The identification of material information is as follows:

  ACPI\VEN_HPQ & DEV_0004

  ACPI\HPQ0004

  * HPQ0004

  Please let me know if there is any more information you need.

  Thank you very much

  Lee

  Hello:

  You need the driver for this device...

  FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64144.exe

• EliteBook 8440p; DM1-3020us: 2x4gb 1600 MHz DDR3L works in Pavilion DM1 but not Elitebook 8440p? But both are supported than 1066 MHz RAM

  I have two Elitebook 8440p PCs that both run an Intel i5 520 m (although one of them has a discreet Nvidia NVS 3100 m, while the other does not and use the integrated graphics card Intel).

  I also have a Pavilion DM1-3020us with an AMD E-350 APU; It's the only other PC I own which takes SO-DIMM DDR3 modules.

  I just bought this Crucial DDR3L 1600 MHz 2x4gb hoping to use it with the 8440p without the graphics from Nvidia:

  http://www.BestBuy.com/site/crucial-2-Pack-4GB-1-6GHz-PC3-12800-DDR3L-so-DIMM-Unbuffered-non-ECC-lap...

  However, it causes crashes and BSOD as soon as he tried to start under Win7 64 bit on both 8440 p PCs.  Also when trying to boot Linux Mint 18 I empty a kernel panic, and run Memtest86 + just leads to restarting the PC within seconds.  Yet, I can navigate through the BIOS throughout the day and it will continue to work very well...

  But here's where it gets really weird - the RAM works perfectly fine in my laptop DM1 Memtest86 + and Win7 64 bit (I use it as I type this).  What's curious?  Because both the AMD E-350 and the Intel i5 520 m only support up to 1066 MHz RAM!

  The only thing I can think is that there is something wacky where RAM is unable to operate at 1066 MHz at 1.5V or is not able to run at 1.5V to all E-350 1.35v support (and 1.5V RAM so that the i5 520 m only supports 1.5V) which itself would be really strange that Micron (which actually manufactured the RAM) States on their website that their 1.35v and 1.5V RAM have actually the same die (a bit like mobile i7s quad vs quad I5S Office) and that both can operate at 1, 5V, implying therefore that the 1.35v product is simply a higher binning:

  https://www.micron.com/~/Media/documents/products/technical-note/DRAM/tn4114_ddr3_1_35v_1_5v_compat...

  Crucial live chat support, however, closed several hours for the day, so I thought I would at least make this post in the meantime.

  Hello:

  Please see this thread, and the discussion that I posted in this thread... and you'll have your answer.

  6550 b has the same chipset as the 8440p.  I posted the link to the site from NewEgg for the memory, you need to buy if you live in the USA/Canada in the discussion that I've referenced to the other person who had the 8440p.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/RAM-memory-modules-that-actually-work-for-HP-EliteBook-8440p/m-p/5570634#M335108

  There are several discussions on this issue if you want to find even more.  Everything is solved by specific G.Skill memory I posted.

  The extent of why it works in the dm1 and not the 8440p, the chipsets are different.  The Intel chipset in the 8440p doesn't support voltage DDR3L.  Comparison of AMD and Intel chipsets are like comparing apples and oranges.

  I also believe that the chipset amd in the dm1 is more recent than the chipset in the 8440p and promotes low-voltage memory.

  I have just return from memory and use the gift card on something else.

  I doubt that Best Buy has this specific memory.

• Disable password in dm1

  I want to disable the password in my laptop. HP Pavilion DM1, Windows 7 Home Basic 64 bit.

  Hello

  You can remove the need for a power on password as follows.

  Shut down the laptop.  Now on TAP the ESC key as soon as you press the power button to access the start menu, then select f10 to open the Bios menu.  Use the arrows to select the Security tab and press ENTER.  Use the arrow keys again to highlight the power on password and press ENTER.  Enter the current password and then the new password, simply leave this blank and press on enter - do the same for the confirmation field.  Press f10, select this option to save the new settings and press to enter.

  Kind regards

  DP - K

• HP pavilion dm1: need help to find the correct drivers

  Hello

  my laptop was incredibly slow, so I formatted my drive and reinstalled windows 7. Now to looking for reinstall the proper drivers, but can't find the right one.

  My laptop is a HP Pavilion dm1, model 3387 36.0 A (according to CPU - Z)

  K12 F.01 BMI and Bios HP AMD chipset

  If you need more information please let me know.

  Thanks in advance for any help you can give,

  with sincere friendships.

  Low van den Dungen

  Hello @Bas4,

  Thanks for the quick response!

  Please use the following link to find the product number of your laptop:

  How can I find my model number or product number?

  Using the product number, follow the instructions in my previous post, and you should be able to access the drivers for your product.

  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• Laptop Pavilion dm1 4010us and beats audio Panel does not work.

  I have a pavilion dm1 laptop 4010us, running windows 7 64 bit and beats audio Panel does not work.  I click Start, Panel, Sound and the Beats Audio Control Panel icon is there, but nothing happens when I click on it, so I can't change my audio settings.  Help, please

  Hello

  Try to use Recovery Manager to reinstall the IDT HD Audio Driver (this will also reinstall the Beats Audio interface) - how to use the Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

  http://support.HP.com/us-en/document/c01868333

  After reinstalling, restart the laptop.

  Kind regards

  DP - K

• HP Pavilion DM1-311oen / Star-Up error

  HP Pavilion DM1-311oen. Windows 7

  DST short: failure

  Failure ID: UO82XX-5HX6R3-MFH141-6OTSO3

  Hard drive 1

  My laptop not working at all.

  Hello

  Error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced.  This is also consistent with the question of commissioning.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• DM1 - 4160ca screen well not curly

  When you open the lid of my laptop dm1 - 4160ca, the screen would not fix itself well and freely shake a few degrees backward. I found the reason to be LCD screw was tightened on the hinges on both sides at halfway. Once fully tightened, the problem has been resolved except for the following:

  Clips (no screws), which was quite easy to remove the frame of the screen. But the middle part of the bottom of the frame was glued directly on the black strip of the circuit board to the LCD screen. When I tried to remove the framework (like careully I could), it looks like that I ripped out of some of the thin wires between the frame and the LCD. I disassembled the many laptop computers and screens and never come across anything like this before.

  Now when I turn on the laptop, the entire screen is half grey, half white (from left to right). And I check the cable of the screen on both sides.

  I would like to know your thoughts if I messed up somewhere or it's a bad design of HP?

  Thank you.

  I've included better pictures this time. You can see there are two ribbon cables come from what looks like an inverter. I could not hang the torn offline. It was probably welded or glued with care or something like that. I ended up ordering a new screen, $65, which is not bad.

  

  

• Pavilion dm1: Pavilion dm1 does not illuminate

  Hello. My pavilion dm1 stopped turning. When the battery is in it is plug in, nothing happens and no lights. I tried holding power button thing. Did not work. When the battery is removed and it is plugged into the socket the led lights blue solid but nothing happens. Be great if someone can point me in the right direction.

  Thank you Michael. I thought as well.