DMP with printer

Similar Questions

• HP Envy 4504: Envy 4504 photo prints too red with print quality = better

  Hello

  I hope someone can help.

  On my HP Envy 4504 photos are printed OK print normal quality, but when the print quality is set to best photos are printed to the red. In addition, with DPI Maximum printing photos are much too red.

  This takes place two times printed on paper Normal and on Photo paper

  With the GIMP, I tried to make an example of how a photoprint looks like.

  I made the example by changing the color Balance: Red cyan - about + 40:

  (my GIMP is Dutch...)

  

  Here is the result:

  LEFT: Photo printed in normal quality; Photo on the RIGHT printed in better quality:

  

  I have already completely remove the software HP Envy and did a clean reinstall. No change.

  I have print-head - cleaning cycles (2 times); color of HP-testprint strips looks very good: all are strong in alignment is correct

  Unfortunately: No picture change in best quality still too red.

  The ink levels are okay.

  Any suggestions what is wrong and what can solve this problem?

  Thank you for your support

  Kees-Jan Timmer

  Hi @Kees-Jan,.

  Welcome to the HP Forums!

  I noticed that your HP Envy 4504 prints photo is too red with print quality = best on Windows 10 operating system. I'm happy to help you!

  Where a setting is disabled, with GIMP, have you tried to print photo quality with other programs? If so, what happened?

  You use genuine HP cartridges or refills?

  None of your ink cartridges are low or empty?

  In the meantime, please make sure that all the steps in this guide, fixing poor print quality are executed. And let me know what happens!

  Thanks for posting and hope to hear from you soon!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• Connected HP OfficeJet Pro 8600 Plus status reads "problem with printer."

  I could just ePrint on an OfficeJet Pro 8600 Plus replacement and them have not used for printing yet. I was in the devices page to manage the settings and change an address for one of my devices. The newly added column 8600 State reads 'Online', but also 'problem with printer '. Instructions I was referring to the display panel of the unit for Outlook2003 on the given problem. A check of the display surface showed no information, just a typical home screen. I checked through the display print and found no problems-all functionality is enabled and fully functioning. I checked then the functions of printer in the window 'Printers and devices' of all computers (all running Windows 7 Professional) on the office network. The 8600 are active and full functionality works correctly between the printer and all the computers.

  I then close the printer 8600, left for several minutes, and then lit it back and reconnected. The State says 'Problem with printer' remains in the device window HP.

  I am at a loss as to what this supposed problem can be and don't know what should be a next step. Does anyone have any advice or information that could help in this situation? It would be appreciated. Thanks in advance to those who could help

  HP support responded to my question by e-mail. I was told that the message 'Problem with the printer' is due to a bug in their system. Also said that as long as the status column indicates the printer is "Online" and everything else is fnctioning correctly, don't worry about this.

  I consider that a resolution of the post!

• My lexmark wireless printer seems to not work whenever I run paper he says not comm.with printer

  I have a lexmark wireless printer that seems not to work whenever I run paper, its says not comm with printer

  Hi chinny111,

  ·         If it works well before?

  ·         Did you change?

  ·         What is the operating system installed on the computer?

  You can see the following Lexmark article and check if it helps.

  "Communication not available" or "Document Failed to Print" Error Message and the print job hangs in the print queue

  Respond with more information so we can help you best.

• After the installation of Vista update, receive the error code 21 with printer software

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas

  Download update for 32-bit Vista because brother MFC3220C box to restart the printer says cannot start error box App Installer says error code ['C:\USA\Install\3220C\Inst32.exe'] 21. I added Vista Ultimate 32 bit. I went to the brother site and talked to technicians and as usual runaround says I need to update with the new printer (Yes, well, well, if I do it will of course not brother!)

  * original title - printing with printer Brother MFC3220C problem. When I install the update to run 32-bit Vista; I get to the part of the installation where I plug the USB cable and the printer software will block upward. I get a code on the reboot error code ['C:\USA\Install\3220C\Inst32.exe'] 21 *.

  John Walker

  You must get your drivers for your Brother printer if possible from the manufacturer.

  Anything here useful?

  http://welcome.solutions.brother.com/BSC/public/as/au/en/DLF/download_index.html?reg=as&c=au&lang=en&prod=mfc3220c_as&dlid=&flang=English&OS=74&type2=-1

  There is also a uninstall tool mentioned that you can use to reinstall through Windows plug-and-play.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• How, please, directory of files to print, or doing screen print or transfer to Excel so I can leave with print?

  How, please, directory of files to print, or doing screen print or transfer to Excel so I can leave with print? Windows XP

  There are various ways to accomplish this, but the easier no doubt is to use the (free) Karen's directory printer .

• HP Color LaserJet MFP M277 Pro: Problem in black with print on the right side of the paper on a HP Color LaserJet Pro M277dw MFP

  When I print a page of text or an image to be in color or black and white about 1.5 inches on the right side of the page, the black part is dimmed.  I tried to shake the black toner, but nothing has changed...  Should I replace the black toner?

  Hey @candreas,

  Welcome to the Forums of HP Support!

  I see that you have some problems with printing faded on the side of your impressions of your printer Laserjet M277dw range. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to solve print quality problems with your printer.

  If after following the above, are you always see fainted to prints, either the cartridge or the printer needs to be replaced. You can contact the HP Support by clicking here and filling out the form below.

  Please let me know the results after following the above. If you are able to improve the print quality or to reach a resolution with the support, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• What is the number of spare parts of the neck strap that comes with ILCA - 77M 2 (with printed logo a77II)?

  What is the number of spare parts of the neck strap that comes with ILCA - 77M 2 (with printed logo a77II)?

  Kind regards

  Michael

  Hi cmosse,

  Welcome to the community of Sony!
  Good day and thanks for the comment. The part number for the neck strap is 4 - 535-925-01.

  For further assistance about your concern, please contact us recommended to visit our Sony Global Web site for more information on contacting the Sony's Support centre in your area to http://www.sony.net/SonyInfo/Support/.

  If my post answered your question, please mark it as "accept as a Solution.

  Kind regards
  Zander

• I have a problem with printing on Windows Vista.

  I have HP desktop with Microsoft Vista operating system.  The printer I have is HP Laser Jet P1006.  1 months ago about the computer wouldn't print or download an attachment to an email.  I uninstalled the printer and re-installed, but the problem persists.

  What happened, it was this.  With an email (from gmail.com or hotmail.com) once I clicked 'print', the normal menu for printing that should go up.  Then I clicked 'print', the monitor would show a display of the menu "save under" and showed the formulations of XPS as 1 line and XPS Documents like the following line.  When I chose the option search for a printer and typed in the name of the HP Laser Jet P1006 printer and click "select", the system responded to that file name is not valid.

  Please explain what was wrong and how to fix these problems with printing and download of attached file.

  Hello

  Please contact the Microsoft Community.

  Have you tried to print using a different printer?

  I would have you try the steps of troubleshooting in these articles.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/troubleshootResults/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_e97ce00a6f76436cc859bfdeb053ce01=wsrp-navigationalState%3Daction%253Ddoclist%257Ccontentid%253DK.01.05.02&javax.portlet.tpst=e97ce00a6f76436cc859bfdeb053ce01&sp4ts.oid=3435682&ac.admitted=1402468218790.876444892.492883150

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&CC=UK&DLC=en&LC=en&product=3435684

  Note: I would first try to 'doctor HP Print '.

  If this problem is limited to the HP printer, so I'd like you to contact the respective support]-

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=3435684

  We know if you need help.

• compatibility with print shop deluxe version 21

  is Vista compatible with Print Shop Deluxe Version 21?

  Switch which autour...

  It should be "V21 PrintShop Deluxe' which is or is not compatible with"Windows Vista".  After all - "Windows Vista", probably has use beyond "PrintShop Deluxe v21" running and does not install other software (is the operating system.)

  You would ask those who make the software in question.  I remember having said something similar on this software very recently...  Something about v22 works on Vista but not Windows 7.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/why-wont-the-printshop-20-professional-load-in/d7ec4f68-84ff-41dB-895F-01c46482a37c

  If you already have and it will install/work - there is your answer.

  If you plan to buy - why not get the latest version you know works and are still supported?

• Impossible to combine printing without margins with print on both

  Using the HP 8100 x, I am unable to print on both sides (using Flip on long edge) and printing without margins.

  On the first page impression without margin does not work well. It covers the whole page. There is a white bar on the left to the bottem of the page.

  It is impossible to use printing without margins in combination with printing (automatically) on both sides?

  Hello

  To print duplex automatically the printer need the edges to put the papers autour is why we cannot print double-sided and without borders. In fact printer wll notifying/warning you: he can do and it resets automatically. If you want to print borderles for sides of bot, just printing one side (one page) and then put the paper in the tray to print, and then on the other side using TWO print jobs.

  Hope that answers your question.

• Help with printing from DOS programs

  I use Visual dBase for some shows and I have a problem with printing from there.  I can print programs Windows and internet but not Visual dBase.   Does anyone know a solution to this?

  Hey, Tsalagi.

  Based on a quick search, I found two programs that might interest you: at least some say that this allowed them to print from DOS in Vista applications.

  I hope this helps!

• printing with printer deskjet 2050 using the black cartridge only

  printing with printer deskjet 2050 using the black cartridge only

  all solutions? PLIs answer me. thanx

  Hi d33com,

  Follow the steps below to set the black ink only.

  1. open the printing preferences (step 1)

  2. click on the Advanced button (step 2)

  3. click on the drop down arrow next to the print in grayscale to change black ink only.

  

• MMC hangs with print server when I try to print a test page for the server. Windows Server 2008R2 Printer HP1606n

  MMC hangs with print server when I try to print a test page for the server.

  Windows Server 2008R2

  Printer HP1606n

  Signature of the problem:
  Problem event name: BEX64
  Application name: mmc.exe
  Application version: 6.1.7600.16385
  Application timestamp: 4a5bc808
  Fault Module name: hp1100su.dll
  Fault Module Version: 0.3.1.36655
  Timestamp of Module error: 4dba6516
  Exception offset: 00000000000159bd
  Exception code: c0000409
  Exception data: 0000000000000000
  OS version: 6.1.7601.2.1.0.272.7
  Locale ID: 1033
  Information additional 01:00 c 6
  More information 2: 00c62f6d4134d9a2c3306d7c5b5b94b0
  3 more information: c9eb
  Additional information 4: c9eba0fb841db4dab90b359385c03455

  The module that seems to be the cause of the accident is the hp1100su.dll:

  Fault Module name: hp1100su.dll
  Fault Module Version: 0.3.1.36655

  The hp1100su.dll is a part of the driver for the printer.

  What you could try is uninstalling and reinstalling the driver of printer using the version of HP.

  I believe that the following may be the printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=4110410

• Problem with printing in format Adobe acrobat, DC

  Help

  I have can´t open the Printmenu and print my documents in format Adobe Acrobat, DC

  Since some day´s a can´t print my documents in Adobe DC.

  What I did:

  0 reinstall new driver for my printer

  1. New Installation of Adobe Acrobat DC

  2. Installation of the New Apple OS X el Capitan software.

  3. what once again deleting the installation of Acrobat and the installation of new Adobe acrobat DC.

  4. all other software can use the printer on my system.

  Important: before that I had problems with printing works I didn t have had problems.

  What can I do?

  Thank you

  Neugebauer, Germany

  Hi frankn30090339 ,

  Sorry for the inconvenience.

  You can download the latest patch that contains the resolution of this problem.

  Please see this link: failed to print in Adobe Acrobat format

  Let us know if you need additional assistance.

  Concerning

  Sarojini