DMS - CNSC integration/configuration

Similar Questions

• NEED EXAMPLE AD INTEGRATION CONFIGURATION ON ACS 3.3, 5.3

  Hello

  Please give example of associated RADIUS in Windows server 2003 Active directory configuration.

  The same way need step by step configuration AD GBA.

  Please help on this. I searched a lot but do not receive the correct docs who say these two things.

  I need to configure end users (without thread or L3 device)--> ACS--> LDAP for authentication

  Kind regards

  Santana

  Before you integrate ACS 5.x to the announcement, make sure that the time zone, Date & time on the ACS matches that on the AD PDC. Also, set the DNS on the ACS server to be able to resolve the domain name of the ACS 5.x. complete these steps to configure ACS Application Deployment Engine (ADE-OS) 5.x:

  Please follow the link for step by step configurations below because it is not possible to paste here complete as follows:

  http://www.Cisco.com/en/us/products/ps9911/products_configuration_example09186a0080bc6506.shtml

• Integration of CRM - username not valid error message

  Hello

  I learn SFDC-Eloqua integration, for that I use my sandbox eloqua (there is little contact) and the instance of salesforce trail (there are no data).

  I gave username admin and the password in "intégration CRM Configuration" page in Eloqua CRM integration configuration section. I get the following error message.

  Validation error: INVALID_LOGIN: invalid user name, password, security token; or locked user.

  I know that the username and password are correct.

  Please let me know what happened here!

  Thank you

  Rama

  Hi Arnaud,.

  These error messages are passed directly from SFDC in the application. In this case, SFDC rejects your newsletter. Your instance of the trial there API? Usually it used. If you want to learn SFDC, its best to get an instance of developer. There is a limit on the number of users admin (2), and the number of assets you can have under the main entities (contacts, accounts, leads), except that it is a full version of Ultimate SFDC, so has enabled API, the full user management, can create and develop whatever it is, etc.. You can get a free developer account (for life!) here: http://developer.force.com/

  If your instance of the trial has active API, then the credentials are unfortunately incorrect, or you have enabled security controls which are originally the connection information will be rejected. Turn off all options IP Whitelisting, login restrictions, etc., and then reset the password, reset the security token, and try again.

  Just as a reminder, a format suitable to the SFDC password and security's token:

  passwordTOKEN

  So no spaces, no colon, no element of connection, simply paste the token in the end of your password. Make sure that you aren't picking up any extra spacebands or formatting if you copy and paste the token.

• Installation of WLAN Driver Satellite Pro A200 to WXP

  Hello

  I installed Windows XP SP2 for a client on Satellite Pro A200 (PSAE7E) and installed after is spoken in the German support hotline all drivers as in the test - instal .txt but I don't get the Atheros WLAN card to work.

  It is an ar5bxb72 of Atheros, but no way.
  I get all of the drivers in this list only works with the hardware, but not the card WIFI but I installed it in the list.
  Someone has a tip for me?

  Welcome them
  Marco

  Hi dude

  Are you sure that the laptop was equipped with the Atheros WLan card? According to some information that I found in the internet, this laptop comes with an Intel or Atheros WLan card!

  I checked the page Toshiba provides an Intel WLan Atheros Wireless Lan Client Manager and drivers. The Wireless Lan Client Manager is not the driver, but only the tool that helps you to configure your wireless network card and gives you more than the functions integrated configuration of windows configuration options.

  I recommend to download this portal Toshiba WLan WLan driver:
  http://APS2.toshiba-tro.de/WLAN/

  By the way; If you use XP on this laptop preinstalled Vista you will need to update the BIOS to version XP too!

  Greetings ;)

• CQ5320F: Try to install GT610 gpu for WIN10 "Nvidia kernel error" resulting in WIN7 - help?

  The compatibility WIN10 check me has informed than our desktop Compaq Presario CQ53320F with integrated NVidia GeForce 6150E nForce 430 graphics and 3 GB ram running WIN7 required updates for WIN10. It is the child, not a player - computer and I already bought a new machine, so I wanted to update it.
  
  I installed an EVGA NVidia GeForce GT610, PCIe 2.0 gpu and current pilot worm. The motherboard has x 16 PCIe extension and seemed compatible. But in WIN7, I get a "driver Nvidia Windows kernel mode" error followed by black graphic display or distorted and cpu freeze. I stressed Bios PCIex16 adapter. Compatibility WIN10 check can still see original integrated configuration while the properties of the system sees now 8 GB of ram and pilot of the card/GT610. Any ideas?
  
  Computer technical page - http://support.hp.com/us-en/product/Compaq-Presario-CQ5000-Desktop-PC-series/4079828/model/4107323
  
  Technical page of motherboard -http://support.hp.com/us-en/product/Compaq-Presario-CQ5000-Desktop-PC-series/4079828/model/4107323/...
  
  Technical page of GPU -http://www.geforce.com/hardware/desktop-gpus/geforce-gt-610/specifications
  
  Thanks in advance!

  To close:

  Contacted Nvidia for a second time.  They volunteered that it might be a bad card and sent a replacement.

  Installed and allowed the question.

  Thanks for your help!

• Measurement Studio 2010 with Visual c# Express 2010

  I don't know if this is supported, however, I get this error when you try to install the Measurement Studio 2010 Visual Studio integration.

  2 error: Cannot perform action Measurement Studio Visual Studio 2010 integration configuration.

  I can select the VS c# Express items in my screenshot. But they do not appear in my Inbox tool for me to use...

  Can some help me please? I'm new to all this...

  Visual Studio Express Editions of Microsoft Visual Studio do not support the Measurement Studio integrated tools. Controls support Measurement Studio for Visual Studio Express Editions KB.

• IME for version 6.0 of the IPS

  Hi, iam using the module AIP-SSM-10 in ASA 5510.

  my version of the ips is: 6.0 (6) and I want to use ips manager express (IME). I tried with version 6.1.1 and 7.0.2 IME, but both are not supported for the current version of ips.

  1. Please tell me which IME support for ips 6.0 (6) version.

  2. how to level my ips 6.0 version to the current version or higher.

  Please send me url links.

  1. the EMI version 7.0.2 supports IPS version 6.0.6 according file following IME 7.0.2 Readme:

  http://www.Cisco.com/Web/software/282829584/28797/IME-7.0-2.Readme.txt

  Only the new features of the EMI, including monitoring console, dashboard and integrated configuration, health are supported only on the sensors running IPS version 6.1 or later. However, all the other features on IPS 6.0.6 is supported on IME 7.0.2.

  2. you can update the IP addresses directly to version 7.0.2 (E4) using the upgrade package: IPS-K9-7, 0-2 - E4.pkg

  Hope that helps.

• Its results are not redirect to the respective pages

  
  Hi all

  I configured ITS Peoplesoft peopletools 8.53 and ELM 9.2 instance.

  After you have everything configured, ITS search results arrive correctly but is you click on it, it is not redirecting to the respective pages.

  This is to show the error on the page in the status bar of Internet Explore.

  Could you please help me to solve the problem.

  Thanks in advance.

  AJMAL

  Hello

  Probably you are encountering the problem that is described in this document of knowledge "My Oracle Support":

  Doc # 1551951.1: Search 'Results list' contains links that do not work because they are built with the incorrect URL

  Here is the solution:

  ------------------------

  Make sure that the content/portal URI are set correctly on all nodes the.  This can be done as follows:

  1. connect to the PeopleSoft application

  2. go to PeopleTools Integration Broker, integration configuration, nodes

  3. sort by "Local node".

  4. for any node where "node Local = 1' do the following:

  a. set up the node

  b. go to the tab "portal."

  c. ensure that the text "URI Content" and "Portal URI text" are properly defined.

  For example, if your Integration Broker is on myserver.mycompany.com:8000 and your site is called hcm, you would use these values:

  Text of the URI of the content = "http://myserver.mycompany.com:8000/PSC/hcm /"

  Portal of text URI = "http://myserver.mycompany.com:8000/psp/hcm /"

  (Write it down "/" at the end of the values.) Make sure you remember that)

  d. make sure this change is made to all nodes. For example, for HCM, this aspect should be defined for nodes PSFT_HR and HRMS.

  5. after making the above changes, you need to rebuild the search index. Do this as follows:

  a. redeploy all the definitions of research that were built with the incorrect URL as follows:

  -Go to PeopleTools, research framework, Administration, deployment/delete the object

  -Box next to the definition of inactive research

  -Click "undeploy".

  -Once finished, check the box next to the definition of research and this time click "deploy".

  b. rebuild search indexes

  -Go to PeopleTools, research, Administration, research agenda Index

  -Bring the command run to perform a build of the full Index and launch it.

  c. Once finished the process ' Building for Search Index ', re - test and verify that the problem is solved.

• Dell order and integration Suite for System Center Configuration manager 4.0

  Hello

  I just installed the Dell order and SCCM integration suite.

  When you try to import a driver cab file to create a driver package, I get an error saying that the software could not recover present distribution points in the server.

  I tried to install the suite actually on a distribution point, but got the same thing.

  Any ideas?

  Thank you

  Close the Configuration Manager console.  Then re-open it by right-clicking the icon and select run as administrator.

• vCOPS integration with vCenter Configuration Manager

  Hello

  I have a problem with the integration with vCenter Configuration Manager vCOPS.

  When I try to save vCCM in vCOPS prividing on 100% correct settings, I get an error:

  Cannot save vCenter Configuration Manager system: Details: unable to connect to the instance of VCM target.

  In fact I don't know yet where to look for more information about the error.

  Kind regards

  Sebastian

  I posted some information on this point - is useful.

  StorageGumbo: VCM server registration for Ops VAPP 5.6 vC

• configuration of the integration broker

  could someone please help me understand how to configure integration broker between two peoplesoft applications and how it works?

  If you look at the peoplebooks bound Nicolas I think there it details well enough, but here are some things to consider in my experience and how I could explain it to someone... it's maybe not as technically correct as it should, but is more designed to help you understand the concepts.

  Think of remote nodes like "destination definitions."
  Think bridges as a "gateway to a destination.
  Think as the gateways connectors is the code for 'to connect to the destination.

  Then starting at the top...
  A service operation of East message we want to send from Point A to Point B
  the service operation has a routing... Which destinations it comes, goes and his leadership. for example, these are configured by setting the routing from the node A to node B, out . Node B is a remote node. Without him, how else tell us the system where to send the message. It is remote, because it is an external system.

  Because the methods of connection or connectors are programmed at the level of the Bridge , we associate the node with a gateway and a Connector on the connectors of the node definition page tab. In peoplesoft for peoplesoft, we use the PSFTTARGET connector that can be defined on either a local or a remote Gateway.

  the best way for me to help you differentiate the gateways remote vs local is to think of bridges like this. A local gateway can be a bridge whose local node of this particular PeopleSoft system defined in him and whose configuration of the appropriate connectivity (he knows how to deliver incoming messages directly to our application server processes). A remote gateway is one that does not have the local node specified in its files gateway.properties and therefor can not connect to us directly. It may be behind a firewall to another place, but a local node of the destination set and is the local gateway for this destination system.

  On a side note, changing the type of Connector changes how we configure things.
  Connector PSFTTARGET to ensure that the node is referenced in the gateway.properties file.
  for a HTTPTARGET connector put us nothing in the file gateway.properties, instead, the connector on the node tab will allow us to specify a URL it is recorded in the database on the definition of the node.

  We have the remote nodes to define our destination point
  our node needs a gateway because it is where the connectors
  the connector is programming for managing this type of connection selected (you can write your own connector, there is a developer for him kit)
  and an entry door can be local or remote to a PeopleSoft system based on nodes who knows the bridge itself.

• setenv OTF file Configure Tomcat environment settings to serve as an integrator

  In Installation guide under installing Integrator Tomcat server its cities that we need create a setenv file and configure the settings memory Tomcat adapted to our needs.
  
  I created a setevn.sh file that has under content:
  
  Export JAVA_OPTS = "- server - Xmx512m".
  
  I got the content above of glasses.
  
  It will be great if someone can explain to me what is this file and which specifies the content of this file.
  
  Thank you very much.
  
  Kind regards
  Amrit

  The option - Xmx defines the maximum memory size of the Java heap for the Tomcat process running Integrator Server. If you look below you, you should increase this value higher than 512 m (.5 GB) in order to run integrator in Server mode graphics. The Setup Guide for the Integrator Server recommend a minimum of 1 G (1024 m) but, if you have more memory, you should be put higher:

  http://docs.Oracle.com/CD/E35976_01/General.240/eid_install/TOC.htm#Tomcat%20configuration%20recommendations

  If your size is too small, Tomcat (which hosts the Integrator server) will run out of memory during the processing of your data.

  HTH,

  Patrick Rafferty
  http://branchbird.com

• How to configure Integration Broker Quick Setup 'Domain' section?

  People,
  
  Hello. I just started to configure Integration Broker to use the Web Service. In PeopleTool-> Quick Integration Broker Configuration page, I type Gateway URL and ping Bridge, it runs successfully.
  
  But we have to type in the name of the computer in the section 'Domain', 'localhost' and the path to the Application Server. I click anywhere in this section but no place can be typed in values. Any folk that understand how to set "Integration Broker Configuration quick page Section area?
  
  Thank you.

  If you publish/subscribe servers configured on your application server domain, then it automatically fills the field page. If you have 2 running of pub/sub domains you can choose that one activates and the other can be inactive.

  After your domain status and URL of gateway, u might want to goto advanced gateway properties page and write the name of your application server and the port of Jolt on which it will run. u need a PSIB (PeopleSoft Integration Broker) account with the password. It is also used on your local node authentication type.

  Please update the request if you need assistance. Thank you!

• The volume control works only when configuring integration HotKey is on...

  I'm not VERY good at the computer...

  But, my volume keys worked very well until I had to reboot my computer. After that, it stopped working. I tried to install integration HotKey. The sound would work when the screen is in place. When you exit the installation screen of and that I restart my computer, it doesn't work anymore. I also tried updating my audio drivers, but it does not help.

  What should I do?

  I have fixed this problem myself! I've updated several times and got through. Thank you!

• E1200 V2 with no 'Internet strategy' in the configuration of the integrated webmail

  I just bought a refurbished factory E1200.  The label beneath says that it is a Version 2 template.  When I bought it, it was loaded with 2.0.02 firmware but I have updated the firmware to 2.0.04

  My problem is that I try to install MAC restrictions based on the addresses through the Setup program based on the manual/web and when I click on the "Access Restrictions" tab, I have that simple "Parental control" and advanced "Internet political access."

  Is it possible that I have a mislabeled the V1?  If this is the case, how is it that I was able to update the firmware using the firmware of the V2 downloads section.

  V do! and V2 units use the same firmware, but more importantly, how to spend the integrated software while I advanced commands of "Internet access policy?

  Thank you!

  Eric

  Hello

  The E1200 V2 comes with version 2.0.02 or original 2.0.1 firmware and the two support internet access policy, unfortunately, the new firmware (2.0.04) does not support this feature and leaves you alone with parental controls.

  Your router is not listed and it is not defective, so do not change, it's just a firmware issue, I recommend you contact your country support team and ask them for a downgrade of firmware to the previous version (2.0.02).

  I hope this helps...

  Chehab