DMZ-Link bandwidth does not change the routing table countin traffic
Hey guys
I'm INE laboratories dong and shoved a weird one that delivers.
I have configured the dmz-link bandwidtha nd the extended communities to send, I get the bandwidth in the BGP routes, however the routing table does not change the proportion of traffic according to the bandwidth available link.
Here is my configuration:
Rack1R6 (config) #do sh run | dry BGP
router bgp 100
no synchronization
The log-neighbor BGP-changes
BGP dmzlink-bw
155.1.146.0 netmask 255.255.255.0
aggregate-address 155.1.0.0 255.255.0.0 summary only
neighbour 54.1.1.254 distance-54
neighbor 54.1.1.254 dmzlink-bw
neighbour 155.1.67.7 distance-300
neighbour 155.1.146.1 distance-100
155.1.146.1 neighbor send-community times
No Auto-resume
Rack1R6 (config) #.
Rack1R6 (config) #do sh ip bgp neigh 155.1.146.1 opponents
Version of BGP table is 35, local router ID is 150.1.6.6
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* > 28.119.16.0/24 54.1.1.254 0 54 I
* > 28.119.17.0/24 54.1.1.254 0 54 I
* > 112.0.0.0 54.1.1.254 0 0 54 50 60 I
* > 113.0.0.0 54.1.1.254 0 0 54 50 60 I
* > 114.0.0.0 54.1.1.254 0 0 54 I
* > 115.0.0.0 54.1.1.254 0 0 54 I
* > 116.0.0.0 54.1.1.254 0 0 54 I
* > 117.0.0.0 54.1.1.254 0 0 54 I
* > 118.0.0.0 54.1.1.254 0 0 54 I
* > 119.0.0.0 54.1.1.254 0 0 54 I
r > 155.1.0.0 0.0.0.0 32768 I
Rack1R6 (config) #do sh ip bgp
Version of BGP table is 35, local router ID is 150.1.6.6
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* i28.119.16.0/24 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 54 i
* i28.119.17.0/24 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 54 i
* i112.0.0.0 204.12.1.254 0 100 0 54 50 60 I
* > 0 0 54 50 60 54.1.1.254 I
* i113.0.0.0 204.12.1.254 0 100 0 54 50 60 I
* > 0 0 54 50 60 54.1.1.254 I
* i114.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i115.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i116.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i117.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i118.0.0.0 204.12.1.254 0 100 0 54 I
Network Next Hop path metrics LocPrf weight
*> 54.1.1.254 0 0 54 i
* i119.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
r i155.1.0.0 155.1.146.4 0 100 0 I
r> 0.0.0.0 32768 i
s > 155.1.146.0/24 0.0.0.0 32768 0 I
* > i205.90.31.0 155.1.13.3 0 100 0 200 254?
* 155.1.67.7 0 300 200 254?
* > i220.20.3.0 155.1.13.3 0 100 0 200 254?
* 155.1.67.7 0 300 200 254?
* > i222.22.2.0 155.1.13.3 0 100 0 200 254?
* 155.1.67.7 0 300 200 254?
Rack1R6 (config) #.
# now R4 configuration
Rack1R4 (config) #do sh run | dry BGP
router bgp 100
no synchronization
The log-neighbor BGP-changes
BGP dmzlink-bw
155.1.146.0 netmask 255.255.255.0
aggregate-address 155.1.0.0 255.255.0.0 summary only
neighbour 155.1.45.5 distance-200
155.1.45.5 route-neighbour card GAME-54 on
neighbour 155.1.146.1 distance-100
155.1.146.1 neighbor send-community times
neighbour 204.12.1.254 distance-54
neighbor 204.12.1.254 dmzlink-bw
No Auto-resume
Rack1R4 (config) #.
Rack1R4 (config) #do sh ip bgp Synt.
Local router BGP 150.1.4.4 identifier UNDER number 100
BGP table version is 18, table 18 main routing version
15 entries for network using 1980 bytes of memory
18 entries for path using 936 bytes of memory
9/7 BGP path/bestpath attribute entered using 1512 bytes of memory
3 entries for BGP AS-path ACCESS using 72 bytes of memory
1 entries PMO community, using 24 bytes of memory
0 cache entries of BGP route-map with 0 bytes of memory
0 cache entries of filter-list BGP using 0 bytes of memory
Bit entries in the cache field: 3 courses (up to 5) with 96 bytes of memory
BGP using 4620 total number of bytes of memory
Activity 102/87 BGP prefixes, 243/225, scan interval to 60 seconds
Neighbor MsgRcvd MsgSent V AS TblVer InQ OutQ Up/Down State/PfxRcd
155.1.45.5 4 200 8615 8640 18 0 0 07:38:02 3
155.1.146.1 4 100 8761 8668 18 0 0 00:14:34 3
204.12.1.254 4 54 8724 8595 18 0 0 07:38:02 10
Rack1R4 (config) #do sh ip bgp
BGP table version is 18, local router ID is 150.1.4.4
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* > 28.119.16.0/24 204.12.1.254 0 0 54 I
* > 28.119.17.0/24 204.12.1.254 0 0 54 I
* > 112.0.0.0 204.12.1.254 0 54 50 60 I
* > 113.0.0.0 204.12.1.254 0 54 50 60 I
* > 114.0.0.0 204.12.1.254 0 54 I
* > 115.0.0.0 204.12.1.254 0 54 I
* > 116.0.0.0 204.12.1.254 0 54 I
* > 117.0.0.0 204.12.1.254 0 54 I
* > 118.0.0.0 204.12.1.254 0 54 I
* > 119.0.0.0 204.12.1.254 0 54 I
* > 155.1.0.0 0.0.0.0 32768 I
s > 155.1.146.0/24 0.0.0.0 32768 0 I
* i205.90.31.0 155.1.13.3 0 100 0 200 254?
*> 155.1.45.5 0 200 254 ?
* i220.20.3.0 155.1.13.3 0 100 0 200 254?
*> 155.1.45.5 0 200 254 ?
* i222.22.2.0 155.1.13.3 0 100 0 200 254?
Network Next Hop path metrics LocPrf weight
*> 155.1.45.5 0 200 254 ?
Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents
Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents
BGP table version is 18, local router ID is 150.1.4.4
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* > 28.119.16.0/24 204.12.1.254 0 0 54 I
* > 28.119.17.0/24 204.12.1.254 0 0 54 I
* > 112.0.0.0 204.12.1.254 0 54 50 60 I
* > 113.0.0.0 204.12.1.254 0 54 50 60 I
* > 114.0.0.0 204.12.1.254 0 54 I
* > 115.0.0.0 204.12.1.254 0 54 I
* > 116.0.0.0 204.12.1.254 0 54 I
* > 117.0.0.0 204.12.1.254 0 54 I
* > 118.0.0.0 204.12.1.254 0 54 I
* > 119.0.0.0 204.12.1.254 0 54 I
* > 155.1.0.0 0.0.0.0 32768 I
* > 205.90.31.0 155.1.45.5 0 200 254?
* > 220.20.3.0 155.1.45.5 0 200 254?
* > 222.22.2.0 155.1.45.5 0 200 254?
Total number of prefixes 14
Rack1R4 (config) #.
# and where is the real problem, R1
Rack1R1(config-Router) #do sh ip bgp
Version of BGP table is 15, local router ID is 150.1.1.1
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* i28.119.16.0/24 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i28.119.17.0/24 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i112.0.0.0 54.1.1.254 0 100 0 54 50 60 I
* > I 204.12.1.254 0 100 0 54 50 60 I
* i113.0.0.0 54.1.1.254 0 100 0 54 50 60 I
* > I 204.12.1.254 0 100 0 54 50 60 I
* i114.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i115.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i116.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i117.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i118.0.0.0 54.1.1.254 0 100 0 54 I
Network Next Hop path metrics LocPrf weight
* > I 204.12.1.254 0 100 0 54 I
* i119.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i155.1.0.0 155.1.146.6 0 100 0 I
* > I 155.1.146.4 0 100 0 I
* > 205.90.31.0 155.1.13.3 0 200 254?
* i 155.1.45.5 0 100 0 200 254?
* > 220.20.3.0 155.1.13.3 0 200 254?
* i 155.1.45.5 0 100 0 200 254?
* > 222.22.2.0 155.1.13.3 0 200 254?
* i 155.1.45.5 0 100 0 200 254?
Rack1R1 (config - Router) # do sh ip bgp 112.0.0.0
112.0.0.0/8, version 4 BGP routing table entry
Paths: (2 available, best #2, table by default-IP-Routing-Table)
MPIO: eBGP iBGP
Announced for the update-groups:
1 2
54 50 60, (from a customer-RR)
54.1.1.254 (metric 2560002816) of 155.1.146.6 (150.1.6.6)
Origin, IGP, 0, 100, valid, internal multipath localpref metric.
DMZ-Link Bw 250 KB
54 50 60, (from a customer-RR)
204.12.1.254 (metric 2560002816) of 155.1.146.4 (150.1.4.4)
Origin, IGP, metric 0, localpref 100, valid, internal, multipath, best
DMZ-Link Bw 12500 KB
Rack1R1(config-Router) #do sh ip route 112.0.0.0
Routing for 112.0.0.0/8 entry
Known through 'bgp 100', 200, 0 distance metric
54, internal type tag
Last update of 204.12.1.254 ago 00:15:30
Routing descriptor blocks:
204.12.1.254, 155.1.146.4, there is 00:15:30
Path metric is 0, number of shares of traffic 1
AS hop 3
Beacon road 54
* 54.1.1.254, 155.1.146.6, there is 00:15:30
Path metric is 0, number of shares of traffic 1
AS hop 3
Beacon road 54
Rack1R1 (config - Router) #.
as you can see, the BGP process in R1 receives the correct link DMZ bw but not indeed take...
can you please help me if I makeover anything in my setup?
Hello
Can you please make sure you have a value of bandwidth on ALL your BGP peering physical interfaces? And you can also include the running-config 'router bgp XXXX' out of R1 as you have not understood what we (others are). Just to make sure that you have "bgp dmzlink-bw' configured on all peerings and overall in the process - it will still show in the output of the same community if it does not work on it.
Tags: Cisco Network
Similar Questions
-
Does not change the language when I change my preference-applications-Applanguage on creative cloud. No way to get around?
It is important to Swedish to English in the case.
Thank you!Please, try the following steps:
- Uninstall Adobe CC (Creative Cloud help |) Uninstall the creative Office Cloud app)
- Reboot the computer.
- Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop
-
map does not show the routes and directions
This feature is not yet supported in India.
http://www.Apple.com/in/iOS/feature-availability/#maps-directions
In addition, your phone may be overheating for a number of reasons. The most common of which is low service area.
Your attributes from battery to the majority of the production of heat, then adjust settings to put less load on the farm in general will help some.
-
Satellite Pro P300 - Fn + f5 combination does not change the monitor
On two laptops of P300, we have a problem that the fn + f5 combination does not change the layout of the monitor.
If you press fn + f5, you see the bar where the different modes are displayed, but if you release the layout remains the same (laptop as a single monitor)
Thank you, best regards,.
Davy
Hello
In my opinion the previous action (installation of the catalyst hotkeys and reinstalled the hotkey driver) is the reason why the FN + F5 does not work properly.
In my opinion, you should clean the registry first.
Use CCleaner. It s free and cleans up the registry.
In addition, you must remove the catalyst shortcut keys because this may affect the Toshiba FN Hotkey feature.
Finally, install the Toshiba drivers from the Toshiba page
More info (right on the Toshiba driver page), you will find details on the tools simple and drivers and what are they for... -
Why an amplification of the RAM does not change the index performnance of windows vista?
Why an amplification of the RAM does not change the index performnance of windows Vista?
Hello
I m not very well, but maybe you have more than 3 GB of RAM and Vista 32 bit.
Usually the 32 bit OS is capable to manage and send only 3.2 GB.
The more than 3.2 GB RAM will not operating system used and therefore would not increase the index
In addition the laptop will be not really faster after upgrading RAM. You will notice better performance using applications at the same time, but this does not affect the index of Vista.
But this is only my personal hypothesis.Welcome them
-
Insert a new CD does not change the last torn CD
WMP 11 XP SP3 does not change the info of CD in the RIP, a new CD of screening. WMP 11 found no new updates when updates has been requested. If I close WMP 11 and reopen WMP11 new info of the CD are correct. It must be a problem of buffer information.
If you start XP in clean boot mode, the same problem occurs there?
In addition, please check if the problem occurs on other users accounts, by creating a new user account in the Control Panel, by logging into that account and trying it.
Tim Baets
http://www.BM-productions.TK -
getPreferredHeight does not change the height of a LabelField.
Hello
I add LabelFields at a screen. I replaced getPreferredWidth and the LabelField getPreferredHeight. GetPreferredHeight however does not change the height of LabelField.
getPreferredWidth seems to work very well.
I do not use the default vertical Manager that comes with the screen.
Ideas/pointers in troubleshooting this would be greatly appreciated.
-MO.
Hello
to change dimensions on a field, you must override the method of layout.
protected final void layout(final int width, final int height) { int yourHeight = super.getFont() * 2; super.setExtent(width, yourHeight); }
If you want the label is centered vertically, you must override the paint method.
-
After the upgrade to 6, security server does not change the listening Port
Came across a weird situation where after upgrading a server security 6.1.0 - 2509221, it does not change the listening SSL port during the upgrade, it was not on the standard SSL port.
It was initially configured to listen on 444 before the upgrade, after the upgrade, I tried to go back to 443 and a netstat-ban shows that it is listening on port 444.
I double checked the config.properties file and there is no entry for serverPort, and configuration shows 443 in the admin View handler.
-Re-apply the configuration via the web page does no change, always tuned to 444.
-Don't restart the service of security server no change, still plays on 444.
-Restart of the server, no change, still plays on 444.
-Statically placed serverPort = 443 in the config.properties, always tuned to 444.
All ports are verified open, 443, 444 and so I think I could have hit a bug. Someone else has security servers that listen on non-standard ports SSL?
A complete reinstallation of the Security server is provided, changing the port to listen 443, shouldn't have to do that well.
You checked config.properties, but did you check in locked.properties for the port setting see if it's been moved there before and during the upgrade? Locked.Properties replaces all the configuration settings.
-
Importing APEX app with PL/SQL does not change the id as requested app
Oracle DB XE 11 GR 1 material
APEX 4.2.2
RHEL 6.3
------------------
The following code segment any an APEX application which has been exported successfully. However, even when given a 'new' id of the application, the 'old' within the export application id is still used.
What could be wrong? In other words, how can I make sure that the 'new' id of the application is used and it overrides the 'old' id of the application that comes with the APEX app export file?
declare...
wwv_flow_api.set_security_group_id (p_security_group_id = > v_secgrp_id);
apex_application_install.set_application_id (t_new_app); # does not change the new app app ID id
....
exception
while others
.....
end;
/@APEX_export.sql;
commit;
Thank you.
It turns out that the code above (6) works very well. My development environment has a problem with the workspace is not found. Tried the code in a test environment and it worked.
Thank you.
-
Why Muse does not change the names of certain images or property when exporting to HTML format? and how can I keep the integrity of the name that the image/file has been saved as?
General Muse renames a file imported image if the image is modified to achieve the design or the exit, or if the name change was necessary due to a name conflict (two different images which had the same file name when importing).
The design-time features that will modify an image include cropping, rotation, rounded corners and effects (drop shadow, bevel or glow). It is also true that, in rare cases, Muse will merge an image with other content to optimize page download performance. An example of this would be to place a background image on a block of text that contains the text using system fonts. In this case, rather than a single image for text output and a separate image for the background, Muse will combine the two into a single image.
If an image is placed or imported by Muse and not tampered with, the image is crossed without modification (including the file name) at export/publish (with him except that Muse will always rename if two different images with the same name).
-
Access policy does not change the status of resource
I have a set access policy to assign a role and a resource to anyone in a specific group. The policy work very well for those who have never had the resource before. For people who were in a disabled state resource - access policy is to add the role, but it does not change the State of the resource from disabled to enabled (or put into service).
How can I do so it adds not only the role, but he changes the State of the handicapped resource? Thanks in advance.Simple!
-Create an adapter of the entity during the prior insertion of the Members Group.Group of the user who will be called on the user being part of the group. Add custom java code that will check the resource assigned to this user and confirm if its there and in a disabled state. If its disabled and then turn it back on, otherwise just hang on and do nothing.
Thank you
Sunny
-
When I visit a site rarely the color of the link changes to the color I chose. even if it does not change, it is color not visited in a day or two.
Hello.
What is happening (very probably) because Firefox is not store your history navigation for long, or at all. Go to tools > Options > privacy and if ensure that configurations are defined as you want to be. If they are, it is likely that you have some security software that is to clear the history of your Firefox (and possible other browsers have installed). The likely suspects are the antivirus, firewalls, and the suites of security, but utilities such as CCleaner cleaning are also able to clean up Firefox browsing history and other personal data. Make sure that you have configured them to do this.
I must remind you, however, that some sites (they are rare, although) don't have not their links change color when it is visited. This happens only when their authors report deliberately does not change colors. You can force Web sites to use a color scheme of your choice by going to tools > Options > content > colors... and uncheck 'allow pages to choose their own colors ". You can also configure the color scheme on this screen.
I hope this helps.
-
Link color does not change after you click in Firefox for Android.
Why the link I click does not change its color in Firefox for Android from blue to purple?
Depends on the specificity of the site you click on links on.
-
Bug? -commandLink does not change the selection of lines in 11.1.2
In 11.1.1.3 jdeveloper with ADF BC, a read-only table ADF with the selection of simple lines and commandLink in one of the columns will cause the selection of rows to change when the link is selected. In 11.1.2 line selection does not change when the link is selected. Is this a bug or a new feature of 11.1.2? Is it possible to behave as in 11.1.1.3?
Thank you
Bobwork around: http://blogs.oracle.com/jdevotnharvest/entry/jdeveloper_11_1_2_command
Frank
-
Dreamweaver CS4: change/rename a .flv - does not change the script code
Hi all
I do some changes to a site that does everything at the time using CS3. The site has many, many pages that have embedded .flv files. All these files have been updated with new videos, so now that I have to go back and change the links for them all. I'm used to be able to click on the placeholder of the flash on the page and then edit the file link in the Properties window. Now, it seems that in CS4 when you change the name of the file in this window it only changes the file name in the section object of noscript code but it does not change in the AC_FL_RunContent in the code section. Me missing something, there was a preference setting in DW I missed somewhere that would make two references to a multimedia file will change when it changes in the Properties window?Thank you
ChrisHello
CS4 uses different code to insert flv as CS3, which is probably why it does not recognize and replace the old code.
This means that you probably need to re - insert the FLV into your pages using the insert in CS4 for this option Update automatically on rename.
PZ
Maybe you are looking for
-
On Wikipedia, "Firefox Sync",1 page it says: Firefox Sync, originally branded Mozilla Weave, is a sync of browser feature that allows users to synchronize bookmarks, partially browsing history, preferences, passwords, filled forms, Add - ons, and the
-
Firefox blocks access on port 21 on my FTP server. How to remove the block?
FireFox crashes me access to my FTP server at home on port 21. There must be a relatively simple way to remove this block. Where and how can I remove it?
-
Pavilion laptop - 15-ab262nr: HP 3D DriveGuard and Coolsense software does not install
Reinstalled Windows 10 on this PC laptop shortly after purchase (clean install to remove all the bloating) and Software HP Coolsense and DriveGuard will not install. After having downloaded DriveGuard and try to run the installer, nothing happens, so
-
Hi all I have some very large data files that I work with (50,000 lines) and I would like to cut these to a more manageable size by copying the alternated line or every 5th in a new file. Maybe Labview is not the best option for this but so far I've
-
How can I fix a screen stretched?
A couple of months ago (spring 2011) my screen went suddenly stretched horizontally (or compressed vertically, if you prefer). How should I do? Please be as simple as possible.