DNS PLEASE HELP problem

Computer using a modem motorola (wired)
Modem Motorola surfboard cable (SB5101)
Cable internet connection

PROBLEM: "Windows cannot communicate with the device or resource (primary DNS server).
The modem and the conection work very well on other computers


I have tried these things:

-ipconfig/release and ipconfig/renew
-J' have reset TCP/IP settings using the instructions on the site microsoft.com (netsh int ip reset resetlog.txt)
-Reset the modem.
-Full scan with malawarebytes and security essensials
Uninstall/reinstall the network card

Txt FILE RESULTS

MiniToolBox by Farbar Version: 11/06/2012
Run by Jairo (Administrator) 11/06/2012-13:01:15
Microsoft Windows 7 Enterprise Service Pack 1 (X 64)
Boot Mode: Normal
***************************************************************************

========================= IE Proxy Settings: ==============================

Proxy is not enabled.
No Proxy Server is defined.
========================= Hosts content: =================================

========================= IP Configuration: ================================

Realtek PCIe GBE Family Controller = connection to the LAN (connected)

# ----------------------------------
# IPv4 Configuration
# ----------------------------------
pushd interface ipv4

reset
the value overall icmpredirects = activated

popd
# End of IPv4 configuration

Windows IP configuration

Name of the host...: Jairo-PC
Primary Dns suffix...:
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.
... DNS suffix search list: amnet.co.cr

Ethernet connection to the Local network card:

The connection-specific DNS suffix. : amnet.co.cr
Description...: Realtek PCIe GBE Family Controller
Physical address.... : F4-6D-04-8D-FD-2D
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Address IPv6 local link...: fe80::811b:30df:fa4a:6 has 55% 18 (Preferred)
IPv4 address...: 186.32.168.174 (Preferred)
... Subnet mask: 255.255.255.0.
Lease obtained...: Tuesday, November 6, 2012 12:38:50
End of the lease...: Wednesday, November 7, 2012 12:38:50
... Default gateway. : 186.32.168.1.
DHCP server...: 192.168.10.25
DHCPv6 IOOKING...: 318008580
DHCPv6 DUID customer...: 00-01-00-01-15-39-F1-7D-F4-6D-04-8D-FD-2D
DNS servers...: 186.32.0.99
186.177.16.220
NetBIOS over TCP/IP...: enabled

Tunnel adapter ISATAP.amnet.co.CR:

State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Microsoft ISATAP adapter
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes

Card tunnel Local Area Connection * 9:

State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Microsoft Teredo Tunneling adapter
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes

Card adapt 6TO4 tunnel:

State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Microsoft 6to4 card
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes
DNS request timed out.
wait time was 2 seconds.
Server: unknown
Address: 186.32.0.99

DNS request timed out.
wait time was 2 seconds.
DNS request timed out.
wait time was 2 seconds.
DNS request timed out.
wait time was 2 seconds.
DNS request timed out.
wait time was 2 seconds.
Ping request could not find host google.com. Please check the name and try again.
DNS request timed out.
wait time was 2 seconds.
Server: unknown
Address: 186.32.0.99

DNS request timed out.
wait time was 2 seconds.
DNS request timed out.
wait time was 2 seconds.
DNS request timed out.
wait time was 2 seconds.
DNS request timed out.
wait time was 2 seconds.
Ping request could not find host yahoo.com. Please check the name and try again.
DNS request timed out.
wait time was 2 seconds.
Server: unknown
Address: 186.32.0.99

DNS request timed out.
wait time was 2 seconds.
DNS request timed out.
wait time was 2 seconds.
DNS request timed out.
wait time was 2 seconds.
DNS request timed out.
wait time was 2 seconds.
Ping request could not find host bleepingcomputer.com. Please check the name and try again.

Ping 127.0.0.1 with 32 bytes of data:
Reply from 127.0.0.1: bytes = 32 time = 1ms TTL = 128
Reply from 127.0.0.1: bytes = 32 time = 1ms TTL = 128

Ping statistics for 127.0.0.1:
Packets: Sent = 2, received = 2, lost = 0 (0% loss),
Time approximate round trip in milli-seconds:
Minimum = 1ms, Maximum = 1ms, average = 1ms
===========================================================================
List of the interface
18... f4 6 04 8 d d fd 2d... Realtek PCIe GBE Family Controller
1... software Loopback Interface 1
13 00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter
11.. 00 00 00 00 00 00 00 e0 Microsoft Teredo Tunneling adapter
12.. 00 00 00 00 00 00 00 e0 Map Microsoft 6to4
===========================================================================

IPv4 routing table
===========================================================================
Active routes:
Network Destination gateway metric Interface subnet mask
0.0.0.0 0.0.0.0 186.32.168.1 186.32.168.174 20
127.0.0.0 255.0.0.0 127.0.0.1 on route 306
127.0.0.1 255.255.255.255 127.0.0.1 on route 306
127.255.255.255 255.255.255.255 on-link 127.0.0.1 306
186.32.168.0 255.255.255.0 on a 186.32.168.174 route 276
186.32.168.174 255.255.255.255 on a 186.32.168.174 route 276
186.32.168.255 255.255.255.255 on a 186.32.168.174 route 276
224.0.0.0 240.0.0.0 on-link 127.0.0.1 306
224.0.0.0 240.0.0.0 on a 186.32.168.174 route 276
255.255.255.255 255.255.255.255 on-link 127.0.0.1 306
255.255.255.255 255.255.255.255 on a 186.32.168.174 route 276
===========================================================================
Persistent routes:
None

IPv6 routing table
===========================================================================
Active routes:
If metric network Destination Gateway
1 306: 1/128 liaison
18 276 fe80: / 64 On-link
FE80::811b:30df:fa4a:6 has 55 18 276 / 128
Over a link
1 306 ff00: / 8 On-link
18 276 ff00: / 8 On-link
===========================================================================
Persistent routes:
None

========================= Event log errors: ===============================

Application errors:
==================
Error: (06/11/2012 12:40:07) (Source: WinMgmt) (user :)
Description: //./root/CIMV2SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 990 x 80041003

Error: (06/11/2012 12:38:23) (Source: KMService) (user :)
Description: WinServ (CreateProcess) error: the system cannot find the specified file.
(2)

Error: (06/11/2012 12:20:59) (Source: WinMgmt) (user :)
Description: //./root/CIMV2SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 990 x 80041003

Error: (06/11/2012 12:19:19) (Source: Microsoft-Windows-CAPI2) (user :)
Description: Extracted failure of third-party root list from auto update cab at: with error: a required certificate is not in its validity period when verifying against the current system clock or the timestamp in the signed file.
.

Error: (06/11/2012 12:19:16) (Source: KMService) (user :)
Description: WinServ (CreateProcess) error: the system cannot find the specified file.
(2)

Error: (06/11/2012 12:12:40) (Source: WinMgmt) (user :)
Description: //./root/CIMV2SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 990 x 80041003

Error: (06/11/2012 12:11:02) (Source: Microsoft-Windows-CAPI2) (user :)
Description: Extracted failure of third-party root list from auto update cab at: with error: a required certificate is not in its validity period when verifying against the current system clock or the timestamp in the signed file.
.

Error: (06/11/2012 12:11) (Source: KMService) (user :)
Description: WinServ (CreateProcess) error: the system cannot find the specified file.
(2)

Error: (06/11/2012 11:57:25) (Source: WinMgmt) (user :)
Description: //./root/CIMV2SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 990 x 80041003

Error: (06/11/2012 11:55:46) (Source: Microsoft-Windows-CAPI2) (user :)
Description: Extracted failure of third-party root list from auto update cab at: with error: a required certificate is not in its validity period when verifying against the current system clock or the timestamp in the signed file.
.

System errors:
=============
Error: (06/11/2012 12:38:36) (Source: Microsoft Antimalware) (user :)
Description: % 860 real-time Protection feature has encountered an error and does not.

Feature: % 835

Error code: 0x80004005

Error description: unspecified error

Reason: % 842

Error: (06/11/2012 12:19:27) (Source: Microsoft Antimalware) (user :)
Description: % 860 real-time Protection feature has encountered an error and does not.

Feature: % 835

Error code: 0x80004005

Error description: unspecified error

Reason: % 842

Error: (06/11/2012 12:11:11) (Source: Microsoft Antimalware) (user :)
Description: % 860 real-time Protection feature has encountered an error and does not.

Feature: % 835

Error code: 0x80004005

Error description: unspecified error

Reason: % 842

Error: (06/11/2012 12:09:19) (Source: Service Control Manager) (user :)
Description: The computer browser service depends on the Server service which failed to start because of the following error:
% 1068

Error: (06/11/2012 12:09:19) (Source: Service Control Manager) (user :)
Description: The computer browser service depends on the Server service which failed to start because of the following error:
% 1068

Error: (06/11/2012 12:09:19) (Source: Service Control Manager) (user :)
Description: The computer browser service depends on the Server service which failed to start because of the following error:
% 1068

Error: (06/11/2012 12:09:06) (Source: Service Control Manager) (user :)
Description: The computer browser service depends on the Server service which failed to start because of the following error:
% 1068

Error: (06/11/2012 12:09:06) (Source: Service Control Manager) (user :)
Description: The computer browser service depends on the Server service which failed to start because of the following error:
% 1068

Error: (06/11/2012 12:09:06) (Source: Service Control Manager) (user :)
Description: The computer browser service depends on the Server service which failed to start because of the following error:
% 1068

Error: (06/11/2012 12:09:06) (Source: Service Control Manager) (user :)
Description: The computer browser service depends on the Server service which failed to start because of the following error:
% 1068

Sessions of Microsoft Office:
=========================
Error: (06/11/2012 12:40:07) (Source: WinMgmt)(User:))
Description: //./root/CIMV2SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 990 x 80041003

Error: (06/11/2012 12:38:23) (Source: KMService)(User:))
Description: WinServ (CreateProcess) error: the system cannot find the specified file.
(2)

Error: (06/11/2012 12:20:59) (Source: WinMgmt)(User:))
Description: //./root/CIMV2SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 990 x 80041003

Error: (06/11/2012 12:19:19) (Source: Microsoft-Windows-CAPI2)(User:))
Description: http://www.download.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootstl.cabA necessary certificate is not in its validity period when verifying against the current system clock or the timestamp in the signed file.

Error: (06/11/2012 12:19:16) (Source: KMService)(User:))
Description: WinServ (CreateProcess) error: the system cannot find the specified file.
(2)

Error: (06/11/2012 12:12:40) (Source: WinMgmt)(User:))
Description: //./root/CIMV2SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 990 x 80041003

Error: (06/11/2012 12:11:02) (Source: Microsoft-Windows-CAPI2)(User:))
Description: http://www.download.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootstl.cabA necessary certificate is not in its validity period when verifying against the current system clock or the timestamp in the signed file.

Error: (06/11/2012 12:11) (Source: KMService)(User:))
Description: WinServ (CreateProcess) error: the system cannot find the specified file.
(2)

Error: (06/11/2012 11:57:25) (Source: WinMgmt)(User:))
Description: //./root/CIMV2SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 990 x 80041003

Error: (06/11/2012 11:55:46) (Source: Microsoft-Windows-CAPI2)(User:))
Description: http://www.download.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootstl.cabA necessary certificate is not in its validity period when verifying against the current system clock or the timestamp in the signed file.

========================= Memory info: ===================================

Percentage of memory used: 14%
Physical RAM total: 16365,23 MB
Available physical RAM: 14021,18 MB
Total paging file: 32728,66 MB
Available page file: 30074,36 MB
Total virtual: 4095,88 MB
Available virtual: 3978,82 MB

========================= Partitions: =====================================

1 drive c: () (fixed) (Total: 931.41) (Go free: 214.87) NTFS
3 drive e: (KINGSTON) (removable) (Total: 28,89) (Go free: 21.8) NTFS

========================= Users: ========================================

User accounts for \\JAIRO-PC

Admin Administrator comments
Jairo

End of the log *.

I hope you guys can help

Hi JaysXY,

Thanks for posting in the Microsoft Community.

The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

TechNet Forum

http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

Hope this information helps.

Tags: Windows

Similar Questions

  • Please help problem pen in illustrator

    can someone please help my pen leaves only brush strokes as soon as I remove it from my Tablet it works fine in other programs and was working fine last night

    Some problems could be solved by updating Illustrator to the latest version: 19.1 (check "On Illustrator")

    mike19867 wrote:

    I scanned some of my manga art used as a model and make a digital contour using my Wacom 13 hd Tablet cinteq. I almost succeeded in this part of my project last night. as I found that I had a few micro gaps that prevented me from adding color to my project this morning.

    We're talking about live paint?

    Examine options for space and turn them on.

    My stylus leaves single brush strokes once I remove my Tablet but the mouse worked traits normally I panicked, thinking that my Wacom was defective, so I tried in other programs and it worked fine I could c the race progresses as I was since summer in illustrator I banging my head against the wall , trying to get it to work again.

    You lost me after the 3rd word. Breathe between writing and put interpunction here and there and then maybe someone has a small chance of him have.

    But: a stylus is not supposed to draw lines when you remove it from the Tablet, it so I guess that what you are describing is just normal behavior?

  • Please HELP * problem with dynamic regions ADF...

    Hello

    I have 2 separate workflow in my application. 'Search-user-flow' & 'create-user-flow. I got to view these feeds in my main application (home) as a dynamic region with 2 dynamic links.

    My page main split into two panels where I suppose to display dynamic links on the left side and the workflow right. Want to display the default search feeds loading the home page, and when I click on the link for the user to create, create flow must be exposed to the right side. Please help me how to do the same. I was halfway through the path, but not totally.

    Here's what I've done so far.

    Step 1) creation research-user-flow (this stream were only page fragments not pages)
    Step 2) created create-user-flow (this stream were only page fragments not pages)
    Step 3) slide / move the search-user-flow in right panel of the main page as dynamic and created new "searchFlow" managed bean and the same card.
    -(After this stage, the main research stream fragment appears in my main page)
    -(Managed bean created taskID entry and the method)

    Step 4) slide / move the create-user-flow to the left side panel as dynamic link.
    Step 5) slide / move in the research-user-flow for left side panel as dynamic link.

    During the loading of my main page, I could see 2 dynamic links in the Panel left side and 1 flow to the right side panel. Now when I click on the Create User link, it's pass the stream and display the stream of the 2nd on the right. So far so good. Now, if I hit any link here after an error. Please help me how to solve this problem and make the works of dynamic region. It is really urgent and fight with past 4 days...

    Thank you
    klogube

    Hello

    define the scope of the bean managed bean that passes the workflow to a wider scope than requestScope: viewScope, pageFlowScope...

    Frank

  • Please help, problem with the creation of PDF

    Please help me, this message keeps showing on the 3rd page of a PDF document I have to build:

    Please wait... If this message is not subsequently replaced by the good content of the document, your PDF reader isn't able to display this type of document. You can upgrade to the latest version of Adobe Reader for Windows®, Linux® or Mac by visiting http://www.adobe.com/go/reader_download. For more assistance with Adobe Reader, please visit http://www.adobe.com/go/acrreader.

    Adobe reader is already up to date

    It sounds like it may be related to create forms in LiveCycle. Here is another discussion on the issue of the forum LiveCycle error: "If this message is not finally replaced by appropriate... content." »

  • Unity - VPIM network domain SMTP, please help problem

    I need help to solve the problem of SMTP domain.

    1. the unit

    -main site SMTP domain = domain1.com

    -delivery location SMTP domain = yyyy.ca

    2 Exchange server

    -by default the recipient [email protected]/ * / and @yyyy.ca

    -SMTP transport sink = domain1.com VC

    2 3rd party mail server

    -main site SMTP domain = yyyy.ca

    -delivery location SMTP domain = domain1.com

    With the configuration, cannot the unit send to 3rd party because yyyy.ca think as local rather than remote SMTP. It works if I remove the yyyy.ca in the default recipient policy.

    I have to paste the default as above and the question is how can I solve the problem? can I create a new policy with @domain1.com only and link to the VC?

    Please notify.

    You cannot have a delivery location remotely as yyyy.ca AND yyyy.ca as a default recipient policy. You will need to create a new domain for the delivery location (one that is not on the recipient policy), and then change the local delivery on the voicemail system 3rd party smtp domain.

    It's just not possible to tell Exchange yyyy.ca is local and then expect not to deliver it to a remote location of smtp.

  • Please HELP - problem with 2 fixed column of the model Dreamweaver CS3

    I am creating a website using the 2 column fixed, no sidebar, header and footer template html in Dreamweaver CS3.  I tried to put a photo in the right side bar as well as in the part main content or to the left of the page, and no image is displayed when I view it in any of the browsers I use.

    I did some only minor changes in the colors and sizes, but other than that, no other changes.  The pic that I put in the header appears perfectly fine.

    Any help or advice for this problem would be greatly appreciated.

    Thank you!!

    I'd like to help you too.  But we do not have enough information about the structure of your site.

    Can you please download this page of test and images on a web server space and post a link?

    Otherwise, it could be that your images were not optimized for the web (jpg RGB)?  In Photoshop, click on save for Web...

    Or it may be a problem of the link path

    Change this:

    to do this:

    or this:

    Nancy O.

    ALT-Web Design & Publishing

    Web | Graphics | Print | Media specialists

    http://ALT-Web.com/

    http://Twitter.com/ALTWEB

  • Want M4: Please help - problem with Ralink RT5390 802.11b/g/n WiFi Adapter

    OK so I've had this laptop for a while and it has been great until today. I'm unable to connect to wireless internet. After reading around online for a quick solution (which I didn't), I have this to offer... I have a ralink RT5390R 802.11bgn wi - fi adapter. The drivers are up to date and the status of the device is:

    This device cannot start. (Code 10)

    {Operation failed}
    The requested operation failed.

    What can / should I do? Help, please!

    -Chris

    Hello @CBrustas,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I read your post about how you are not able to connect to your wireless network, and that an error code is displayed. I'd be happy to help you!

    To clear the error about your wireless adapter, I advise you to follow the steps described in this document on difficulty: "this device cannot start" error Code 10 in the Device Manager in Windows.

    Please re-post with the results of your troubleshooting, and I look forward to your response!

    Concerning

  • BlackBerry Smartphones Please help - problem with blackberry curve 8520

    My fone doesn't let me edit or add new contacts, except if I add to my sim card then copy it on my blackberry. Its a new need that I noticed last night and I don't know what to do? I tried to remove the battery, and replacement but it did not work!

    Please remove Windows Live Messenger or Yahoo! Messenger for now until a new update was released because one of these apps version recently update is causing the problem for most OS5 phones...

  • Please help problem PHP form

    Hi, I tried posting in another forum but I think it was the wrong that I have not much response or an answer that solves the problem.

    I'm a complete newbie to web design, but I'm trying to finish a site for my video production company small.

    I use Dreamweaver CS3 and monitoring tutorials up to this point, but I'm stuck on the last part that submits a form. After a tutorial, I had the button submit to work (send a message to my email address), but the entire field are empty rather than having the text in their areas. I put the script of my form and my PHP document below. My site is corporatevideovictoria.ca

    Form:

    < do action = "phptest.php" name = 'Contact form' target = "_blank" id = "Contact form" > "

    < div >

    < div class = "wrapper" > < div class = "bg" > < input name = "Name" type = "text" class = "input" id = 'Name' onFocus = "if (this.value == 'Name') ' this.value =" "onblur =" if(this.value=='') this.value ='Name "" value = "Name" > "

    < / div > < / div >

    "< div class ="wrapper"> < div class ="bg"> < input name ="email"type ="text"class ="input"id ="email"onFocus =" if (this.value == 'Post') ' this.value = "" onblur = "if(this.value=='') this.value = 'Email'" value = "Email" > < / div > < / div >

    < div class = 'wrapper' > < div class = "bg2" > < textarea name = cols 'questions' = '1' lines = '1' id = 'questions' onFocus = "if (this.value == ' Questions/comments') this.value =" "' onBlur =" if(this.value=='') ' this.value =' Questions/Comments "> Questions/comments < / textarea > < / div > < / div >"

    < div class = 'wrapper' >

    < table width = "300" border = "1" >

    < b >

    < td > < input name = "reset" type = "reset" class = "button" id = "reset2" accesskey = "r" tabindex = "140" value = "reset" > < table >

    < td > < input name = "submit2" type = 'submit' class = "button" id = "submit2" accesskey = "s" tabindex = "160" value = "submit" > < table >

    < /tr >

    < /table >

    < / div >

    < / div >

    < / make >

    DOC PHP:

    <? PHP

    / * Test email * /.

    $emailSubject = ' crazy PHP scripts! "

    $webMaster = ' [email protected] ';

    / * Collection of data Variables * /.

    $NameField = $_POST ['name'];

    $emailField = $_POST ['email'];

    $questionsField = $_POST ['questions'];

    $body = < < < NEM

    < br > < hr > < br >

    Name: $Name < br >

    E-mail: $email < br >

    Questions: $questions < br >

    NEM;

    $headers = "from: $email\r\n";

    $headers. = "content-type: text/html\r\n";

    $success = mail ($webMaster, $emailSubject, $body, $headers);

    / * Results made in the HTML form * /.

    $theResults = < < < NEM

    " < html xmlns =" http://www.w3.org/1999/xhtml ">

    < head >

    < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"

    < title > Untitled Document < /title >

    < / head >

    < body > Hello thanks

    < / body >

    < / html >

    NEM;

    echo "$theResults";

    ? >

    Any help would be greatly appreciated. Thank you!

    You do not define a method in your form, so that it uses the default to GET; still trying to recover your form by POST variables. Add the POST method to your form;

  • Please help - problem driver WEIRD mouse (read below) - DV4 - 1125nr

    Hello.. so here is the problem - I turned off the tap for the mouse... I type always accidentally things when I don't want to, so it is important to me that it is turned off.  The problem is that once the computer starts, it takes literally about 10 minutes for that to happen... In other words, tapping is enabled for a solid 10 minutes EVEN IF I SEE THAT it IS TURNED OFF!  This is my 2nd model of this computer - my first had a pixel died, so I returned it, but he did not have this problem (weird!).  Any ideas? Thank you!

    -Eric

    You can right click on the pointing device icon in the taskbar (bottom right of the clock) and go to the Properties section of the owners SW to massively reduce the sensitivity of the action of tapping until point of him not to recognize taps.

  • Police Please Help problem!

    I can't tools of police work.  I reinstalled the program and added the fonts folder fonts.   Why is it won't work and I would like to change? It's like half of my tools don't work.

    Do you use large fonts in the Windows interface? See the signs and tools InDesign respond not to the clicks of the mouse (Windows 7/Vista)

  • After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices &amp; their very good WiFi signals. Please help me solve this terrible problem...

    After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

    Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

    (1) restart you device.

    (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

    (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

    (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

    (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

    (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

    (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

    (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

    https://support.Apple.com/en-us/HT201252

    (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

    Council: https://discussions.apple.com/docs/DOC-9892

  • Please help wifi does not not ACER aspire 4710g (wireless network card problem)

    Please help me

    C:\Users\ali>ipconfig/all

    Windows IP configuration

    Name of the host...:-PC

    Primary Dns suffix...:

    Node... type: hybrid

    Active... IP routing: No.

    Active... proxy WINS: No.

    Wireless Network Connection 3 Wireless LAN adapter:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Microsoft Virtual WiFi Miniport adapt #.

    2

    Physical address.... : 00-1F-3A-1B-2D-F5

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Wireless network connection Wireless LAN adapter:

    The connection-specific DNS suffix. :

    ... Description: Network adapter on Broadcom 802.11 g

    Physical address.... : 00-1F-3A-1B-2D-F5

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Address IPv6 local link...: b 3 fe80::4e8:4: 4d49:acc2% 16 (Preferred)

    Autoconfiguration IPv4 address. . : 169.254.172.194 (Preferred)

    ... Subnet mask: 255.255.0.0.

    ... Default gateway. :

    DHCPv6 IOOKING...: 318775098

    DHCPv6 DUID customer...: 00-01-00-01-1B-50-87-0D-00-1D-72-1B-B7-7D

    DNS servers: fec0:0:0:ffff:1 1%

    FEC0:0:0:FFFF:2 1%

    FEC0:0:0:FFFF:3 1%

    NetBIOS over TCP/IP...: enabled

    Ethernet connection to the Local network card:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Broadcom NetLink (TM) gigabit Ethernet

    Physical address.... : 00-1D-72-1B-B7-7D

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Adapter Ethernet Local Area Connection * 11:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Adapter Anchorfree VPN #2 HSS

    Physical address.... : 00-FF-03-C6-CD-54

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Adapter Ethernet Local Area Connection * 9:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Card Anchorfree VPN HSS

    Physical address.... : 00-FF-EF-4A-57-34

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    C:\Users\ali >

    AWI

    There is a problem with the wifi adapter "wireless network connection Wireless LAN adapter:" the driver is corrupted or it is incorrectly configured.

    I would start by removing the current driver of sifi and install the latest driver available.

    The IP address for the above connection is

    Autoconfiguration IPv4 address. . : 169.254.172.194 (Preferred)

    This state it does not connect with the router.  Alternatively, you can try to restart the computer and the router at the same time.

  • To:Patrick.Iseli, Please help! PIX506 problem.

    Hi, patrick!

    Sorry, after you.

    I read your ad article abot PIX506 and NETGEAR DG814 configuration.

    I have somting problem, PIX506 configuration. AND it is similar to your PIX when troubleshooting.

    Please, help me!

    Please see below the text and attachments.

    Thank you!

    Hi, Expert everyone!

    I can't write ENGLISH well, that this will cause a problem of communication for YOU.

    I meet a problem to configure the firewall to PIX506.

    I have a firewall PIX506 and NETGEAR RP614 IP-sharer.

    Under PIX506 firewall, there are two Windows servers.

    A Windows 2000 Server is the Web server and DNS, a different Exchange 2003 server based on Windows 2003 server.

    But the problem is...

    I do not receive an email, please send an e-mail very well!

    I have document attached on PIX506 config and my network diagram.

    It's a crazy problem.

    Please please please help me, get Expert everyone.

    I posted the config in the "problem, DNS and Eachange Server Cofiguration PIX506!

    sincerely

    Patrick

  • I forgot my restriction password, let it please help me solve my problem

    I forgot my restriction password, let it please help me solve my problem

    I forgot the password restriction

Maybe you are looking for

  • PlayStation Store

    How can I access the Playstation Store from my Tablet S?

  • Resize the internal SSD flash drive

    I recently updated my original internal 750Go disc drive for a new card SanDisk Ultra II 960 GB SSD. Before installing, I cloned the original of this new SSD drive. After installation, I realized there was an amount unallocated free space (209,91 GB)

  • WRT54G2 - unable to connect to my Nintendo Wii

    Hello. I just bought Linksys WRT54G2 and tried to connect my Nintendo Wii to use it. The SSID appears, but I can't connect. I get error codes saying he was unable to connect because of my firewall. I've disabled the firewall and tried everything Nint

  • Want 5530: stop printing through a job

    Recently I had problems with my printer stop and give me an error message saying: it cannot print the document after printing several pages already. The amount if time, paper and ink I lost pages in print which have only half printed or unprinted all

  • BlackBerry Smartphones please help with audio activation combined

    Hi evryone I use a torch balackberry 9810 and the problem is when I make and receive calls, I don't hear the person at the other end. I tried to pull batery but his does not work please help?