DNS server does not not with new wireless router!

Similar Questions

• IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

  IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

  Hello

   

  Thanks for posting the question in the Microsoft Community!

  You can't use the wireless connection and the message that the DNS server is not responding.

  The problem may occur if the computer is unable to connect to the DNS server.

  To check, I suggest you follow the steps:

  Method 1: Re-register the DNS

   

  a. Click Start. Type cmd in the search box and press ENTER.

  b. at the command prompt, type the following command and press ENTER:
  ipconfig/flushdns (there is a space between ipconfig and /)

  It will display the message properly emptied the cache of DNS resolution.

  c. at the command prompt, type the following command and press ENTER:
  ipconfig/registerdns (there is a space between ipconfig and /)

  d. at the command prompt, type the following command and press ENTER:

  ipconfig/all (there is a space between ipconfig and /)
  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

  If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.
  If this is the case, try this:

  i. enough at the command prompt ipconfig and press ENTER

  II. ipconfig / renew in command prompt and press ENTER

  The test again by typing ipconfig/all to see what is the address? (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)

  Method 2:

  a. click Start and then click Control Panel.

  b. go to the networking and sharing Center and then click on change adapter settings.

  c. right-click on connection to the Local network and select Properties.

  d. Select Internet Protocol Version 6, and then click Properties.

  e. choose the DNS server to obtain an address automatically , then press Ok.

  f. Select obtain IP address automatically.

  g. Repeat steps for Internet Protocol version 4 as well.

  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/2e81fca4-35bb-4af9-86a1-7326d2fe91b3

   

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

   

• New domain today name ' hui - DNS server does not

  I'll put up a blog using WordPress software.  I recorded a doman name today and hired DreamHost to host the blog.  DreamHost successfully installed WordPress and sent me an email with a link to create an administrator. user.  When I click on the link, I get a message that the DNS server is not responding.  Verio, the company that has registered my domain name, also sent me an email with a link, I use to access my control panel.  I get the same message - DNS server does not respond.

  Because I only had access to the internet via a private with Rogers and used the e-mail account, I don't know I'm missing something simple... just do not know what.

  Please help beginners to blog!

  THX

  Ann

  Hello

  Like you are on a domain, your question would be better suited in the audience of IT professionals

  Please visit the link below to find a community that will support what ask you:
  http://social.technet.Microsoft.com/forums/en/category/w7itpro, windowsvistaitpro, windowsxpitpro, windowsintune

  Thank you

• The DNS server does not respond when try connect a Web site

  original title: dns server problem

  m using computer dell laptop with windows xp.i usually to plug my my cell phone and use vodaphone since 2 days internet.since I m unable to access all sites Web on laptop.m get a msg105 error (dns server does not)... so I downloaded the public dns server on cell n transferred on laptop and changed my dns to google dns server server... It worked fine for one day and the next day I had the same problem of server dns - no responding.so I repeated al procedure again and then it started workin again... What is the problem with my dns server... do I have to download na dinstall public dns server every time I use my laptop via the cell phone internet. ?... Help, please...

  Thank you

  It should work with the server DNS of Vodaphone.  Set the laptop to get its IP & DNS addresses automatically, then make sure that the DHCP Client service is set to automatic startup.

  John

• Unable to connect to a network error: DNS server does not

  * Original title: unable to connect to the internet - yellow on network acess exclamation point

  other computers, my ipad and phone can all access the internet via the same wifi connection.

  even a direct lan connection did not help

  shows of troubleshooting DNS server does not

  Help, please

  concerning

  Turkish Lira

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, I understand that you can not connect to the network on your computer.

  I can understand how frustrating it can be when things do not work as expected.

  To better understand this issue, I would like to know the following information:

  1. What is the brand and model of the computer?

  2. did you of recent changes to the computer before this problem?

  3. you receive an error during the network connection code failed?

  DNS (Domain Name System) translates the URL in IP (Internet Protocol) addresses (and vice versa). For example, if you type http://www.microsoft.com into the address bar in your web browser, your computer sends a request to a DNS server. The DNS server translates the URL to an IP address so that your computer can find the Microsoft web server.

  We will try the following methods and check if it helps.

  Method 1: I suggest you clear the DNS cache and see if that fixes the problem. Clear the DNS cache forces DNS to query a DNS server rather than using the information stored in the cache.

  Follow these steps:

  a. click on the 'Start' button.

  b b.. in the search box, type "command prompt"

  c. in the list of results, click on invite and then click on run as administrator

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. at the command prompt, type ipconfig/flushdns

  Restart the computer and see if that fixes the problem.

  Method 2: If you still have questions, I suggest you refer to the suggestions of Meghmala responded on 28 June 2011 from the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/DNS-server-not-responding-keeps-coming-up-and-i/58fc8366-B2B2-4A8D-9E30-56a155635631?rtAction=1422395012673

  You can also see the following article for more information:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Hope this information helps, please respond with the requested information and the status of the question to get help. We will be happy to help you.

  
  

• My PC does not connect to the Internet, a window opens and says DNS server does not respond.

  Original title: programs network networking Internet site Internet Site Web Web Site URL of the network

  My PC does not connect to the internet, a window opens and says DNS server does not respond.

  Hello

  Follow the steps in the article mentioned below and check if it solves the problem:
  http://support.Microsoft.com/kb/314095

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• the wpa security password configured on my hp printer does not match my wireless router setup

  the wpa security password configured on my hp printer does not match my wireless router

  You will need to go to the menu on the printer control panel and then go to the section wireless/network to change. Sorry for the general response, but without specific identification of your printer I can't advise you with precisely where in the menu to go.

  Thanks for posting the p/n. look on the lower back/side/tray of your printer.

• The DNS server does not - wired - wireless is OK

  Hi all

  This problem has left speechless several other computer scientists, I thought I'd try this forum before making a complete reinstallation.  Here's a challenge to test your intelligence.

  Here's the situation:

  Dell laptop (11 months - still under warranty) with Wi - Fi and ability.  Originally supplied with Vista, but I installed Win7 in November.  I tried to do the clean installation method, but do not know if I managed to 'clean' approach because I thought that my data may be wiped.  He was not, he is still on the machine.  But W7 seems to work very well, I added Slowey some software.  I think I was able to communicate with a wired connection before on the machine, but now I can't be sure.  The machine communicates wireless without problem.  IE8 opens fine.  If I connect the wire and cut the antenna or boot to the wire with antenna, the machine starts and works well, but does not connect using IE8.  I get a message "the DNS server is not responding.

  The machine can ping and ping just fine on the wire.  A chat session with Dell yesterday (Citrix I think) succeeded in transferring to wire wireless when I turned off the antenna.  In addition, the MS patch notification came through this morning, but I can't download the patches on the wire.

  Here is what has been tried so far:

  1. Changed cables and ports in the router to check the status of these question: these are OK.
  2. PC directly connected to the router: same problem.
  3. Verified services running (Control Panel-Admin tools-Online Services online):
     System event COM + (for WZC issues)
     Computer browser
     DHCP client
     DNS client
     Network connections
     Network location awareness
     Remote procedure call (RPC)
     Server
     TCP/IP Netbios support
     Automatic configuration wireless (only XP wireless configurations)
     Autoconfiguration WLAN (wireless Vista only configurations) service
     Workstation
  4. Verified IPv4 is defined in order to obtain the IP address automatically.
  5. Reset IE8.  No change.
  6. Turned off the Windows Firewall.
  7. Tried to access internet using Chrome.  No go.
  8. Wired NETWORK card uninstalled and reinstalled driver.  Downloaded last at Dell, they pushed also later.  No luck.
  9. Tried the Google Open DNS.  No difference.
  10. ipconfig/flushdns
  11. TCP/IP stack repair (run as Administrator: start, all Programs\Accessories and right click on command prompt, select "run as administrator" to open a command prompt.)
      -Entries reset WINSOCK to default installation: netsh winsock reset catalog
      -Reset the battery TCP/IP IPv4 default installation. netsh int ipv4 reset reset.log
      -Reset the battery TCP/IP IPv6 default installation. netsh int ipv6 reset reset.log
      
  12. While in Safe Mode, disconnected wire: uninstalled the driver for the CARD.  Started full W7: installed the latest driver.
  13. In Safe Mode, the stack TCP/IP repair as described above.

  All to nothing does not.  IE does not connect to the internet.  Chrome is not connecting to the internet.

  You people have any ideas what the devil is wrong with this machine?  Can you offer any suggestions to try to get access wired for the functioning of the internet?

  Thanks in advance!

  Hello Stringout,

  I said to reset the router because the router is the DNS server and assigns the IP address to all devices on the network. Now, since you get the error "DNS server is not responding. It may possible that this router is not able to assign the correct ip address to all computers.

  You can also try to update the router with the latest firmware. Still, Microsoft!

• I have a yellow exclamation mark on my wireless and signal when I diagnose the problem that Windows says 'the DNS server does not. Can anyone help?

  I have our computer server set to a static ip address, because our printers work on the network. Every time I try to connect to the internet Windows tells me "the DNS server is not responding. Can someone help me?

  It is a forum for specific consumers. You will find the Windows Server support in these forums: http://social.technet.microsoft.com/Forums/en/category/windowsserver

• Windows Network Diagnostics error message: "your computer seems to be configured correctly, but the device or resource (DNS server) does not.

  Everyone,

  I'm trying to configure the WIndows server.  I am running the following: Windows Server 2012 R2 Foundation.

  I did the following:

  1. I crossed the Config Wizard on domain Active Services and installed it.

  2 then I joined the field.  When I reboot the server, I get the following error:

  A. "your computer seems to be configured correctly, but the unit or".

  "resources (DNS server) is not responding.

  A1.  When I put a static IP address on DNS, I can't go to the Internet.  Even if

  I can go to the tank and the PING of the IP address and everything is good.

  A2.  The I change the DNS to get the IP address automatically.  Then I can get to

  the fine of the internet, but I still get the same message about a problem with the

  DNS server.

  Can someone guide me please what the issue is here?  Thanks in advance.

  3. Furthermore, I can't see the new server name/information when I go into Windows Explorer

  as part of the network.

  A. I'll go in Windows Explorer and see the other machines when I look at the network level.  Yet,.

  for the that set up simply, I can't find it, please help.

  Thanks in advance.

  Jerry

  Hi Jerry,

  I would like you to post your question in the forums TechNet for assistance:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  I hope this helps.

• The DNS server does not respond?

  Often my internet connection fails completely. It connects to any kind of Web site when it arrives. I use the option to "solve problems", and discovered that the DNS server is not responding. So he says. It happens all the time and I can't fix it myself. Can I get some advice? Maybe even a complete solution?

  Hi Jim,.

  Did you of recent changes to the computer?

  I suggest that you try the procedure described in the article below.

  Method 1:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-CA/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2:

  Please refer to suggestions of Vinod gwenaëlle replied on 10 March 2012

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-Windows_7/the-DNS-server-ISN

  Additional information:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-CA/Windows/cant-connect-Internet#1TC=Windows-7

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you

• El Capitan DNS server does not resolve host

  The server does not resolve host 'root '.

  I upgraded from an environment of Snow leopard server to the El Capitan 5.0.15 server.

  The server is running on a mac mini, which is now about 2 weeks old basis.

  Follow the instructions in the DNS settings. Hosts such as www.example.com work perfectly well.

  However, the server does not resolve example.com. On Snow Leopard server, I used to create records for hosts like example.com as www.example.com, but this seems to be not not more possible.

  Any idea?

  Thanks, XL

  to be more precise, that's what I get when a ping is made:

  Ping: impossible to solve example.com: Unknown host

• The computer seems to be configured correctly, the device or resource (DNS server) does not

  When I tried to fix this using other threads, none worked any other suggestions?

  Original title: your computer seems to be configured correctly, but the device or resource (DNS server) is not responding. I tried all of the solutions none works

  Hello

   
  
  This problem is limited to a specific Web site or with everyone?
   

  You can approach this problem in two ways: first by simply disabling the cache, but also by restarting DNS client service, which manages the cached DNS queries.

  
   
  Method 1: Clear DNS Cache

  a. click Startand type cmd in the Start search box.

  b. right click on cmd in the list programs, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  c. at the command prompt, type the following line and press ENTER:

  ipconfig/flushdns

  Usually, it clears up any issue that may occur.

  
   
  Method 2: Restart the Service DNS Services

  a. Click Start and run, type services.msc, and then click OK.

  b. double-click the DNS Client service. If you receive a Configuration Manager message, click OK.

  c. in the Startup Type list, click on restart and then click OK.

  d. close Services.
  
  e. restart the computer.

  
   
  Method 3: Configure the connection to obtain an IP address automatically

  a. click on 'Start', enter "NCPA. CPL' (without the quotes) in the search bar and press "Enter."

  b. right-click on the network connection, and then click on 'Properties'. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. click on select 'Internet Version 6 (TCP/IPv6) Protocol' and then click 'Properties' of .
  
  d. Select "obtain an IP automatically" and "DNS server automatically get an address.

  e. click 'OK'.

  f. highlight "Protocol Version 4 (TCP/IPv4) Internet" and click on "Properties". "" "

  g. Select "obtain an IP automatically" and "DNS server automatically get an address.

  h. click on 'OK'.

  i. restart the computer.

  See also:

  Why I can't connect to the Internet? http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

• DNS server does not not on one website

  We have a web site that we cannot enter. The outside of our House, we from computers. It is said that the dns server is not responding. Any ideas?

  Sorry for the stupid question. I usually fix things myself so I'm not used to ask questions.

  Yes, I ran the store. The problems resulted in telling me that there is a problem with the dns server. Laughing out loud. I tried to open it in IE, Firefox, Google Chrome and Safari.

  I went to open dns... no prob now. Thanks for your time.

• 6500 a plus does not connect again wireless router

  I have a new wireless router. I can not connect with the 6500 has more via the WPS button or PIN. I also tried such and pass phrase nothing helps. I know wps works because she works with other devices. What that other router settings should I watch. ?

  I tried to change to the WPA + WPA2 WPA2 security. Same result.

  Print network test says everything is fine but no IP address.

  Try channel 1, with security.    If no go, change in the router in 'mixed' mode, 20 Mhz only.