DNS servers to reset

Similar Questions

• No internet connection, no dns servers.  Help, please!

  Hello

  I have an Apple Airport Extreme, I had used with internet of Cox for the past 2 years.  I recently moved and had to sign with Time Warner Cable.  I decided to buy my own modem this time, but were not able to configure my wireless network.  I can connect via my wireless hard connection ethernet (via the router) very well.  The led is green on the internet connection, but the flashing orange on the Airport Extreme.  He said that the problem is not internet connection (which is said to pass the modem which does not work) and not dns servers.  I can put in the dns servers (I've tried a few different things to include 8.8.8.8 and 8.8.8.4) who get rid of this message, but I still have the first internet connection.  My Version of Airport utility is 6.3.5, my modem is a Motorola Surfboard SB6141.

  Help, please!

  The Motorola modem will have need of a power extended down with Time Warner service in order to obtain a new valid IP address of the Server Time Warner... and... Ince you have changed providers and modem... AirPort Extreme will be reset to the factory settings and then set it up again, so that it "learn" the new settings he needs.

  If you decide you want to try our tips...

  Turning off the modem by pulling on the power cord to the back of the unit

  Unplug the co - ax cable and Ethernet cable so

  Let off for at least 30 minutes the modem... 60 would be better... more won't hurt

  While the modem is turned off... and with the AirPort Extreme on for a few minutes... Press and hold the reset button on the back of the airport for 7-8 seconds, then release and allow a minute for the airport restart to a slow status of amber light, flashes.

  Then, turn off the AirPort Extreme

  Once the modem has been turned off for at least 30 minutes, plug the co - ax cable and Ethernet from the modem into the WAN "O" on the AirPort Extreme port cable

  Turn on the modem and let it run for at least 10 minutes by itself

  Then, turn on the AirPort Extreme and let it run a few minutes

  Set up AirPort Extreme again and check to see if everything is operational

• blank static ip dns servers

  I have a XP SP3 workstation I need to assign a static IP address.  Our network has a domain with 2 DNS servers.   I entered the necessary information for the IP address, subnet mask, gateway by default and DNS on the XP machine, then rebooted.  After that, I have no internet access and get the error event 1053 and 15 in the application log.  I checked the properties of TCP and DNS fields are empty (I'm positive, I put them properly and have retried it a dozen times).  If I set the NIC in DHCP, it works fine and no error is generated.  I tried using "netsh int ip reset c:\resetlog.txt" TCP reset but still not the same error.  This is a new installation, so I know there is not no virus or malware, the origin of the problem.  I was going to try to replace the NETWORK card, but the system is a small form factor box so I have to buy one and wanted to make sure that could solve the problem before the $.

  Tried that too... no dice... I found the cause and solved the problem.  Our network is running Symantec Endpoint Protection antivirus/malware protection.  There is a feature in version 12.1 called Sonar that protects against network intrusions.  Politics on the affected workstation has been configured to block changes DNS... where the DNS settings Virgin when I tried to set them manually.  I have changed the policy to allow DNS changes, entered the IP subnet gateway and DNS, restarted, and... It's working now!  Thank you O of Cameron and PML for your help.

• Cannot find DNS servers

  When I try to check my DNS servers by 'ipconfig/all', it shows it as the dns servers. Does anyone have a solution?

  fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1
  
  
  Here is the ipconfig/all command
  Microsoft Windows [Version 6.1.7601]

  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  
  

  C:\Users\Marc>ipconfig/all

  
  

  Windows IP configuration

  
  

  Name of the host...: Marc-PC

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  ... DNS suffix search list: hsd1.ca.comcast.net.

  
  

  Ethernet connection to the Local network card:

  
  

  The connection-specific DNS suffix. : hsd1.ca.comcast.net.

  ... Description: NVIDIA nForce Networking Controller

  Physical address.... : 00-17-31-CC-76-E4

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::d095:78ea:1924:fcaf % 11 (Preferred)

  IPv4 address: 192.168.1.102 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Sunday 29 July 2012 08:18:29

  End of the lease...: Monday, July 30, 2012 19:33:58

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DHCPv6 IOOKING...: 234886961

  DHCPv6 DUID customer...: 00-01-00-01-17-79-6D-2E-00-17-31-CC-76-E4

  
  

  DNS servers...: 198.153.192.60

  198.153.194.60

  NetBIOS over TCP/IP...: enabled

  
  

  Ethernet connection to the network space 2 card:
  
  
  The connection-specific DNS suffix. :
  ... Description: Hamachi Network Interface
  Physical address.... : 7A-79-05-59-36-1F
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::b4ab:f52:698f:1de6% 13 (Preferred)
  IPv4 address...: 5.89.54.31 (Preferred)
  ... Subnet mask: 255.0.0.0.
  Lease obtained...: Sunday 29 July 2012 08:18:27
  End of the lease...: Sunday, July 29, 2012 20:20:51
  ... Default gateway. : 5.0.0.1.
  DHCP server...: 5.0.0.1.
  DHCPv6 IOOKING...: 393902386
  DHCPv6 DUID customer...: 00-01-00-01-17-79-6D-2E-00-17-31-CC-76-E4
  
  
  DNS servers: fec0:0:0:ffff:1 1%
  FEC0:0:0:FFFF:2 1%
  FEC0:0:0:FFFF:3 1%
  NetBIOS over TCP/IP...: enabled
  
  
  Tunnel adapter isatap.hsd1.ca.comcast.net. :
  
  
  State of the media...: Media disconnected
  The connection-specific DNS suffix. : hsd1.ca.comcast.net.
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  
  
  Card tunnel Local Area Connection * 9:
  
  
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:5ef5:79fb:18 c 4: 33e3:3f57:fe99 (Pref
  made a mistake)
  Address IPv6 local link...: fe80::18c4:33e3:3f57:fe99% 12 (Preferred)
  ... Default gateway. :
  NetBIOS over TCP/IP...: disabled
  
  
  Tunnel adapter isatap. {1ED6B131-CC39-4975-A48E-8383FC24FB35}:
  
  
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  
  
  Card adapt 6TO4 tunnel:
  
  
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2002:559:361f:559:361f (Preferred)
  ... Default gateway. : 2002:c058:6301:c058:6301
  DNS servers: fec0:0:0:ffff:1 1%
  FEC0:0:0:FFFF:2 1%
  FEC0:0:0:FFFF:3 1%
  NetBIOS over TCP/IP...: disabled
  
  
  C:\Users\Marc >

  Hello

  1. you remember to make changes to the computer before this problem?
  2. What is the number of brand and model of the computer?

  Follow these methods.

  Method 1: let us reset TCP/IP and check.
  To reset TCP/IP stack to go to this article and follow the instructions.
  http://support.Microsoft.com/kb/299357    

  Method 2 . Follow.
  Step 1.
  a. connect to your router (by typing 192.168.0.1 or 192.168.1.1 in the address bar) and connect. Check your user manual or documentation if you don't know the references of logon.
  b. make sure you are in the configuration - basic configuration category.
  c. scroll down until you see "DHCP Server" - if it is disabled, select 'enable '.
  d. enable DHCP if you want, you can change the number that starts the DHCP IP assigning. (This is optional)
  e. use the DNS servers provided by your ISP. There are many DNS servers out there. It is preferable to use your ISP if possible.
  f. scroll down and click 'Save Settings'.

   Step 2.
  a. click Startand then click Control Panel.
  b. go to network and sharing Centerand then click on change adapter settings.
  c. right-click on Local area connectionand select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server address automatically, and press OK.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

• Why is-36 of Firefox on Windows receiving connections from DNS servers? Option network.dns.get - ttl

  Following update Firefox 36, my firewall was flooding asking me to allow external connections from the Internet to my browser. Looking at it more closely, Comodo Firewall indicates that external websites are trying to connect to Firefox, port 53 to an arbitrary port on my machine.

  If I disable the option FF36 new network.dns.get - ttl, it stops. I can't find any documentation or help on this option.

  Why Firefox do this? Is Comodo incorrect when he labels it as an external connection attempt? (It has normally been extremely good to differentiate the incoming and outgoing traffic). I guess that Firefox is trying to determine the TTL for DNS caching, but it is not make sense why DNS servers then try to connect to me.

  I am reluctant to create a firewall rule to that arbitrary Internet connections on my machine are OK as long as their origin on port 53, tips on how to manage all that this new feature is firmly States would be appreciated.

  Thanks in advance for any help.

  Hi grammarye,

  Yes, you're right in thinking that Firefox is trying to find the TTL value. This is new in Firefox 36 behavior and was presented as services frequently changing DNS records (such as Cloudflare) were not working properly for Firefox users.

  Firefox makes asynchronous DNS searches - which means it will make a DNS query and then proceed to perform another task instead of waiting for an answer.

  Your ISP DNS server puts in cache only TTL an area for a short time, so if it does not the current LIFE expectancy, he will interview with other DNS servers to find.

  IANAE, but probably what is happening is:

  1. Firefox tries to find the DNS record for the domain that you want to connect to
  2. Your ISP DNS server does not have the current LIFE expectancy, then connects with other DNS servers to find
  3. During this time, Firefox lingers with something else
  4. DNS server, then reconnects to give you full DNS, including the TTL check
  5. Comodo sees the packets of the DNS server and panic

  I completely agree that arbitrary ports of white list is a bad idea, but in this case, the behavior is completely harmless.

  You can want to whitelist Firefox in your Comodo Firewall, or continue to let network.dns.get - disabled ttl.

  (edited to fix broken links and add a sentence)

• Using google DNS servers creates a security hole?

  Hello

  So I had slight problems with browsing the internet. Although it is not so frequent, sometimes I can not open sites and I encounter the message "safari could not find server'. Therefore, I thought that by using the dns servers of Google (8.8.8.8 8.8.4.4) could help with that. However, I wonder if using a public dns server instead of the ISP can harm to the security of my camera somehow.

  Thanks in advance

  Do not be afraid.

• Policy update for several networks with specific DNS servers

  I have a network of medium size with 5 locations with different IP addresses. All the sites host their own DNS servers and connect directly through a dedicated VLAN access provider.

  Main site	10.1.1.1	255.0.0.0
  Remote site 1	192.168.100.1	255.255.255.0
  Remote site 2	192.168.101.1	255.255.255.0
  Remote site 3	192.168.102.1	255.255.255.0
  Remote site 4	192.168.103.1	255.255.255.0

  All sites can be managed via the main site, but have their own DNS servers on-site.

  My goal is to point all computers and devices on a new DNS server for their previous static assignment. (XP and later)

  My question is can I use GP or DHCP * for information push on each apparatus, this DNS server that makes site specific without having to travel to these places?

  Requirements:

  All devices of 10.1.1.1 10.1.1.2 to 10.1.1.4 change (old decom 2 k 3 Server)

  At each location of 192 DNS servers will have to point the secondary server to 10.1.1.4

  Handheld devices will use 10.1.1.4 as primary and 10.1.1.3 as secondary.

  Devices at each site shall keep their respective DNS server.

  * If I use DHCP to change the information on a per level of scope, I can use GP to force computers with locally defined static assignments update the static DHCP assignments

  Bonus: If someone can give me an estimate on how much traffic/band bandwidth network that it would create would be great because I consider well shift assignments as I am a business 24 hours a day.

  Hello

  I advise you to repost the question to the TechNet forum for assistance.

  http://social.technet.Microsoft.com/forums/en-us/home?category=itmanager

  Related topics:

  http://www.winvistatips.com/threads/push-new-scope-settings-from-DHCP-server-to-all-reservations.725644/

  How to use DHCP to provide routing and remote access with the additional DHCP Options Clients

  http://support.Microsoft.com/kb/232703/en-us

• Name for name resolution? has expired after no configured DNS servers responded.

  Hello

  I just bought an Acer Aspire 571PG V5.  Whenever I do anything that involves the use of the radio I usually get the following error in the Windows system event log:

  "The name resolution for the community.acer.com name exceeded after no configured DNS servers responded".

  The address featured in changes to error messages according to what I'm trying to access the website.  In this case every 30 seconds or more.  The error ID is 1014, and the Source is 'DNS Client events'.  I'm not sure what the problem.  I have two other laptops on my home network using the same router and they are fine, I've never had a problem with them.

  Has anyone else encountered this problem?

  Kind regards

  Chris

  Hello

  Just to inform that I had this work.  Even though I had brought just the laptop today, it seems readers wireless on it was already outdated.  I downloaded readers wireless updated from the Acer support site and I don't have this particular problem.

  Kind regards

  Chris

• Linksys E3000 (changed to 199.182.166.168 DNS servers) No. Playstation Network Access

  For a month I got weird pop ups on my IPAD, ANDROID phones, desktop computers AND home. I just thought that I had a bad month and I need to spend more time with my individual devices and get clean them. I then noticed recently, last week I was unable to connect to the Playstation network (NAT Type failed, the Internet connection Test failed). This was happening on my PS3 and PS4. I direct connect of PS4 and PS3 to my Modem cable from Time Warner and I have no problem. Everything works fine. But when connected to wireless or wired to my Linksys e3000... no dice.

  I connect to my router and so some research. I noticed that my DNS servers are 199.182.166.168 and 199.182.166.169. I decided the router and then restart my cable modem. Routers Gets a new address and but there are still some problems with the connection to the network Playstaiton (could be downwards). I noticed that my IP DNS address is different.2xx.xxx.xxx.xxx.  I restore the configuration on the router and DNS goes back to 199.182.166.168.  This is all the information I have at the moment. When I get home tonight I'll have more information.

  Does anyone else have this problem?

  Is the router configured for DNS custom or did you automatically detect DNS of the ISP service and ISP modem?

  What modem to ISP Mfr and model # do you have?

  You could ask the ISP service as well about it. Usually they don't change DNS very often.

  It is recommended to test for other DNS services if you want to use different DNS, you can use this:

  http://www.grc.com/DNS/benchmark.htm

  or http://code.google.com/p/namebench/

• 192.168.1.1 is removed from the list of DNS servers

  I have a Linksys E3000 and I see the gateway (192.168.1.1) in my DNS server address.

  1. why this figure here in the DNS?

  2. how to remove from my DNS servers or stop the router insert it into my list of DNS servers?

  Tchard wrote:

  I have a Linksys E3000 and I see the gateway (192.168.1.1) in my DNS server address.

  1. why this figure here in the DNS?

  2. how to remove from my DNS servers or stop the router insert it into my list of DNS servers?

  I have an EA3500 with the latest firmware and there is a problem that HE never used "CPCI DNS" parameters through the router UI even if your connected devices shows these DNS addresses under 'ipconfig/all '.

  If you set manually the DNS settings of the card interface NETWORK (using Google or other DNS servers), then you will see that the gateway or default router address is not liseted in your list of DNS servers.

• How to set an IP address manually and manual DNS servers for my printer HP Photosmart 7525?

  Cannot print.  EU of evil when the printer was initially put in place.  "Happytohelp01" Assstance solved the advised me; a manual IP address unBalayage DNS servers for the printer.  I did not write the information and now my printer is not working (it only worked for about a month), now nada.  I've had at the start of the connection to the web server problems - now its doing the same thing, but I don't know what IP Address and DNS to use.  Please help if you can.

  Hi @LaceyNo1,

  Welcome to the HP Forums!

  I understand that you are wondering, how to set an IP address manually and manual DNS servers for your printer HP Photosmart 7525. I am pleased to see that for you!

  After some research, I think I found the post, my colleague @happytohelp01, helped you with. In this post, Re: Photosmart 7525.

  Hope this is what you are looking for and have a good day!

• DNS servers for the collector

  Hello

  When I run 'show ip' to the collector console, I noticed there are 5 configured DNS servers. But the two servers as I entered during installation are #s 4 and 5. What are the other name servers and it is desirable or possible to change the order so that my DNS servers are first in the list?

  Thank you

  Andrew

  Hi André,.

  SSH in the collector as an administrator and run the following command:

  conf dns d

  for each of the 3 existing DNS servers which are not yours. You should see that your DNS servers.

  Thank you

  Lynden

• Unable to set the IP address and the DNS servers manually

  I am running Windows 7 Professional 64-bit with SP1 on a Lenovo ThinkPad. The problem is that whenever I connect to my home LAN I can not put addresses IPv4 and DNS servers manually. Once I got close and open network and sharing Center option 'obtain an IP address automatically"is re-selected.

  I tried to set the IP address and DNS servers by entering the control panel command in administrator mode but the problem persists. The problem with the automatic configuration of IP addresses, is that my ISP DNS servers are slow, resulting in a slow internet. I also tried just setting DNS servers leaving windows automatically get IP addresses, but that did not too.
  I appreciate any ideas as to why this is happening and how ressemelable this question. Thanks in advance.

  Hello

  I suggest you to ask your question on the TechNet Forums, where we have some support professionals who are well equipped with knowledge on area issues, to do so please visit the link provided below.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

• Error 105 - unable to resolve the addresses of DNS servers

  Hello! I'm sorry from the start for many stupid questions, I'll ask. I am a beginner :) I don't know if my rooter is the problem or the network cable, when I use cable internet, it works (bad but it works). When I try to go with my router (d-link dir-635) it appears the error 105. I tried all your suggestions, but still nothing. I can do something else or my rooter is dead? PS: I am on Windows 7. Sorry to bother you again!

  Hello

  Please contact Microsoft Community.

  According to the description, it looks like you cannot resolve the address of DNS servers. The probable cause of this problem may be due to the DNS.

  I have a couple of steps that should help you to solve this problem.

  Method 1:

  Try the resolution of the problems mentioned in this link

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Visit this link and see "How can I clear the DNS cache?

  http://Windows.Microsoft.com/en-us/Windows7/DNS-domain-name-system-frequently-asked-questions

  Method 3:

  Try to assign the DNS manually and check

  To change the settings of the adapter wireless network connections.

  a. Click Start, type network and sharing Center in the start search box and press ENTER.

  b. click on change settings card, right click on wireless network connection and click on Properties.

  c. Select Internet version 4 Protocol, click Properties.

  d. place a next point to use the following dns server address.

  change the preferred dns 208.67.222.222 and dns auxiliary as 208.67.222.220 and click on validate the output parameter and click on ok.

  I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

• Im trying to open the tutorial of 23 minutes on how to use different tools in photoshop and it continues to come with unable to resolve the DNS servers worked fine yesterday? Ive had creative cloud on my laptop for a week and still have not been able t

  Im trying to open the tutorial of 23 minutes on how to use different tools in photoshop and it continues to come with unable to resolve the DNS servers worked fine yesterday? Ive had creative cloud on my laptop for a week and not yet able to get past the basics make me very frustrated.

  I guess you meant the links when you open photoshop CC. I tested all four videos of the 23 min tutorial and they all played fine. If something between you and adobe does not work correctly.

  • Check that your firewall is blocking the net. Try to access youtube videos and see if they play very well
  • Go to the adobe tv site and try to play one of the videos here. Adobe TV
  • If youtube plays very well and adobe tv does not work, next is to check if you have flash installed. Some videos require flash, others are html 5. Sorry that I could not confirm what player has been used for this tutorial. I think that html 5 but not sure.
  • Next is to look at the properties of your browser and check multimedia settings are not disabled if it y in a. (this is totally dependent on the browser)

  If none of this helps, let us know.