Do darker colors... Gray and light blue screen hard to see

Similar Questions

• How can I change the color of the cloth? I tried right click changed to black, gray and even blue but it is still white and mixes with the artboard

  How can I change the color of the cloth? I tried right click changed to black, gray and even blue but it is still white and mixes with the artboard

  It should be present.

  

• Qosmio F60 - stop slower and a blue screen with driver out of State

  Hello
  I've only had the F60 for a few weeks and although it worked well for 2 weeks, 2 days has been a disaster. First AutoCAD crashes during startup and does not at all.
  So, my Outlook 2007 do not meet 1 / 3 times.
  Finally, whenever I stop, this is a very slow stop (10-20 minutes) and then blue screens, restarts and says that it is a driver fault status.

  Help - what someone else had these problems?

  You'll be lucky if someone else uses the same software as you and you can check this.
  My personal opinion is that all of the problems described are certainly software related issues.

  We do not know how you set up your laptop, what modules are preinstalled, software that runs in the background and all other important info is not easy to discuss these issues.

  I'm sure that you do not have these problems on the first day, right?

  I know you hate me now, but maybe you should back up all your important data and install the OS to help original Toshiba recovery image. After having this software to remove all the preinstalled you do not need (additional Toshiba stuff) and continue with the installation of Microsoft Office. Check the functionality and continue to install your favorite step by step software and watch carefully what happens.

  Also disable automatic Windows Update and change this option to check for updates but let me choose... option. So, you will have full control over updates.

• Downloaded updates and the blue screen now

  I installed Kb970653, kb973874, kb972036 & kb973879 and when I restarted the computer I got a blue screen of death. I did a system restore and I tried to update again, and the blue screen of death came. I restored the system, but how can I stop this from happening?

  Thank you
  Matt

  This thread contains the fix!

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/c619f139-00e3-4492-8972-1ea8dc3b13a9

  If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!

• Why my computer off and get blue screens

  Why my computer off and get blue screens once from time to time. My hard drive sounds like he works hard. I can hear it ticking sweet sounds when I start the computer, and it takes a while to calm down.

  Ron

  Hi Ron,

  I suggest you to follow the steps mentioned below and give us the blue screen error message.

  1. click on Start and then click on Panel.

  2. click system and Maintenance , and then click System.

  3. click on Advanced system settings.

  If you are prompted for an administrator password or a confirmation, type the password or click on allow.

  4. click on the tab Advanced and then click settings under Startup and recovery.

  5. to the failure of the system, click on to erase automatically restart checkbox.

  6. click OK and then click ok.

  7. try to reproduce the error.

  Reference:

  How to fix error Bluescreen (STOP) that causes Windows Vista to shut down or restart unexpectedly.

  http://support.Microsoft.com/kb/958233

• Cannot change anything in the action center error code and the blue screen and stops.

  I can't do anything on my computer with windows7 can not install updaets or sofyware of security I get an error code and the blue screen and stops

  OT:everytime I try to change anything whatsoever in the action center ndour windowws blue security and my computer shuts down

  Hey Chrisb,

  You did changes to the computer before the show?

  Step 1: I suggest to start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• I am currently studying and modules are in PDF format. I desperately need to change the background color, as white background cause my eyes to water after a few minutes. I was able to change the background color of a light blue before the l

  Can someone help me please?

  [Left the lounge general Forum, troubled for a specific product - Mod support forum]

  Hi arthurd55302175,

  You can try to change the background color of the document by using the Document color replace.

  Open the required PDF, go to edit menu > accessibility > replace color Documents.

  You can use contrasting colors option to select the required combination of colors provided in the list or you can use "custom color option and select the color needed for the page background and document text."

  Then click OK to save the settings.

  Kind regards

  Meenakshi

• HP pavilion d4790y displat a bands and error blue screen

  HP pavilion d4790y displat a scratches, then blue screen error "cannot reset the display driver and recover from timeout failed" running GEForce 7500LE w/tv, DVI output, VGA has my card that went wrong? only to start in safe mode under vista home premium CPU Intel Dou processor E6700 2.66 GHz SATA hard

  Hello

  Try another monitor and cable on your PC in order to eliminate the PC as possible problem. You can also try your monitor and cable on another PC.

  Open your PC and see if the fan on the video card.  It can be full of dust.

  If the card turns out to be defective, must you output s-video port? If so, then look at this 9500 GT from NVIDIA.

• Satellite L630-10R - do not start and a blue screen

  Hello world

  I recently bought this laptop which had everything to convince me, unfortunately, I was a problem since last night and I want to try all reasonable before returning to ensure.

  I was using the computer quite by chance (online games, web browsing, especially VoIP) when he decided to stop and restart. Now, whenever I try to start windows, even in safe mode, I get a blue screen as soon as I entered my password. The same problem occurs when you try to run in safe mode.

  I thought it might just be a very aggressive and effective virus and thought it was well deserved, knowing that I had not yet installed an antivirus. So I burned a Ubuntu liveCD on another computer and tried to recover my data from here, but nothing helps: Ubuntu does not start or, on the contrary it gives me just sort of memdump or stacktrace (at least I guess that's because it has hexadecimal addresses and what looks like function names)

  I'm kinda stuck and I really don't understand what could have caused this. Any idea would be appreciated. A code error that appeared when you attempt to start windows, but don't _always_ appear not, is something in the sense of * DRIVER_IRQL_NOT_LESS_OR_EQUAL *.

  Thanks in advance,

  Shin

  Hey Buddy,

  Theoretically, it could be a driver only issue

  If you want to try everything before bring warranty, you should try a Toshiba Recovery disk system recovery facility.

  It work?

• Satellite L840 - update of the BIOS and the blue screen

  Hello

  I recently bought a Toshiba L840-04f (PSK8LA - O4E007) and installed Windows 7 64-bit.

  Problem: BlueScreen

  Question: I guess it's the dreaded "blue screen of death' and I need to do something to prevent servious problems in the future (I used the laptop slightly for a few days with no problems).

  How to analyze the dump of information to find out what caused the blue screen?

  Or is it better to make it back in the last restore point before the blue screen event? A restore point was made until I updated the BIOS to v 1.80 to 6.20. In addition, Toshiba shows that there is a new version of BIOS 6.30.

  Before the blue screen event I had changed the setting of the 'close' button on/off and made some other minor changes to settings and then I connected a Seagate external hard drive just before the Blue error screen.

  Y at - it suggestions on what steps should I take?

  Thank you very much.

  April

  Hello

  The BSOD appears usually due to software problem or hardware problem.
  You said that you have connected an external USB HDD to the computer just before the BSOD appeared so likely the BSOD was caused by the attached HARD disk who knows

  If that happened for the first time, don't be afraid, maybe it's just a time issue
  But if he appears often, you should study some more and must try to reproduce the problem and the reason

• HP Pavilion dm4-1024tx Enterta: upgrade to 8 GB of memory and is blue screen problem

  Product: HP Pavilion dm4-1024tx Entertainment Notebook PC
  Product number: XC651PA
   
  I have corsair Vengeance ram 8 GB (CMSX8GX3M1A1600C10) that as a result of the configurations as mentioned below:
   
  SPD 9-9-9-24 latency
  SPD speed 1333 Mhz
  SPD voltage 1.5V
  PC3-12800 (1600 MHz) memo speed
  Tested latency 10-10-10-27
  Tested 1600 Mhz speed
  Tested voltage 1.5V
   
  It passes the test of memory BIOS.
   
  BIOS VERSION: Hewlett-Packard F.27, 21/12/2011
   
   
  But when I boot windows 7, it shows the windows symbol and then it shows the blue screen with the error
   
  STOP: 0X0000007E
   
  If I replace memory corsair with the memory that has been delivered with the laptop the system only works very well.
   
  Corsair memory is not compatible with the system?
   
  I have a dual boot and installed ubuntu on this subject. Ubuntu loads perfectly fine, but after a while the system restarts automatically (IE open application).
   
  I tried memorytest86 to test the memory, but the application continue to crash and reboot and does not provide any results.
   
  Help, please.

  The RAM is not compatible. The system allows a maximum total memory of 8 GB and uses DDR3-1333 which downclocks at 1066 speed. You cannot use a single module of 8 GB. 4 gigs is the large single module supports the system. I suspect the memory that you have will work fine if you had modules of 2 x 4 GB instead of a single module of 8 GB. That's why memtest is not finished. The controller memory motherboard is not able to take up 8 GB of RAM by a single channel.

• W510s question, docking station and the blue screen

  I have 4 W510s that works perfectly when undocked, but when it is docked, that they either a blue screen when you use them, or hang after loading windows page (just has a display empty afte RL loading page), or after the page load they restart Windows.

  I've updated the bios, updated graphics drivers,.

  Please I need help on this

  I would be really appreciated it

  Thank you

  they have all their own separate docks.

  But anyway, I found the answer, I downloaded the updated nvidia driver since

  http://www.nvidia.com/object/notebook-Win7-WinVista-64bit-275.33-WHQL-driver.html

  and they all work very well now.

  I always thin it's weird that they all had this problem at the same time, I guess it's a windows update that has been deployed which triggered it.

  but thanks for your concern, duly appreciated.

• Does not start, get and Driver_IRQL_not_less_or_equal blue screen

  I get a blue screen during boot and my windows XP SP2 based computer will not start.  Additional information on the screen is

  STOP: 0X000000D1 (0X3D10047F, 0X00000002, 0X00000000, 0X85B7A10F)

  No idea what this could be.  Help would be appreciated.

  You have installed any new software driver or hardware recently? You should try to repair the installation:

  How to perform a repair of Windows XP installation releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Windows will not work stopped... it crashes with just a mouse pointer and the blue screen.

  Windows will not be stopped.  Laptop crashes with blue screen and a mouse pointer.  This laptop has XP Professional SP3.

  Look in the event log to see if any errors are recorded.  Install the Service Profile Hive Cleanup (UPHClean) Microsoft and see if things improve.  See here for more information:

  You experience disconnection problems on a computer based on Windows XP, Windows Server 2003 - based, Windows 2000 or Windows NT 4.0-based:

  http://support.Microsoft.com/kb/837115

  John

• Get the random stop downs and error blue screen

  Original title: need help with 2 problems

  OS: Windows vista Home premium 64-bit

  Laptop HP dv 9000

  #1: random stops or blue screens, screens of plaid, split screens, etc. after its judgment, requires the restore to the restore point

  #2 error 10 w /! (yellow) verified "WPD files impossible to install system volume driver" starts pilot; driver update (says it is updated)

  technologically challenged both need very specific assistance/instruction; Thank you

  Hello

  Did you change your computer?

  I suggest you to follow the steps from the links and check out.

  Method 1:

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

  Method 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly