Do drag & drop using Booleans - question!

Hello to all 2!

Here's what I'm trying to do:

I have 2 Boolean commands that has one independent of the other on the front panel.

I want to be able to change the State of the control 'Slave' drag-and - drop 'Master' on it.

Example:

'Master' - WRONG initially.

'Slave' - initially set to TRUE.

After drag & drop operation:

'The master' - always FALSE.

'Slave' - becomes FALSE.

Here's a vi in which I tried to address this problem.

This behavior is possible?

Thank you!

Andrew.

you want to do something similar to this? This isn't a perfect example, but I hope this will help you

Tags: NI Software

Similar Questions

  • Quiz questions mixed with Drag & Drops - Quiz review issue

    Hello

    Is there a way to show the right answers for a drag and drop exercise if the learner chooses wrong?  My problem is that I have an evaluation with different types of questions (Multiple, Matching and Drag & Drop choice questions).  When the test ends and the click of the learner "Review Quiz", they can view their errors on Multiple choice and matching questions but not answers for fiscal drag-and - d├⌐poser.

    I tried to add a failure slide so that when the learner chooses bad, they jump to a slide of failure which shows the good answers/layout for drag / move.  The problem I have is once that the learner reviews the results of question Multiple choice and matching, there is no next button on the last slide of the question, if the review stops right in the middle.

    I was hoping there is a way to let the learner to make two attempts to the drag / move, and once the learner has used all attempts and is always incorrect, the learner can click a button to auto-submit to see the D & D response.

    I use 8 Captivate and my ratings are based on the web so I'm not using an LMS System.

    Thank you

    Jeff

    Interaction in D & D, even if configured as a question slide, has still not all of the features of the normal question slides. If I find a solution to your problem, will post as soon as POSSIBLE.

  • using the FC command with the GUI drag & drop

    In Windows 95 and 98, it was possible to make a shortcut to the "CF" MS-DOS command on the desktop, and then compare two files by drag & dropping them on the shortcut.

    However, starting from Windows XP, while this still TECHNICALLY works, the MS-DOS window (I do not remember what to call other than "command prompt window", so bear with me) will close immediately upon expiration of the program, making it impossible to read the results, especially if it is "no differences encountered".

    I remember that there was no decent way to solve this problem in XP, but is there a solution to Vista or 7? Typing long file names can be heavy, and even by using copy and paste is tedious compared to the ease, I remember not on Windows 9 X.

    Oh, I just had a thought when you think of batch files. I tried to add a pause at the end command. That seemed to work. It has been long since I made a batch file that needed the pause command. I don't know why I thought using a batch file with a command to break a decade ago.

    Oh and thanks for the link explaining the differences in the manufacture of the batch files. I learned how to 3.30 in 1990 for MS-DOS batch files and never really learned anything new other than the fact that I could use drag-n - drop in Windows 95.

    Is there something else that I could learn a few new tricks that have been introduced since MS-DOS 3.30? I _might_ have read books for MS-DOS 4 or 5 at the time, because there weren't really that many differences. The only different things I knew were the dosshell in MS-DOS 4, Edit & QBASIC in MS-DOS 5 and extended external help of 6.2.2 MS-DOS command which was similar (although I didn't know it until the end of the 1990s) for Unix man pages. Oh, and in one of these versions, they also did better? parameter help messages.

  • Drag & Drop sometimes gives excessive use of persistent processor (WKS TP June 2012)

    The host Windows 7 x 64 SP1 Workstation Tech Prev June 2012 16 GB, 4 CPU

    Comments Windows 8 x 64 Release Preview 2 GB, 2 vCPUs

    Drag / drop a file from the host to the client desktop sometimes shows the pointer of the mouse as circle with slash and translates VMware tool Core Service using 100% of the total CPU, or 50% on the two vCPUs.

    Before a Drag & Drop and after a Drag & Drop

    DragDrop1CPU.jpg

    Most of the time the CPU spikes result when Drag & Drop fails, that is, it shows a circle with a slash in the world mouse pointer, then roll the mouse off the desktop and on the back and an icon from the taskbar a few times shows finally the mouse pointer from the anchor and it can be moved successfully on the desk of comments.

    And after a few minutes, this excessive CPU reduced to 1 vCPU charge, but never goes away until vmtoolsd is finished.

    DragDrop2CPU.jpg

    Details:

    DragDrop3CPU.jpg

    DragDrop4CPU.jpg

    I noticed that there are 2 vmtoolds.exe running, dieting and the other under the user, but under the user.

    Also, I remember seeing this same behavior in an older computer, like 6.

    You can use the Task Manager to kill the vmtoolsd.exe process that uses 100% of CPU.  To restart it, you run a command line like this:

    "C:\Program Files\VMware\VMware Tools\vmtoolsd.exe" -n vmusr

    The exact command line to run is located in the registry:

    HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run, VMware user process string value

  • Drag-drop Subvi on selected secondary

    Hi all

    I have an application where the user creates a 'follow-up' layout by dragging the desired data from the tree. In the front panel, I have several sub-panels allowing users to drag & drop data to any as they wish. Attached VI indicates similar stuff.

    However, deleting data, I can't filter what school must be used (in the vi attached, I try to move the data to the two sub-panels but even couldn't handle success that is) should be used to determine what school should show the Subvi (in this case, it is a waveform graph)? Filter mouse events? If I use the mouse enter, I can't use the event filter to drop at the same time.

    How can I feed the data, that are generated inside the second loop, while in these sub - VI that I loaded to the sub-panels? I have to do in case of timeout I suppose, but how can I join the Subvi from there then?

    Ask if you need more questions. Sorry for any possible incomprehensible sentence above

    BR, Palazzo

    Well Yes, there are many different options to pass data to the slot - loaded VI. At some point, you need to store the reference to the loaded VI and use this reference to manipulate the VI. Here's a quick and easy way to make using a local variable of the table:

    It is not very scalable and it certainly has a disadvantage right off the bat. This table will always grow and never get more small, so you'll get overlap VI references. It should still work, but if you kept Drag and drop you would possibly have a memory problem. With a few adjustments, you can solve this problem (specific table indices may be designated for each school, so clear you always the current reference to this specific location of table before loading the secondary).

    FYI, your 1ms waiting is too small. Isn't that nobody have CPU for this.

  • How to drag - drop in the windows photo gallery?

    All I get ts a red circle with a red line in it.

    Hi GeorgeDuncan,

    Are you aware of any hardware or software changes, prior to the beginning of the question?

    You cannot drag, drop or move the pictures in windows photo gallery, but you can do a right click in the empty space of the image window and use options such as group by, sort by, etc. to organize photos. You can even mark photos for storing photos

    You can also check out the link for more information on tags - below

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-organizing-pictures

    For reference:
  • Drag & drop doesn't work only in Internet Explorer

    I am no longer able to drag & drop something in Internet Explorer.  I often drag text to a search box or a box on a form.  This feature has stopped working.  As soon as I try to drag text highlighted my cursor becomes a circle with a line through it.
    Thank you.
    DC

    Hello

    What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
    machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

    If no joy there's something blocking perhaps.

    Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

    IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

    IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

    Close and restart IE or IE with no addons

    not better?

    IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
    "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

    Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
    are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

    Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
    are bad, but some can cause your question (toolbars are BHO).
    http://securityxploded.com/bhoremover.php

    Startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    Also get Malwarebytes - free - use as scanner only.

    http://www.Malwarebytes.org/

    --------------------------------

    Try these to erase corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Cannot find the combination of rollover image/button/drag / drop

    Hi all

    I use 9 Captivate and work of the interaction that left me speechless. I'm trying to put up with images that will be used for drag-and-drop interaction, and I want the images to have a rollover State to indicate that they are clickable. When you click on it, a display window that provides more information to the user to determine the correct items to drag and drop.

    I tried at first to use a regular image and then add a "Rollover" State, but then I couldn't understand how to assign an action to indicate when this State will come into force. (Is there a way to associate a hotspot of mouse with a picture?) Then I tried to use an image button, which worked very well in the measure where using the rollover State and I used some conditional formatting and the variables for my more info boxes to show when the item has been clicked. However, I didn't until I had finished this part that the buttons can be used as drag objects, OH.

    I thought to use an invisible on an image button so that I could get the most information to display and the image can still be used as a drag-and-drop object, but then brings me back to not knowing how to get the rollover State to work. :/

    Suggestions as to how I can achieve the Trifecta of turning State/button/drag / drop?

    You can not interactive objects as sources of drag or drop targets. Only interactive objects have the integrated rollover state that appears automatically when the cursor is on the object.

    Drag sources and drop targets also have InBuitl States, but turnover is not one of them. Take a look at this article to see all the Inbuilt says in & slipped:

    & Slipped in 2016 with Captivate 9 - Captivate blog

    States customized like the one you created for the object can only be triggered by an event. Rolling a normal object is not an event, which explains why you can not modify a report on working capital. Except, maybe (did not check) using the CpExtra of InfoSemantics widget (only for HTML output), which can be used as EventHandler (another widget to them for the SWF output).

    You can trigger an action when a drag source is dragged to a drop target, using stocks of the object (more: advice & slides - blog of Captivate ) but not before dragging you requested.

    At the moment I don't see a way to do what you ask (and this is the first time I see such a question in this forum). Must be D & D?

  • I have version 9.0.1 on 2 pc, both xp sp3. 1 the button "open new tab" is visible, on the other hand, the "Open new tab" button is not yet available in the menu "Customize toolbar" drag / drop. Why?

    I used the same setup file, but on 1 pc, the "Open new tab" button is available in the menu 'Customize toolbar' and can be dragged and drop on the navigation bar. On the other pc, the "Open new tab" button/icon is not yet available for drag / drop. I uninstalled firefox completely, including the settings and preferences, then reinstalled, but that has not fixed the missing button.

    Hello

    Please try to restore the default value in the Customize... window. If it is still not visible, one of the reasons could be that the button is already placed on the toolbar, but can be hidden behind a different icon or toolbar.

    ...............................................................................................................................

    Useful links:

    Everything on tools > Options

    Beyond the tools > Options - about: config

    Subject: config entries

    Information page (Alt + T) tools > Page Info, right-click > view Page information

    Keyboard shortcuts

    View without Plugins

    Files & Firefox profile folder

    Firefox commands

    Basic troubleshooting

    After the upgrade

    Safe mode

    Extensions of the issues

    Troubleshooting Extensions and themes

    Troubleshooting Plugins

    Test Plugins

  • Different drag / drop behavior of the mouse on different users on the same virtual machine Windows 10 Pro accounts

    I just upgraded to 8.1 on Mac OS X 10.11.3 Fusion "El Capitan" on a new iMac 27-inch 5K retina. The guest operating system is a new virtual machine Windows 10 Pro. I have two user accounts on the virtual machine, my local administrator account and another account local standard user. When I am logged into my account, I am able to drag and drop files to and from the guest to the normally Mac OS. As the mouse moves freely between the guest OS and the Mac. However, when I connect using the standard other account, I can't drag - move to and from the guest for the Mac OS. Also once I click into the virtual machine the mouse movement is limited to the virtual machine until I have press the buttons on the Mac to free the movement of the mouse to the Mac. I tried to uninstall and reinstall the vmware tools but the same behavior persists. Any ideas on a solution and why these two users accounts would act differently?

    Just phone with the help of VMware. They solved the problem in uninstalling and reinstalling VMware tools and change the following VMware Fusion preferences-> preferences-> General-> Gaming: to 'Never mouse optimize for games '. It has been set to 'always optimize the mouse for games '.  After that drag & drop, mouse movement works smoothly and perfectly now. Thank you VMware support!

  • When him drag / drop a page in a separate folder name by default is "Untitled extract Pages.pdf", how can I change this default name?

    Hello

    When him drag / drop a page in a separate folder name by default is "Untitled extract Pages.pdf", how can I change this default name?

    Thanks for any answers that can help!


    BR

    / H

    I could do this drag-and-drop in Acrobat 9 Pro, but it doesn't seem to work in Acrobat Pro XI.

    As try67 said, I have not found a way to have the use of the A9 a different name. On a Mac, because the destination folder is "just there" the most straightforward approach is to highlight the file Untitled Pages.pdf extracted, press ENTER, and then type (or paste) the new name.

  • Drag drop files always in temp\VMwareDND which is a symptom of the problem?

    I realized for the first time as the files that are Drag'n dropped from OS X to Windows VM apparently first go to ~ \Appdata\Local\Temp\VMwareDND.

    I noticed this only because:

    I dropped a WORD DOC file on the WINDOWS desktop.  I then opened it in MS WORD.  When I tried to make a BACKUP-from Word, the target folder that appeared in the Save dialogue was... \VMwareDND, no office!

    This DOC file is still in VMwareDND.

    Out of curiosity, I tried to drag / drop files more. These files later are NOT now in VMwareDND. But the first file I have slipped and fallen still exists in VMwareDND.

    Why does the first file in VMwareDND like the rest of the files?

    Was there a problem that the file has been copied from OS X to WINDOWS?

    Should I be worried that maybe the file was not copied correctly? This file was only a 5 page doc, but I am concerned about large binary files.

    Fusion 3.0.0 OS X 10.5.6 Windows Server 2008.

    Hello

    As the files that are drag ' n dropped go via the folder %TEMP% windows is by design.

    It also means that if you try to DND a file that is larger than the space available on the unit that contains only your temporary folder will fail to copy.

    If I remember correctly you can get around this by changing the file folder in your installation of windows to use another drive.

    In regard to the original not getting file not deleted, it is difficult to say. Don't have youby accident registered there in MS Word?

    It could be a bug that animates its not deleted in the temporary folder after copy successful using DND, but it is not a great problem because the temp folder is deleted when you select 'Disk cleanup' in the context menu properties under.

    There are also opportunities under profiles to delete the contents of the temp folder when you restart your guest.

    Hope this helps,

    --
    Wil
    _____________________________________________________
    VI Toolkit & scripts wiki at http://www.vi-toolkit.com

    Writer to the blog www.planetvm.net

    Twitter: @wilva

  • Can I just drag - drop all of a sudden?

    Hello

    I placed like the obects below (bcz I want to achieve throughput / flowed subforms), am a beginner, so I screwed up like below in the hierarchy, now bcz of reason (if I use as it is lower in 2nd page, the alignment is spoil), I want to spend all the nodes / 2nd page objects on the 1st page, therefore, to make quick & easy, think just drag - drop page 2nd red top-level node to the decline at the bottom of first page with the technique to hold cusrsor , pls let me know is safe / any precaustions (there are very very litttel JS)?

    My_First_Page1

    Subform

    Subform

    text field

    Subform

    text field

    just text

    Subform

    Subform

    text field

    Subform

    Subform

    Subform

    text field

    just text

    Subform

    Subform

    text field

    Subform

    Subform

    Subform

    text field

    just text

    My_2nd_Page2

    Subform = > can I drag / drop this top-level node to the bottom of page 1 St?

    Subform

    text field

    Subform

    text field

    just text

    Subform

    Subform

    text field

    Subform

    Subform

    Subform

    text field

    just text

    Subform

    Subform

    text field

    Subform

    Subform

    Subform

    text field

    just text

    Thank you

    In the hierarchy on the left tab, simply mouse click and hold, then drag it to anywhere in your page 1.

    If all your objust respect this subform, they will also. If any other subforms are on the same 'level' you would have to select them separately or pressed cntl and click to select multiple

  • Office file to the browser, drag drop / entry download

    Hello world

    I'm working on a project with drag and drop and im using jqeuryui for this.

    but I want the user to be able to drag a photo to the page and what it apears on the page in the browser (no upload fancy but just customer data)

    and also a button 'Download' but also using data (I won't use of node.js or any database for this project).

    can someone help me with a simple script for that? found a lot of scripts but all the required databases, I just want to keep things simple.

    then just a picture of snow from desktop to the browser and let that attend a div,.

    and an entry button to upload a photo and let that attend a div.

    local all simple.

    I'd like to hear a response.

    -Rob

    I made a model for drag drop download.

    Drag a picture on the box and it will appear in the browser.

    Demo: http://boermancrossmedia.nl/edgedragupload/dragdrop_file_upload.html

    Download a file and model: https://app.box.com/s/sl49v3fs0r0drqm2ix23

    Free to use.

    Maby preran, you can use it for the help page & tutorial?

  • Drag / drop function not available? Adobe XI

    We went just to XI of the 8. We use the drag and drop function to merge several pdf files. This function is no longer available? The only thing found was import the function 'insert pages' which is an extra step and seems to have trouble quickly. This function blocks for nearly 30 seconds, and then restarts. Any direction would be much appreciated.

    When you launch Acrobat 11, the splash screen has an element "Combine files to PDF" allows you to drag & drop files and rearrange easily. The same thing is available under: file > create > combine files into a single PDF

Maybe you are looking for

  • How can I sent apple an email

    all I want to do is inform apple I will never buy one of the products out there once again, they couldn't give me a free APPLE HATER FOR LIFE.

  • 7 Slate to a PC file download

    Since I installed a file manager on my Slate 7, I can view and use the downloaded files from my laptop via the USB port.However, when you open a window on my laptop showing the folder 'download' 7 slate, text files are not displayed on the window on

  • The coverage is not updated

    Hello I sent this podcast: http://www.ivoox.com/podcast-informativo-diario-upv-rtv_sq_f1259207_1.html to iTunes using this feed: http://www.ivoox.com/informativo-diario-upv-rtv_fg_f1259207_filtro_1.xml The cover image is ok (1600 x 1600 px). But I do

  • Is it not possible for me to duplicate my administrator account?

    My little brother uses my account, so I would really like that, if I could reproduce them so he could have his own. Is it possible if the account is the administrator?

  • Update WIndows 7 Office 2007 problems

    I am usng Windows 7 Ultimate and Office 2007 Enterprise, and whenever I try to install updates for Office 2007, I get "WindowsUpdate_00000646" "WindowsUpdate_dt000"Also, when I try to update manually, I get 'and not the expected version '.Any help wo