Do I have the recovery disc OK for Tecra A6?

Similar Questions

• Re: I lost the recovery disc 1 for Satellite P10

  Hi there, my son lost the recovery disc 1 for its Satellite P10.
  We got disc 2 (drivers) but no disc 1.

  Where can I get an another restore disc 1. and what it cost around.

  Post edited by: merdat

  Hello

  Usually you could order the ASP in your country, but I m not very well that if you will be able to order this disc because the P10 is an old notebook series and possibly the recovery discs are not more available for this model.

  However, you must contact the ASP in your country to get a confirmation.
  Maybe you are a lucky man and the CD is available.

  Good luck

• I'm getting "unmountable boot volume" and I don't have the recovery disc or a hard drive on my netbook Windows xp sp3 home.

  I'm getting "unmountable boot volume" and I don't have the recovery disc or a hard drive on my netbook.

  I tried to connect my netbook to a sony bravia tv and I pressed the power button to restart because it was so slow awakening of the mode standby
  I am running windows xp home sp3. What should I do?

  Hi samp2000,

  Follow the steps in this article to resolve the problem:

  When you restart your computer or upgrade to Windows XP, you receive the error message "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME".

• Impossible to get the recovery disc Vista for DV7-1020us notebook.

  I intend to install a new hard shore (750 GB) in my Pavilion DV &-1020us notebook. I use Vista 64 bit OS. Software does not offer me the possibility to make recovery disks. I can back up my files. The HP site says my computer does not recognize my serial number. I entered the serial number several times. The message I get is "HP is unable to find the desired page. To order Windows 8, a comprehensive program is of 90.00. The only CD that I have fallen on the Internet are to save the files. I appreaciate help on this.

  Hello

  You can order on the following site:

  http://www.computersurgeons.com/SearchProducts.aspx?SBT=dv7-1020US&BKM=results#results

  Kind regards.

• Help! Maybe I need the recovery disc for pavilion d4790y... + I think I messed...

  I had problems with my office for awhile now, think it might be a fan, virus, hard drive or ram as in my previous post... the computer would freeze/crash or not stop, requiring a firm hard. trying to reboot/restart computer, it would beep several times until I have let it sit for a few minutes, then everything was back to normal (found that might have been an error in the BIOS after all this happened)...

  Now, I have NOT touched or replaced all the components on my computer at all. Nothing! Now I have a debate on the upgrade of OS and RAM, but did not decide whether it was worth on this older machine. So I have done no amendment or change in software. the only change I made to it was not renew norton and goes with vast (free).

  The other day, it suddenly wouldn't boot Win Vista 32 in all. My monitor at startup (before config utility appears) had colored vertical lines across the screen. I immediately thought 'virus' or ' fan isn't card graphic blown is screwed/false driver downloaded... I enter safe mode with network, no problem with the monitor (no lines) and tried driver restore, but also to download nividia the updated. Nothing seemed to work except safe mode (s), system configuration, start the Setup program, CTRL I (don't remember which menu is), & screen of the system restore/repair/diagnose. I tried all the reboot thing pilots config, patterns of change (hard disk only), boot it. When you go to the splash screen (a back screen on startup), no line either... I tried the system restore, did not a thing... I tried the verification of diagnosis, all right... all equipment, the repair of the system did nothing...

  So I take the side box power off to check the components inside to see if any wiring was loose, fans not working/salty, etc... everything OK there besides fan a little dirty. Clean, same thing. Here comes the fun part...

  Now, I backed up all my files and 'backup' on my external hard drive... I thought that I had made the recovery discs or he had came with it when I bought it... I changed the configuration settings RAID0 by removing the old installation and turned to the raid no drives. Then, I created a RAID0 again... I guess you know where this is going...

  He said now insert the boot cd... Now, it of not anything but let me in Control Panel and change the startup preferences...

  I have no recovery disk or I can't find what happened if I have... with backup (for USB) external drives will not work... I kind of looking online hp without result and I saw some online, but that seems pretty shady, especially with the case of the OS...

  I will not buy another office, if I can help it, but I need to know if there is something I can do?

  Thank you

  .

  Hello:

  Yes, I've been able to do it once, but you also need an operating system installation disk. You need a USB FDD + OS installation disc and the correct drivers of course on the floppy drive.

  You can use a recovery for this drive yet. It must be an OS installation disc.

  Yes have ultimate could be a problem. If you enter your model number on this site of surgeons in the computer, you get a lot of options showing the recovery disks for different versions of the OS, but only had listed actually drives.

  You need to call HP and ask or email these surgeons computer guys and see if they have the recovery disc for ultimate games.

  Paul

• Can I use the recovery discs HP on a new SSD for HP Envy Windows 8?

  Hello

  I've owned my TouchSmart from HP ENVY 15 - j105sa Notebook PC, Ref. F5D08EA for a few months now and I would like to upgrade to an SSD Samsung Evo 840 (500 GB) HARD drive.
  
  I use the recovery disks that I created when I got the laptop to install the OS on the new SSD? I know that I could do it with previous versions of Windows, but with secureboot etc I do not know if this can be done with Windows 8, I know, it can be disabled in the BIOS, but I have the latest bios update for my laptop that I check regularly.

  Thanks for any help.

  The method the most painless way to do is to buy the new SSD as a migration kit.

  Migration kits are delivered with a USB to SATA data\power connector and cloning software.

  Recovery and recovery usb media discs games requires that the target disk is the same size or larger than the original. In using the method of migration (cloning) will show that a problem.

  It makes you, thank you.

• hp blue circle on black screen, can\ ' t access the boot options for the recovery disc

  I have installed Symantec disk full encryption and encrypted hard drive. Then I restarted the pc. I get a black screen with a blue HP logo in the Center. The low right sysa message press the ESC key for startup menu, but no key is working. Each button gets a beep. If I turn the power off, then on and press the various f keys, I get different messages but still no answer from all the keys.

  Symantec sent a disc of recovery for deencrypt the drive, but I can't get the pc to load from the drive. Any thoughts?. I reset the computer twice (battery and power cord, hold the power button / stop for 30 seconds)

  I remove the hard drive and then turn on the laptop to see what answer the BIOS.

  From your description of the problem, it sounds as if you may have encrypted the whole disc rather than only the C: volume or the BIOS ROM file is damaged.

  You should be able to go beyond the HP screen to access the BIOS.

  The BIOS should give complain that it cannot find a drive with a bootable operating system.

  If this happens, and you have the recovery disk set or usb recovery media, life is good and you will need to take a look at the Symantek forum to see how to proceed with your encrypted drive.

  If it does not then, the problem is the BIOS on the system board.

  By pressing the ESC key and have the start menu appear is conditional on the BIOS being in good condition. Yours may be damaged. Try download a softpaq BIOS on another PC, extract the BIOS ROM file and put it on the root of a usb key. Put the USB key into a USB port on the laptop. Press the power button and immediately hold down the Windows key and start receiving the B key. If it works and you see an led flash, release the keys and wait. the process must load a BIOS file to replace the one damaged. This takes time, so be patient if you see a blinking led or no reaction from the laptop for a few minutes.

  Post your results here and we can take the next steps, you can take.

  Best regards

  ERICO

• I have Windows Vista - I'm a msge saying that the recovery disc (D) is almost full. How can I transer to OS (C) Disk that has plenty of room to the left?

  I have Windows Vista.  I'm a msge saying that the recovery disc (D) is almost full.

  How can I transfer to OS (C) Disk that has plenty of room?    Thank you.

  Hello

  I'm sorry, but you cannot move the D: Partition recovery or its contents; It will not work if you do.

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. If you want to reinstall Windows from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  See you soon.

• Can someone tell me where I can get the recovery disc Vista HB UK version for Netbook HP 2140?

  Hello

  Can someone tell me where I can get the recovery disc Vista HB UK version for Netbook HP 2140?

  My HD became corrupted and if the recovery partition so I need to start from scratch.

  I don't seem to be able to get help online HP as all applications by email through to US and they can't help me.

  I hope someone out there can help please!

  Thank you very much

  Mike7P

  Wow!

  Sorry, you've got such clothing. I thought it was a professional laptop.

  That's what the site directed me to.

  If you know the number located on the sticker as well as the serial number of your product, you can order a set of discs of recovery on the link below by entering your product number there.

  http://www.best2serve.com/page/rcd_landing

  Also, I just discovered yesterday, if you can read your 25-character product key MS, you can do your own Windows Vista installation disc.  You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them (just before going forward with the actual facility) and they seem to work perfectly.

  Apparently, when you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-Vista-official-ISO-download-links-Digital-River.aspx

  After you install vista successfully, you can download the drivers you need your laptop support and driver page.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3872996&lang=en&cc=us&TaskID=135&prodTypeId=321957&prodSeriesId=3872994

  Best regards

  Paul

• Reinstall Windows 7 - laptop does not come with a disc or I do not have the recovery partition, all I have is the product key

  Hello

  I am running windows 7 Professional on my laptop. I need to know how to format and re install the operating system. My laptop does not come with a disc or I do not have the recovery partition, all I have is the product key. I would also like to know the pilots.

  Kind regards

  Aty.

  Former title: reinstalling Windows 7

  Well, your only option is to get the Windows 7 Home Premium disc by following the instructions that I described in the following article:

  How to: What are my options for Windows 7 reinstall media?

  Then follow the instructions to retrieve reinstall them:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

  But before you do, make sure that you get the Windows 7 Professional product key if you need to reapply in the future:

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)

  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features

• I want to install a new hard drive and I don't have the installation discs for Windows, is it possible to get my old copy of Windows as a download?

  Help download windows on old laptop but I have a problem...

  I have an old laptop that I want to install a new drive hard in and I don't have the installation discs for Windows, is it possible to get my old copy of Windows to download so I can fix it this thing? I have my code produces the thumbnail but no physical copy of the Install disks.

  Unfortunately, there is no download of Windows Vista available bits.  Please see: How to replace Microsoft software

• Could not find the recovery disc for my laptop

  I'm buying for my Presario CQ50-209WM laptop recovery disks.  When I go to the software/driver download page and click on the Vista recovery disc, it is not available.  How to get the recovery disc for this laptop.

  Thanks for any help.

  Peg

  These links are dead to 99% of the numerous times, reported, several times.

  Contact HP you Chat, email and phone options here. Personally I had good results with the cat.

• I don't have the installation disc for my copy of the student teacher CS5 extended and I do not know which files I have to download for installation?

  I don't have the installation disc for my copy of the student teacher CS5 extended and I do not know which files I have to download for installation?

  The difference between the student-to-teacher and regular versions lies in the license.  The software is the same.

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

• What should I do if I want to format my laptop but I don't have the recovery

  Hello

  I have a Toshiba Satellite Pro P100, about 5 years ago I bought it.

  Here is the story, I want to format my laptop but I don't have the recovery or Installer Windows Vista DVD disc, the operating system is pre-installed when I bought it. I know that I can download all components/drivers Toshiba Support page. But how I format without Installer Vista? I have the vista product identification number, so I wonder it works if I format it with vista ungenuine copy, but key ID I have to run it?

  Thank you very much. All solutions would be very appreciated.

  See you soon
  Wolf

  Satellite Pro P100 is old model laptop and I do not remember if this model was delivered with or without recovery DVDs. It turns out that all the models shipped without installation disc recorded on HARD drive data recovery and computer laptop owner is able to install this recovery image using HARD drive recovery facility.

  Second option was using recovery DVD creation preinstalled Toshiba recovery disc creator tool. How it works and how to start the HARD drive recovery is described in s manuals that you got with your laptop computer in pdf format. You can also download manuals of this Toshiba support page - http://eu.computers.toshiba-europe.com > support & downloads.

  So what you can do like the first, is to check if can begin installation of HARD drive recovery.

  Otherwise, you must install OS using the Microsoft installation disc. As you already know, all of the drivers needed, tools and utilities that you can download at Toshiba supports the page.
  Microsoft product key that you saw at the label belongs to the version of the OS pre-installed and cannot e used for activation if you install OS on your own.

• Re: Tecra M9 - using the recovery disc

  Hello, can someone please help.

  I don't have a model Tecra M9. PTM90E-05700WEN serial No. Y76875H professional XP operating system.

  The problem I have is as follows - I would like to reset the machine back to factory settings, I have the product recovery disc that came with it as well as the Microsoft Office Basic 2007 license key.

  Instructions on the cover of the album simply say "insert the first disc in the drive and turn off the computer. Turn on your computer while keeping the F12 key. Use the cursor keys to select the optical disc drive in the menu. Follow the who make their appearance on the screen. »

  Problem # 1 - I only have one disc, I can certainly say that I have lost. instructions refer to "first record suggesting there is more than one. The disc I have is clearly marked "product recovery". There are some numbers on the disc namely - GMR400776EN0 and also SD124219 of CD.
  The disc is also clearly marked Microsoft Windows XP Professional.

  Problem # 2 - when I make the instructions above, nothing else that the system starts normally. I can assure you that I am pressing F12 before the opening of Windows.

  I don't get the option to select anything and even less the optical disk drive. I tried several times but always the same result.

  Otherwise, I've tried - using the F8 key button brings up options menu, ie SafeMode etc etc work, but nothing referring to fix the computer.

  Press and hold 0 then that until the computer starts.

  Best regards and many thanks

  Hello

  Tecra M9 is older model laptop so method with F8 or zero will not work.

  The instructions are nothing else than the General instructions and not written for your Tecra M9 only. Recovery image is not the same for all models of laptops. They are so different with some laptops, there is a disc only, but with some models, there are two disks.

  I believe you when you say you've got a disc only.
  How to start recovery disc installation there are three methods:
  -Start Notepad and enter the BIOS settings > change the boot order and put the CD/DVD drive as the first boot device.
  -key c close several times to start laptop. This will force the optical disc drive to be the first boot device.
  -start your laptop and press F12 repeatedly to enter the boot menu. Place the recovery disc into the optical disc drive, choose the CD/DVD drive and press ENTER.

  Please test all these methods and send feedback.