Do I have to re install Windows 7 Ultimate Retail Version over the current version of Windows 7 Ultimate OEM "Trial"?

Similar Questions

• I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have a hard drive. At least two partitions. C: 74.7 GB with 63.3 freespace
  D: 74.2 GB with 70.6 freespace
  These are my original specifications of the hard drive: 160 GB (7200 RPM) SERIAL ATA HARD DRIVE WI
  So I suspect there are at least one or more partitions hidden leaving 11.1 GB for hidden partitions!
  Windows is present on both drives C: & D:. In the directory windows on C:, the oldest entry is 19.12.12, 21.43 last 21.12.12, 22.50
  The first entry in the directory windows on D: is 19.12.12, 18.42 the last 21.12.12, 22.40
  I hope that makes sense to someone, any help gratefully received!

  As long as you have verified you dΘmarrez done on the c: / partition, Yes, you can reformat the drive D: / partition using Windows 'disk management '.

  J W Stuart: http://www.pagestart.com

• I too have a problem installing windows error1601. I went through the steps to get services and found that this installer of windows is gone. How can I get that back?

  I too have a problem installing windows error1601.  I went through the steps to get services and found that this installer of windows is gone.  How can I get that back?

  Try to run the Windows Installer Cleanup http://www.softpedia.com/get/Security/Secure-cleaning/Windows-Installer-CleanUp-Utility.shtml utility to see if that solves the problems with windows install.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have a pre-installed windows 8 pro in my VAIO E series and I had no problem with it until he says I need to activate the key...

  I have a pre-installed windows 8 pro in my VAIO E series and I had no problem with it until he says I need to activate the key. How will I know about the activation key if I don't have the CD? and he really gets on my nerves because very 15 minutes it would display the message that I need to activate the key making delays in my work.

  Hi Kia,

  We apologize for the inconvenience caused to you.

  I wish you contact the Sony Support to reactivate the windows because it's preinstalled software.

  http://eSupport.Sony.com/us/p/select-System.pl?Director=FAQ

  Please reply with the status.

• I have problems to install CS6 Design & Web Premium. From the CD, the Setup program crashes or he tells me it's a forgery (it isn't). In the Web download file, I can't even extract. I get an error of access violation.

  I have problems to install CS6 Design & Web Premium. From the CD, the Setup program crashes or he tells me it's a forgery (it isn't). In the Web download file, I can't even extract. I get an error of access violation. I'm on a Surface Pro Windows 3.

  Solution posted in duplicate message I'm having various problems installation CS6 Design & Web Premium. From the CD, the Setup program crashes or he tells me it's a forgery (it isn't). In the Web download file, I can't even extract. I get an error of access violation. -This message of locking... MOD

  To contact our support staff, you must click on the following link: https://helpx.adobe.com/contact.html

  In at top right, sign in to adobe.com with your Adobe ID

  Select the category of assistance you need and once completed, you will see the blue band that still says "need help, contact us.

  A click on that and you should see options to chat/phone.

• You can install the Linksys EasyLink Advisor update over the current version?

  I was informed of a new update for Lela, Lela-3 - 11.9139.94.  I saved the download of a file.

  My question is this: before installing the new version, should I uninstall the current version 3.0?

  I just had the router working properly and don't want to spoil anything.

  Hello Morse, before installing the new version, just uninstall the current version, you must avoid problems because it will not update your old version.

• I have a pre-installed Windows Vista Home Basic SP1 on a computer. But I discovered that certain system files are corrupt and could not be updated.

  The error code is 800b0100 when he tried to update. Updates were the .net framework 3.5 SP1 and the upgrade to SP2. I ran the System File Checker, and the result is corrupted system files, but could not be repaired. The content of the log files is as below:

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2009-11-19 00:47

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB948609_client_1~31bf3856ad364e35~x86~~6.0.6001.3053.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB948609_client~31bf3856ad364e35~x86~~6.0.6001.3053.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB948609~31bf3856ad364e35~x86~~6.0.6001.3053.mum

  Control components store

  Summary:
  Seconds executed: 3579
  Found 3 errors
  CBS MUM lack count: 3

  Unavailable repair files:
  servicing\packages\Package_for_KB948609_client_1~31bf3856ad364e35~x86~~6.0.6001.3053.mum
  servicing\packages\Package_for_KB948609_client~31bf3856ad364e35~x86~~6.0.6001.3053.mum
  servicing\packages\Package_for_KB948609~31bf3856ad364e35~x86~~6.0.6001.3053.mum
  servicing\packages\Package_for_KB948609_client_1~31bf3856ad364e35~x86~~6.0.6001.3053.cat
  servicing\packages\Package_for_KB948609_client~31bf3856ad364e35~x86~~6.0.6001.3053.cat
  servicing\packages\Package_for_KB948609~31bf3856ad364e35~x86~~6.0.6001.3053.cat

  and the second log file is:

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2009-10-05 14:49

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB948609_client_1~31bf3856ad364e35~x86~~6.0.6001.3053.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB948609_client~31bf3856ad364e35~x86~~6.0.6001.3053.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB948609~31bf3856ad364e35~x86~~6.0.6001.3053.mum

  Control components store

  Summary:
  Seconds executed: 1509
  Found 3 errors
  CBS MUM lack count: 3

  Unavailable repair files:
  servicing\packages\Package_for_KB948609_client_1~31bf3856ad364e35~x86~~6.0.6001.3053.mum
  servicing\packages\Package_for_KB948609_client~31bf3856ad364e35~x86~~6.0.6001.3053.mum
  servicing\packages\Package_for_KB948609~31bf3856ad364e35~x86~~6.0.6001.3053.mum
  servicing\packages\Package_for_KB948609_client_1~31bf3856ad364e35~x86~~6.0.6001.3053.cat
  servicing\packages\Package_for_KB948609_client~31bf3856ad364e35~x86~~6.0.6001.3053.cat
  servicing\packages\Package_for_KB948609~31bf3856ad364e35~x86~~6.0.6001.3053.cat

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2009-11-18 23:53

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB948609_client_1~31bf3856ad364e35~x86~~6.0.6001.3053.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB948609_client~31bf3856ad364e35~x86~~6.0.6001.3053.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB948609~31bf3856ad364e35~x86~~6.0.6001.3053.mum

  Control components store

  Summary:
  Seconds executed: 1237
  Found 3 errors
  CBS MUM lack count: 3

  Unavailable repair files:
  servicing\packages\Package_for_KB948609_client_1~31bf3856ad364e35~x86~~6.0.6001.3053.mum
  servicing\packages\Package_for_KB948609_client~31bf3856ad364e35~x86~~6.0.6001.3053.mum
  servicing\packages\Package_for_KB948609~31bf3856ad364e35~x86~~6.0.6001.3053.mum
  servicing\packages\Package_for_KB948609_client_1~31bf3856ad364e35~x86~~6.0.6001.3053.cat
  servicing\packages\Package_for_KB948609_client~31bf3856ad364e35~x86~~6.0.6001.3053.cat
  servicing\packages\Package_for_KB948609~31bf3856ad364e35~x86~~6.0.6001.3053.cat

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2009-11-19 00:47

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB948609_client_1~31bf3856ad364e35~x86~~6.0.6001.3053.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB948609_client~31bf3856ad364e35~x86~~6.0.6001.3053.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB948609~31bf3856ad364e35~x86~~6.0.6001.3053.mum

  Control components store

  Summary:
  Seconds executed: 3579
  Found 3 errors
  CBS MUM lack count: 3

  Unavailable repair files:
  servicing\packages\Package_for_KB948609_client_1~31bf3856ad364e35~x86~~6.0.6001.3053.mum
  servicing\packages\Package_for_KB948609_client~31bf3856ad364e35~x86~~6.0.6001.3053.mum
  servicing\packages\Package_for_KB948609~31bf3856ad364e35~x86~~6.0.6001.3053.mum
  servicing\packages\Package_for_KB948609_client_1~31bf3856ad364e35~x86~~6.0.6001.3053.cat
  servicing\packages\Package_for_KB948609_client~31bf3856ad364e35~x86~~6.0.6001.3053.cat
  servicing\packages\Package_for_KB948609~31bf3856ad364e35~x86~~6.0.6001.3053.cat

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I replced my hardrive & now I have to re install windows vista. How to find this & download on my pc?

  My hard drive died & I had to replace it & I don't have a disc with my laptop when I bought it. I need a copy of windows vista (my laptop is a 2008) & internet Explorer. I have

  SANDUS

  Hello

  What is the brand and the model number of your computer?

  I suggest you contact the OEM of your computer manufacturing and check.

• How and where can I buy a product of re - install Microsoft windows 98? My compputer says I have to re - install Windows.

  I am told by the computer to reinstall Windows.  Is what other alternative there in addition to buying a new computer?  I would try to re - install to access my files.

  Windows 98 is obsolete and is no longer available.  You buy a new computer that comes with Windows 7 preinstalled. Carey Frisch

• I have just re-installed Windows Vista and I can't find all the files he supposedly saved.

  I recently reinstalled vista (yes I know I should have bought mac) in any case I can't find all the files I've supposedly saved. any ideas? Thank you

  original title: Reinstall vista

  Hello

  You don't say how you have reinstalled or how or where or by which program or process, you saved your data...

  A relocation normally will wipe away the old operating system and all data during the resettlement process.

  You can try this free program to see if it can recover your data:

  http://www.Piriform.com/Recuva

  See you soon.

• I have a problem installing my new printer, it says that the printer is not compatible with XP, I can do to fix this? Are suggestions?

  It's a printer Epson SX130.

  Hello

  1. What is the exact error message?

  2. you have Windows XP Service Pack 3 installed on your computer?

  Method 1:

  See the link below:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_setup_indirect_printer.mspx?mfr=true

  Method 2:

  Download the latest drivers for your printer:

  http://www.Epson.co.uk/store/Printers-and-All-in-Ones/Epson-Stylus-SX130/drivers-support#.

  For reference, you can check the links below:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  http://support.Microsoft.com/kb/308028

  Hope this information is useful.

• Every time I have to connect to Windows 7, says bad trial user or password but the next attempt to work

  New Windows 7 install. Set up the login admin PW. Whenever I have connection, the first test says wrong user or PW. The next test (no change (caps lock, etc.) this works.) Weird!

  Any ideas?
  * original title - transient Windows 7 lockout *.

  Hello

  I suggest to change your windows password and check if the same problem occurs.

  Change your Windows password: http://windows.microsoft.com/en-us/windows7/Change-your-Windows-password

  For your reference: Troubleshoot Windows password problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Windows-password-problems

  (For Windows 7)

  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-problems-with-logging-on-to-Windows

  Hope this information is useful.

• I need help, I have tried everything! Network controller after you have installed windows 7 on a windows 8.1 machine!

  Hi all!

  I have a Dell Inspiron 3521. It was 8.1 on Windows and I installed Windows 7 Pro OEM 64 bit. I delete the old file of windows. I was able to install all the drivers from Dell Web site, but I can't seem to find a way to get the right driver for the "network controller". I have tried driver identifier and it shows me two missing drivers: 1: BCM43142A0, 2: network controller.

  This is the ID of the MDO of material:

  PCI\VEN_14E4 & DEV_4365 & SUBSYS_00161028 & REV_01
  PCI\VEN_14E4 & DEV_4365 & SUBSYS_00161028
  PCI\VEN_14E4 & DEV_4365 & CC_028000
  PCI\VEN_14E4 & DEV_4365 & CC_0280

  I found a post with someone who has the same keys, but the driver in the link did not help me. Maybe it's the way I installed the drivers? Or how I installed windows 7?

  Help, please!

  The last Reference Dell driver for the Dell Wireless 1704 map is 6.30.223.228. You can also try the later card Dell Wireless 1708 6.30.223.245 (both are adapted Broadcom drivers) first directly and then in Device Manager.

• I have just re-installed you Bird - now my stars are not more gold!

  I have recently re-installed Windows 8.1 requiring a reinstall of you bird. Before that, the stars were gold and they stood out. Now, they are just grey. How can I fix?

  Windows 8.1.2, you Bird 31.4.0.

  Thanks in advance.

  Sparky

  You can mark the thread as "Solved" Please?
  Thank you.

• Portege 2000 - how to install Windows XP without ODD and FDD?

  I have this Toshiba Portege 2000 old OS crashed a few days ago. This laptop is not an optical drive and a floppy drive.

  The first thing is mind is to purchase an external optical drive which I did, but it does not seem to boot from it. I have trouble to install Windows XP but nothing helped.
  Can you guys please help me?

  The last option I have in mind would be to install Windows XP on a network. The portege 2000 is able to boot from PXE, the thing is that I don't know how to do it! Can someone tell me how to boot from PXE?

  Thank you very much.

  I don't know Mr. but as far as I know if copy you the Windows XP CD to HARD disk and then you start from external floppy drive (it should work) you can start the installation.
  Copy the XP CD to your HARD drive with a drive enclosure external DRIVE on another computer, create a boot floppy XP and start from it.
  Go to the I386 folder and start the WINNT. EXE

  Or you use the CD/DVD drive from another computer with the netbootdisk. I found this with Google:
  http://netbootdisk.com/