Do I need two drivers Synaptics & ALPS to get the touchpad working?

Similar Questions

• Lost the CD and the series, need to know how I can get the serial number of the system's installed Adobe Acrobat software

  Need to know how I can get the serial number of Adobe Acrobat software installed in the laptop

  Ask your Adobe Acrobat serial number

  It would be imprudent of me to ignore the obvious - maybe Adobe can help! Depending on how, when and from whom you have purchased Adobe Acrobat, you can contact Adobe and get the serial number of your Acrobat from them.

  Visit the page Adobe find the serial number your quickly for assistance.

  Or you need to dig up your Acrobat serial number and manually decrypt!

• Need two drivers of Windows XP Home for my Satellite A100 (PSAAN)

  Hi guys,.

  I am experiencing a small problem, I recently bought a second hand satellite A100 (laptop and charger only), that came preloaded with Vista home premium. the problem is that I need to run Windows XP on this machine.

  So I did what anyone else would do, I formatted the machine, but not knowing that the disk contained the necessary drivers. So now I have loaded WXP, installed all the drivers in the support section, but now I'm looking for two drivers:

  (1) the "biometric coprocessor" and
  (2) audio driver modem high definition...

  Any idea where I can get these?

  Thanks in advance

  Hello

  All the XP drivers are published on the page of Toshiba. But the proper installation order is the key!
  Please choose your laptop in the form driver of Toshiba (PSAAN) download and install all the drivers available in the right order.
  The installation instruction was also published on this site! Simply follow these guide lines!

  I think that the two missing pilots are chipset and modem driver!

• I need to download creative cloud to get the free trial version of photoshop?

  Whenever I have download the free photoshop trial it just opens creative cloud. When I go to log in creative cloud if it says I was disconnected and I need to connect to continue even if I come to me. She does it every time. Help!

  Hello

  using to download a free trial or buy Adobe products | Downloads of Adobe you will see two ways:

  1. Select one of the applications below to download a free trial version.
  2. Ou Sign up for your free trial of creative cloud to get access free to all these applications, mobile applications, web storage, and more.

  Hans-Günter

• Need to get the bluetooth works on Dell Studio xps 1640 after upgrade to Windows 8

  I upgraded my Dell Studio xps 1640 to Windows 8. Since then, I've never used Bluetooth, I was not concerned that my bluetooth software was not compatible.  Now, I've found a use for Bluetooth and I can't update my driver because when I try to download the driver I get the error message no bluetooth is detected.  I know that Windows 8 turned off the Bluetooth because of the lack of compatibility, but now I find myself in an enigma. How to Bluetooth if it does not appear?

  YAA dude, I have encountered the same problems with my studio xps 16, tried many things.

  Well, you can try to download the new driver dell wireless bluetooth dell Web site 4.0 module, go to Alienware laptops and look for driver windows 8, will file with a name of "Comm_Broadcom_Win8_X04_A01__Setup-39W36_ZPE", about 170 MB.

  It worked on my Studio XPS...

  Concerning

  Sundeep

  
  http://www.Dell.com/support/drivers/in/en/indhs1/product/Alienware-M18x-R2?s=DHS

  a quick link for you, change to 64-bit windows 8, go to download and communication.

• Need two drivers for my Satellite L850-13R

  Hello

  I have the problem with the 2 drivers (I have no drivers for):
  1 PCI simple communication controller
  2 unknown device (location: on system compatible ACPI Microsoft)
  Operating system is Windows 7 Home Premium 64-bit

  Thank you!

  Can you identify the two devices by following the advice on http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78?

• need sata drivers to format text for the installation of windows

  hey im trying to reinstall windows on my dell xps 700 desktop computer but I need drivers sata for the instalation disc (I do not have the supliet a dell me with) and I'm using nlite for this but I can't find the drivers for it I need the driver to be in textmode as nlite called someone can please help me with a download link for the drivers

  I have now completed the installation and it worked smoothly so now I just need to some drivers can any of you guide me? I don't have an Office exept empty the trash so I need some internet for beginners

  http://www.Dell.com/support/drivers/us/en/19

  For best results, put in your Service tag.  Otherwise, "choose from a list of all products Dell" > Desktops > XPS > XPS 700 Jet Black

  Read this first http://support.dell.com/support/topics/global.aspx/support/kcs/document?c=us&cs=19&l=en&s=dhs&docid=DSN_1A0C0937D62A8739E0401E0A55174744&isLegacy=true

  If there is a choice of different drivers (for example, the categories of video and audio), you should do one or more of the following to determine that you actually have material:

  1. use your serial number instead of looking for your computer in the list of all Dell products.
  2. glance in the Device Manager (start > run > devmgmt.msc > OK)
  3. look in system information (start > run > msinfo32.exe > OK)
  4. open your computer and determine the make and model of the control card

• Desperately need help with win XP Edition family, I need to update my PC but get the error message "cannot connect to the server.

  I need to update my pc, I have windows xp home edition. I had sp2 on my computer, but my system crashed almost and I had to do a total system recovery and it removed my files. Tried to download again, but I can't. I get error could not connect to the server. I have no virus or worms and checked each article are saying sp1 kb. I can't update the Explorer or anything like that

  Follow the links in this article to download the Service Packs from Microsoft.  You can download on another computer if necessary and move them to your machine to update.

  "How to obtain the latest Windows XP service pack"
    <>http://support.Microsoft.com/kb/322389 >

  HTH,
  JW

• Need to activate windows 7, but get the error 0xC004C020 code

  I need to reinstall the OS system, but when I did I get a pop up window that says unexpected error code 0xC004C020 the key code is pass many times, it can be activated. I never had this problem before, but it's only one of the problems that happens with this problem. The others are with Media Center, you try to use Netflix will not play instance movies keep getting script error 50 line, oh I only have half of gimp too when I install it. No one knows what to do with it.

  See this article, it seems you need to do a phone activation:

  http://support.Microsoft.com/kb/938450

  After graduating from active Windows, you can work on the following problem.

• Windows Update, sent the 16/10/2009 stops HP Total Care of work, need to do system restore to get the programs to work.

  Do system restore to get the programs to work. programs worked fine until Windows updated 10/16/2009

  Never, EVER use system restore to 'Cancel' an update, Windows Service Pack, or upgrade of IE! If you feel that an update is the cause of a problem, first uninstall the update. If the problem persists, then you can try the system restore.
  
  Please indicate your full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7 RTM) when you post in a forum or a newsgroup.

  Can you tell us what updates have been installed?

  Have you contacted HP Support about this? ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Whenever I try to install these two windows automatic updates, I get the 8024200d error code

  I try to install the KB943411 and KB933928 updated, but I get the 8024200d error code. I'm running on Vista Ultimate (without SP1), and I do it through Windows Update.

  Hi BobTheDude,

  I suggest you to follow these steps and check if it does the work for you:

  ·         Follow the resolution 2 in the article
  http://support.Microsoft.com/kb/947366

  ·         Download and install the latest Windows Vista application compatibility update in the link mentioned below:
  http://support.Microsoft.com/kb/963699

  ·         Rename the Catroot2 folder

  To rename the Catroot2 folder, follow these steps:

  1.	Click Start type cmd and then click OK . Right click on cmd and then click run as administrator .
  2.	At the command prompt, type the following commands and press ENTER after each line: net stop cryptsvc Ren %systemroot%\System32\Catroot2 oldcatroot2 net start cryptsvc output

  ·         Empty the software distribution folder

  1.	Click Start type services.msc , and then click OK . Click right services.msc and then click run as administrator .
  2.	In the Services (Local) pane, click automatic updates , and then click stop .
  3.	Reduce the Services (local) window.
  4.	Select all the contents of the Windows distribution folder, and then delete them. Note By default, the Windows distribution folder is located in the drive : \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.
  5.	Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
  6.	In the Services (Local) pane, click automatic updates , and then click Start .

  ·         Disable security software

  ·         You can download and install the stand-alone package includes updates that failed
  KB943411 - http://www.microsoft.com/downloads/details.aspx?familyid=A7BB4622-FB21-4769-B29A-7FC7A07D182A&displaylang=en

  KB933928 - http://www.microsoft.com/downloads/details.aspx?FamilyId=DC2AD07B-D5D7-407A-9A0E-3F3D142682D0&displaylang=en

  Please let us know if it helps.

  Thank you and best regards,
  David

• How can I get the drivers for xp usb / get the device can run faster in the listed ports

  POP UP WITH SAYING HIS DEVICE CAN RUN FASTER IN THE PORTS LISTED, I HAVE THE WIRELESS CARD WIRELESS, MOUSE AND SPRINT U600, CONNECTED TO THE LAPTOP, THE PROBLEM JUST STARTED

  See the discussion of the difference between USB 1.1 and USB 2.0 and why this error message http://ask-leo.com/what_does_the_usb_device_can_perform_faster_mean.html
  If you have an old computer, you do not all USB 2.0 ports or some of your USB ports may be 1.1 e.a. 2.0

  Open the Device Manager (start > run > devmgmt.msc > OK) and expand the "Controllers of Bus USB" section by clicking on the + sign to the left.

  Are there warning icons? If so, provide details

  It will probably take several entries for "PCI to USB Host Controller" or similar terms.  Please report if one (or several) of these entries are for a "PCI to USB Enhanced Host Controller.  If none of the USB controllers is "strengthened", you do not have USB 2.0

• I wiped and recovered from my CD of my operating system to windows XP due to a virus, now my system XP is SP1 (version 2002) and needs to upgrade, how can I get the old updates please?

  I am operating windows XP, but it is more difficult to download anything, I can only assume its because my system recovery disk brought me originally pack 1 and missing essential items in my system which is used to enable automatic updates to work to get my system back to normal.

  Preliminary work:

  Download the installation files of SP3, IE8 and Microsoft Security Essentials, which is an effective antivirus/antimalware program. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links to all the installation of three files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials (for MMS)

  1. physically disconnect from the Internet. Also unplug all unnecessary devices!

  2. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  Select "Turn off automatic updates" and click OK.

  3. install the SP3. Restart TWICE.

  4. switch to IE8. Restart TWICE. (Note: it is important to let IE at the level before the upgrade to SP3 IE6.) After you are in SP3, then you can switch IE6 to IE8).

  5 install MSE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  6. make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  (Now you can physically reconnect to the Internet. Update Antivirus program.)

  7. visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  8. reactivate the automatic updates.

• I paid and downloaded pro adobe acrobat but it turns out that its an upgrade, so I'm stuck. I need help to know how to get the program that I really need.

  Very frustrated, I can't speak to someone for this sort. Any help would be very appropriate.

  We were given the link of our designers and it's just an upgrade and when I came to install it request the previous version serial No.. We have not all previous versions, we cannot go past this stage.

  Is there a contact center that I can talk to?

  Thank you

  Amanda

  Hi Sally,

  I recommend you contact customer service regarding this issue.

  Kind regards

  Rahul Tyagi

• Need help to remove CS4 when getting the error: the required files are missing

  Attempt to delete CS4 turned off my computer.

  The uninstall program will not start on any program - I get an error indicating that the required files are missing to launch the programs.

  Anyone know a work around? I know I can drag files of applications to the trash, but I want to get everything in all areas of the computer, since I am recovering used HD storage.  I'm on a Macbook, OS 10.10.2

  Thank you

  Scott

  Irrelevant. Your installation is never worked first place right after the upgrade to 10.10... Simply trash the files.

  Mylenium