do I pay my device external hard drive toshiba properly installed but that does not appear in my computer?

do I pay my device external HDD toshiba usb 3.0 installed correctly but that does not appear in my computer?

Advertisement

Hello

Please post your question on the French forum.  Thank you.

http://answers.Microsoft.com/fr-FR/Windows/Forum/hardware?TM=1366324404146

Tags: Windows

Similar Questions

  • WD5000AADS 500 GB hard drive. Windows XP Device Manager says it is installed and working properly, but it does not appear in my computer. Help!

    The disc was an external USB disk, but the fitting broke so I took off the adapter and I try to use it via its native SATA connectors. The disc is spinning and the computer know when it starts in Windows XP. It says new hardware found and go through the installation process. Windows finishes the installation, and says that everything is good with the world. I look in Device Manager and it says "this device is working properly" when I click on the drive properties. THEN..................... I click on MY COMPUTER and viola! No. DRIVE shown where the WD5000AADS should be there. There is nothing except my C: drive and my CD - DVD players.

    There are a few important (to me) information on this drive and I need to do.  HELP Please!

    Thank you

    twoiron

    Hi twoiron,

    • You are able to access the other USB devices on the computer?

    See the link below and run the Fixit tool available, check if it helps.

    A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

    http://support.Microsoft.com/kb/925196

    If him above fails tool Fixit check if the player is detected in disk management and has a drive letter assigned.

    To open disk management

    (a) from the start menu, click Run.

    (b) in the Open box, type diskmgmt.msc, and then click OK.

    If the drive is detected in disk management and the drive letter is missing, then assign a drive letter to the drive and check if that helps.

    How to change drive letter assignments in Windows XP

    http://support.Microsoft.com/kb/307844

  • USB port recognizes the location of my external hard drive as F:. Why it does not recognize in the correct order as E:?

    This question is requested based on certain issues I'm having with the Zune software. specifically in the software of pointing to the correct location for listening to music I own that was torn through CD. Currently, all the added music in this way shows the location of each song as E: in the properties of the song. I went back to the score zune software to the right location (for example settings-online collection => by adding the name of the place where the music.). The negative result is that I can't play full songs for music I own. Instead, Zune software plays the second.30 preview for each. Is this a problem of Zune, Vista or Western Digital external drive problem? Why Vista would recognize the location of the reader out of sequence. Please notify. Thank you

    Hi Freddie,.

    You can try to change the E: drive letter and check.

    For more information, you can consult the following article:

    Change, add, or remove a drive letter

  • HARD drive toshiba px1267e - 1 g 32 does not

    I got my drive HARD Toshiba PX1267E - 1 32 for about 18 months, and it worked fine. However, all of a sudden it has stopped working, it is no longer appears on my desktop. Previously, it was password protected, and the password box will appear first. When the password has been accepted it would perform a scan of the drive and I would be able to as I wanted. I have not updated anything on my PC or nothing changed in my knowledge, then why is no longer usable? The password box is not also be displayed, I am unable to find the disc that came with it.

    I am running XP.

    Please help as there is a considerable amount of data out there that I can't access.

    Hello

    I found an interesting announcement of master of Desaster under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=126217

    Please check it out!

  • Drive external DRIVE does not appear in my computer

    Windows says new hardware detected... your new hardware is installed, but it does not appear in my computer. No drive letter is assigned.

    Can anyone help?

    Do you use an external USB HDD? Does a job on another computer?

  • Toshiba Canvio Basics HARD drive does not appear in my computer

    Hello

    I have a HDTB110AK3BA - Toshiba 1 TB Canvio Plus Portable Hard Drive for storage 3.0 Basics and the computer will allow it to connect, but it does not appear in my computer / pc is in Device Manager thought but not my pc

    Please help and Windows 7 or windows 8.1 PC do the same thing.

    Hello

    I found the description of the product of this external HARD disk:

    Product features:
    • USB 3.0 - powered portable add-on storage.
    • Voltage of bus capable USB, no need for AC adapter.
    • Easy to use with no software to install.
    • Adapts to large digital files with spacious storage capacity.
    • Protect your drive (internal shock sensor and ramp loading technology).

    Specifications
    • Capacity: 1.0 TB
    • Interface: USB 3.0
    • Transfer rate: up to 5 Gb/s
    • Speed: 5 400 rpm
    • Average access time: 12ms
    • Cache buffer: 8 MB

    It is a HARD USB 3.0 drive. No doubt the HARD drive is not recognized correctly in windows exploerer due to the low power.
    The USB 2.0 port common feeds only 500mA. The USB 3.0 device must be able to 900mA.
    Therefore, it would be advisable to connect this 2 ports USB 2.0 HARD drive with a USB Y cable

  • How can I remove restrictions file from an external hard drive so I can view or access these files on any computer instead of just one file has first been created?

    I have an external hard drive that I loaded all my important files on all my computers. There is a file that I put in place restrictions to access, but it has been so long that I don't know how I did it or how to remove it. How can I remove restrictions file from an external hard drive so I can view or access these files on any computer instead of just one file has first been created? The computer that I created the folder of running Windows Vista. I am not able to access files in this folder from any other computer. It gives me the following error: "E:\School is not accessible. Access is denied. »

    Hi mango127,

    I suggest that you give all permissions for everyone on this folder and check if it works.

    "Access denied" error message when you try to open a folder

    http://support.Microsoft.com/kb/810881

    How to capture a file or a folder in Windows XP

    http://support.Microsoft.com/kb/308421

    If the previous step fails then I would suggest that you take the backup of this folder on the computer you were accessing and later to format the hard drive.

    How to use disk management to configure basic disks in Windows XP

    http://support.Microsoft.com/kb/309000

  • I have added an external hard drive to my XP but cannot access

    I have added an external hard drive to my XP but can't access it because I have no letter in my computer. not very conscious of their hope if someone can give a sense computer question and help thanks

    You have posted in a forum dedicated to provide feedback on the web site of Microsoft Answers.  It is unlikely that you will get the help you need here.  Instead, please ask to Windows XP 'Hardware and drivers' forum here: http://answers.microsoft.com/en-us/windows/forum/windows_xp-hardware.

  • When I plug my portable hard drive to the usb port it does not read and display the contents...

    When I plug my portable hard drive to the usb port it does not read and display the contents...

    Hi deaza,.

    Ø Have you connected the USB hard drive to the computer directly or you have used an external USB hub to connect?

    O trying to connect to another USB port to check if it works?

    O the hardrive shows in windows of the computer when you connect it?

    Method 1:
    If you have installed security software, I suggest you to temporarily disable the security software and connect the USB and check to see if the same problem happens. Make sure that you enable the security software after checking.

    Alternatively, you can try to plug the USB key into a different USB port and check if it helps.

    Method 2:
    I suggest trying to launch hardware and troubleshooting of devices and check to see if it helps, here is the link:http://windows.microsoft.com/en-US/windows7/What-to-do-when-a-device-isn ' t-installed-correctly

    Method 3:
    If this does not help, then follow these steps:

    (a) remove all your USB devices. Use the safely remove the feature to turn them off.

    (b) open Device Manager and navigate to the section for USB. Uninstall all USB drives. There should be one for each USB port, and then restart.

    To open Device Manager, go to the link below and follow the steps:

    http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

    (c) Windows should re - find all of the devices. If it is not the case, note the error message and let us know.

    You can also navigate to the link below and follow the steps to install the USB device.

    http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

    I hope this helps. Let us know the results.

    Thank you and best regards,

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system?

    Resettlement without disks

    Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

    Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

    You have a hard drive partition to do - but you would need to contact/see the FAQ from the hardware manufacturer (HP, Dell, Gateway, Lenovo, etc) to see if and how.

    Otherwise - you might have to order (pay for possibly) the factory restore/recovery of the value of the manufacturer.

    http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320?tag=nl.E539

    If it was built * friend *, you will communicate with them.  Ask your media.

  • My USB hard disk drive does not appear in my computer, but is seen in the BIOS and not in disk management or anywhere else! What should I do now?

    I use windows 7 Professional 64-bit. The hard drive I had does not appear in my computer, but it does in the bios. What should I do to make the data available to me in the hard drive?

    Sunday, January 20, 2013 11:46:37 + 0000, Nikesh1123 wrote:

    I use windows 7 Professional 64-bit. The hard drive I had does not appear in my computer, but it does in the bios. What should I do to make the data available to me in the hard drive?

    On which computer data has been put on this drive? What is the file
    the drive system?

  • I started the OS from a backup hard drive. Now My Adobe products does not work. "licensing does not work for this product" error code 150:30. Help me please!

    I started the OS from a backup hard drive. Now My Adobe products does not work. "licensing does not work for this product" error code 150:30. Help me please!

    Reinstall the software correctly. Migration / backups do not work due to the specific requirements of the activation system.

    Mylenium

  • I created a my page book epub file, and it works perfectly in ibooks. But it does not appear on my other devices, and the .epub file cannot be successfully sent by e-mail. 5.6.2, iBook 1.5 pages

    I created a my page book epub file, and it works perfectly in iBooks. But it does not appear on my other devices, and the .epub file cannot be successfully sent by e-mail. 5.6.2, iBook 1.5 pages

    What's not?

    You must check the iBooks category in your OS X system preferences: Panel iCloud: iCloud Drive: Options: Documents Panel. On iOS, you must have enabled to iCloud and in the iCloud Drive location setting iBooks. Also, in iOS parameters: iTunes and App Store, ensure that iBooks is running.

    The iBook.epub file is a compressed/compressed and renamed folder that represents a single file to any email client. What do you mean, it cannot be sent correctly - and it's your experience, send, or the failure of the recipient to view the ePub document? What email client?

  • I want to connect my Macbook Air (IOS 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear I

    I want to connect my Macbook Air (IOS X 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear as an option in the preferences/system sounds.

    Version 1.1.2.2 El Capitan driver support, then why don't upgrade you your MacBook Air to El Capitan?

  • My external HP Personal Media Drive device - does not appear on my computer

    My external HP Personal Meda drive does not appear on my rhubarb, I tried all USP ports on my computer and it will not be displayed. When I connect my HP Personal drive to my Labtop there is no problem, it presents itself. Any suggestions? p

    Hello

    1 - is the external hard drive not detected in the Device Manager?

    2.

    3. did you work before?

    I suggest you to try the steps below and check if it helps.

    Method 1: Try to download and run the Fixit tool from the link below.

    Hardware devices do not work or are not detected in Windows:
    http://support.Microsoft.com/GP/hardware_device_problems

    Method 2: Also check if it is detected in disk management.

    a. Click Start.
    b. Ttype diskmgmt.msc in the search box of start, then press ENTER.

    c. check if the external drive is detected.

    Method 3: Try the steps from the link below, which will help you change the drive letter.

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

    Method 4:  Also I suggest you to try the steps from the following link:

    Tips for solving problems of USB devices

    Hope this information is useful.

Maybe you are looking for

  • "Add a family member" option grayed out

    I want my husband to have its own apple - ID we always shared one, but it becomes very problematic. Initially, I had all 5 of our children on the sharing of the family.  When I discovered that I couldn't add my husband because of the limit of six peo

  • Cannot permanently delete files in the trash

    I have a file in the Recycle Bin that contains 2 other empty folders. When I try to empty the trash he says that the top folder is in use.  When I try to permanently delete the folders below it says that I don't have permission even if I read / write

  • How can I change the height police size and line (so the police fits) in my Inbox?

    In order to make the information containing the source and the object of my incoming emails (from Netzero) more easy to read, I want to make the font bigger. However, in doing so, the heights of line remain the same and the information on each line a

  • Black screen after a substantive change of screen.

    I tried basically change my wallpaper and the screen went black. Then I tried restarting. everything was fine until the log in page. But it became black again after I logged on my account. The guest account works fine. I tried the PRAM and reset SMC,

  • Clean install of El Capitan takes forever

    My SSD on my Mac Book Pro got some corrupted files, and I had to replace it. I am trying to do a clean install of El Capitan and it takes forever. It was 10 hours so far, and the status bar is about 75%. I have a new SSD, the i5 CPU, the 8 GB of RAM