Similar Questions

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• How to unlock your Mac with your Apple Watch

  Hello

  How to unlock your Mac with your Apple Watch?

  my mac: MacBook Pro (13 inch, late 2011) MacOS Sierra 10.12

  I can not found "Allow your Apple Watch unlock your Mac" in security and privacy

  
  

  Thank you
  

  
  

  
  

  .

• Audio clips do not play back on the new devices from Apple and Android

  Hola,

  Successfully exported and load a video on youtube.  Unfortunately discovered audio excerpts do not play back on latest Android and Apple devices, but being of other clips.

  It doesn't seem to be any rhyme or reason.  a lot of audio tracks, but I only have a problem with the two voices.  and select clips on the two tracks do not play back - it's not all one and nothing on the other hand, some play, some don't.

  video and audio play fine on most devices and computers, but on a privileged few, these audio clips are missing.

  PP CS6, exported in h.264 mpeg file.  audio is uncompressed 16-bit.

  Help.

  Florian

  I don't know if it's kosher to answer your own questions.  Understood that after about 4 hours of troubleshooting...

  reduced to all THE AUDIO CAPTURED on a PARTICULAR DAY.

  in figures, this bad paired audio audio the other day who played back fine: wav 48 kHz, 16 bit,.

  found a thread (http://www.videomaker.com/forum/topic/audio-channelscancelling-each-other-out) that mentioned stereo audio where one side is out of step with each other, when read by a mono speaker (some apple and android devices, but not all) it will cancel out (can still be heard, soundtrack and effects).  When reading through the headphones or stereo speakers, you can tell that she is out of step.  Something trying to convert the stereo signal to mono cancelled the progressive audio funny.

  My dose was hard pan the audio tracks, solo, export only one mono aac audio, re - import the sound signal of a new track, and I settled for the mono voices above.

  hope this helps-

  -Yes, thank you-

  -your welcome

• Can I use Windows based DW program based on the DW cs4 files on a Mac with an Apple?

  Have been using DW cs4 with Windows Vista.  Buying a Mac soon was wondering if I can use these files on a Mac with a version of Apple on DW?  Thank you

  The files that DW creates are simply old text (.html, .css, .js, etc.) and will work on any computer.

  What you want to do is to copy the real site folders and their contents to the new machine, then the old machine...

  1. go to Site > Manage Sites > click a site > export to create an .ste file

  2. copy this file to the new machine

  3. on the new computer, go to Site > Manage Sites > Import to import the .ste

  4. make sure the local root folder points to the newly copied site folder

  5. Rinse and repeat for each site

• Fresh install on Bootcamp does not properly look book on Mac with windows 8

  the Apple Store in shanghai recently reinstalled Bootcamp and Microsoft office.  I didn't check it before you leave the store and won't come back for two weeks but discovered a few problems I hope to be able to stare at me.

  The speakers do not work, and it seems that the drivers are not up to this day somehow.  also, I can see ms is listed in the programs being installed, but there are no apps for it on the desktop computer or another screen that windows 8 comes with.  Not sure what other screen is called but looks like an iPad.

  Can someone give me a link to update the audio drivers and tell me how to find ms office? Am in ningbo China and no one in the Apple Store it includes English Windows and I really don't want to wait two weeks before returning to shanghai.

  Satisfaction on the work in advance.  :-)

  the Apple Store in shanghai recently reinstalled Bootcamp and Microsoft office.  I didn't check it before you leave the store and won't come back for two weeks but discovered a few problems I hope to be able to stare at me.

  The speakers do not work, and it seems that the drivers are not up to this day somehow.

  You can try to download the latest version of the Boot Camp software which includes the latest available drivers:

  https://support.Apple.com/kb/DL1720?locale=en_US

  also, I can see ms is listed in the programs being installed, but there are no apps for it on the desktop computer or another screen that windows 8 comes with.

  See: How find all your Microsoft Office apps and more... 

  Not sure what other screen is called but looks like an iPad.

  Can someone give me a link to update the audio drivers and tell me how to find ms office?

  See https://support.Apple.com/kb/DL1720?locale=en_US

  Am in ningbo China and no one in the Apple Store it includes English Windows and I really don't want to wait two weeks before returning to shanghai.

  Satisfaction on the work in advance.  :-)

• HP Scan does not work after last update Mac with the Mavericks and HP software was last updated

  Hi, I have a printer D110a and I recently installed Mac OS X Mavericks. After you have installed the Mavericks, I gave my Mac a printer HP Software Update. Now, when I go to the HP scanning application, I get a message that reads: is missing or damaged software one or more components required by HP Scan is missing or damaged. Please reinstall the software for your HP device. What should I do?

  Hi groberts619,

  Unfortunately the software, you get the update of the printer software does not include the application of scanning HP - only print and scan drivers.  I just checked out your product and it does not appear that he has plans to release a scanning HP Installer updated for this model.

  On the Mavericks seems, your best option will be to use the Apple's Image Capture scanning application.  You will find this application in the folder/Applications.  You also have the ability to scan using the preview.  Look in the file menu to make the command import from a scanner.

• Back up a Mac with more users

  Hello

  I have an iMac and two different users on it (because my girlfriend insisted that she wanted to separate * yawn *). In any case, now, when I save the iMac by Time Machine on MY account, is there also to back up his account, or would I need to log into his and do it from there?

  If everything goes well, it backs up both my GF will force me regularly save hers as well (it is unclear how). She is sweet, really, but he makes me do a lot of things for her.

  Thank you very much!

  Yes, it saves both.

• How can I get the sim unlock card or carrier unlock t mobile USA, I use my phone in India and my sim card does not work and when I checked with the apple support, they said, it can be locked my previous carrier T-mobile USA, which is a solution

  How to unlock carrier T - Mobile USA, that I'm unable to use my phone in India as it says sim does not, I checked with Apple support they said previous carrier may have locked

  You will need to contact the carrier, it is locked to and follow their unlocking procedure. Only the carrier to ensure that it is locked can allow and process a request for unlocking.

• Removal of security icon to remove a mounted cd/dvd drive that can not be delete. also the problem with the apple driver.

  Vista Home premium

  64 bit

  HP pavilion dv4-1220us

  It happens when I went to open I tunes and he indicated a problem with the cd/dvd and then I noticed security remove the icon at the bottom of the screen, attended safe remove and it delete my CD-ROM drive mounted cd/dvd look no further and I notice this driver is part of apple who was a pilot of speed indicating this driver will remove your drive of cd/dvd rom IS NOT WORKING WITH some programs installed.  I contacted apple, we have deleted the driver and complete the process with the driver of the machine. Now, this does not take care of the security delete icon then tech apple tried to help and communicate with Microsoft or hp.

  RESTORE MY COMPUTER SEVERAL TIMES, THIS ICON IS STILL THERE.

  DOWN MY BIOS AND THE ICON IS STILL THERE.

  THIS SCANNER DRIVER AND THE ICON IS STILL THERE.

  Security delete icon States: remove TSST CORP CD/DVD TS-L633L ATA DEVICE READERS of CD-ROM/DVD-ROM if I hit remove it will remove my CD/DVD-ROM DRIVE.

  I went on my computer and click on my cd/dvd rom drive and went to properties and that's what I found below.

  1. FUJITSU MHZ2250BH G2 ATA HARD DRIVE: WENT INTO PROPERTIES TO DISPLAY DRIVERS, IT HAS A HPDSKLFT. SYS DID NOT SIGN THE OTHER TWO DRIVERS ARE THE SIGN. ENTERED DRIVERS FILE AND INSTALLED THE SIGN AND IT IS SHOWING NO SIGN, ALSO WITH HP ASSIST THIS HARD DRIVE IS DISPLAYED AS 0 FAILURE AND DISK.

  2 TSST CORP CD/DVD TS - L633L ATA DEVICE DVD/CD-ROM: ENTERED VIEW PROPERTIES PILOTS AND THIS ONE HAS THE DRIVER OF THE VEHICLE AND A DRIVER.

  At the moment I'd hide so I does not uninstall my cd/dvd drive.

  Do I need another hard drive?

  Is this something with the Bios?

  Apple has tried to help with this driver of train that I'm not sure that this problem is still with this gear or what?  This is the site about the problem to apple and the site of heavy plant driver.

  http://www.GearSoftware.com/support/drivers.php

  http://www.GearSoftware.com/wiki/index.php?title=CD/DVD_drives_disappear_after_installing_iTunes

  http://support.Apple.com/kb/TS2308

  http://www.GearSoftware.com/wiki/index.php?title=drivers:_Windows_ - _Updating, _etc, _64_bit_versions, _removing

  Hi Mamalasting,

  I'd say Hewlett-Packard to visit support website and check if they have the latest drivers for the DVD player.

  Reference:

  http://www.HP.com/#support

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• ICloud how we share files between 2 users different mac with various apple ID?

  We would like to be able to use iCloud as a shared backup between two designers, another giving equal access to all other files.

  iCloud is an Apple product, CC is an Adobe product.

  It is currently not possible to what you want to do. Collaboration and file-sharing is coming.

• Back to my Mac works for you after the update to 10.11.4?

  After the update to 10.11.4 on my Mac Book Air I can't see my other computers at the office. I turned it works on desktop computers (yesterday that he would not allow it to work, but today it is) and the computers can't see each other in the Finder, even with restart Finder. Did someone else with problems of connection/browser with Back to My Mac?

  Hey brycesteiner,

  I understand that you have a problem with Back to My Mac. Let's see if we can get this sorted out.

  I would first start by taking a look at the article below to address the problem with the configuration of the router and the parameters of sharing on the Mac that you connect to.

  Get help using Back to My Mac
  https://support.Apple.com/en-us/HT203907

  Take it easy

• Unlock the Mac with Apple Watch

  I followed all the correct steps to unlock my mac with my Apple Watch, but it does not always work for me. I just get a wheel that rotates on the login screen and no point red notification on the watch

  Make sure that your Mac OS X is up to date. Open the App Store, and then select the updates menu.

  Ditto for your Apple Watch. Open the Watch on your iPhone app and then type general > software update

  Automatically unlock your Mac with your Apple Watch - Apple Support

• Impossible to activate the unlock Mac with Apple Watch

  I am running Sierra on a MacBook Pro 15 "retina early 2013

  I have the first edition of Apple Watch, running Watch OS3 and iPhone iOS running 6-10.

  Everything is OK, except that I don't have the option to activate Mac unlock with watch in security settings

  I disconnected (e) turned iCloud on all devices, turned to two factors, turn it on again, reconnected, rebooted devices. Plus a lot of combinations of these, but still no joy.

  Could someone help me before I call support?

  It's the requirement: mid-2013, or more recent Mac using macOS Sierra. See automatically unlocks your Mac with your Apple Watch - Apple Support.

• Your Mac has been unable to communicate with your Apple Watch

  Hello

  I don't know if someone else found this situation but I am not able to activate the function "allow your Apple Watch unlock your Mac" is enabled.

  All devices are on the same Wi - Fi, all connected with the same Apple ID, password enabled on the watch, but still nothing.

  I have the FileVault enabled on my Macbook Air. Does this influence

  Hello

  Verify that you followed all the steps here:

  Automatically unlock your Mac with your Apple Watch - Apple Support