Do not start satellite M60-167.

Similar Questions

• Market with power supply is not possible on the Satellite M60-167

  Hello

  I'm sorry for my English saw. I have a problem with my Satellite M60-167. When I have connected the laptop with power supply and press the 'Power', then does'nt start Notepad.
  When I use only the battery and push a lot of times the "Power Button", that the laptop will be started.
  Question: It is a problem of material or not. This laptop that I bought it in January 2006.

  Can you help me?
  Thank you very much for your theory.

  AX.

  Hi Axel

  My theory is that there may be some problem with button / stop himself (white metal under the button), or perhaps with several Planar cable wire.

  Also, for me it is definitely hardware problem. If you want, you can contact the partner of service allowed in your country and see what they have to say about it.

• Satellite M60-167 cannot start the operating system

  The name of the model Satellite M60-167.

  Laptop turns off after a few minutes of work.
  Then I format C with Windows XP Pro, but it turns off as before.

  I did not finished the instalation and now I can't enter to finish.
  I had only blue screen same not the Toshiba screen on start.

  Can not enter the bios as well.

  Please help if you can and thanks for all!

  Post edited by: cota26

  Hello

  > Laptop computer just turn off after a few minutes of work.
  > Then I format C with Windows XP Pro, but it turns off as before.

  I think this sentence is the key description resembles your laptop could overheat and automatically stops.
  Why is this happening? Well, the laptop could overheat temperature high inside the laptop. It will stop automatically to prevent the equipment from damage.

  My long experience, a clogged cooling fans could be responsible for the bad cooling and the temperature high.

  So what to do?  :|
  In my opinion, he must clean the fans to get rid of dust and debris.

  The jet of compressed air is very useful tool and could help you to clean the fans.

  Hope this helps to get the laptop running.

• Satellite M60-167: display problem

  Hello

  3 days ago, I bought a new Satellite M60-167. Now I have some problems with my screen, maybe it's broken. Whenever the screen resolution changes, I have a few white artifacts (looks like white stripes) in the upper right corner. If I have the black wallpaper there is a grey area that is dark at this angle. Now, I want to know if this is normal or my screen is broken and need to be changed.
  Please respond quickly!

  Post edited by: fabse

  Hello

  Although it is very difficult to say what may be the problem but I don t think that it s a normal question. It s a new laptop computer, and if you're not sure if it s a default display, or everything you need to bring this unit to your dealer. Check it out! It is perhaps necessary to replace the failover of the s display can get a new

  Good bye

• Driver memory PCI Flash for Satellite M60 - 167

  I just reinstalled Win XP Professional (a new, because the version of recovery has been only XP Home), and after that, I have a problem with the PCI FLASH memory driver, the hardware Manager to show me that I need this driver? Drivers for SD memory cards have already installed, but the problem is still there. I need memory PCI Flash driver for Satellite M60 - 167 model No.: PSM60E-0C801GGR

  Hello

  Generally, tools and Utilities CD should be delivered with your laptop.
  On this CD you will find all the required drivers for Windows XP. You can use the same drivers WinXP Pro.
  If you install the drivers if you do it in the right order.
  Installing the chipset utility is very important. This must be done first.
  In addition, you must pilot your controller CardBus PCMCIA cardbus.
  Check it out.

• Sims2 does not start on my satellite m60-167

  anyone has an idea why the sims2 does not work on my laptop? This shows only the logo and claims "sims2 noticed a problem and has to be finished."
  Why? There is no clonecd installed etc....
  everything seems to be on the new standard on my laptop. What is going on?
  Thank you very much for the help.

  Hello Petra

  It is very strange because the Satellite M60 has a very powerful graphics card. As you know on this path, it is not easy to give a precise answer. Sims2 is known to me, but I've never tried.

  Usually some games detect a problem with the performance of the graphics card, but the error message which mentioned is unfortunately not accurate. Thank you for visiting the SIMS2 support page. Toshiba doesn't support game problems and you have more chance to get some tips on the SIMS2 support page.

  Good luck!

• Does not start satellite C50-A-1E2

  Hello
  When press the power button / the notebook does not start. The screen is black, the fan is running and waving up and down. After 10 to 30 minute wait to start the laptop is well until next time. The laptop is not old, bought about 15 months ago. Nothing has changed, no BIOS changed also. The only change is Windows 10. Any ideas?

  Remove the battery and try to start with the power supply only.

• Created recovery disc is ok, but does not start Satellite A300

  Hello
  as the title suggests, the disks fail to start, details below formatted for reading easier (I hope :))

  -All-new series Toshiba A300
  -J' have created a disk of restoration with the toshiba utility, there was no error, the files are there but the drive seems to be unbootable.
  -This happens with both attempts, I made, using Verbatim r and Sony + R media.
  -The recovery disks will NOT start on my desktop system either.
  -L' laptop starts fine with a couple of distributions Linux on CD - R.
  -J' use F12 to tell the laptop to boot from the DVD.
  -J' have much experience dealing with the LiveCD, bootable disc burning, etc., so I'm inclined to think there is a problem with the toshiba utility.

  Any help will be much appreciated. Thanks in advance.

  Hello

  There is certainly nothing wrong with the Toshiba Recovery Disk Creator.
  I burned the recovery disc too. Once it failed because I did not use fully compatible DVD. Then I tested it with TDK - R and everything went well.
  No errors, nothing. Finally, I booted from the DVD and could reinstall the OS too.

  I presume that you should check the other DVD.

  Good bye

• Do not start satellite A300-1AK after Win Vista update

  Hello all, hope someone can help me

  I have a toshiba laptop with a view, I got the brilliant idea to make a update for a long time that no was not updated at the end I restarted the update as necessary nb. and then nothing!

  The practice turn on the toshiba nb outside screen and then the screen remains black, the hard drive does not read, I tried to put the recovery disk and start the disk but nothing to put the dvd, but no operating system, does not read anything...

  That's happened? Possible that an update is this damage? The problem and as I have already said that I can't act somehow...!

  -I can't access the computer Safe Mode
  -always black screen and does not load the hard disk
  -J' updated because I just reset the laptop with the recovery DVD, so the drive worked, once the update is complete, restart Windows that I came out of this black screen, I noticed that does not read the hard drive. ..

  Thanks for all the support and suggestions.
  Please send me more ' procedure to run

  Francesco

  Hmm, do you mean you don't see anything? Neither the Red Toshiba start screen?
  What to say it doesn't sound good.

  But try this short workaround:
  Disconnect the power adapter, remove the battery. Leave the laptop for a while disconnected from both parties I would wait a few hours
  Then bring the two parties together and try power upward

  Good luck

• Does not start Satellite A200 - checksum of the header file is possibly corrupted

  Does my Toshiba Satellite A200 on Vista.

  The following message appears on the screen: "the file is maybe damaged. The checksum of the file header does not match the checksum calculated.

  I tried reinstall drive, but it does not solve the problem.
  The following message is displayed: status: = xc0000428 (as well as instructions that do not seem to help at all).

  What can I do?

  Hello

  You mean that the new installation of operating system using Toshiba Recovery disk didn't?
  Hmmm, in this case, it seems like a RAM problem

  I searched a bit on the net about this error and found some info that might be linked to the faulty RAM memory.

  You should try to verify if a single one single module of RAM is affected.
  Otherwise you need to replace the two modules and then should try reinstalling the operating system.

  Welcome them

• Windows does not start Satellite S50

  I can't seem to fix my Windows 10 or reinstall it. I tried to do an image ISO Windows 10 in a USB flash key or enter the toshiba HDD erase mode.

  Can someone help me?

  Here are the details: satellite s50

  I press 0 + power button to enter the recovery mode and the black screen with the TOSHIBA logo appears and down: Please wait. Then a black screen and it freezes (nothing happens more than 20 minutes). What else can I try?

  Thank you

  If the recovery of HARD drive and install USB Win10 both fail, it could be a hardware failure.
  You may need to send the laptop to a Toshiba repair for repair center.

• Satellite A205-S5804 does not start.

  My computer does not start Satellite A205-S5804.
  It does not work in safe mode, and it will not work with the system restore.

  It stays black with a cursor, if anything.

  How to on my computer?

  Hello

  You have a cursor blinking in the upper left corner?
  In this case, you should check the disk HARD has been recognized by the BIOS.

  If the HARD drive is listed in the BIOS then I would recommend checking the HARD drive using s drive fitness test:
  http://www.HitachiGST.com/HDD/support/download.htm

  To run the test of fitness of s by car, you must download the appropriate creator or image and create a support of auto-start.

  Check it!

• Satellite L755-167 does not start

  Hi all

  I have the following problem:

  Laptopt does not start, with the block power plugged the Power Supply led is lighting but the battery charge indicator is out.

  I can't tun the laptop on, I tried it with the battery, and then without battery. I also tried power removed and the battery, press the power on button for 30 seconds and then plugged the external power supply and treid to turn on laptop - it does not work - the fan is spinning or the other!

  I also tried to change the CMOS battery, but it helps doensnt!

  What could be damaged? What should I try to fix the problem? -Maybe the RAM is broken or the Power-On/Off switch?

  need help

  If I understand you right there is no reaction at all. In this case, it is possible that there is a problem with the power supply e placed on the motherboard.

  Of course, I can't say for sure and just exact mainboard check can help you with this.

• Satellite M60-170: Express media player does not load

  Hello

  I guess I have a problem with the express media player on my satellite m60-170.
  I have inserted an audio disc or a dvd and the laptop does not work.
  When I press the cd/dvd button, instead of 'Act' as it should, it just support windows (such as pressing the power button), open the media player and start playing the disc...

  (The cd/dvd button is attributed to "cd/dvd")

  any suggestions?

  thanx.

  Hello

  Please, go to the control panel and choose the application of controls of Toshiba.
  On the first page, you have two options: CD/DVD and internet buttons.
  Click on the CD/DVD button and select the CD/DVD
  In the media applications tab, you can try to choose the express media player.

  Note: Make sure that the express Media Player has been correctly installed on your laptop.

• Satellite M60: start windows from USB HDD

  Hello

  I have the problem with the windows startup (I tried 2 k, XP, 2 k 3 and vista beta2) from USB HDD. After the normal system install on HDD USB seqence I can start using my new system, but after a few seconds, I see a blue screen with an error message. What should I do to USB HDD init system?
  I have the satellite M60, BIOS version 1.40

  Hello

  As far as I know that it is not possible to boot from USB HDD. On this forum I saw the small number of different subjects, but no one can confirm that something like that may be possible.