Do not start W30Dt-A-100 with Windows 8 satellite

I have a toshiba satellite W30Dt-A-100 with Windows 8.
But the laptop does not start the Windows 8.

I get only the screen + Toshiba Leading Innovation > +.

Can someone tell me how I can insert the BIOS or how do I turn on the computer.
I think that it does not check the disk.

Where and how can I open to find the hard drive.

Well cordially

At first I want to say is: don t open anything on your own. I presume that for laptop is pretty new with valid warranty so don t do anything that can void the warranty.

Since when did you notice this kind of behavior?
Have you noticed the problem even if you use it in laptop mode and tablet?

Tags: Toshiba

Similar Questions

  • I have a Dell Inspiron with windows XP and I can not start. I have the windows disc but do not know how to clean and reinstall. Please help me

    I have a Dell Inspiron with windows XP and I can not start.  I have the windows disc but do not know how to clean and reinstall.   Please help me

    You can repair XP or try the following:
    http://support.Microsoft.com/kb/917964
    http://support.Microsoft.com/kb/307545

    TO

    Re - install http://support.microsoft.com/kb/978788

  • ITunes does not start after the installation of Windows 10

    ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).

    Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

    Solution, according to this link, is:

    If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • Windows XP does not start. Can I boot Windows from a disk so that I can recover the data?

    Windows XP does not start. Can I boot Windows from a disk so that I can recover the data? This should be a CD because it doesn't have a floppy disk on my laptop drive. It is maybe that my hard drive has begun to fail and therefore cannot locate XP startup files. I can not start using one of the other methods of starting for example. Safe mode. If I can recover the data, I can then reload Windows and check the surface of the disc etc etc. Thank you all for your comments. Steve

    Lately, I'm leaning toward the Hiren's BootCD you can download here:

    http://www.hirensbootcd.NET/

    On the left, click on download, scroll down, choose the most recent version

    The download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

    Direct HTTP mirror + Torrent, Torrent Magnet

    Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

    The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract theHirens.BootCD.ISO file that will be used to create your new bootable CD.

    Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

    File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

    If you need a simple and CD burning, this is a free software popular software:

    http://www.ImgBurn.com/

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your new bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.
    These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.

    It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.  You will feel at home.

    Using the Mini XP, you can access the Internet, maneuver around your system, copy files, replace the files, run the scans for malware, etc.  There are dozens of free and useful tools included in the CD that can be used to repair your system, or copy files to another device such as a USB device or an external drive if drop in trying to repair your system.

    If you want to see if you can fix your system, describe what is happening when you try to start and to answer these questions:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

    You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  • Volume shadow copy Service information: could not start the Server COM with CLSID {790f2886-9889-4c99-8ef5-531add05d044} and name SW_PROV. [0 x 80110802]

    Problems with VSS and DTC... dunno how or serious errors are

    One of the two messages I get the message this is the right place to post

    Volume shadow copy Service information: could not start the Server COM with CLSID {790f2886-9889-4c99-8ef5-531add05d044} and name SW_PROV. [0 x 80110802]

    Operation:
    Get an interface that can be called by for this provider
    List of interfaces for all providers support this context

    Context:
    Provider ID: {262b716e-bb23-41b5-aaef-e2c15e767167}
    Class ID: {790f2886-9889-4c99-8ef5-531add05d044}
    Snapshot context: 0
    Snapshot context: 0

    Hey artinusa,.

    Welcome to the Microsoft Answers site.

    This error message is seen only in a Windows Server environment.

    The community more suited for this problem would be the Microsoft TechNet community. Please post your query it better support.

    http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

    Have a great day.

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Greetings Workshop does not work on my laptop with Windows Vista

    Greetings Workshop does not work on my computer acer laptop with windows vista. says that it cannot read a part of the program. How can I make it work?

    * original title - wishes workshop does not work on my laptop with windows vistaIdeas: insert an error code or give a brief description of what you are trying to accomplish or fix.__*

    Greetings Workshop does not work on my computer acer laptop with windows vista. says that it cannot read a part of the program. How can I make it work?

    Hey monkeymanknitting

    1st thing is to see if it is compatible with vista

    http://www.Microsoft.com/Windows/compatibility/Windows-Vista/

    If it's trying to do a right-click on the setup.exe then run as administrator

    If this is not vista compatible read below

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

    Walter, the time zone traveller

  • Drivers for a Deskjet 3050 J610a will be dependent not on a HP PC with Windows 7 (64 MB).

    Drivers for a Deskjet 3050 J610a will be dependent not on a HP PC with Windows 7 (64 MB).  Went through all the steps of self-help without result; any suggestions?  Thank you.

    OK, I wanted to just make sure the correct standard troubleshooting had been done. Because it does not sound like a system problem (this is why a system restore has been previously recommended), I recommend that you try a tool launched by Microsoft called Fixit. See the link below for more details:

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  • Microsoft windows fax and scanning will not start on my computer laptop windows 7

    Microsoft windows fax and scanning will not start on my computer laptop windows 7

    Original title: fax and scanning

    Press Windows key + R

    Type: optionalfeatures.exe

    Press enter

    Expand Print and Document Services

    Uncheck the fax and scan Windows

    Click OK

    Reboot if prompted

    Press Windows key + R

    Type: optionalfeatures.exe

    Press enter

    Expand Print and Document Services

    Check fax and scan Windows

    Click OK

    Reboot if prompted

  • I still have the problem to start appeal video Messenger with window 8... ? do you have an answer for me?

    Separated from this thread.

    I still have the problem to start appeal video Messenger with window 8... ? do you have an answer for me?

    Hello

    Thanks for posting your query on the same issue. I will certainly help you in this matter.

    However, I would like to know;

    1. What is the brand and model of your computer?
    2. As you mention "you still have the problem" can I know when this problem occurred in the first place?
    3. Which messenger you are talking about?
    4. What happens when you try so that video calling?

    If you re referring Skype Messenger, please follow the steps.

    Check the permission, follow the steps:

    1. Press Windows + C on the keyboard.
    2. Click settings.
    3. Go to permissions.
    4. Webcam and microphone and turn it on.

    See also:

    Chat, call and video call with Skype

    Let us know if you need more assistance. We will be happy to help you.

    ____________________

    Thank you best regards &,.

    Isha Soni

  • Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to fix this ti net pr

    Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to solve this problem, the next time he throws."  Except that it isn't, I get the same message and the program closes.  Anyone know what I can do to fix it?  Can not backup, can't do anything.

    There are dozens of discussions in this forum that describe the fix

  • Using the drive to 100% with Windows 8

    I just bought a new sony vaio with windows 8 and my task manager accused of being a 100% for the disk drive.

    The sum of all processes are less than 10%, but the use of the disc tha remains high 100%.

    My sony vaio is really slow because of this problem.

    I would like to know the process to solve this problem.

    Thank you

    Hello Kevin,

    Welcome to the community of Sony.

    I suggest you to check if there are any BIOS Update Utility is available on the support page on the problem of your computer's performance.

    You can check the update by putting exactly the model of your computer, here: http://esupport.sony.com/US/p/select-system.pl?DIRECTOR=DRIVER

    You can come back with exactly the model of your computer with the issue in detail. Look for the model # here: http://esupport.sony.com/US/p/support-info.pl?info_id=264

    Kind regards

    Miguel

    Note: If my post answered your question, please mark it as an "accepted Solution".

  • Novo Button does not start in OKR but in Windows

    Hi all

    I wonder if anyone can help me do my work with Novo Button.

    I have a Z50-70 who came without OS - if I want to install the OKR feature manually.

    I use Win7 Professional with OKR Engineering ed. 7.0.

    Here are the steps that I realized so far:

    1 installed Windows in UEFI (questionnaires properly as TPG) mode

    2. run OKR ed. Engineering and chose Option 2 to create the partition LENOVO_PART

    3 realized that the score was not hidden and concealed the partition using diskpart

    4. run OKR ed. Engineering and choose Option 3 (difficulty ASD)

    5 tried to start using Novo Button, choose "Recovery" - but the machine still boots into Windows after that

    See attached screenshots of my windows diskmanager and properties of the partition LENOVO_PART of diskpart.

    You have an idea why my machine still does not start in environment OKR?

    ***

    There is a strange thing that can be causing it - I'm not sure tho:

    Despite having installed Windows in UEFI mode, I need to enable Legacy Boot in the BIOS. When you enable "UEFI" only, the machine is not able to boot and returns errors

    • "Boot of Windwos Manager has been blocked by the current security policy."
    • "Default Boot Device missing or startup failed. Insert the recovery media and press a key. Then select "Boot Manager" to choose a new device Boot or Boot Recovery Media"

    Any help would be greatly appreciated!

    Thanks in advance!

    Note for someone else running on this problem:

    I finally got to work changing to MBR EFI - thank you for all your help!

  • Webcam is not detected on Presario CQ62 with Windows 7

    Hi, I'm new to the Forum so apologies in advanced if I made this topic in the wrong place.

    I have a Compaq Presario CQ62-423NR laptop PC, and I can't detect the webcam. I looked everywhere on the web and from what I have gathered, some Presario CQ62 models have no webcams and some do. Now, I'm about to think that my model does not have a webcam, but it seems as if there is a webcam at the top of the laptop unless someone can confirm that this isn't a webcam?

    in any case, I understood also that Windows 7 are compatible with the following programs for HP Laptops: YouCam and CV SmartMedia.
    Sources are here.
    http://support.HP.com/us-en/document/c01970581

    Which leaves me with the options to install one of the programs above, that I did and the two programs do not detect my webcam despite this webcam has been registered there.

    I tried to test on other programs of messaging like msn, Skype and so forth and the webcam is still not detected.

    I also made sure the programs I have installed are compatible with Windows 7 64 bit.

    I also trouble trying to find a driver for the webcam to this model as well, that makes me then back to the start, I have even a webcam? -___-

    So anyone who would throw some lights as to whether or not I have a webcam for this particular model or there is something I am doing wrong?

    Thanks for all the help!

    Hello

    Sorry, but your model have only the built-in microphone. There is no webcam.

    Check the specs here.

  • A SCREEN BLUE, COULD NOT START WITHOUT HDD FOUND, AFTER WINDOWS XP UPDATE IN FEBRUARY

    Like many of you, after the updates of February I was not able to start my laptop.  Safe mode does not work and when I tried the solution accepted since the recovery/Repair Console, I got a message saying "Setup cannot find hard disk units installed."  After hours of searching for a solution, I finally thought to it and now everything starts very well.  For those of you are having similar problems, here's what I did...

    (1) visit this site: http://techrena.blogspot.com/2008/10/how-to-install-your-own-wndows-xp-in-hp.html and follow the instructions for the BIOS.

    If this link does not work for your computer, try this one: http://techrena.blogspot.com/2009/01/integrate-your-own-drivers-or.html

    Then, insert your Windows installation CD and when it loads, press R to repair.  Then follow these instructions:

    (2) select the option for C:/Windows

    (3) type this command: CHDIR $NtUninstallKB977165$\spuninst

    Press ENTER

    (4) type this command: BATCH spuninst.txt

    Press ENTER

    (5) type this command: systemroot

    Press ENTER

    When 6) complete, type this command: exit

    (Most of the instructions above have been found on this thread: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1/)

    If your computer did not come with a Windows CD, you can make a CD for recovery of your choice or borrow one from a friend.  For the purposes of recovery, I don't think it's important if you have XP Home, Pro, etc., any CD will work.  There are websites online that will show you how make a recovery CD... and even provide the files... it takes just a little research.  Unfortunately I did not save the link for the site that I used: o.

    If for any reason, you are still unable to get your computer running and want to get your important files on your hard drive, I found this amazing, easy and free method.  Just download the OS and burn the ISO to a CD and then start on the CD and load the operating system (direct loading from CD - do not install) below.  You will be able to browse all your files and transfer them to a USB drive or burn them on a CD: https://help.ubuntu.com/community/LiveCD  certainly a good thing to keep on hand for future if nothing else!

    Apparently, it is a root virus (?) of some sort that causes the problem of update in the first place.  I scanned with every scanner I can think of and Nothing has been found on my system.  Does anyone know if there any instructions on how to find/get rid of the problem so that it does not happen?

    Apparently, it is a root virus (?) of some sort that causes the problem of update in the first place.  I scanned with every scanner I can think of and Nothing has been found on my system.  Does anyone know if there any instructions on how to find/get rid of the problem so that it does not happen?

    A rootkitTrojan horse, to be precise. References include:

    MSRC: Restart issues after installing MS10-015 and the Alureon Rootkit:
    http://blogs.technet.com/msrc/archive/2010/02/17/update-restart-issues-after-installing-MS10-015-and-the-Alureon-rootkit.aspx

    Backdoor.Tidserv [AKA Win32/Alureon] and MS10-015

    Backdoor.Tidserv does a very good job in this sense, particularly with the
    latest version (TDL3), which uses an advanced rootkit technology to hide its
    presence on a system by infecting one of the low-level kernel drivers, then

    cover his tracks. While that the rootkit is active, there is no easy way to
    detect the infection, and because he's so deeply in the core, most of the users
    don't see anything wrong in the system
    ... Even worse, because the infected
    driver is critical for the system boot, Windows will not start in Mode safe
    either [after installing MS10-015 on an infected machine].

    http://www.Symantec.com/Connect/Blogs/Tidserv-and-MS10-015 [emphasis]

    TDSS rootkit silently owns the net

    TDSS rootkit 3rd variant is the last member of the family of rootkit Tdss is
    spreading rapidly all over the world. While a number of rootkits is just
    developed as a proof of concept, this is not the case. TDSS rootkit is well
    known for corporate antivirus because of his goal to get full control of the
    PC infected and using them as zombies for its botnet.

    During these years, he always showed a team of people behind it, which
    always applied advanced techniques often able to bypass antirootkit software.
    In fact, this last variant could be easily identified as the stealthy rootkit
    in the wild.

    This infection is having all the best rootkit MBR, the best of
    Rustock.C and the experience of the old Tdss variants. Result is an infection that
    is quickly spreading on the net and it is without being detected by almost every security
    software and 3rd party anti rootkit software.

    .. [20 Nov-09] terms no antirootkit is able to ignore the disk filtering
    technique used by Tdss rootkit but, even if it were possible, this rootkit
    could not be detected by file size cross check because size of the
    the original and infected files are exactly the same.

    http://www.Prevx.com/blog/139/TDSS-Rootkit-Silently-Owns-the-Net.html [emphasis]

    W32/Alureon-variants are frequently 'lost' by W32/FakeAlert, etc., infections; CF. http://blogs.technet.com/mmpc/archive/2010/02/24/if-it-calls-itself-security-essentials-2010-then-it-s-possibly-fake-innit.aspx

    NOTE: KB977165 for WinXP was 'shot' on 11 February. Although he remains available for a manual installation to the Windows Update Web site, it is is more "pushed" via automatic updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Windows does not start. Stuck on the WIndows logo or a black screen United

    Original title: BOOT ERROR

    It's been 6 days since my computer is having this problem.i spin asrock pc.the problem is when I restart my computer it doesn't not load some time the screen appears black and sometimes windows logo appears faintly.and when I restart once more, he sows me windows error message it says windows does not start correctly and give me options to start , they start windows normally, sfafe mode, last known good... etc.when I chose an option and start same happens.but when I turned off my pc and wait a minute and start windows boot normally without a problem.is this because of my startup file or something else?

    No, you can't.

    If you have a true bootable XP with SP1 or SP2 installation CD, you can create a new installation CD with SP3 integrated using a process called "slipstreaming".

    It is a pleasure to the project for a day and there are several methods, you can read on the Internet, such as BleepingComputer:

    http://www.bleepingcomputer.com/tutorials/tutorial154.html

    If you want to use the Recovery Console and is not a real XP bootable installation CD or are not sure what you have, simply create a bootable XP Recovery CD of Console yourself (without XP media required)

    Here's how:

    If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

    This is not the same as recovery disks that might have come with the acquisition of the system store.

    You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

    The ISO bootable image file you need to download is called:

    xp_rec_con. ISO

    Download the ISO from here:

    http://www.mediafire.com/?ueyyzfymmig

    Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

    http://www.ImgBurn.com/

    When you install ImgBurn, DO NOT install the Ask toolbar.

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When you start on the CD, follow the instructions:

    Press any key to boot from CD...

    Installing Windows... going to pronounce.

    Press 'R' to enter the Recovery Console.

    Select the installation that you want to access (usually 1: C:\WINDOWS)

    You may be asked to enter the password (usually empty).

    You should be in the folder C:\WINDOWS.  It's the same as the

    C:\Windows folder that you see in Solution Explorer.

    The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

    For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

Maybe you are looking for

  • the upgrade of my maximum authorized computer graphics

    I want to update the graphics card on my pc to the maximum possible.  Here are the stats for my PC Model #: m9100zProduct #: KC835AV-ABASoftware Build #: 81NAv6PcA4Service ID #: 021-508PCBRAND: Pavilion Ultimate windows vista64 bit running.  6gig ram

  • How to read the values of the scale of a graph of intensity?

    My goal is to read the scale varies (SHOWN Max and min values) of a graph of intensity. I want to do a scan of a box, graphically display the result in the graph, zoom in on something interesting, and then use the zoom coordinates to define the area

  • How to restore the toolbar at the bottom of xp home

    just lost the background toolbar for xp family I have the nvidia video card that's all what I can offer an explanation of the problem

  • Card QD174AV Tuner TV HP

    I just bought a desktop system h8 - 1160t that included a TV Tuner card with remote control.  I can't find an online manual can several representatives of HP that I talked to answer my question to my satisfaction. It seems that the remote is useless

  • missing avcodec - 52.108.0.dll

    I get it, missing avcodec - 52.108.0.dll, message whenever I try to run a video file of a recorder of video downloaded on a USB. using a player called VLC media player, which is supposed to run all the video formats and recommended bye the cctv manuf