Do plan and background of the same color

Similar Questions

• PS do not show the same colors and LR

  LR and PS now showing the same colors

  I do most of my work in LR and then edit in PS. When the image is displayed in PS it appears same as LR - I can show both applications side by side and the images are the same... As it should be.

  If I then save the image in PS (under a new name) then refresh LR, I see different colors in the new image in LR. It is more obvious (for the moment) in the pictures with a lot of red wines. It seems that the saved image of the PS appears a bit lighter in LR than the original.

  I sRGB in use everywhere - in the camera, LR, PS-I tried with GPU acceleration on and outside.

  I'm now getting annoyed that I can't find the cause.

  I edited as PSD and TIFF and problems remain.

  I don't remember having this problem before, so I saw my recent updates.  LR and PS have been updated. My video drivers have been updated so I their income with no improvement.

  I even saved JPG from LR and PS: the outputs are different, even if I do any changes.

  Clues?

  I solved my problem (the following tips on another thread)...

  I had defined LR in order to apply the auto tone when new images are added.

  It is fine when I load the original of the camera... but also to apply the auto tone to the acquired images of Psalm

  So, I edit in PS, save it... then, when imported LR / synchronize the image, automatic tone applied Informatics and it changed. This explains how LR and PS display different images.

  It is a setting that I recently activated and not a problem with the LR or PS

• I have 6 buttons on the navigation bar that point to 6 different pages - the buttons are all the same color - if I am currently on [say] page 3-How can I me key menu 3 to change color and state that I am on page 3?

  I have 6 buttons on the navigation bar that point to 6 different pages - the buttons are all the same color - if I am currently on [say] page 3-How can I me key menu 3 to change color and state that I am on page 3?   using DreamWeaver CC

  Among the contributors here has a nice page explaining how to do what you want, using css.

  Indicator of persisting in the Menus - Page http://alt-web.com/

• How to choose the same color in the text and objects?

  Hello

  I have a document with about 30000 objects include text, small filled circles and paths between the circles (see small screenshot attached).

  

  I need to separate into groups based on color in order to later completely redraw. I would like to be able to select all elements with the same color but the problem being that the railways have only line-color, the only circles fill color and text only-color of the text. I can't seem to find the correct command in "identical". Any ideas of how I could do?

  Thank you very much!

  PER DAY

  more precisely what you're asking is done in the following way:
  Since you have only 3 types of select:
  First set up your magic wand by double-clicking on it in the tools Panel and configure it to contours and funds, also you can bump the tolerance up to about 75. now select your text object , and then use select even--> fill color, this should get your filled objects also, then with the magic wand tool, shift click the same traits in the selection of color and you should have all 3.  Now put it in the layer that you want, save the selection, there are other more obscure options.

  However if you just divide it into groups... try this:

  go to your layers panel and make a layer for each color

  use the same for each type.  for example, select same line color for all similar objects outline color, and then drag the color "block" in the layers panel to the appropriate layer.  Repeat for every thing.

  Finally, if you just want to change the colors on the fly, for something so huge, try edit--> edit color--> work Recolor

  Just play with it, you will see only a few colors, double click on the box, the arrow worms with color in it and (with illustrations to redefine colors in the verified corner) you will see change as you select the new color., in

  I am interested in the most direct way, if anyone knows, something which would, in one stroke, select objects containing color wherever it is.

• Export to PDF and print the same color swatch - different variations of color on printed documents

  I have several documents - they all get to the top in the same way.

  I have 2 or 3 shades in each of them - namely Rubine Red gives me a problem - it's the same shade in all the documents!

  ===============

  The Swatch

  

  ===========

  Color adjustment

  Here's my color settings - exactly the same in each document - I also used profiles 'convert' and made sure all is exactly the same.

  

  =================

  Export in PDF format

  When I export to PDF - export looks great - and all colored frames appear exactly the same - and they give the same exact color read outs in any profile I have watch in preflight Manager

  CMYK reading is 4/20/99/0 in all mailboxes

  ====================

  The result printed

  
  

  

  ==================

  Same color settings

  Swatch even and the same values of swatch

  Same PDF export options

  Same swatch on output values

  Only 1 file prints the correct along the color

  
  

  ====================

  PDF export settings

  Test file

  Can someone help me with this?

  The printer I use is a XeroxColorQube using the PS driver.

  Windows 7

  Adobe InDesign CS5.5

  Fully updated

  Looking at your PDF fills the area is all the same RGB values (so you will never get the 0 | 100 | 15 | 4 process CMYK output value will show you to the #1). The upper area has its overlay set to false and the other 3 have overprint set to true, then it may be that your Xerox printer is not happy with the different RGB overprints.

• When I use firefox now, I don't see with tab I work, they all have the same color (I got like 5 different ones on this subject is difficult).

  I have installated 10 Windows, now all tabs are the same color and I can't see with tab that I work.

  This can change the colors of the tab,

  Restorer Classic theme (Customize Australis) {web link}
  Restore the tabs squared, appmenu, modules, small display bar icons and more on Australis UI (Windows/MacOSX/Linux + Fx 29 +).

  This will restore a lot of things the latest updates brought.

  http://forums.mozillazine.org/viewtopic.php?f=48 & t = 2827985
  Restorer of classic theme - thread (v2)

  [email protected] Classic theme restaurateur - Support E-mail

  Separate the issue;
  Shows details of the system;

  Plug-ins installed

  Adobe Shockwave for Director Netscape plug-in, version 12.0.2.122
  Adobe Shockwave for Director Netscape plug-in, version 12.1
  
  Having multiple versions of a program can cause problems.
  You must remove older programs. Then download the current full installer.

  Shockwave Director:
  Shockwave Standalone install / Uninstaller {web link}
  Shockwave Director Version 12.1.9.160 http://get.adobe.com/shockwave/

• Highlighted text - impossible to use the same color next time.

  I'm a pastor by using Pages to write sermons and teaching materials.  I like to review the text and highlight certain phrases, words and paragraphs.  If I want to emphasize two selections back to back, it let me use the same color.  I select a different color, select the color I want.  I think it is an improvement that needs to be done, which allows you to select the color even overtime, but how do I do differently or how to make the requested change to a future update?

  John

  Menu > Pages > Pages comments

  Just be aware that the prayers of Apple are rarely answered.

  Peter

• Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  I'm going to assume that you plan to have wireless devices.

  Let's say that the Capsule is your "main" router  If this is the case, then it must be located in the House, so that the distance between the time Capsule is the same for the outside walls of the House.

  Then, on the 'left' side of the House, looking for an airport to midway between the Capsule and time of the outer wall of the House. Do the same thing the 'right' side of the House.

  In other words, each of the two airports that "extend" the wireless signal are located at equal distance from the Capsule of time... but they are in opposite ends of the House.

  If you intend to interconnect all the airports and Time Capsule using a permanent, Ethernet wired... which by far is the 'best' way to put in place a network in terms of performance and reliability... then you can locate one of the devices anywhere you want.

• How to set all the same color curves

  Hello

  I have some data that I needed draw and want to draw all the curves of the same color.  Normally I just select each individual curve adjust settings, but there are more than 12,000 curves and the manual process would take forever.

  Any ideas?

  Yes, I 2012

  I eventually settled on this

  Dim oMyCurves, oMyCurve
  
  View.Sheets (1). Areas (1). DisplayObjType = "CurveChart2D".
  
  Set oMyCurves = View.Sheets (1). Areas (1). DisplayObj.Curves
  
  For each oMyCurve in oMyCurves
  
    oMyCurve.Color = "other colors".
  
    oMyCurve.ColorRGB = RGB (211,211,211)
  
  Next

  However, it takes very long.

• Is it possible to draw the same color for each curve automatically

  Hello

  Is it possible to draw the same color for each curve automatically. I use graphic XY basis with data set.

  Lol you'll either need to set the properties through the dialog box.  Or use the nodes property of the graph to adjust the Active plot and then set the color of the plot.  This can be done in a loop For.

  

• keep the same color of track of a multiple XY graph

  Hello world

  I want to draw the last 5 plots on the same XY graph with different colors. For this I use a shift register. Using registers at offset makes the colors of the plot change.

  ex:

  Imagine that I chose the parcel 1 to be red, parcel 2 orange and 3 yellow plot (graph XY properties)

  When I start the VI is what happpens

  First parcel of iteration: Red

  ----------

  Second plot of iteration: Red

  First parcel of iteration: orange

  ----------

  third parcel of iteration: Red

  Second plot of iteration: orange

  First parcel of iteration: yellow

  The shift register makes the landslide down making the new plot always in red.

  What happens if I want the plot to keep the same color, even if they are shifded? (first iteration plot always in the red and the second in orange...)

  Thanks in advance,

  F

  Then initialize an array of 5 parcels.  Subset of table replace to replace each parcel in order.

  

• Lack of voice and data at the same time kills me

  After using a treo 750 (WM 6.1) on att for the past three years, I guess I did not realize the advantage of ATT and gsm in general.  There are many drawbacks... mainly pricing for simple accounts (However their family plan was directly comparable to those of sprint).  I constantly try to use data applications while talking on the phone without success.  I started thinking that I could do without, but a week later, I still really really miss.  My wife did too... because she's I usually give directions or any other web information while on the phone.  There is nothing like view google satellite map to help someone make sure they are in the right place... "see a big tree on your right with a large Brown building behind it, Yes, it's that one" does anyone else have this feeling?  WiFi is not an option for me most of the time.

  Voice and data at the same time is not available when using any CDMA network due to network constraints. This is true for all types of phones, not only Palm or not only the Pre. Your example of electronic control or by using google maps, the gps data that can be stored before you activate the call. try to browse the web while making a call and try to go to a web page, you have never visited before, so that you know, that he cannot be a version collected page.

• Running the Single Instance and RAC on the same server of different homes.

  Hi guys,.

  I already have 4 node RAC12c installed on OLE 6.

  I'm planing on some of my other 12 single instance databases on other migration for RAC nodes.

  Please correct me here if I am wrong...

  My understanding is that, to be able to use DBCA or rconfig for conversion of database instance RAC, the only instance and RAC cluster must run on the same server or machine node.

  Thanks to this understanding... Am planing on the installation of a binary single instance on one of my cluster node node1 say and then use RMAN to duplicate the single instance or just an RMAN restore from the node of the instance that is unique to this node1. Am capable of this plan must then use DBCA or rconfig to convert the CARS database.

  Now, my question is can I run a single instance and RAC on the same server for different homes with different database ports?

  2. for these unique instance that runs on the server RAC 1 node, can I use the RAC database listener that runs from the House of the grid or I have to create another auditor?

  Thank you in advance and also let me know if I can use DBCA or rconfig when the only instance and rac database are on separate nodes.

  K

  Fix. And that's what I would normally do. In general, I would have just an ORACLE_HOME directory that can be used by the punctual and RAC databases at the same time.

  See you soon,.
  Brian

• In the book module page numbers are the same color as the text of the title. How can I change the color of the page numbers in black?

  In the book module page numbers are the same color as the text of the title and I would like that the numbering of the pages to be black. How can I do this?

  Click the mouse cursor exactly on a Page number where it appears on a page.

  Set the color of the characters in the Type Panel.

  "Type" parameters are related to each field Photo text, the text of the Page text, text number of pages, which allows you to set the Style of individual text for each of these three "areas".

• Hello!  I want to take advantage of the Black Friday for student agreement. However, I already have a plan that ends in a few months. Can I cancel this plan and then use the agreement of Black Friday? Thank you!

  Hello!  I want to take advantage of the Black Friday for student agreement. However, I already have a plan that ends in a few months. Can I cancel this plan and then use the agreement of Black Friday? Thank you!

  Hello

  You will need to speak with sales of Adobe for the same thing.

  Contact us | Adobe

  Kind regards

  Sheena