Do you want to save the changes that you did in fact 10g.

Similar Questions

• You want to save the changes... no changes to save

  Hi guys, I am currently have a relationship master detail, but I have a problem. When a query is entered in the block of my master, it automatically queries the retail block, that's fine, however, if I then enter a new query, so switch to query mode in the main block I get a call asking me if I want to save the changes, but I did not bring any changes.
  
  However, I have an idea of the cause of the problem. I have 2 data elements not on my block of detail that are just there to provide additional information to the user. How they work, that is, when the retail block id is made again, I have in a post request trigger that I opened a slider and bring back data from another table and display it to the user of these data elements NOT. However, I do not think that there would be a prompt to save changes under this descriptive would in a database not element. I'm just assuming it's my problem.
  
  Someone at - it ideas how I might solve this problem?
  
  Thank you.

  changes on components of database not also set the status to change.
  After that manipulations in your code after query, add

  SET_RECORD_PROPERTY(:SYSTEM.TRIGGER_RECORD, :SYSTEM.TRIGGER_BLOCK, STATUS, QUERY_STATUS);
  

  to reset the registration State.

• Get the message "do you want to save the changes you made?

  Hi all
  
  I activated the zoom for the standard form of profiles (applications developer) open a new custom form that is used to enter additional information for profiles.
  Two fields profile option id and the profile on the new form option name should get the value in the calling form. Based on these values the new form should show the custom intermediate table data if the record exists.
  If there is no data in this profile of the user must be able to enter information and create new record and commit to the DB table.
  If there is data in the file should be displayed and if the user updates of any field, you have to refresh the record in the DB table.
  I created two new parameters in the new profile_option_id and profile_option_name form which gets its value from the calling form through the custom.pll changes.
  Now, when the new form opens, I see the 2 default fields. But it pops up the message "do you want to save the changes you made?
  If I say no, then the data are displayed for the existing record. If I click Cancel, and then nothing happens.
  Please help me to understand the reason for the pop-up message when the form is opened.
  I changed only a TIME-NEW-FORM-INSTANCE trigger to the new form.
  
  Start
  If (: parameter.profile_option_id is not null) and (: parameter.profile_option_name is not null)
  then
  set_block_property ('NAPP_USR_PRF_OPTIONS_TBL', DEFAULT_WHERE, 'profile_option_id =' |: parameter.profile_option_id |) "(ET profile_option_name = ''' ||: parameter.profile_option_name || ''');"
  : NAPP_USR_PRF_OPTIONS_TBL.profile_option_id: =: parameter.profile_option_id;
  : NAPP_USR_PRF_OPTIONS_TBL.profile_option_name: =: parameter.profile_option_name;
  end if;
  GO_BLOCK ('NAPP_USR_PRF_OPTIONS_TBL');
  execute_query();
  end;
  
  I use form 10g and DB version is 11.2.0.2.0
  
  Thank you
  Chrystel

  Hi Olivier,.

  : NAPP_USR_PRF_OPTIONS_TBL.profile_option_id: =: parameter.profile_option_id;
  : NAPP_USR_PRF_OPTIONS_TBL.profile_option_name: =: parameter.profile_option_name;

  GO_BLOCK ('NAPP_USR_PRF_OPTIONS_TBL');
  execute_query();

  After having assigned the value in any field and then using exectue_query triggers the message.
  If option 1 is...
  If you need to assign then first use execute_query; then assign a value

  Option 2 is...
  Use commit_form and then use execute_query;

  I hope this helps...

  Hamid

• Do you want to save the changes you made

  Hi guys,.
  
  I need your help
  
  I ve a form that retrieve data on employees.
  
  There are 8 blocks in the form,
  
  I created a when trigger click mouse to display a LOV
  
  
  declare
  a Boolean value;
  Start
  a: = show_lov ('TEST');
  pc_execute; -calling a procedure
  END;
  
  but it gives you want to save the changes you have made?
  and I tried to delete it by setting the level of message system = 25
  but no advantage,
  
  And if I write:
  declare
  a Boolean value;
  Start
  a: = show_lov ('TEST');
  GO_BLOCK ('ORG_EMP_INCREMENT_HISTORY');
  pc_execute; -calling a procedure
  END;
  
  the message will disappear, but the query will run not all blocks
  
  
  ANY suggestions
  Best regards

  El-Hamdulellah

  Pls to mark your Question and the correct answer...

  and erase what was you meant to do?

  To help others with the same problem...

  Kind regards

  Abdetu...

• How to remove the warning "do you want to save the changes to investigation.pdf before closing.

  Question: To remove the warning "do you want to save the changes to investigation.pdf before closing.

  I created a file of pdf XFA (using the LC Designer 8.2) to view this issue

  I can't attach PDF file. Without attaching the pdf file, it would be difficult to explain.

  Click event js:

  function activateUser() {}
  var PDFVersion = xfa.host.variation + xfa.host.version;
  xfa.host.messageBox ("registered button click event");
  XFA. Form.Form1.sendForm.welcomeMsg.Presence = "invisible";
  XFA. Form.Form1.sendForm.successMsg.Presence = "visible";
  Event.Target.Dirty = false;
  };

  docReady event js:

  function displayInfo() {}
  var res =xfa.host.variation;//Added this line to display the successMsg
  xfa.host.messageBox ("docReady event recorded");
  XFA. Form.Form1.sendForm.welcomeMsg.Presence = "visible";
  XFA. Form.Form1.sendForm.successMsg.Presence = "invisible";
  };

  docClose js event:

  xfa.host.messageBox ("docClose recorded event");
  Event.Target.Dirty = false;

  Steps to get the caveat:
  (1) open the attached pdf using Acrobat Professional.
  (Bouton 2) click on registration to confirm.
  (3) now close the document and the Acrobat gives a warning "do you want to save the changes to investigation.pdf before closing.

  The XFA pdf summary:
  It has two text fields. DocReady event field has done this & field B is rendered invisible.
  The button click event of the field made invisisble & field B are made visible.
  Closing the pdf should not raise this warning message.

  My Efforts:
  (1) found a property in js adobe docs.
  Event.Target.Dirty = false;
  It does not solve the problem.
  (2) I tried to put this logic in almost all the events listed in the designer, but I'm not able to solve the problem.

  Please help me solve this problem.

  Hello

  Change the visual appearance is dirty the screen, before all data are actually entered in the form. I've seen this before.

  I think that the docClose event is too late to have the sale/requiresFullSave script. preSave does not either, as this is triggered after the warning dialog is displayed.

  For a test, I would put the sale/requiresFullSave script in the layout event: loan. Not the most efficient, but he should do after changing the visibility of the messages.

  This could be interesting: http://cookbooks.adobe.com/post_How_often_events_fire_and_their_sequence-16547.html

  Niall

• Graduation: Do you want to save the changes? When there is no change?

  Forms [32 bit] Version 10.1.2.3.0 (Production)
  Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64 bit Production
  
  I have a form that always pushes me if I want to save the changes after interrogation of a record and then go out or try a new query. I don't know what changes he asks if I want to save that nothing has been changed on the form. Is there a way to follow what is the cause or whence it?

  Most likely in the trigger after query you assign a value to one or more fields (database item) or no database element.

  If it's an article from the database no it's to be assigned to a value the following code in the post once the transfer could help:

  SET_RECORD_PROPERTY (GET_BLOCK_PROPERTY (: SYSTEM.)) TRIGGER_BLOCK, CURRENT_RECORD): SYSTEM. TRIGGER_BLOCK, STATUS, QUERY_STATUS);

  If you assign a data point value check why you do so.

• Useless the question «Do you want to save the changes...» »

  Hello again,
  
  I have a block of several recording on the single update is allowed and two buttons: accept and reject. There are three possible ways of changing records:
  1. change the values in some fields and validation - which works very well;
  2. changes to the values in some fields and tap on accept button;
  3. change the values in some fields and press the reject.
  
  Buttons have implemented the delete, update, insert into some tables using a stored pl/sql package. At the end of the treatment, for the two buttons, "accepted" or "rejected" folder disappears from the block - using execute_query. Problem is that if some values were changed before pressing the button, warning window appears: "Do you want to save the changes you made?" which is in this case useless and boring. How can I get rid of this message?
  
  Thank you in advance.

  execute_query (no_validate)

• Do you want to save the changes

  Hi all

  6i dev,

  I always get him 'do you want to save the changes you have done"message when I open my form and try to run the query.

  without to make anychanges.

  ??

  Thank you

  I found it, I'm assigning a value to an element in a trigger a time new form instance

  Thank you

• After query do you want 2 save the changes you made

  Hello
  
  If I run a query for a form master / detail and press an Exit_button
  
  A message will be displayed in the form: (do you want 2 save the changes you have made) or NOT
  
  I don't want to use:
  

  EXIT_FORM ("NOT OK");

  I have 2 codes in a post request
  

  BEGIN
  
  SELECT ITEM_ID ,ITEM_NAME
  INTO   :ITEM_ID ,:ITEM_NAME
  FROM    WH_ITEMS
  WHERE ITEM_SERIAL =:WH_T_ITEMS.ITEM_SERIAL ;
  
  EXCEPTION
  
    WHEN No_Data_Found THEN       NULL; 
  
   WHEN OTHERS THEN
            
            Message ('OTHERS' || SQLCODE || ' And ' || SQLERRM);
            Message ('OTHERS' || SQLCODE || ' And ' || SQLERRM);
            
       
  END;
  
  
  ---====================================
  
  
  
       
  BEGIN
  
  SELECT WH_STORES.STORE_NAME
  INTO   :WH_TRANSACTIONS.STORE_NAME
  FROM   WH_STORES
  WHERE  WH_STORES.STORE_ID =:WH_TRANSACTIONS.STORE_ID ;
  
  EXCEPTION
  
    WHEN No_Data_Found THEN      NULL;
    
          
   WHEN OTHERS THEN
            
            Message ('OTHERS' || SQLCODE || ' And ' || SQLERRM);
            Message ('OTHERS' || SQLCODE || ' And ' || SQLERRM);          
            
  END;
  
  --===============================================================

  But I want 2 know why?
  
  
  Kind regards
  
  Abdetu...

  Database is perhaps one of these columns

  IN: WH_ITEMS. UOM_ID,: WH_ITEMS. STP_UOM_NAME

  If Yes, delete the select statement.

  -Clément

• Acrobat request "do you want to save the changes?

  Example a PDF in "PDF Reference version 1.7" in Appendix G, result in Acrobat Reader, showing a popup "do you want to save changes to... before closing? Why this even when popup any changes made to the document? How to get rid of this popup?

  Hi carriek34182695 ,

  You will need to disable the safe_mode for this.

  Please navigate in Edition > Preferences > under categories, select "Security (Enhanced)" and uncheck the option 'enable protected startup mode '. Click Ok and restart Acrobat Reader.

  

  Let us know if that helps.

  Concerning

  Sarojini

• Requested help recovering from the change that I did for the 'Public' of Vista Home Premium file permissions for everyone

  I made a blunder when changing the permissions of public folders for everyone.  I am now connected to Vista Home Premium on my home PC as an Admin will be complete permissiongs.  When I right click on the folder Public, pooling and property options are both now gone.  How to restore the availability of these options?  Also, I can access to is no longer the files that I previously copied into the Public folder.  How can I restore my access to these files?

  Have you started with elevated privileges command prompt? Just running in the administrator account is not enough. Looks like you don't have because it starts in your user directory. If you were high would begin in the Windows\System32 directory.

  See: http://windows.microsoft.com/en-US/windows-vista/Command-Prompt-frequently-asked-questions

  Orders, you should get something like this:

  Takeown /f /a C:\Users\Public
  ICACLS C:\Users\Public/Grant "BUILTIN\Users: (F)".
  ICACLS C:\Users\Public/Grant "Administrators: (F)".
  Takeown /f C:\Users\Public\*/a
  ICACLS C:\Users\Public\*.*/Grant "BUILTIN\Users: (F)".
  ICACLS C:\Users\Public\*.*/Grant "Administrators: (F)".

  I can't guarantee that this will fix your system. You must give permissions for the system and other users accounts.  If you have access to another system, I would compare the settings there. These programs will help you determine the permissions associated with a system

  • AccessChk http://technet.microsoft.com/en-us/sysinternals/bb664922
  • AccessEnum http://technet.microsoft.com/en-us/sysinternals/bb897332

• When you close the form "Do you want to save the changes" window

  Hello
  I have a master form / detail where in my trigger after QUERY I change the item field data of LOV to a value non-base. When I simply select Master record(NOT in query mode) my detail records pop up in the retail block. This is done in EXECUTE_QUERY in trigger a TIME NEW BLOCK INSTANCE in detail block. But when I close the form he's asked me to save changes even though I haven't changed anything. I have this statement after QUERY Trigger
  SET_RECORD_PROPERTY(:SYSTEM.) TRIGGER_RECORD,: SYSTEM. TRIGGER_BLOCK, STATUS, QUERY_STATUS); This problem doesn't happen in QUERY MODE.
  
  I tried the two Set_Item_Property('BLOCK.) CODE', ITEM_IS_VALID, PROPERTY_TRUE); This property in the POST_QUERY and the Set_Item_Property ('item_name', VALIDATE_FROM_LIST, PROPERTY_TRUE); in QUERY-MASTER / DETAILS trigger but it did not work.
  
  Help, please
  
  Thank you

  If you take the second codepart, you may need to add a CREATE_RECORD in the last ELSE like:

      ELSE
        -- No master-record, found, use has to enter data, FK_ID can be pre-populated from the LoV-Selection
        CLOSE crCheck;
        -- Create an empty reocrd here
        GO_BLCOK('MASTER');
        CREATE_RECORD;
        :MASTER.FK_ID:=:BL_CONTROL.IT_FK_ID;
      END IF;
  

  I hope this helps.

• Photos app does not save the changes, impossible to edit photos without using other applications

  'Photos' of photo editing features does not work because it is impossible to save the changes. Photos can be edited as usual, but trying to save the changes that the photo is reinstated to the State of origin regardless of changes. There is no error message, to solve the problem, I tried to reset all settings, but it did not help.

  I have iOS 9.2.1 on an iPhone 6 s.

  Thanks in advance for your advice

  I have the same question since getting my iPhone 6. Very frustrating. Several times the photo says even "revert to original" even though the changes have been never applied, as if he thinks he has saved the changes. I asked for help with an apple store and they had never seen before and had no suggestions.

• What can I do? I just change a pdf file, after you finish and save the changes, the stroke of the Acrobat Reader and lost all my changes, how do I get back them, he had a lot of work.

  What should I do toget back the changes that I made a PDF doc because Acrobat just stops?

  Hey Woisix,

  The auto save feature prevents changes to PDF since be lost after an unexpected interruption.

  Open the file to which you were changes. When you are prompted, click Yes to open the automatically saved files.

  If auto-save is turned off, then restart of the Preferences dialog box.

  Open Edit > Preferences > Documents and check "automatically save document changes to temporary file every XX minutes" and specify minutes for how often you want to save changes to the PDF files.

  If this feature has been disabled, so it is not possible to recover lost in the PDF file changes.

  Kind regards

  Ana Maria

• other browsers allow to choose from "never save the password 4 this site": do you really think I want to save the password for my paypal, example 4?

  It of a shame that we can choose only beetween "Save password for this site" or "not now", while for certain Web site, we never really want to save the password, generally for sites like paypal...

  Hi, you can do that in firefox so well - click on the dropdown arrow at the bottom left.