Document routing
I have an irritating problem with W7 64 bit that did not exist in W7 32 bit. Under username \Users\[my]--------... I have the usual My Documents folder, which is of course known simply as Documents. However, my W7 64 bit continues to insist on opening a file of Documents directly under C:\. If I delete it, it just gets re-created. When I want to place an attachment in an Outlook email, it's where it looks like a number of other applications put copies of files. These things didn't happen under W7 32 bit. Y at - it a setting I have to turn?
Case is ignored.
Tags: Windows
Similar Questions
-
Need details patch to see the field Id of Document Routing
Hi all
I went to metalink to have downloaded the patch * #6673231 * for the routing of the Document Id field , including in the OracleAS B2B integration but I'm confused with the platforms which we proposed
I'm working on the platform Microsoft Windows 2000 Professional , but this platform is not suggested in this patch(#6673231), the platform its display is
Microsoft Windows Server 2003
So the patch above is applicable for the Microsoft Windows 2000 Professional platform, or is there any other fix for this particular platform, if there is no everything can get the number of patch or total link to fix the problem for which the Id field in routing Doc in Oracle B2B.
Thank you
Sunny
Download 6673231 for Microsoft windows 2003. It works for the generic windows platform.
-
Documents appear suspended in the spooler.
When printing, all documents for all printers show paused in the spooler on Vista PC.
Need to go in the spooler and return the documents to print.
Vista 32 SP2 and HP and Epson printers running.
Removed all of the printers 'Printers' in Vista, re-installed Epson printer.
Downloaded new drivers for the printer.
Epson is connected to the network via a wireless connection to the router.
Printing from Windows 7 PC print immediately. (No Documents suspended in the spooler on this machine).
Looked for a setting 'Pause all print jobs in the spooler' but cannot find any setting in the printer software.
Is there a setting for the spooler somewhere that I can put to allow printing immediately?
Thanks rod
Thank you for the information. Method 1, printer was not suspended.
Method 2, interesting... After I stopped and started the spooler, I could print without pauseing Wordpad document, but when I closed and open WordPad and tried to print again, the document could be suspended.
Method 3 I deleted the printer on PC problem then ran Fixit, then added to the printer, open WordPad, and tried to print again, the document could be suspended. I restarted the PC, but this time, I noticed a message Windows Popup on Equitrac Document Routing Engine has stopped working. This doesn't sound good and I thought it was related to printing so I set up the motor to take no action to anything he was trying to do. Now, I can print without the document being suspended.
I need to go through a bunch of tests more, but if everything ok after Tuesday, I consider it fixed.
Thank you
Hello
Thank you very much for this information. If the problem persists after the tests, please read back to us so that we can help you solve this problem.
-
State of the PO workflow and how to disable the workflow IN.?
Hi all
How to check the status of the PO workflow and how to disable the workflow PO in oracle 11.5.10.2?
Thanks in advance.
SyedPlease see these documents.
11i: Oracle purchase Po approval collecting test data [ID 361880.1]
11i: iProcurement activity Workflow Status of approval [ID 224583.1] Test
(Photos) How to capture Debug / Log / Trace of files during the purchase order / request for approval process? [409155.1 ID]
How to diagnose a purchase approval of Document routing [ID 603232.1]Thank you
Hussein -
B2B deployment replaces the selection of Action for Inbound
Hello
Here's the script, please let me know what configuration error, I do and to give me any possible fix or work around.
a. Host_TP_AS2_ID_1 & External_TP_1-> Agreement_A-> BusinessAction_A-> Document Protocol_A Rev-> DocumentType_A-> DocumentDefinition_A
b. Host_TP_AS2_ID_2 & External_TP_2-> Agreement_B-> BusinessAction_B-> Document Protocol_B Rev-> DocumentType_B-> DocumentDefinition_B
Definition document both A and B as follows...
DD for A:
Role: Host_TP_AS2_ID_1 (host)
Role: External_TP_1
Identification (XPath) Expression for the XML Document: / * [local-name () = "Pip3B12ShippingOrderConfirmation"]
Document routing ID: DT_Pip3B12ShipOrderConf
DD for B:
Role: Host_TP_AS2_ID_2 (host)
Role: External_TP_2
Identification (XPath) Expression for the XML Document: / * [local-name () = "Pip3B12ShippingOrderConfirmation"]
Document routing ID: DT_Pip3B12ShipOrderConf
When I create a new deployment of 'a' and deploy, the entrants is the right agreement for Trading Partner identifiers, the Action of companies entrants and treat successfully.
When I create a new deployment for 'b' and deploy, the entrant is unable to find the good deed of the company, it error saying to Host_TP_AS2_ID_2 & External_TP_2, not able to find the 'BusinessAction_A '.
Now the question for the second series of combination of trading partner ('b'), why is he looking for Business Action of "a."
The interesting part is, if I deploy the 'b', 'one' and first second, the error is the opposite effect.
Someone client encountered any B2B type of problem like this. Is there a solution, correction or work around that kind of question.
Thank you
BalaHere are the commands to stop/drop/create/start the AQs (change the name of the queue according to your requirement ("B2B. IP_IN_QUEUE)):
Run dbms_aqadm. STOP_QUEUE('B2B.) IP_IN_QUEUE')
Run dbms_aqadm. DROP_QUEUE('B2B.) IP_IN_QUEUE')
run dbms_aqadm.create_queue (=> queue_name ' B2B.) IP_IN_QUEUE', queue_table => ' B2B. IP_QTAB');
Run dbms_aqadm. START_QUEUE('B2B.) IP_IN_QUEUE')You can use this to QA in DB and create the delivery channel internal B2B with point to these queues for your usecase.
Rgds,
Nitesh jegou -
This document fuck my girlfriends Internet: changed router and now cannot connect settings
I took my lappy at my home of gf, connected up to its wireless internet connection, pressed a few buttons, and now when it wants to connect to its connection through his own laptop, it can not get on because I don't know the password, I tried the numbers on the bottom of the router Please help im going to get killed by her and her daughter, thank you
You may need to reset the router to factory settings and set up once again, if you have played a bit with its parameters.
See you soon.
Mick Murphy - Microsoft partner
-
Configure Airport Express with D-Link router
I am currently using a router D-Link with my MacBook. I want to use Airport Express plug my MacBook on my amplifier. When I tried to set up the Airport Express, Airport utility can't find it. I can't connect the Airport Express Terminal to the D-Link router by ethernet cable, because the amplifier that I connect it is too far from the telephone jack.
You use the wireless bridge mode... what apple being different named wireless client mode.
See AirPort Express: what is client mode?-Apple Support
It is the oldest document but seems to be more up-to-date.
AirPort Express: How to join an existing client mode - Apple Support Wi - Fi network
-
The links are located on the emails I receive from authorized sources. When I click on the links to read the additional documents (another document) or display a picture, I get a blank page with a single point in the middle of the page. The tab header says it's an image (1 x 1 pixel) PNG. Any suggestions to fix this?
Often, links to email in bulk are routed via a follow-up rather than service directly to its final destination. If you look at the address bar on the image page, it seems like one of these intermediaries rather than the page you expect to load? If you click on the address bar and press ENTER to retry the address, which does nothing?
It is possible that the security software or security add-on kills a redirect from this intermediate page to the final destination. For example, I think the anti-banner Kaspersky functionality could do that.
-
Can I create an Airport Extreme (current generation) network of roaming with a cable modem/router xfinity manufactured by Cisco (DPC3939 to be exact)? The modem-router Cisco/Xfinity put into bridge mode?
Can I create an Airport Extreme (current generation) network of roaming with a cable modem/router xfinity manufactured by Cisco (DPC3939 to be exact)?
Yes, if the Airport Extreme will be connected to the Cisco DPC3939 back using wired Ethernet wired, permanent.
The modem-router Cisco/Xfinity put into bridge mode?
No. I you have done this, the Cisco/Xfinity device would only act as a simple modem... so it would not be a wireless service to all.
A note of caution here... the support document you are referencing... Wi - Fi base stations: install and configure a roaming network (802.11 a/b/g/n)... use the examples that are long outdated does not follow with the versions present on a Mac AirPort Utility or iPhone/iPad.
There are some good general information in the document.
-
When I go out or go to bed at night, I disable my wireless internet router. Sometimes I turn off when I just do something that doesn't require me to be online. Whenever I do this, Firefox continues implementing a warning window every two minutes telling me that I have no connection (that I know). How can I disable this window alert so it isn't keep appear in the middle of a game or a document that I do?
Its an addon, not firefox.
Start Firefox in Safe Mode to fix the problem and to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).
-
How can I find the IP of my router?
Information is included under this specific document-
http://support.HP.com/us-en/document/c01066869
I worked for HP.Open the command prompt window and type "ipconfig" without the quotes. Then look for the gateway by default - this is your router's ip address.
-
AirPrint is not working since 9.3.1 what airprint update - not found. tried the suggestion of JimHdk, who worked for a single document. any suggestions
Since we do not know what may have suggested to Jim, power cycle your router and the printer and force restart the iPad. Unplug the router and the printer power for 30 seconds. Plug in the router first and let it restart. And then reconnect the printer power supply. Then force restart the iPad. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.
-
HP divided x 2: I updated the setting on my hpx2 now can't find my router
I updated the m has split x 2 HP laptop settings. I knew that I release software that will reload.
Now, it can't locate my router. When I implement the new network it does not locate a router?
Ideas?
Hello
I found this for windows 8 / 8.1
http://support.HP.com/us-en/document/c03430118
If it does not help you, please give us the product # of the unit, we will try to get the right drivers for you.
-
How to print documents on my Samsung Galaxy 4 Note to my wish 7640.
I installed the application all-in-one printer for my desire 7640 on my new cell phone running Lollipop (Android 5.0.1). I access my router wireless from my phone. The application sees my printer and reports the status of the printer correctly. However, I can't understand how to print a document (PDF or text) of my phone. Is it possible, or is it not even correctly works on pacifier? My phone is brand new and improved lollipop in the first round on. I just bought my printer a few days ago.
Hello
They are (printer and Samsung) on the SAME network? If so, please
(a) the app, touch
(b) the print/share button,
(c) press Documents.
(d) select the document on the list to print and the lauch
e press Options (upper-right) and select print.
Kind regards.
-
HP 6830: same document while the hp 6830 reprint
My new HP 6830 prints all the time, no matter what I do the same document.
I deleted the queue of two PCs on my home network. I've restarted both computers.
I rebooted the printer and restore factory (several times).
I restarted the wireless router and its repetition.
Printer is reconnected to my wireless network as soon as it starts print same document
Once again.
Help!
Hi, in my opinion, it is not related to the printer itself, as the print job starts only when you establish a connection,
so if you notice that the bottom of the list is empty, maybe it's a bug, so it seems empty, but to be sure, you need to access this path and remove any file that you find,
C:\Windows\System32\spool\PRINTERS
and see what happens
Hopefully that stops the invasion of printjob
Maybe you are looking for
-
Satellite P100-160 BT icon appears in the Control Panel, but no BT
Hello I have a Satellite P100-160. I am very confused as to whether I have BT or not. * Reasons I thought that I had BT: *.I thought originally I had, because in 'Control Panel', it has a Bluetooth icon, which when I press on it opens the "Bluetooth
-
HP question first calculator spreadsheet App on data entry
On my current spreadsheet that I work on (and in fact, this question would apply to these 2 cards I have to do as well)... I have my column A implemented as labels and my column B put in place as input. So A1 tells me what type of input B1 is expecte
-
Want to m6: Catalyst Control Centre: host application has stopped working
Whenever I start my computer, I get the following message every time that a few months: "Catalyst Control Centre: host application has stopped working". A problem caused the blocking of the program works correctly. Windows will close the program and
-
CRASH: Replacement of the enumerations in the State diagrams can shoot down LabVIEW 2012
Environment Windows 8 64 - bit, 32-bit LabVIEW 2012 Steps to reproduce Open the attached draft Open Statechart.lsvc/Diagram.vi Double click on the blue Transition in the Middle, navigate to the guard Make a right-click on the enum constant-> replace-
-
My new HP 6500 has more printer will install properly and paperjam, on the contrary.
This printer is new and I tried new drivers, no Jam (when he's going to say that instead of print). I almost fixed everything on my pc before, but it made me very frustrated. I reconnected the printer several times, but also I do not believe that