Document scanning and recording in the desktop file

I have a #F4180 HP printer/scanner and HP Pavilion desktop computer. How do I scan document and save to a file so I can send it to someone? Assess available. Thank you.

Hi Red714,

Thank you for your answer!

Please take a look through this way to guide the analysis. How Scan: Windows 8.

If you encounter problems, you can also run the HP print and Scan Doctor.

Hope this helps you and have a great day!

Tags: HP Printers

Similar Questions

  • Small batch. Review, edit and save to the desktop file.

    I have 50 or more photos of the weekend. I have already created an Album called 'Birthday 2015' and all images imported into this Album.  I want to review them and keep the top 25 or more.  Then cultures, change and save these 25 only to a folder on my computer desk. I want to move this folder over to a SD card or USB key to send to a family member. They want just the photo files, not a slide show or anything like that.  I want to keep the originals of all 50, as well as the finite set of 25.   This will be my first time using Photoshop elements 13 for what that this or another can touch a single image to print at home.   What is the process for this?  It is an 'event', a 'project' I drop the unwanted, those of the Album (how I do that) or simply to 'save' the finished a separate desktop file I'll?  How do I "save under" the picture over to the desktop file? 

    Thank you

    Mike

    michaelg7242004 wrote:

    I have 50 or more photos of the weekend. I have already created an Album called 'Birthday 2015' and all images imported into this Album.  I want to revisit and keep the top 25 or more.  Then cultures, change and save these 25 only to a folder on my computer desk. I want to move this folder over to a SD card or USB key to send to a family member. They want just the photo files, not a slide show or anything like that.  I want to keep the originals of all 50, as well as the finite set of 25.   This will be my first time using Photoshop elements 13 for what that this or another can touch a single image to print at home.   What is the process for this?  It is an 'event', a 'project' I drop the unwanted album (how I do that) or just 'save' finishes to a file separate from the Office I'll?  How do I "save under" the picture over to the desktop file?

    Thank you

    Mike

    Mike,

    The two following tips should help you:

    -1- creating a new album of an existing

    An album in your current catalog is a list of files, just like a playlist for audio files. If you want a selection (a subset) of these files, you simply create an empty album. Select the view original album, select the required pictures (easy if you have assigned a given star) by the shortcut Ctrl A, and then drag and drop in the new album of emptiness.

    -2-hourly using 'Export' of the Organizer.

    What you want to do, who prepares the files to a new location or media selected, is called "exporter" in the elements or Lightroom.

    When you're in the Organizer, select the thumbnails (highlighted), you must use the menu file/export or the shortcut Ctrl E. The dialogue then you box will allow to choose not only the target medium or the folder where you want to copy your files. More important still, it allows you to choose the file format and size of the exported files and it can rename them in order to preserve the custom in the album sort order.

    Which is a bit more complex is to work with the original and edited versions if you have version ' sets ' and albums at the same time. If you do not use version sets, no problem. You export originals and files published in two different lots with different subfolders.

    If you use sets of version, which means that the edited versions are attached to the original and you have chosen the version to display at the top of the version set in the navigation area. It is only as the displayed version which is exported. People are generally perplexed when they create sous-albums as described above. Whether you have your album ready for export with the edited versions. You want to export the original separately in a different folder. This would mean that you change the display order of versions to show the original as "top version" for each image. The information about the item "top version" are independent albums: If change you in one album, if the photos are also included in a different album, the 'top' of the version will also change.

    The simple solution if you want to export original and edited separately versions would be to export original first, then do the editing and export the edited versions shown in your albums.

    Once you have the version sets in your albums, you can't easily get to the originals. This would mean using the menu edition/version the value to be converted into individual elements and lose the link between the original and edited version.

    I should mention that the use of the albums is a way to use the Organizer to export your selected objects.

    If you are using categories and keywords, you can select (highlight) your files and export as explained above.

    You can also use the menu file/export to media removable (Ctrl + Shift + O) to copy to flash drive or SD card.

  • I can't save a picture of me as a photo account. It comes out there's an error in the recording of the jpeg file. It is in 'Downloads' and 'Documents' in the finder of my iMac 27 5 k. Can someone help me? Should I change extension or what?   Thank you

    I can't save a picture of me as a photo account. It comes out there's an error in the recording of the jpeg file. It is in 'Downloads' and 'Documents' in the finder of my iMac 27 5 k. Can someone help me? Should I change extension or what?   Thank you

    What program Adobe do you use that you have problems with? I can put your question in the help forum.

  • scanned document not to transfer on the desktop after put 10.11.2 updated

    HP Officejet Pro 8610 scanner can be controlled by OS X but scanned document does not appear on the desktop as shown on the details page.

    Update.  File can be found in "All My Files" but it's not the location that was requested on the scanning.

  • Lack of files and folders on the desktop

    I stored a lot of files and folders on the desktop. These files are gone and I can't find them. I tried a system restore based on a time of restoration of this morning and the computer works well. However, the files and folders on the desktop are not returned. THING STRANGE, WHEN I REBOOT THE COMPUTER FOR A FRACTION OF A SECOND I SEE ALL THE FOLDERS AND FILES MISSING AND THEN THEY DISAPPEAR.

    Recently where I found a number of files and folders under my user name.

    You always know the names of file and folder, try to do a search, they could be lot in one place. There are a few programs that automatically move files and predefined folders in folders like "DropIt". Also try to scan your computer for viruses.

  • How to record the numbers and words in the same file

    Hello:

    I did a vi where I record the spectrum and its integration in different positions of a two-dimensional net. I save the information in two spreadsheet with the comand "write to file measure."

    Now, I am recording the parameters initial positions, end X X and space between measurement points. I want a file with two columns that looks like:

    Initial position X 1000

    final position X 2000

    space 100

    But idon't know how to save the words and numbers in the same file.

    As I have to perform several steps I want to automatically choose the name of the file (something like parameters_1, parameters_2...)

    Thank you for your attention

    Hi bitxor.

    You can use all the functions of the WriteTotext file to write strings to a file.

    Then you could set up WriteToMeasurementFile' to add new data to existing files (instead of overwrite or renaming)...

    BTW. It is not a good idea to mix lvm files containing arbitrary spreadsheet data!

  • Why my files and folders on the desktop goes away when I stop or disconnect my computer?

    Why my files and folders on the desktop goes away when I stop or disconnect my computer?

    When I start my computer its message of shows like temporary file is retained and watch the preparing your desktop... can anyone find the answer?

    ·                        Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Read this: http://support.Microsoft.com/kb/947242

    A temporary profile is loaded after you connect to a Windows Vista-based system

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    See you soon.

    Mick Murphy - Microsoft partner

  • Acrobat Reader DC works fine and opens a PDF file without problem - until I have a word document open as well-, then the PDF file crashes. I can't open a PDF file, a word document is also open.

    Acrobat Reader DC works fine and opens a PDF file without problem - until I have a word document open as well-, then the PDF file crashes. I can't open a PDF file, a word document is also open.

    For troubleshooting, you can disable the Protected Mode (https://helpx.adobe.com/reader/using/protected-mode-windows.html#id_94783) and see if that solves the problem. If the problem persists, please re-enable the Protected Mode to improve safety.

    Let us know how it goes.

  • In windows 7 and noticed on the desktop icons, below the left most of my icons are circle red.

    Have windows 7 and noticed on the desktop icons, below the left most of my icons are red circle or square with a white cross in it, what it means?

    Hello

    Could you provide a screenshot, desktop icons?

    The circle has a strikebar through it?

    What antivirus do you use?

    (1) reboot and start typing the F8 key

    Select Mode safe mode with networking

    Download the following and run a full scan

    http://www.Microsoft.com/security/PC-Security/Malware-removal.aspx

    This is to remove the malware invade the system.  Reset when the scan is complete.

    Run the System File Checker

    Start > type CMD > right click on CMD > select Run As Administrator

    Type sfc/scannow

    Press enter

    Use the System File Checker tool to repair missing or corrupted system files

    https://support.Microsoft.com/en-us/KB/929833

    This occurs when the .ico association is corrupt.

    To resolve this issue, follow these steps:

    1. Click Start, click run, and then

      Type regsvr32 /i mshtml.dll
    2. Click OK or press the ENTER key.

    https://support.Microsoft.com/en-us/KB/968486b

  • I have been using InDesign for many years. Last week I suddenly discovered that I couldn't open a document by double-clicking on the desktop or wherever it was. Instead, I now find the document in some folder that is, click on it once, t

    I have been using InDesign for many years. Last week I suddenly discovered that I couldn't open a document by double-clicking on the desktop or wherever it was. Instead, now I have to find the document in the folder it's in, click on it once, and then click file in the bar at the top of the screen, go to open, then it will be open. Any ideas why this happened all of a sudden? In addition, in the bar on the top of a document, I can no longer change the Essentials to advanced or others. Seems to have everything that happened at the same time. Help appreciated please.

    First of all: this has nothing to do with InDesign, it has to do with your OS, so second: what operating system? Windows or Mac because to solve this problem, we need to know which. It's your operating system which has lost the connection with your program and document files.

  • Cannot create a new illustration. Problems occurred during the recording of the print file.

    I can't open a new Illustrator file. He sends me this error: failed to create a new illustration. Problems occurred during the recording of the print file. ID:-1

    I opened a previous document created in CC, but it does not allow me to copy and paste items from one doc to another.

    I rebooted with nothing doesn't.

    System:

    Adobe Creative Cloud CC

    Mac Book Pro 2012

    2.6 GHz Intel Core i7

    8 GB 1600 MHz DDR3

    On a mac, but it seems that it has resolved itself. In my view, that it may have been a corrupted file that threw everything off. Thank you.

  • I created an email link in my PDF document, how do I get the PDF file as an attachment to the email?

    I created an email link in my PDF document, how do I get the PDF file as an attachment to the email?

    You must add a button with the command "Send form" and enter the URL:

    mailto:[email protected]

    (using the real email address you want to use, of course)

  • I'm trying to install Adobe CC on computer 2, a Macbook, and after downloading the desktop CC app I double click in the intall. When it seems to be done to install I'll double-click on the icon of the ourobouros upstairs and I'm rewarded with spinning

    I'm trying to install Adobe CC on computer 2, a Macbook, and after downloading the desktop CC app I double click in the intall. When it seems to be done to install I'll double-click on the icon of the ourobouros upstairs and I am rewarded with the spinning of beach all dead. Any suggestions?

    Hi,

    Please see the below help document to solve the problem:

    Does not open App | Wheels of progress turn continuously

    Kind regards

    Sheena

  • Toshiba 39L4353RB 7.1.56.36.01.1 TimeShift and record on the issues.

    Hello.

    I have Toshiba 39L4353RB with the last aviable f/o 7.1.56.36.01.1 for this model.
    There are no options for TimeShift and recording in the Menu.

    I chose countries Germany, DVB - C (digital TV) CAM module.
    I insert USB HDD, but it there was not all the settings in the Time-Shifting Menu.

    (1) was this option disabled in f/w 7.1.56.36.01.1?

    (2) can I put 39L4353RB manually (by usb flash) for the latest f/w 7.1.90.34.01.1 (another country for L4353 code) to allow the TimeShift?

    You reset the TV after the update of the firmware?
    If this is not the case, first of all do!

    TO use the Time Shift you must go through the configuration of the recording.
    You must choose the HARD disk and partition you want to save.

    What is described in the manual user 51 page-> [Toshiba 39 L manual 4353 | http://www.toshiba-om.net/LCD/PDF/English/L4353-323950-English.pdf]

  • Had two files the same titled and deleted somehow the wrong file - how can I restore it

    original title: deleted the wrong file

    Had two files the same titled and deleted somehow the wrong file - how can I restore it - tried everything

    Hello

    This forum is for comments on the forums for answers. This should arise in the answers-
    Forums for your version of Windows Windows.

    Answers - Windows Forums
    http://answers.Microsoft.com/en-us/Windows

    -------------------------------------------------------------------------------------------------------------

    Recuva - free - recovers files deleted from your Windows computer, Recycle Bin,
    map of the camera digital or MP3 player. And it's free!
    http://www.Piriform.com/Recuva

    Forums - help here
    http://Forum.Piriform.com/

    I hope this helps.

Maybe you are looking for