documentation error: convert the PID Gains

Similar Questions

• changing PID gains

  I use the PID advanced VI to a pressure regulator and had tried to vary the winning entry proportional to the VI using an equation based on other settings, such as the behavior was similar to gain scheduling, only contiguous versus by steps.  Unfortunately, it seems that PID VI cannot handle the PID gains that are continuously variable from iteration to iteration.  The result is zero, and dig in the block diagram of the PID VI, it is barely readable, but seems to do something different in case of a detection of a change in gains of PID.  So my question is, is there a simple way to do what I'm trying to do with the provided screw OR, or am I limited to fixed PID gains?  I couldn't works around the problem by allowing the calculated algorithmically proportional gain will persist for a number of iterations before allowing an update?

  Hello

  Yes, you can.

  Don't forget: create your own copy of the VI before you change! Never change live in vi.lib!

• HP Envy 5534: Envy 5534 on MAC-printing error message Impossible to convert the scrip post file

  New printer configured prints letter but when I want to print a page with barcode on get error message: -.

  print the error message could not convert the scrip post file

  Can someone help please

  Hello

  Good news - after the first print as Image and wait for about 15 minutes as the printer thought of printing it - I had attempt additional ater restart and now it is printing the past I downloaded through Adobe Acrobat

• Errors in the documentation of the API in WebWorks

  Can we start a list of errors in the documentation? A couple I picked up so far:

  1. HTML5 File API is not supported by PlayBook. It was falsely announced that supported: https://developer.blackberry.com/html5/apis/filesystem.html
  2. FilePickerOptions filter the example values don't work property, you must precede the extensions with *, for example ["*.jpg", "*.bmp"]. https://developer.BlackBerry.com/HTML5/APIs/BlackBerry.Invoke.card.filepickeroptions.HTML#filter

  Thanks for catching these.

  Please feel free to log these errors using the Manager of public incidents and submit it to the "Documentation" project title: https://www.blackberry.com/jira/secure/Dashboard.jspa.

  We will be able to keep track of issues and resolutions, and since it is open to the public, users can check if their problems have been reported as well.

• error when creating a new partition "the operation you selected will convert the selected disk from basic to dynamic disk...". »

  Original title: getting the error while creating a new partition

  here to create a new partition get the error "the operation you selected will convert the disc selected basic to dynamic disk... etc" Please help.

  I would like to join the screenshot of the error, how?

  Hello

  1 have had any changes made on the computer before the show?

  2. how many partitions are there currently on the computer?

  3. how many hard disks on the computer do you use?

  4. when exactly you get the error message?

  I suggest you refer to the article and try to follow the steps and check if you are able to create a partition:

  Create a new Partition on a hard disk in Windows 7

  http://TechNet.Microsoft.com/en-us/magazine/gg309170.aspx

  I also suggest you the link and attach a screenshot of the screen.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

• Error: "Quicktime may need to be installed in order to display or to convert the video in Adobe Media Encoder.»

  I'm trying to export a Flash video. I get this message

  "Quicktime may need to be installed in order to display or to convert the video in Adobe Media Encoder."

  Despite the error message, it "seems" and spits a mov file, but only the audio crosses (the video is all black).

  I use Flash Professional CC, but older versions (CS6) seem to have the same problem.

  Some tips on how to export as swf no Flash?

  Thank you!

  I would still choose not to send the video through Adobe Media Encoder, which can stop the error message.

  What is your scenario? Video export cannot export integrated H.264 video. If you do animation and audio to go on top an existing H.264 format video, export, but make sure the alpha box set when exporting. Then, you can combine the old movie H.264 with the animation and the sound you made in Flash.

• I downloaded the latest version of the DNG Converter Camera Raw version 9.1.1 for windows. However, I get error install the update saying "error opening file for writing. Also on my help menu updates is not active?

  I downloaded the latest version of the DNG Converter Camera Raw version 9.1.1 for windows. However, I get error install the update saying "error opening file for writing. Also on my help menu updates is not active?

  If the installation program itself fails to open and run. Download it again maybe your current download is corrupted. Also, what OS you are using and you are an administrator with permission to install.

• Conversion fails with the error: COULD not: - ERROR - convert: converter.fault.FileCreationFault

  Hello, I try to convert a windows 2003 server of citrix server to vmware (the last of them succesfull 20).

  The job runs up to 95% one error:

  "Create von ' \\.\vstor2-mntapi10-shared-D587D58700001000000000000B000000\$Reconfig nicht possible."

  Logfile by saying:

  2013 04-07 T 14: 14:20.752 + 02:00 [error 12632 'Default'] [task, 350] [LRO] Unexpected Exception: converter.fault.FileCreationFault
  2013 04-07 T 14: 14:20.753 + 02:00 [12632 info 'Default'] [task, 379] [task-72] - ERROR - convert: converter.fault.FileCreationFault
  -> (converter.fault.FileCreationFault) {}
  -> dynamicType = < unset >
  -> faultCause = (vmodl. NULL in MethodFault),
  -> file = "\\.\vstor2-mntapi10-shared-D587D587000010000000000005000000\$Reconfig$"
  -> msg = ""
  ->}
  2013 04-07 T 14: 14:20.753 + 02:00 [12632 info 'Default'] [diagnosticManager, 267] retrieved taskInfo to "converter.task.Task:task - 72" mapping to "converter.task.Task:task - 72".»
  2013 04-07 T 14: 14:20.753 + 02:00 [12632 info 'Default'] [diagnosticManager, 307] the task with id = "task-72" proved to be a task 'recent '.
  2013 04-07 T 14: 14:20.753 + 02:00 [12632 info 'Default'] [diagnosticManager, 321] no existing group of newspaper found to task with id = "task-72. The task is still 'young' so a bundle of newspapers going now is assigned.
  2013 04-07 T 14: 14:20.753 + 02:00 [12632 info 'Default'] [diagnosticManager, 790] recovery job related diagnostic for the tasks of server with id = "task-72.
  2013 04-07 T 14: 14:20.925 + 02:00 [10056 "Default" info] passage work 0 "job-72" completed with an error. -struct Converter::Server:Job:JobExecutor:SchedulerUpdateSpec __thiscall Converter::Server:Conversion: ("d:/build/ob/bora-875114/bora/sysimage/lib/converter/server/conversion/conversionJobExecutorImpl.cpp:405")
  2013 04-07 T 14: 14:21.125 + 02:00 [10056 "Default" info] suspended 1 elements of Planner for employment (job-72) - __thiscall Sub Converter::Server:Job:JobProcessorImpl:SuspendJobAux(const_class_Converter::Server::Job::InternalJob_&,class_Converter::VdbConnection_&) ("d:/build/ob/bora-875114/bora/sysimage/lib/converter/server/job/jobProcessorImpl.cpp:828")
  I run vCenter Converter Standalone 5.01 version 875114
  I tried to erbuild the mbr, the boot sector and the boot.ini, but no success yet a screen is blue with 0x00000007b
  any new idea

  Yes, something is not in communication with the pilot vstor2:

  2013 04-07 T 14: 13:11.545 + 02:00 [info 09908 "Default"] [, 0] Vmount library: 1450 error communication error with the pilot while
  2013 04-07 T 14: 13:11.545 + 02:00 [warning 07680 'Default'] [, 0] error 999 (hive to load error: unknown error 999 (0x3e7) (999)) temporary hive loading

  1450 error is "insufficient system resources exist to complete the requested service."

  999 error is "error performing a paging operation."

  Both are unusual. Try the task set up on destination VM, if the task fails you will need to restart the source machine and try to restart the conversion.

  HTH

  Just found/3 GB switch in your boot.ini file, there are rumors that sometimes you should remove this switch for successful conversion: http://communities.vmware.com/message/1708679#1708679

• Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to assist with co

  Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to help the conversion; as I said, the first 4 pieces without problem, then the conversion failure.  I tried to convert the document integer and same result.  Specifically, I bought the feature export to Word.  Please help.  I had initially export the Word Perfect PDF document and attempting to pass PDF to MS Word.

  Hi sdr2014,

  I'm sorry to hear that your conversion process is at a standstill. It seems that the problem is not specific to a single file, you have been unable to convert anything, since the first four chapters of a correct conversion.

  So, let's try this:

  If you want to convert via the ExportPDF site, please sign out, clear the browser cache, and then reconnect. If you use the drive, please choose Help > updates to ensure that you have installed the latest version.

  Please let us know how it goes.

  Best,

  Sara

• How to print after the Error Msg: cannot convert the postscript file

  "Maverick", we installed our MacBook Pro and our printer is a HP 8600.  We have failed to get our Adobe Acrobat Professional 8 to print our PDF files.  Instead, we got the error msg: impression: cannot convert the postscript file.  We have used this application for years without any problem.  How do we solve this problem so that our request will BE "convert postscript file" or do we not have to spend several hundred dollars to upgrade?

  I think that we have solved the problem.  Instead of looking for the solution via Adobe, we went to our info from the printer online, which was the HP OfficeJet 8600.  We found the printer drivers special for our system of operating newly installed Maverick for our MacBook Pro.  After having downloaded and installed the new drivers by fashion, we tested print a pdf document, and it was printed without any problems.

• The Gains of the PID VI Installer

  Hey guys,.

  I am trying to learn to use the PID VI in LabVIEW and programmed a simple VI. Here's the problem: the output of the PID VI seems only related to the Kc in the program and the other two values (Ti and Td) do not affect the output, for example ranging from 0.001 to 1000.

  Is that all that I missed when programming?

  Thank you very much.

  Yes, of course, you can use a loop on the cRIO - you must use a loop if you want your code to be executed more than once.  Make sure you put everything that should happen several times (for example, the function and control of front that you update while the code is running in the development environment) inside the loop.  New LabVIEW users often put out of the loop and wonder then why they are only read once and never update again even if the code is still ongoing.

• "" Cannot convert the DVD content to. WMV error file Format "need media encode.

  Original title: encode media need

  I have windows 7, I am trying to copy DVDs to WMV format. I get instructions to install media encoder. My computer will play wmv already if do not know why I get this message. Thank you.

  The f

  Hi Jeffst,

  1 are directly convert DVD files?
  2. are you trying to copy the content of the DVD first and try to convert the files?

  You can use a conversion tool to convert your files to another. WMV format. The link below is a program free Converter Windows Media Encoder 9. There are other programs of type converter out there, so if the Encoder 9 is not exactly what you are looking for, you have that option.

  http://www.Microsoft.com/windows/windowsmedia/forpros/encoder/default.mspx

  Reference:

  How to index a file video .wmv with Windows Media Encoder
  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/mediaadvice/0065.mspx#EAF

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• error 'Cannot convert the type value' regarding

  Here's the scenario:

  There are partial data in the ATG user related tables.

  1. I mean like the tester deleted the record for one of the user in the dps_contact_info table.

  2 Tester invalidates the cache in the profile repository

  3. try to connect with the same username and password.

  4 get the error in the newspapers ' Can' secret value for type "and also because the exception message 'cannot change existing identifiers. This error message is seen for the first time when the user after deleting the record connections. When we logout and login back again once there mistakes.

  5. but the record gets inserted into the dps-contact_info table after connecting successfully.

  Here is my definition of the user for the custom address table

  < name point-descriptor = "defaultContactInfo" >

  < table name = "upt_user_dflt_adr" type = "primary" id-column-names = "user_id, type_cd, opco_id" >

  < property name = name of column "address" = 'adr_id' element type = 'contactInfo' category = 'general' cascade = "insert, update, delete" / >

  < property name = "user" column-name = data type 'user_id' = 'chain' category = 'general' / >

  < property name = column name data type 'type' = 'type_cd"="enumerated"category ="general"default ="HOME">

  < attribute name = "useCodeForValue" value = "true" / >

  < option value = "HOME" code = "0" / >

  < option value = "BILLING" code = "1" / >

  < option value = "DELIVERY" code = "2" / >

  < / property >

  < property name = "opco" column-name = data type 'opco_id' = 'listed' category 'general' = >

  < attribute name = "useCodeForValue" value = "true" / >

  < option value = "STSH" code = "0" / >

  < option value = "ELSA" code = "1" / >

  < option value = "GNTC" code = "2" / >

  < option value = "MRTN" code = "3" / >

  < option value = "MRTR" code = "4" / >

  < / property >

  < /table >

  < / descriptor point >

  I am not able to solve this problem. Please let me know what needs to be done to avoid this error ' can' secret value for type. Thanks for your help.

  Finally, with some out of debugging the code in the box, I found the real problem.

  Here the solution useCodeForValue is set to false and it solves the problem of conversion for me.

• Error of the IDE controller after using vCenter Converter Standalone

  I usually get the following two messages when you click on the "Edit Settings... "the virtual machine created by using the operation"convert the Machine ":

  "An IDE controller is found but the virtual machine does not support this option."

  After clicking on the 'OK' button, I get this:

  "A flat backup option is not found."

  After clicking OK, the open Virtual Machine properties and hard disk 1 is summarized as 'not supported '.

  This occurred during the conversion of a source type of powered on the machine to a virtual machine of VMware Infrastructure, but also a source of VMware Infrustructure to another virtual machine of VMware Infrustructure.

  It can be the cause and the VM may be edited to prevent this. Happen using a Windows 2003 server that is powered on the source machine and a XP Pro Sp3 virtual machine running on ESX. XP has been installed directly as a virtual machine using an ISO file. The converted XP machine powers up to a GUI. I tried other machines, but the conversion operation fails at the beginning, probably because it was "multiboot" machines.

  Thank you

  Homerun.

  A virtual machine with the version 4 hardware does not support IDE hard drives. Try to upgrade the hardware VM to version 7

• TestStand database error - error converting data from nchar int type.

  Hello

  I used SQL standards database stored procedure options to store records of my test and I added the generated tables and stored procedures in a database and it seems to work OK in this form. However when I change the UUT_Results table to include a new column that contains the value of the primary key of another table in the database that I meet problems.

  I run a query that returns the primary key value (integer) for a given series number and stores the result as a global station (number format). The correct value is stored in the variable, but when I try to use this value in the stored procedure I get an error like below:

  An error occurred calling "LogResults" in "ITSDBLog" of "ZNIUGOL TestStand database logging"
  An error has occurred by executing a statement.
  Schema: SQL Server Stored Proc (NOR)
  Statement: UUT_RESULT.
  Description: Error converting data from nchar int type.
  Number:-2147217913
  NativeError: 8114
  SQLState: 22018
  Reported by: provider Microsoft OLE DB for SQL Server

  Source: TSDBLog

  My SQL statement for creating the table and the procedure for UUT_results are below:

  ~
  CREATE TABLE UUT_RESULT)
  Uniqueidentifier PRIMARY KEY ID,
  BoardDetailID int,
  STATION_ID varchar (255),
  BATCH_SERIAL_NUMBER varchar (255),
  TEST_SOCKET_INDEX int,
  UUT_SERIAL_NUMBER varchar (255),
  USER_LOGIN_NAME varchar (255),
  START_DATE_TIME is datetime,
  EXECUTION_TIME float,
  UUT_STATUS varchar (32),
  UUT_ERROR_CODE int,
  UUT_ERROR_MESSAGE varchar (255)
  CONSTRAINT UUT_RESULT_FK FOREIGN KEY (BoardDetailID) made REFERENCE BoardDetails)

  ~
  CREATE PROCEDURE InsertUUTRESULT
  @pID uniqueidentifier,
  @pBoardDetailID int,
  @pSTATION_ID varchar (255),
  @pBATCH_SERIAL_NUMBER varchar (255),
  @pTEST_SOCKET_INDEX int,
  @pUUT_SERIAL_NUMBER varchar (255),
  @pUSER_LOGIN_NAME varchar (255),
  DateTime @pSTART_DATE_TIME.
  float of @pEXECUTION_TIME.
  @pUUT_STATUS varchar (32),
  @pUUT_ERROR_CODE int,
  @pUUT_ERROR_MESSAGE varchar (255)
  AS
  INSERT INTO UUT_RESULT (ID, BoardDetailID, STATION_ID, BATCH_SERIAL_NUMBER, TEST_SOCKET_INDEX, UUT_SERIAL_NUMBER, USER_LOGIN_NAME, START_DATE_TIME, EXECUTION_TIME, UUT_STATUS, UUT_ERROR_CODE, UUT_ERROR_MESSAGE)
  VALUES)
  @pID,
  @pBoardDetailID,
  @pSTATION_ID,.
  @pBATCH_SERIAL_NUMBER,.
  @pTEST_SOCKET_INDEX,.
  @pUUT_SERIAL_NUMBER,.
  @pUSER_LOGIN_NAME,.
  @pSTART_DATE_TIME,.
  @pEXECUTION_TIME,.
  @pUUT_STATUS,.
  @pUUT_ERROR_CODE,.
  @pUUT_ERROR_MESSAGE)

  Any help would be appreciated,

  Thank you

  Stuart

  Stuart-

  What is the expression you are evaluating and the data type of the parameter that you defined in the Options database dialog box for the schema that you connect to data with?