Documentation for the automation plugins

Similar Questions

• HP Photosmart 3110 referred to the documentation for the printer. Error 0xe18a001

  HP Photosmart 3110 referred to the documentation for the printer. Error 0xe18a001

  Hello caromuna,

  It seems that other users have found a way to completely reset the printer back to the default settings, which can help with this question.

  The reset is discussed in this forum thread and seems to be a bit difficult to fill. Let me know if it helps to solve your problem.

  Photosmart 3310 ink system failure

• Delivery of stock for the SOAP plugin

  Hello.

  I found a problem with the initialization of the inventory for the SOAP plugin.

  There is a device orchestrator with SOAP plugin installed.

  There is a SOAP host defined in the inventory of the SOAP plugin. To access this host of action script, I use the method "SOAPHostManager.getHosts ()".

  The problem appears after orchestrator service restarts when the SOAPHostManager.getHosts () method returns an empty list (no matter how much time has passed since the reboot was completed).

  After I manually navigate the SOAP plugin with orchestrator client inventory, the problem goes away and 'getHosts()' begins to work properly.

  Is it possible to automatically perform the initialization of the inventory for the SOAP plugin?

  Thank you.

  Just hollow cheked the doc of the plugin and seems that there is a bit of confusion.

  SOAPHostManager.getHosts () - returns only the host names of SOAP

  If you need an object entirely initilized SOAPHost you can do something like...

  var soapHosts = Server.findAllForType ("SOAP:Host")

  System.log (soapHosts.Length);

  for {(hostIdx to soapHosts)

  Host = soapHosts [hostIdx]

  System.log (host.preferredEndpointURL + "-" + soapHosts [hostIdx]);

  }

  Let me know if it helps

• Documentation for the conversion of virtual and physical memory

  Are there any decent documentation for the conversion of virtual and physical memory?

  Any help would be appreciated.

  Yes I do, I'll send you my notes!

  Matthew

  Kaizen!

• Documentation for the Acrobat Document object model

  Hello

  I'm trying to move my first not in this area, I hope you can bear with my naïve questions.

  I'm trying to find documentation for the Acrobat Document object model. To my surprise, a search in the archives of the forum failed.

  I remember download out of curiosity some Adobe's PDF documents on the execution of JavaScript in Acrobat, ADOM precisely about one (but I could be wrong it was a few years ago and I'm getting old): these documents of the are a thing of the past?

  Thank you very much.

  Giordano

  Have a look here:

  http://www.Adobe.com/devnet/Acrobat/JavaScript.html

  The link is for reference in version 9, which is generally pretty good.

  But if you want the last being (PDF form), you can find it inside the

  Package Acrobat X SDK, here:

  http://www.Adobe.com/devnet/Acrobat/SDK/EULA.html

• Documentation for the Plugin Actions

  I would use some of the shares that come with the UCS Plugin library, but I don't understand the functions, the input parameters or out parameters. Can you tell me where these could be documented?

  A little late but it might be useful for anyone else looking for the same...

  So it must be valid for each plugin:

  1.
  var arrayOfObjectsFromThatType = Server.findAllForType ("NameSpace:Type");
  Returns the array of all objects of this type.

  2.
  var specificObject = Server.findForType ("NameSpace:Type", id);
  Returns an object with the id and type

  3. all items of the UCS has the following properties:
  ID
  name
  DN
  multiUcsmDn

  The most important of all of these properties is multiUcsmDn. It is the unique id that has the code hierarchy. So, for this plugin id = multiUcsmDn. Examples.

  'System' will be multiUcsmDn = "http://10.23.34.34/" - not sure for the exact system, but you can understand.
  "Châssis" will be multiUcsmDn = "http://10.23.34.34/sys/chassis-1".
  "'Blade' will be multiUcsmDn =" "http://10.23.34.34/sys/chassis-1/blade34"

  In order to have all of this in mind, you can do the following

  1.

  systems of var = Server.findAllForType ("UCSM:System");
  Returns the array of all registered systems of UCS

  2.

  Not simple here, but you can filter the chassis based on a selected UCS system.

  var allChassis = Server.findAllForType ("UCSM:Chassis");

  You can filter the multiUcsmDn chassis. Something like
  If (chassis.getMultiUcsmDn () .indexOf (system.getMultiUcsmDn ())! = - 1).
  then add this frame to the list so that you can filter only the chassis that are bound to the UCS systems you have chosen.

  3.

  The next step is easy, because the chassis has the method getBlades(). The two properties that can be useful here 'status' and 'assignedToDn '. It will identify if the condition of the blade was provissioned and so on.

  4.

  In this case, looking for blades that are not the provission in previous steps, there is a workflow of service profile to assing blade - "assign a service profile to a blade.

  Hope it is useful.

  Thank you

  Igor.

• Function documentation for the SignalExpress project

  I use the function 'project documentation' LabView SignalExpress 2009 in my application project.

  The draft measure a pressure signal permanently in different situations. I want to present my project document is a list of locations of the siganl of pressure taken under different situation, with a plot for each situation so that readers can easily compare the plots.

  For example, I want the document states:

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  At 10:00 at low flow:

  ground pressure siganl

  At 11:00 with increased flow

  the same pressure signal ground

  etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  What I did was flirting with the pressure signal in my documentation of the data acquisition phase in the project tree, but in doing so, I could only show the last parcel of this signal in my documentation, the plot is in real time, just like what shows in the display of the data.

  Is there a way to show the same siganl taken at different times in a documentation?

  Thank you!

  Hello

  You can totally do this by using a feature called "instant."

  Rather than drag the step signal directly in your project document, first create a snapshot of your data using the menu option "use > create snapshot...". (Ctrl + Shift + T) »

  A dialogue will appear asking you what signals you want to instant. After selecting / them and clicked on Ok, your new snapshots will appear in the section overview of the application (in the left corner below, by default).

  Drag these signals on your project document. When you are ready to create your next snapshots after changing the configuration, you can select "Operate > repeat the last Snapshot (Ctrl + T) ' to simplify your process.

  For more information about the snapshot, see using LabVIEW SignalExpress found under "Help > LabVIEW SignalExpress Help" and search on the keyword "snapshots."

  

  I hope this helps!

  Phil

• create documentation for the user

  I have a simple...

  I have a panel tabs. A tab is called DOCUMENTATION. I would like to have a button that the user can push that provides a context menu or the flight hover-text (maybe two) that contains some relevant troubleshooting information for the use of the physical instrument. Is attached to my style of fishing-line/duct-tape/man caves to do, there must be a more elegant way.

  My VI runs in a loop, so I need something that can handle in a loop.

  Thank you!

  See attached example.

  You can also add the tip Strip directly by clicking with the right button on control > properties > Documentation > advanced band.

  Run vi, click on the button if pop poster has it before use... Just added the event structure. Place your mouse on the same button it will show same help text in the edge Strip.

  Is that what you want?

• global variables for the XML plugin problem

  Hello world

  recently I started working on a dialog box SOUTH, where the user can load the *.xml files in DIAdem.So much my code for the button looks like this:

  ....

  Call the FileNameGet ('ALL', 'FileRead","*.xml")
  Call DataFileLoad (FileDlgName, "XML_Plugin", "Load")

  ....

  And I must say that it works very well! I am able to load all listed in the devices file. BUT when I tried a number of loading devices, I used a global variable, that I defined in the vbscript file that I load the SOUTH since, I've noticed that global variables, I've defined with GlobalDim are not defined in the vbs.:mansurprised of XML_Pluging:

  Then I started to experiment and so far without success, no matter where I define global variables, in my plugin *.xml all not defined! The native commands even and DIAdem functrions does not work. If I run the script in tiara, it shows no errors, but when I use the plugin to open a file, then it gives an error. For example, MsgBox is not allowed.

  I used the plugin example for *.xml, which was published on the Web site of NOR, and I made a few changes. But overall I have it has not corrupted and I kept the same structure:

  Void ReadStore (File)

  Dim XmlFile: xmlFile = File.Info.FullPath
  '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
  'open the file '.
  OpenXMLFile xmlFile

  End Sub

  Void OpenXMLFile (xmlFile)
  '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
  ' Open MS - Xml Parser
  'Create the ActiveX object for the Microsoft XML parser.
  Dim XDoc: set xDoc = CreateObject ("MSXML2. DOMDocument.3.0")

  "Try to load the XML document
  If xDoc.Load (xmlFile) = False Then
  "Failed to load the document XML.
  RaiseError ' unable to load XML document!
  End If

  protected originalLocale: originalLocale = Getlocalte
  "SetLocale" en - us ".

  "The XML document loaded successfully!
  '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

  '----------------------------------------------
  "Read the header information.
  '----------------------------------------------

  Here, I have read some values of the header and then I loop on all devices present in the file!

  So basically I have two subroutines and that's all.

  SetLocale originalLocale

  End Sub

  So what I am doing wrong? Why global variables and other functions do not work. Is it because there is xml code in the script this way or it's a version problem?

  I use DIAdem 10.2. If I use global variables in other vbscripts, I use to draw curves for example I have no problem. Now I'm no *.xml code and no subroutines.

  I'd appreciate any solution that will make my *.xml plugin to work.

  Hi fscommand.

  It is expected all behavior.  Use XML, as all VBScript DataPlugins, runs in a separate VBScript host of the DIAdem VBScript host.  DIAdem VBScript host adds all global variables green and Red controls global to host Microsoft VBScript standard.  Use VBScript host has its own special abilities (file object, root object), but there is NO access to Globals green or red blanket orders in the reception of DIAdem VBScript.  Your SUDialog runs in a third host VBScript, which is separated from the other two and the other two are not capabilities (command SUDialog callback functions), but the SUDialog VBScript host and VBScript tiara share all global variables green and Red orders overall.

  Normally all blue VBScript commands are allowed in all 3 VBScripts hosts, but in the case of the DataPlugins MsgBox and InputBox functions were especially restrained because the dialogues could cause a lot of trouble with the DataFinder.  In fact, they have been allowed to 9.1 tiara which was the latest version of tiara for the DataFinder appear.

  So, why do you want to pass information between the XML use and tiara?  If you want to use to share information with DIAdem, then you should just expose every piece of information as a new property in the data portal, which can read and use the code VBScript DIAdem.  The path of the XML file is already available inside the use of XML.  What other information in the call VBScript DIAdem do you need to share with the use?

  Brad Turpin

  Tiara Product Support Engineer
  National Instruments

• Print the documentation for the structure of the event?

  Hi all

  Work with the documentation "printing" in 2012 has Labview and noticed that there is not an obvious way to create documentation for each separate event in a structure of the event.  Since it is possible to show each individual event is a separate diagram in html file, it seems that it would be useful to be able to create a description of an event.  Please let me know if there is a way to do this.  Thank you.

  GSinMN

  Try to use labels of the integrated structure.  You will have a single comment for each case of the event.  Start your comments with a hash-tag "#" and the bookmark manager to become your best friend for the printing of your help file.  (Of course, you have to 2013 for Bookmarks work)

• 7280 all-in-one message says print cartridge alignment failed. see the documentation for the product?

  My 7280 all-in-one printer message indicates the alignment of the failed print cartridge.  See the product documentation.  I tried to do a literature search and landed on this link.  Where can I find documentation for my printer?

  This is the document that you are looking for.  You can find all documents and even more for your printer here.  Let me know what happens.

• Where can I find documentation for the SDK of first?

  I already asked several questions in the forums, but I'm still lost. For each feature, I would like to implement, I come here to ask if it is still possible.

  So, what I would like to be my last question: is there an autour documentation?

  CEP 6 Extension HTML Cookbook for 2015 CC · Adobe-CEP/CEP-resources Wiki · GitHub

  This will give you a lot of important information.

  But there is no official documentation for ExtendScript APIs. I recommend so the PProPanel example:

  Samples/PProPanel to master · Adobe-CEP/Samples · GitHub

  I do not recommend questions here. Especially if you search in the ExtendScript APIs. Adobe´s Bruce Bullis used to be very responsive and dedicated. In addition, I started following these forums to help others since I know how complicated Premiere´s SDK can be at the beginning.

  Thomas

• Reconnect a disconnected host vCenter for the VC plugin

  Meet us enough frequently a problem with a vCenter is no longer communicate with the plugin from VC.  I want to be able to do is to force the plugin to try a reconnection to the vCenter when it is in such a State.  Sometimes the VC plugin will appear under the name "unusable" in inventory and at other times, it looks good, but if you try to cross the inventory, you'll find yourself with this defect.  The only way that I was able to get the happy connection is again to restart the vCO Server service.  What I would like to be able to do is to check for a null or undefined or null return value when I expect to be valid, as appropriate to tell her to reconnect, if it still does not then kill the process.  I can easily do the test, but I don't know how to force a refresh of the connection.  VcPlugin.refreshObjects () would result in a reconnect happening?

  Have you looked into the technical preview plugin in the docs tab? A ball in its description element looks like it automatically solves what you describe. Preview version of VMware vCenter Orchestrator plug-in for VMware vSphere 5.5.1 technical

• documentation for the tools of 8.53

  Hello
  Search the documentation for installing the tools 8.53 (MS SQL server).
  
  Thank you.

  Everything you dream free installation:
  http://docs.Oracle.com/CD/E38921_01/PSFT/HTML/docset.html

  Nicolas.

• Documentation for the installation of Hyperion Essbase

  Hi all
  
  Please send me the documentation for installation of Hyperion Essbase 11.1.2.1.0 on 64-bit linux.
  
  
  Thanks and greetings
  SAI

  Here is the blog: http://balajiabhi.blogspot.com/2012/01/oracle-hyperion-epm-111210-linux-32_20.html

  read: http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_start_here_11121.pdf

  Make sure that you have additional components usually people forget... Thank you