Documents, data and other

Similar Questions

• Documents, data and 'others '.

  On a totally restored 32GB iPad 9.7 Pro I note there are GB 26,11 likely the ~ 6 GB is taken up with the free operating system, however it y 41.8 MB of data & Docs and 403,5 Mo 'Other' also be caught up.  What are these Docs, Data & 'other '?

  Thank you

  Most of the time that it is cached of images and automatically backs up Apple has questioned if you want to erase this I let some instructions below:

  The steps are:

  (1) download the Battery Doctor app on your iPad (it's the first one that appears in the search)

  2) press the "Junk" icon on the bottom and press "clear the Cache".

  (3) repeat until your space becomes available. People that I learned this technique of some other bulletin board said it took 10-15 tries, but it could take 30 +. More you do the more it'll clear up this space.

• Removal of Documents and data and other

  Material: iPhone 5

  Software: iOS 9.2 (at day, on this day)

  I have an old iPhone 5 that I'm redirecting as music player. I did a thorough cleaning ("erase all content and settings') of the device before you start. I copied the music on it (via iTunes on my MacBook). After a few moments, I noticed that the use of "Documents & data" is now about 900MB, and 'Other' is about 350 MB. What is this, and how do I empty?

  There are no installed applications (other than those which are by default on the phone). He has been in flight since the reset mode (but with WiFi and Bluetooth on), and it is an inactive SIM (got a new with my new phone, so this SIM has been disabled by my company). The only active account on my Apple account. No email, social media, etc. accounts are configured. There is no photos, videos, podcasts, or anything else on it. The use of the storage (under 'manage storage') shows some nominal storage by default applications (from 16 KB to 2 MB) and there is nothing further stated within each application.

  Then... What is only 1.25 GB of things which are appeared unexpectedly? And more importantly, how can I get rid of him? Other than music files (and the music app), there is no other applications or data on the iPhone that needs to be saved.

  Thank you.

  'Other' data the iOS itself, as well as any app data, messages or email.  350 MB is low, so it's mainly the iOS.  The Documents and the data is most likely the work of art album data, and associated playlists etc.

• Update and now the documents, pictures and other files are removed__

  Hello

  I clicked on install windows update on my computer (vista) and after he finished to install my documents, pictures and various other files have disappeared.  The hard drive shows again the amount of data I had, but all the files are not in the same place.

  What can I do to get back them!

  Help, please.

  Thank you

  Control Panel > backup and Restore Center > repair with system restore

  That's what I had to do to fix my computer. I lost Aero and my computer just went completely wrong. I had to do a system restore to get it back.

• Strange behavior of data and other improvements

  Hi all

  I did a .vi that records three analog voltages (a microphone, one on the whole of the sound source and the other through a resistance of 1 Ohm for the application of measures of power) and three problems. It is my first time here, so bear with me please.

  1. the plot tension of the microphone (supplied to the device, NI USB-6259, through Ghost and XLR adapter BNC power) shows a kind of "load" that I don't think that should be there. In addition, the other two parcels of power vs. sample do not show such a trend. For reference, I'm out of tension, and the aircraft makes so sound, before I even start recording. The plot of voltage microphone should be constant over a range of sample semi as the input signal is just a tone 1 kHz.

  2. the registration of the data in a .lvm file takes about three times as long as registration. This is not as critical, but it would be nice to reduce the time if possible.

  3. I need to make sure all samples of the three input strings are synchronized with the time, because they will be used to create a transfer function. I read that this device uses multiplexing; is it possible to make the time between reading a sample on a channel, then the next less (or 0)? In addition, how to set the scan list?

  I have attached the .vi, an image of the block diagram and an image of the power of three parcels and zooms in on the plots of the device voltage and resistance to show consistency. Any help is very appreciated!

  Thank you!

  I'm about to go home for the evening, but take a look at this very hasty extract VI (save on the desktop and then drag on a block diagram) of inspiration:

  

  In the upper loop, you acquire some of the samples in each loop and the Queuing data to the background loop where you write to the file. Is obviously absent, how to stop the down loop once you have finished writing all data - a look at the examples should give you some help here.

• Script for measures relating to the document change and other details of size in all open documents

  Hi all

  Once again, in my work, I have to change in several files to the size and type of specific measures:

  -in the preferences "units and increments:

  thumbs to milimiters

  and the increment of cursor keys

  -J' I also need to change the document format

  width and height

  and size of bleed.

  Would be a great help if I would be able to change this once to a set of open files... in my work I need to do this all the time... and of course, I miss the "apply to all open documents.

  Thank you

  Rui

  Hello Rui,

  Try something like this:

  app.documents.length && app.documents.everyItem().properties = {
      viewPreferences:{
          horizontalMeasurementUnits: +MeasurementUnits.MILLIMETERS,
          verticalMeasurementUnits: +MeasurementUnits.MILLIMETERS,
          cursorKeyIncrement: '1mm',
          },
      documentPreferences:
          {
          pageWidth: '200mm',
          pageHeight: '250mm',
          documentSlugUniformSize: true,
          slugTopOffset: '10mm',
          },
      };
  

  @+

  Marc

• drives great for groups of data and other files

  Hello

  I was asked to provide a large amount of storage through our cluster VM.  I was invited for between 100 and 200 terabytes and I was wondering if there is a way that vSphere can cope with this?  What I've read, you can not (LUN 32 x 2 TB) data from more than 64 to store, and you can't do a vmdisk more than 2 TB.

  Is there a way to bypass these limits?  Raw disk mapping allows large LUN?  Nobody knows when the limit of 2 TB Lun and vmdisks will change?

  Thank you!

  If your storage is iSCSI, you can use an initiator of software inside the virtual machine and use GPT disks more than 2 TB.

  If your storage is CF, you should use a dedicated HBA and VMDirectPath or try using NPIV (but I'm not sure that NPIV can use larger disks).

  André

• How to get only latest date and other columns in the table

  Hello
  

  Table
   
     id          name        date
    123        a             2/3/2010
    124        b            15/2/2010
    125        c             1/1/2010
    123        a             12/4/2010
    125        c             17/2/2010
  
   

  It's a table, id, name, date here is the composite key.
  I want to select id, name, and date so that date (e.g., 123 date 04/12/2010 be selected for the id) is selected for each id and each id and name should be selected once.
  So, what will be its application?
  Thank you

  select
     id,
     name,
     date
  from
  (
     select
        id,
        name,
        date,
        max(date) over (partition by id, name) as max_date
     from your_table
  )
  where date = max_date;
  

  Would do assuming you do not have duplicates (all 3 columns) in the table.

• Type of default Document and other preferences for new documents

  I'm curious to know what default document type and other preferences of new people from documents establishing their Dreamweaver preferences for?  I'm about to a discovery of the site to rework all the choices for Default Type of Document (DTD) a bit overwhelming.  For a site that is "general access" - not an Intranet where you control the browser - what is recommended for the DTDS and other new doc preference options?

  Thank you!

  In General, use the document type that corresponds to your coding skills & documenting requirements.

  Example:

  If you are still using obsolete tags and the provisions of base tables, then a HTML 4.0 (transitional) is recommended.

  If you use no deprecated tags, then (strict) 4.1 HTML or XHTML is recommended.

  NOTE: The HTML5 tags are not supported in the last generation or pre - IE9 browsers.

  FWIW, I always use XHTML document for the majority of my work types.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• Why my 6s Iphone says that I used 44,59 GB of data and documents when I don't have? Recently updated to iOS 9.2.1 and having problems.

  I bought the new 6 s iPhone with 64 GB of storage in December. A few days ago I updated to iOS 9.2.1 and I got a notification the next day saying that my storage was almost full. I was shocked because I have not yet used half of the 64 GB and before I upgraded to the latest updated everything worked well. Also, on a side note, game Center does not work and when I try to open the app it's just a blank screen and when I go into settings, click on the play icon, it does not even open.

  Back to the problem of storage, I don't not even use a lot of my storage upward. Look at the photo for reference. This photo was taken after I updated.

  So I am very confused right now with my phone and I have only had it a month ago and it's already the case. It does not make sense to me to have only 4.84 GB free. I used 6,76 Go on applications, and I have 20 apps and I understand that, but whence this other 44 gb?

  Why do we say I used 44,59 GB of data and documents when I don't? Could be a problem due to the update to iOS 9.2.1?

  BradCalifornia15 wrote:

  So I am very confused right now with my phone and I have only had it a month ago and it's already the case. It does not make sense to me to have only 4.84 GB free. I used 6,76 Go on applications, and I have 20 apps and I understand that, but whence this other 44 gb?

  Why do we say I used 44,59 GB of data and documents when I don't? Could be a problem due to the update to iOS 9.2.1?

  Connect your phone to iTunes on your computer and see what the ability the bottom bar shows for storage. You can have one large amount of 'other' data which may indicate a corrupted sync or corrupted update. If you have backed up with iTunes before you update, try to restore the backup.

  Take a look at the Board to the alarm user.

  What is 'Other' and what I can do about it?

• Confused as to why I fill out and sign some documents of player and other times I can only sign the documents.  Why is this?

  Confused as to why I fill out and sign some documents of player and other times I can only sign the documents.  Why is this?

  Hi sapconman2812,

  It depends on the documents. If the document is configured to enter data, then you will need to use fill & sign tool to complete the form and sign it.

  If its only out in the signature, then you will get only the option to sign the form.

  Kind regards
  Nicos

• Prob w/Importing Favorites and other data from Internet Explorer

  Everything by following the steps described in the forum article titled "Importing Favorites and other data from Internet Explorer" after completing step 3, select which points to import, if I select all the option or just the Favorites, I get the same error "Firefox has stopped working... close the program."

  I am importing of IE 8 on laptop Win7 OS. I tried importing every time and cannot get past this error. I made an export of IE8 that takes the form of a html file that there is apparently no option in Firefox to use.

  in Firefox:
  Bookmarks > organize bookmarks-> import and backup - import HTML... = HTML file

• Re: Satellite L300 - 11G - Configuration and other data is not displayed

  Hello. I have XP on my computer and I have problem with wireless card.
  All drivers are kept for the card but in the configuration utility of the wireless MAC address client and other data are not displayed.

  Can someone help me?

  Hello!

  To be honest I don t understand what you want.
  Maybe you should explain this better.

  The configuration as the IP address and MAC address, you can see in the command line. Start-run-cmd-ipconfig/all online online online

  Good bye

• How to store pictures and other data on my hisense7 SD pro tablets

  How to store pictures and other data on my hisense7 SD pro tablets

  Hi Mark,

  Please contact hisense support from here: http://hisense-usa.com/support/.  If this isn't the case, in the United States, go to the bottom of the page to choose a more suitable location.

  I could point out that http://hisense-usa.com/support/manuals.asp contains a manual that could well answer that questions without the need more help.

  Good luck and best wishes

  Kosh

• I have a HP Vista. My default Word in WordPad documents. How to make spelling and other bars and how to convert to the basic Word.

  I have a HP Vista. My default Word automatically with WordPad documents. It's terrible! How to spell check and other bars and how to convert to Word base. Thank you.

  Microsoft Word is installed?

  If so - what version (start it manually.)