DocuPrint 205 b - shows as a device, but not as a printer

Similar Questions

• The internet connection on my laptop and other portable device, but not in my office.

  Data sheet:

  -Windows 7 Ultimate 64 bit

  -All browsers and devices are up-to-date.

  Questions:

  I have this problem since yesterday and I tried to solve this problem since.

  The problem is that on my connection (WiFi) network, it says I have access to the internet, and of course it does because I can use internet without problem on my laptop, iphone and other portable device, but not in my office. It says I have an internet connection and when I ping a browser it answers correctly and it gives me all the Member States and other information.

  When I troubleshoot it it gives me something like "your computer seems to be configured correctly, but the device or resource (www.microsoft.com) is not responding." I thought it was a DNS problem so I reset everything, but no luck. Here are things I tried to solve this problem.
  -Reset TCP/ip using cmd.
  -Check if the IP is obtained automatically.
  -Check if I'm using the proxy server.
  -Rebooted (reinstalled windows)
  and many other things that I have searched on google
  But these proposals did not fix the problem.
  Here is my IP config
  
  
  C:\Windows\System32>ipconfig/all

  Windows IP configuration

  Name of the host...: Genie2Stonk-PC

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Virtual WiFi Miniport adapt

  Physical address.... : 68-A3-C4-17-D1-F7

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :

  ... Description: 802.11n wireless network adapter

  Physical address.... : 68-A3-C4-17-D1-F6

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::1d3f:8912:70e:57e5% 13 (Preferred)

  IPv4 address: 192.168.1.3 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: December-01-12 01:45:01

  End of the lease...: December - 02 - 12 01:45:06

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DHCPv6 IOOKING...: 208184260

  DHCPv6 DUID customer...: 00-01-00-01-18-4A-2D-A4-64-31-50-35-E9-3F

  DNS servers...: 192.168.1.1.

  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {40B4470F-DE12-452A-ADBA-A425B5329C34}:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft ISATAP adapter

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  IPv6 address: 2001:0:4137:9e76:1419:b1f:3f57:fefc (preferred

  EXEs)

  Address IPv6 local link...: fe80::1419:b1f:3f57:fefc % 12 (Preferred)

  ... Default gateway. : ::

  NetBIOS over TCP/IP...: disabled

  C:\Windows\System32 >
  I can't understand what I've tried so many things and nothing never gave me a connection back Please HELP.
  If I need to provide more information please let me know.
  Thank you.

  Hi zinx2op,

  Thanks for posting your query in Microsoft Communities. The description of the problem, I understand that you are not able to connect to the WiFi of the desktop computer. Provide the following information for the better understanding of the issue:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You use a third-party security software?

  ·         If it works well before?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Windows wireless and wired network connection problems

  How can I troubleshoot network card?

  For reference:

  How to reset the Protocol Internet (TCP/IP)

  Let us know if you need more assistance.

  Thank you.

• ATRIX HD: delete the mail on the device, but not server

  How can I delete messages on the device, but not on the server?

  @ Cloud

  If you try installation 'auto', then you will not get this option. Try the manual installation option, and you can select the option to keep the email on the server. Please note that this option is available for the POP3 e-mail account. With IMAP and Exchange sync is always maintained. POP is "only a download" Protocol. Try that and let us know how that works. Thank you.

• Bluetooth connectivity - although get all paired devices, but not able to send and receive any file.

  I always found the problem when connecting Bluetooth devices. Although that devices paired but not able to send and receive any file.

  Please guide.

  Hello

  Don't forget to check with your system/motherboard manufacturer Support as long as that
  the real peripheral manufacturer. Updated the BIOS and drivers from the chipset (both can affect the)
  BT) and BT drivers to their online resources.

  Read these:

  Why isn't Windows find my Bluetooth or other wireless devices
  http://Windows.Microsoft.com/en-AU/Windows-8/why-isn ' t-windows-conclusion-device
  Device advice
  http://www.Bluetooth.com/pages/device-advice.aspx

  Microsoft - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  What happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  BluetoothView is a small utility that runs in the background and monitor the activity of
  Bluetooth devices around you. For each detected Bluetooth device, it displays the following
  information: device name, address, Major Device Type Bluetooth Type device minor, first
  Detection time, last detection time and more. BluetoothView can also inform you when a
  new Bluetooth device is detected, by displaying a balloon in your bar tasks or playing a
  a quiet sound signal. -FREE
  http://www.NirSoft.NET/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all current detected bluetooth devices
  to the standard output. For each Bluetooth device, the following information is displayed:
  Address MAC, Minor Device Type, Device Type Major and possibly society
  name of the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  BluetoothLogView is a small utility that monitors the activity of Bluetooth devices
  you and displays a log of the devices in the main window. Whenever a new
  Peripheral Bluetooth comes in your area and when the appliance leaves your area, a new line of log
  is added the following information: device name, device address, time of the event, event
  Type ("Device arrival" or "Equipment Left"), Type of aircraft and the company that created the device.
  BluetoothLogView also allows you to specify a description for each device (according to her)
  MAC address) that appears in the column "Description". -FREE
  http://www.NirSoft.NET/utils/bluetooth_log_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• [ADF, JDev12.1.3] 'Enter LOV': how to show the magnifying glass (but not the inputText)?

  Hallo,

  I have associated with an LOV entry field (FieldA) and I configured the LOV to return the value for the field LOV itself plus other 2 values to fill other 2 fields (FieldB and FieldC).

  So I have:

  FieldA |... | (Magnifier)

  FieldB |... |

  FieldC |... |

  I would like to see the magnifying of the LOV FieldA field but not his inputText.

  Is it possible to do this? If so, how?

  Could I choose the magnifying glass should appear next to what area?

  Thank you

  Federico

  You can add: contentStyle = "" display: none; "to your component LOV;"

  Dario

• My border shows in Design view, but not on the internet - no idea why, please?

  www.bristolequestrianservices.co.UK/sales.html

  It's my css. I don't know why I see the border in Design view but not live.  Does anyone know please.

  #leftContent	{
  	Width: 350px;
  	border: thick;
  	border-style: solid;
  	color: #FF3399;
  	border: #0F6;
  	float: left;
  	Padding: 45px;
  	margin-bottom: 10px;

  }

  You accidentally use the shorthand for the border, rather than border-width and border-color, add the following "BOLD"...

  {#leftContent}

  Width: 350px;

  border-width: thick;

  border-style: solid;

  color: #FF3399;

  border-color: #0F6;

  float: left;

  Padding: 45px;

  margin-bottom: 10px;

  }

• I want to add a Facebook widget, it shows in the coding, but not on the page in live view?

  I'm learning dreamweaver user. I wanted to add a Facebook like button and followed a tutorial about widgets. However, when I insert the widget it is in split mode coding, but not my actual page. I tried to download and it still doesn't work? Any help will be greatly appreciated!

  The script does not. Try this:

  document. Write ("'');

  However, you use better clean code from Facebook. It's very simple: http://developers.facebook.com/docs/reference/plugins/like/

  --

  Kenneth Kawamoto

  http://www.materiaprima.co.UK/

• HP Officejet Pro 8625: I am able to print from windows, but not able to print from Word

  I installed an HP Officejet Pro 8625 wireless to my network.  I am able to scan from my computer and print from Chrome, but am not able to print from Mozzila or Word.  I replaced a HP Officejet 6500 with this device.  I can print from my mobile devices.   Any help would be welcome.

  Hello

  I found the answer to that by trawling for ever, it IS a HP PROBLEM, ARE YOU listening TO HP?

  the fact is that the printer driver will agree that a system administrator to print from some programs, Adobe, Office, Wordpad there more, but if you apply this fix, they will print

  go to the HEART control PANEL > USER ACCOUNTS > CHANGE USER ACCOUNT SETTINGS.

  Drag the slider to the bottom never notify, and then restart your computer.

  works on windows 7

  Indeed, you raise your account to an admin sys, but if HP has got their act together, they would sort this issue, because it is everywhere in their forums.

• L7780 HP 'add a device' can not detect the printer on the network

  I have a HP OfficeJet Pro L7780 printer and a laptop running Windows 7 Hp. The HP Solution Center has stopped working recently and now gives a message error "HP Solution Center cannot work because your installation of the device is not complete."

  I've uninstalled and reinstalled the software "OJProL7X00_Full_14.exe" and when I go to 'Add a device' it cannot find my printer on the network, even when I enter the IP address.

  I ran "OJ6500vE709_Scrubber_14.exe" - bird 1-2-3-4 and it did make a difference.

  The printer is connected to the network and I can add it as a printer in the window "Devices and printers" window so I can print to it, but without the HP Solution Center software, I can't scan.

  So Windows can detect the printer on the network and when I add the printer in this way, all 4 computers connected to our network can print to it fine.

  HP Print & Scan Doctor detec the printer on the network can. When I run that it is said that the comprehensive software solution for your product is not installed on this computer and when I click on the button 'Install Software', need me just the OJProL7X00_Full_14.exe file. The software seems to install fine but I can't add a device.

  HP printer install wizard for Windows can detec the printer on the network. When I run that it is said that the current full HP software is already installed and drivers seem to be installed correctly. A test page will print perfectly.

  But "Add device HP A" not somehow the printer detec.

  Please notify.

  Hello Impact,

  I see that you spent a lot of time trying to solve the problem of the HP Solution Center not allowing you to scan. Uninstall and install it, rub the software and execution of printing and scanning Dr. / Printer Wizard are all the steps I would have suggested do you.

  I would like you to follow the steps described in this document from HP: the progress bar on the Software Installation stops or stalls, many steps in it you all ready done but please follow the document from top to bottom.

  Before you start to trouble shoot the issue still provides also the computer is not connected to a VPN (Virtual Private Network) and you can access the printers on-Board Web server by entering the printers IP address in Internet Explorer.

  Let me know how this document from HP has helped.

  Thank you

• Images not showing on android devices, but they work on PC

  Hello, I am using Adobe flash cs5.5 and AS3.0.

  This is my code:

  var image:Array= new Array();
  
  image[0]="image1.jpg";
  image[1]="image2.jpg";
  image[2]="image3.jpg";
  image[3]="image4.jpg";
  image[4]="image5.jpg";
  
  
  
  var loaders : Array;
      loaders = new Array();
  
  function load_images(load_image:Array,number_of_images:Number):void 
  
  {
      for (var i:Number=0;i<number_of_images;i++)
      {
            loaders[i] = new Loader();
         
          loaders[i].load(new URLRequest(load_image[i]));
             stage.addChild(loaders[i]);
          }
  
  }
  
  
  load_images(image,5);
  loaders[0].x=0;
  loaders[1].x=100;
  loaders[2].x=200;
  loaders[3].x=300;
  loaders[4].x=400;
  

  This code works fine on PC, but when I publish on my Android phone, it does not show picture. Looks like that it did not export to my phone. How can I fix?

  I found this code:

  [Embed(source="image.jpg")]
  var logoLoaderClass:Class;
  
  logoImage = new logoLoaderClass() as Bitmap;
  
        stage.addChild(logoImage);
  

  It does not and it exports image to the phone, but I need a faster way to do it. I want to have logoImage [0], logoImage [1]... In the tables. You have an idea?

  In the iOS settings, general tab, there is an area near the bottom where you add files. You need to add JPEG files it. It is substantially the same as what makes the embed line.

• iTunes recognizes an iOS device, but not others

  I have an Air iPad on iOS 9.2.1 & one iPhone on iOS even 5s. When I start my Mac with iTunes SL sees the iPad, the iPhone gets the message to update iTunes but this is the last version for SL.  Ideas anyone please?

  iOS9 on a mobile device requires iTunes 12.3 or higher, which in turn requires a computer running OSX 10.8.5 or higher.  Some people who have improved a device over the air got around this requirement.  I'm guessing that you did a one-way device and the other differently. There no option but at the operating system level if you want to synchronize.  It may or may not be possible to upgrade your computer to the system requirements:

  You can either buy a download for Apple OSX 10.8 Mountain Lion code online, or you can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM.  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Mountain Lion 10.8 purchase link United States of America - http://www.apple.com/shop/product/D6377Z/A/os-x-mountain-lion

  Mountain Lion 10.8 purchase link U.K. - http://www.apple.com/uk/shop/product/D6377ZM/A/os-x-mountain-lion

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• Can see computer as media device, but not like a computer...

  Three computers, all the running Windows 8.1. An office is connected by Ethernet to the router, another desktop and laptop are connected by WiFi. Network detection enabled in all three, and all have internet access.

  WiFi computers can see each other. Can't see the Ethernet Office at all. The Office of Ethernet, strangely enough, sees the other two, but only as a multimedia device, not as a computer.

  No idea why?

  Can you try running the integrated "Homegroup troubleshooter diagnosis."  This will help even if you do not use the homegroup feature, because this diagnosis (which is really just a front-end for a couple of powershell commands script) is re - initialize all the network discovery and send new messages broadcast to the network to announce that a particular PC is available and online (if the computer browser service running on other machines it will detect and fill).

  Don't do it all at once, but run the troubleshooter on all computers, one after the other.  It is rarely necessary, but good for restart after they have all done.  Also when you run it, choose the "Advanced" and choose to run it as an administrator (because it should reset and configure system services, it is not complete unless you choose that on the 1st page of the troubleshooting tool).

• [Browser preview] Images showing in design mode, but not in the browser preview

  IM following a tutorial step by step beginners. I have already been able to preview the inserted images in the browser (as an exercise for the first episodes), but when I arrived at this ep.11 https://www.youtube.com/watch?v=xx6b_ItTATs & list = PLwglS51ddbZEPeURdjLDqFZ4saPGd5EiL & index = 11

  https://www.YouTube.com/watch?v=xx6b_ItTATs & List = PLwglS51ddbZEPeURdjLDqFZ4saPGd5EiL & index = 11

  I can't figured why the image is not displayed and my prewview shows that this placeholder image

  

  The strange thing is that, when Im using the navigation function in the code editor (for not manually insert the source of the image) the code resulting has a space after the first quote. You can see here

  

  If I remove this space the image does not appear in either Design view

  There is clearly a space or a special character in the name of your folder * images.

  Try to rename Control Panel files of DW (F8).  R. and try to insert the image again.

  Nancy O.
  

• Folio showing in viewer content, but not when published in Custom Content Viewer... Please help...!

  I shared a portfolio for review in the content viewer and everything seems ok, but when published (public / free) custom Viewer (v24) does not show it. What could be the problem?

  Thank you and excuse my English...

  Check your PM, I'll try and help you directly.

• Amazon "keep me signed in button" disappeared. It shows up in IE but not Firefox. How can I get it back?

  I tried logging on Amazon, then I bring up the login screen. Does not display the button ' keep me signed. " But to do this in Internet Explorer. He uses to show in Firefox, but is no more. I prefer to use Firefox, but it's getting very annoying to constantly have to retype my passwd to do anything. thanx

  Clear the cache and delete cookies from Web sites that cause problems via the '3-bar' menu button of Firefox (Options/preferences).

  "Clear the cache":

  • Firefox/Options/preferences of-> advanced-> network-> cached Web content: 'clear now '.

  'Delete cookies' websites that are causing problems.

  • Firefox/Options / preferences-> privacy-> "Use the custom settings for history"-> Cookies: "show the Cookies".