Does not begin with satellite L350D-11 needs - new mobo

Does not start my Satellite L350D-11 has (Modell Nr.: PSLE8E-00R006GR). Looks like a malfunction to the motherboard.
What type of motherboard is installed in this notebook?
Lars

Hello

The motherboard is a part of Toshiba.
I have goggled one motherboard + Satellite L350D and found the part number: V000148140
It supports a Socket 478 and it is the ATX form factor.

However, the new motherboard is not good cheap; between $ 250 and $ 300

Tags: Toshiba

Similar Questions

  • Does not begin with satellite L350D-200 - white screen

    Like similar cases:

    Turn on, hear the HD not spinning, nothing else, screen remains empty, no BIOS

    Checked and an external monitor
    Removed the battery ca > 1 hour, does not help.
    No SW/HW update, I'm aware off (other than the automatic updates)

    It looks like a failure of HW-> ASP?

    PZ

    Hello!

    > Looks like a failure of HW-> ASP?
    Yes, it seems that Yes! :(

    I m not a technician for laptop, but you've done everything you can do: remove the battery for an hour and checked with an external monitor.
    To me, it looks like a hardware malfunction

    The Satellite L350 is a new laptop and I guess that your laptop is still under warranty. The repair should be free.
    I think that it of the best way because the laptop technician can check each physical part of the laptop to determine the cause of this problem.

    Good bye

  • Does not begin with satellite A350 - accident or failure of the motherboard BIOS?

    Hello, first of all, sorry for my English :).

    I have the Toshiba Satellite A350-13 model has and very big trouble with it: when I turn it on by the power button, power light begins to shine, I can hear the voice of the fan for a second - then it stops and I noticed that HARD drive starts to work - I can hear and see by flashing the lamp next to the lamp stack CD player also works, but nothing else happens. There is nothing on the monitor. It seems that the bios is not starting. Let me explain what I do when it all started. My computer worked correctly, but there was a small mess on my HARD drive, then I got the CD recovery system, I realized after buying computer. Everything was ok, the system is working properly, so I started to install my software. I didn't not uninstall this program installed at the factory for system optimization that is (I do not remember his name now, but I mean this program that shows you update for your drivers - I remember that there are updates for the recognition of faces, videos etc..) I installed all the updates that this program presents, including the update of the BIOS. When I've done with the installation of these updates, I noticed that my keyboard does not work - with any button.

    By the time windows has ended it is updated, so I went to "Relight system" in the start menu of windows of the mouse. Then the closed system itself, I saw that windows updates itself as there are always after downloading the updates, but when all this happened at the end and computer must turn off and turn back on, I saw white screen. Computer has not restarted while I was expecting a few minutes. I turned off the computer by holding down the button market / stop and play again. Then, he didn't get up and it's like that for now. What will happen? Is - it caused by the BIOS update I did? Or - is it possible that this motherboard fell down? I think this is connected with the bios, indeed with his absence :) But when I switch on the computer, the keyboard still does not - I can see it, because the green light should appear on the CAPS LOCK button when I hit him if there is a power, even if the bios does not work. Am I wrong? Is there any possible to return BIOS configuration of fabric? I'm quite confused, because I have that for two months - it is like new. I'm excluding the dysfunction of the monitor.

    I hope any of you had a problem like this and there is a possible solution for it. My computer is always guaranteed.

    > My computer is always guaranteed.
    That of the point! Please contact nearest Toshiba authorized maintainer and leave check your laptop.
    There is serious hardware problem, and I don't think you can do something.

  • Does not begin with satellite C655-S5128 - power problem

    My laptop won't turn once I do a shutdown of windows.

    After it closes completely, when I try the power button nothing happens (or an led, or screen the wind. it does not start)

    After I remove the power supply and the battery for a minute and put it back, when I try to turn it on - it begins.
    I changed the RAM with good, same thing. I cleaned up the laptop and put the dough on the processor thermal quality.

    The model is: Toshiba Satellite C655-S5128.
    This thing happens because I cleaned up my laptop.
    (I mention that I have clean for laptops all day, so I know how to do)

    The unit doesn't power since clean you the laptop?
    Hmm these sounds like something was wrong during the cleaning procedure.

    I think you have a lot of experience in cleaning for laptop and you know how to do this, but obviously this time you made a mistake, sorry to say this.

    In my opinion, the question certainly pertains so a hardware problem I put t know that you clean the device and what parts (next to the CPU) have been removed during this procedure, but without doubt one of these parts have been affected or don't function properly.

  • Does not begin with satellite U840-110 - Windows 7 - loop start-up

    Hello

    I have been using a Satellite U840 - 110 portable since dec 2012 on a Windows 7 Home Premium operating system. Recently, the laptop was left in standby for a few days. When I tried to start the computer, it froze at the start. So I forced reboot by pressing the power button. After repeating this for a couple of times, he first showed a blue screen. Then, when the computer has been restarted, he showed a black screen with the following message

    "Windows error recovery".
    Windows could not start. A recent hardware or software change might be the cause.
    ...
    ...
    Run the Startup Repair tool or
    Start windows normally'

    I have tried both these options multiple times and every time at the end of the process, he might come back to these same screen. I also tried to press F8 and used advanced and tried Boot Options "not last know good configuration."

    None of this seems to work and I was not able to load Windows. I don't have a backup of my data and can end up losing a lot of vital information.

    Is there anyway I can solve the problem and get the computer to work again?

    Is it possible to recover data from the hard drive.

    Thanks in advance for the help!

    Is it possible to recover data from the hard drive.

    You can remove the laptop HARD drive and could connect to another computer using USB-to-SATA cart.

    After that, you could insert the HARD disk into the laptop new and could try to perform the Toshiba HDD recovery.
    (F8 - fix my computer - Toshiba-HDD recovery)

  • Error - file does not begin with '% PDF -'.

    Hi all

    I am getting an error for all my reports 11G BI Publisher saying PDF file does not begin with ' %PDF-'Local\EWHj-

    Where I'm able to see the data in HTML, Excel show etc...

    All these reports are works fine until last Thursday and no change was made to the models. I saved the sample data in the data model and associated with report BEEP again, but still no luck.

    When I tried opening in the generator of Template for troubleshooting it shows error below saying Preview failed.

    Template:\Oracle\BIPublisher\TemplateBuilderforWord\tmp\tmp\tmp.RTF

    SetLocale RTFProcessor: en - us

    SetData FOProcessor: Oracle\BIPublisher\TemplateBuilderforWord\tmp\0\download_data.xml

    SetLocale FOProcessor: en - us

    oracle.xdo.template.fo.area.NoAvailableAreaException: not quite render region. Please look in the output file incomplete for cause.

    at oracle.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(FormattingEngine.java:854)

    at oracle.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(FormattingEngine.java:845)

    at oracle.xdo.template.fo.elements.FormattingEngine.createNewPage(FormattingEngine.java:549)

    at oracle.xdo.template.fo.elements.FormattingEngine.startLayout(FormattingEngine.java:346)

    at oracle.xdo.template.fo.elements.FormattingEngine.run(FormattingEngine.java:143)

    at oracle.xdo.template.fo.FOHandler.endElement(FOHandler.java:752)

    to oracle.xdo.common.xml.XSLTHandler$ EEEntry.sendEvent (XSLTHandler.java:595)

    at oracle.xdo.common.xml.XSLTMerger.startElement(XSLTMerger.java:51)

    at oracle.xdo11g.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:182)

    at oracle.xdo11g.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1322)

    at oracle.xdo11g.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:366)

    at oracle.xdo11g.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:312)

    at oracle.xdo11g.parser.v2.XMLParser.parse(XMLParser.java:218)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)

    at java.lang.reflect.Method.invoke (unknown Source)

    at oracle.xdo.common.xml.XDOSAXParser.invokeParse(XDOSAXParser.java:166)

    at oracle.xdo.common.xml.XDOSAXParser.parse(XDOSAXParser.java:122)

    at oracle.xdo.template.fo.FOProcessingEngine.process(FOProcessingEngine.java:408)

    at oracle.xdo.template.FOProcessor.generate(FOProcessor.java:1231)

    at RTF2PDF2.runRTFto (RTF2PDF2.java:484)

    at RTF2PDF2.runXDO (RTF2PDF2.java:343)

    at RTF2PDF2.main (RTF2PDF2.java:235)

    Please advise on how to fix this ASAP.

    I'm using version: Oracle Business Intelligence 11.1.1.7.141014

    Thanks in advance...

    Concerning

    Olivier

    Thanks, got the fix. The issue is due to disk space on the server - not enough memory.

    Made available space, and now My PDF files work well in BIPublisher.

    Thank you very much..

    Olivier

  • File does not begin with '% PDF -'. Error opening PDF files in the browser

    When the user rent a report via internet explorer, it shows "file does not begin with '% PDF -'". I reinstalled acrobat, but it still does not.

    Pdf_Error.JPG

    Configuration as follows

    Adobe Acrobat Reader X

    Name of the operating system: Microsoft Windows 10

    Browser: Internet Explorer Version: 11.00.10586

    The file you are trying to open is not a (valid) PDF file. Contact the Web site from which you guessed it, and report the problem to them.

  • Port replicator does not work with Satellite P100-160 & Vista

    I just bought a Toshiba duplicator (part number: PX1173U-1PRP) but it does not work with the o/s Vista pre-installed on my P100-160. Can someone tell me where to find the Vista drivers for this device?

    It seems that the standard driver is not compatible with Vista and so you will need a new from the Toshiba page.
    You must remove the old driver and then install the new version.

    Good luck

  • Does not begin with C50 - A satellite - 1 6

    My Satellite C50 - has (6 months) is not started at all.

    With the associated power card, a white light is on. When I push the powerbutton, it becomes white for a second with a second white light at the front, next to the power light.

    The computer tries to start, and I can hear a clicking sound and immediately the powerbutton and second light on turn it off before. After 6 seconds, the lights, turn on again for a second (a nattering is understood) and the lights turn again, etc...

    I tried to remove the battery and the AC adapter and waited for a long time and tried again, without battery and battery.

    It's my second Satellite C50 - A - 1 6...
    The first died in a when it was a few days, with a black screen that does not work and I got a new... the one who appears to be dead too.

    > one who appears to be dead too.

    I agree with you: it looks like some serious hardware malfunctions.
    I put t think this problem could be related to the HARD drive because the failure of the disk HARD, the unit should light up properly but would not boot the system.

    I think that there is a problem with the motherboard or RAM problem.

    Can I just suggest you to contact the service partner since the laptop is still under warranty (6 months).
    I guess that the unit will be corrected for free

  • MicroSD does not work with Satellite click 10 LX0W

    Hi all

    I recently acquired a Satellite phone click on 10 LX0W Toshiba.
    The card says it's compatible with micro SD with UHS - I (maximum size: 128 GB)
    According to the SD Association, the Mode Bus UHS - I is compatible with the classes of speed UHS 1 and 3 (http://www.sdcard.org/consumers/speed/)
    However, the card, I bought (Kingston 64 GB, micro SD XC I, UHS speed class 3) does not work properly in this laptop but it works perfectly in other devices.
    The card is recognized by the Satellite click 10 but reading or writing is extremely slow and often give error messages. I can't even format it using this laptop.
    I think that there is something wrong with the Toshiba laptop, but can you give me your opinion please?

    Thank you!
    Kind regards

    Same thing here

    Toshiba click 10 with 10 windows, micro SD card 64 GB Kingston Class10 (UHS-1) does not work. Card is detected allright - can be seen in the Storage Manager, but cannot format it. If I format in some other device, Toshiba click 10 cannot use he - he can't write will destroy ntfs/exFAT FS on the map. The event viewer is full of SD card related errors.

    Any suggestion here, please?

    Pilot of 2006 (on windows 10) but cannot find anywhere ever.

  • Intel WiDi does not work with Satellite L850 - 1 L 1

    Google translator

    object I have a computer toshiba laptop satellite L850 - 1 L 1 and a television always toshiba model 50L7335D

    I can not interfacing with intel widi, what should I do?

    Thank you all

    The Satellite L850 - 1 L 1 was preinstalled and released with Windows 8
    You always use this system of Windows 8, or that you have upgraded to Windows 8.1?

    I m application because Intel WiDi is NOT supported under Windows 8.1 on Toshiba laptops and you will not be able to use the Intel WiDi with Win 8.1

    Here are the details that I found on the page of Toshiba:
    [Important notice for users of Wireless Display (WiDi) | http://aps2.toshiba-tro.de/kb0/TSB3903IF0000R01.htm]

  • I can not open the last closed tab, does not begin with the tabs

    Recently, I noticed that I can not open the last closed tab (the choice is there, but is grayed out).
    Then, during the restart, I notice that the system does not restore the tabs visited - even if this choice is made in the Options.

    I recently installed KeePass and its extension in Firefox and it seems to work (I don't actually use it often). And, recently, I had a problem where the system would resize my pages (as if I hold down the CTRL key while scrolling to me.

    Several reboots corrected this problem - but now I can't resize by pressing the Ctrl and scrolling (while holding the Ctrl key and tapping the - key will be resize the window).

    Any ideas on how to solve this problem without a complete reinstall? I have been copying my Firefox profile from one computer to another over the years and I am worried about losing my data / preferences.

    Thanks in advance!

    -John

    Uninstalled KeeFox and the problem disappeared.

  • Profile TB of Windows 7 on old pc does not work with Win 10 TB on new pc

    I have a new pc running Windows 10. I'm migrating my TB profile form the old pc that works under Windows 7. When I copy just the profile copy the old TB pc to the new PC, TB does not seem to recognize it. I even tried to keep the TB to create a new profile on the new pc, then replace with the old pc profile, in the profile name the same as the name of the new profile. That is, just replace the content of the profile created with the old profile.

    The problem is that none of the old profile information seems to be used. In particular, none of the folder structure for the 4 accounts that I appear.

    I think there was a restructuring of the profile in version 10 of Windows compared to the version of Windows 7. Is it possible to migrate my data without having to manually recreate?

    Thank you
    Tim

    Just a note for the future. Make it obvious what are your personal skills. Most of the silent usage down the answers and adds a lot of things that someone who knows what they are doing does not need.

  • Audio DVD chapter 1 does not begin with the video?

    Hi all

    I get on a 20-second delay on the reading/beginning of my chapter 1 audio DVD.  So the video plays silently for 20 sec., then slows down the way as the audio begins and expects that he will catch upwards and from there they play in sync.

    This file has also 7 other chapter on the timeline markers, but those are all triggered by chapter playlists.  Chapter 1 is the only chapter for this sequence that is directly related to a menu button, and this is essentially my button 'play together '.  Chapter playlists play pieces in this longer file.  There is also a second, shorter sequence directly related to a menu button, but there is no problem with the audio for it.

    Other details:

    The problem file is about 63 minutes.  edited in Premiere Pro CS6 1080i HD images.  Finished sequence coded as standard definition Lagarith AVI.  Then coded the opinion of Lag in the SOUL than MPEG2-DVD to min = 2.8mbps target = 6.4 and max = 8 (2 pass VBR).  Audio is encoded in Dolby Digital AC3 320 Kbps.  (The other, more short to the same encoding settings file.)

    The strange thing is that I used the same approach on an earlier version that used audio uncompressed PCM, and I have not experienced this problem.  The video encodes the parameters in

    this case were min = 2.8, target = 7 and max = 8.  The reason why I dropped the video bitrate was to eliminate a stuttering problem I had the effects of transition.  While I was there

    I thought that I would save space on the audio file using the AC3/Dolby instead of PCM.

    I already tried to create a new project and rebuilt from scratch with the same result.

    Help, please!  I have already burned so much time searching for answers to what I can't believe he (also the mysterious effects glitch issue)!  Get killed on my deadlines.

    Thanks in advance for any suggestion or idea!

    The f

    .

    Well, I thought that a few things.  There is probably more to this, but here's what made me through in case it helps someone else in the future.

    First of all, I was wrong above on my working initially PCM audio version.  I returned and retested and had the same problem.  I think that cheated on me which was was that I had tested the shorter chapters first, then when I tried reading complete 63 minutes, the info needed/data file was already loaded and ready to play.  Then when I tried the longer selection, the audio and video have played together because they are supposed to.  A point I want to be clear about is that my test was while making sure that the piece of 63 minutes read correctly in the second as the open media player and has shown the main menu.  No waiting 30 seconds for it to load up, process, etc.  It's how people will try to read the disc in the real world.  They do not attend the child along.

    So here's what I figured out.  First, after reading on the reading lists, I realized I needed, in addition to the chapter selections, I had already built.  So I used the playlist to enable playback of the section 63 minutes and then chapter playlists to give access to shorter parts within this segment.  Everything I had read before talking constantly using a playlist specifically to string together several chronologies, but it works for this as well.  Once I did, it was as if he took the media player need to 'think' about all Chapter markers that he would play through on this segment.  After this change in writing, the audio delay disappeared on one of the test computers.

    But the second computer still had the issue.  So the second part of the solution has been realize (after scanning of many consumers PC articles on the topic) has it easy for a media player to lose part of it is the feature due to the changes in the default settings of your computer.  In my case, for the reading and screening should, I have three media players on this particular system.  I went through and looked at all the parameters by default, and they were quite scattered (I am still under Windows 7 Professional).  So for this test, I went with the lowest common denominator and restore all my settings by default media player from Windows and rebooted.  If you happen to do, be sure to watch your AutoPlay functions, because they may still be in conflict, even if reset you the defaults of others.

    Once I did, I got correct reading on the second computer as well.  Still don't know why there was no clue as to the first part of the question with the preview yet, but honestly, I'm just glad I got through it.  Good luck if it happens to you!

    Jeff

  • Boot CD does not work with Satellite 5105-S501. What should I do?

    I have big problems with my 5105-S501

    The computer is totally screwed upward, with a little help from some virus evil. Well well, anyway; I thought it would be a good time to format the HD and reinstall the operating system.

    He liked the manual says, put the cd in recovery and applications started. When I choose install, I get the message "bad work". Even thought it was the cd that I got with the computer!

    Tried to format the hard drive manually in the comand prompt, did not work. The hard drive has been used and the computer could not force it out of use.

    Put a XP pro cd in the drive and tried to install that one. I have to choose to delete the current partition to format the HD, then I got the message "system unable to perform the operation requested on the selected partition. This partition contains files of temporary facility that is required to perform the instalation.

    Tried Fdisk, did not work. Same problem as above; the hard drive is in use, so forth and so!

    So guys, I really need help. What happened, and what can I do?

    Concerning

    / Peter Sweden

    Hi Peter,.

    I found something that may be interesting for you:

    When you run the recovery cd you get the error message 'bad machine '.

    The CD of Builder/Restore Configuration looks for a specific string of the DMI
    who identifies the model of the computer you are using and compare it
    information on the CD. If these two do not match error
    'machine wrongly' occurs. Your authorized Service provider can Toshiba
    Difficulty an incorrect bios corrupted or empty using a special diagnosis
    tool to rewrite the DMI string.

    If you are certain that you have the correct Configuration generator.
    CD recovery for your computer, then go to your most loved
    Toshiba authorised service provider.

    Maybe he can help you.

Maybe you are looking for

  • 14.01 Firefox when loading really sloww after AMD Catalyst 12.8 installed

    My problem looks different from the others in that I don't get graphics anomalies or unusually heavy memory usage. Similarly, the question that I have started after the installation of the AMD Catalyst 12.8. I installed a second time do the ritual AM

  • Satelite L300D - 24Q - no wireless card installed

    Hi all... The im problem seen is I formatted your laptop it has Vista Home Basic 32-bit after that I formatted the laptop says no wireless card is installed I tried drivers etcetc but nothing I do work. I have it running through the cable at the min

  • 10.22.3 update wooing.

    Cannot use the address of Safari to 10.11.3 field update. Do not click or search. Anyone have this problem?

  • Install a new HD player in a Satellite A30

    Hello I just bought a new 40 GB hard drive to replace the old 40 GB one into the a30 satellite address because he had a problem with it. How can I install it now? I put it in the laptop, but now when I try and turn it to run the recovery software scr

  • Mail.app encryption does not work in El Capitan

    I've been encryption of e-mails between colleagues and had years of this work on all OS x versions and it still works on the iPhone. However, I bought a new 12 "and did a fresh install and now cannot operate on El Capitan. My certificate is in Keycha