Does not display do not properly on the page linked to numbered list

Similar Questions

• XML with a member does not properly in the data model

  I use XmlDataAccess class to load an XML list in GroupDataModel. Everything works fine if the XML file has more than one Member, however, it does not load if the list contains a single member. I use the following code to get the XML content:

  QVariant list = xda.load(home.absoluteFilePath("MembersList.xml"),"/members/member");
  

  I need to know if the list has only one or 2 + members, so I can direct the data model to load with the appropriate settings. Can I know the number of members in the list?

  This problem is closely related to this question, where a solution QML is given.

  Hi Mitch99,

  Please see this forum post for a workaround for this problem. I tested it and confirm that it works as with QML.

• 4.0 ai2 - automatic adjustment does not properly in the result of the query grid

  Hello

  in 4.0 ai2 automatic adjustment does not work in the result of the query grid.

  Rather than shrink the columns to the narrower size taking into account topics and content (see 3.2), it auto ' enlarged to fit the entire grid of data query.

  She looks worse and makes it harder to see results at a glance.

  Bug and will be fixed for the release of v4.

• items of tag p does not show on the pages using css

  I converted to a site in GoLive to DreamWeaver and all the text by using the < p > tag does not appear on the site, but other styles appear, including < h1 > tags, etc.
  
  -J' have confirmed that the links to the css are correct and tact.
  -J' I cut and pasted the text in the < body > tag, which is the same specification as the < p > tag in place to check that it was not a typo. Did not help.
  -I have tried with and without the <>brackets.
  -J' have changed a paragraph in the page 'None' and used the < br > tags to make the jumps and it shows very well, but the next paragraph which uses the < p > does not work.
  
  Any thoughts on why this would happen?
  
  Here is the link of the typical header that I use
  < link href = "adv01.css" rel = "stylesheet" type = "text/css" > "
  
  Here is the actual line css
  p {color: #333; do-size: 13px; do-family: Helvetica, Geneva, Arial, SunSans-Regular, without serif; line-height: 15px}
  
  Thank you
  Jon

  Well, if you have a page on defined style that affects your diplay with white text paragraphs. This might be a reason.

  On your page privacy.php watch line 21;
  p {color: #fff;}

  the parameter of color to the fff everything make your text are white.

  Don't forget that on the styles page to replace the external styles.

  I hope this helps.

  Since you are using includes can't tell you where this code exists!

• Update panels does not properly since the 2015.2.1

  My sidebar panels does not work properly since the update. Hit the tab key does not hide the sidebar: sidebar remains visible. Also, sometimes I can't access the menu bar, or change view (shift f command).

  On the retina mi Macbook Pro, OS X 10.11 2015.

  I drove back to 6 and are no longer problems. Any suggestions on how to upgrade to the current version without problems?

  Make sure that you are on 6.1.1 the latest stable version.  Help > system information to check your version.  See these instructions if you are not on 6.1.1: http://www.lightroomqueen.com/how-do-i-roll-back-to-lightroom-2015-1-1-or-lightroom-6-1-1/.  6.1.1 LR has some important bug fixes to 6.0 which has affected a large number of people.

  Adobe has apologized for the mess in LR CC 2015.2 / 6.2: update of Lightroom 6.2 Release and apologies, update of Lightroom Import 6.2. So don't waste your time trying to get 6.2.1 work - wait for 6.3 and let others do the beta testing.

• HP pavilion ab027tx 15: Equalizer b &amp; o does not properly after the update of windows 10

  I've updated to windows 10. .and I have installed the latest driver realtek audio on my laptop from the HP website.

  The B & play 0 appears in the control panel and list of icons. But I am not able to change the mode(music/voice/movie) in the room B & O when you listen to music and watch YouTube etc .i have reinstalled the driver realtek audio, but the same problem appears. Please tell the solution for this problem

  It does not work when I use my headset

  Hi there @pavan_014.

  Thank you for visiting the Forums HP's Support and welcome! I think the problem you are having is your sound and headphones since the Windows 10 upgrade.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Although you had already uploaded/updated new drivers, I would suggest trying to uninstall all the drivers of its current:

  • Go to the Device Manager
  • Click sound, video and game controllers
  • Right-click on the audio driver
  • Click on uninstall
  • Restart your computer laptop twice
  • Try the speakers

  You can use the HP Support Assistant's drivers. Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated for Windows 10.

  Are - what you happened to try the audio Troubleshooter? It might be able to solve your problem automatically.

  You can find the great troubleshooting steps in document No. sound from speakers as well as resolution of the headphones and headset problems. This document contains several troubleshooting steps that may prove useful.

  Please follow provided the troubleshooting steps, re-post and let me know the detailed results of the troubleshooting.

  Thank you!

  Have a great day!

• fonts Mathematica does not properly after the senior at el capitan

  I used Mathematica 5.2 on my MBP with Mountain Lion. After the upgrade to El Capitan, there is a problem loading the fonts and Mathematica does not load correctly. Any ideas? Wolfram has a package of fonts, but don't know what fonts to download or how to install them on my MBP. Any ideas?

  Please, back up all data before proceeding.

  Launch the application book fonts and validate all the fonts. You must select the fonts in order to validate them. See the built-in Help and support article for instructions. If the font book detects any problems, solve them.

  Start in safe mode rebuild the font caches. Restart as usual and test.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or the boot volume is a software RAID, you cannot start in safe mode. In this case, ask for instructions.

  If you still have problems, then in the font book menu bar, select

  The file restore Standard ▹ fonts...

  You will be prompted to confirm and then enter your administrator login password.

  Also note that if you disable or remove built-in fonts, for example by using a third-party font manager, the system may become unstable.

• Play Lenovo Vibe K4 Note mobile store does not properly after the recent update...

  After the last update, my game store does not work correctly. A lot of apps is not proceed with the installation an error...

  Help, please

  Hi Digambar,

  Welcome to the community of Lenovo!

  Please perform the below mentioned the troubleshooting for the troubleshooting steps:

  1. go to settings--> Apps--> all Apps-> Google Playstore: clear the Cache, erase the data
  Note: All browsing history will be get deleted.
  2. If the problem is persists kindly update the playstore Google later.
  3. make sure that the update of the system is up-to-date.

  Please come back to us if the trobleshooting helped you.

  Thank you & best regards

• Other results: preliminary report does not properly during the first run in a loop

  I have an unusual problem with NI TestStand 4.1. I have a loop For and it contains, I have a call from sequence configured as a test of numerical limit. This test is configured to report additional results. All other results are preconditioned test cases. Here's the unusual part: during the first iteration of the loop, the test passes yet additional results for the parameters of all inputs are reported (output parameters are not presented at the time, but more on this later). Spend all additional this test iterations in the loop For and additional results are not reported.

  Regarding output parameters... If a test fails I'm expecting (input and output parameters) results to report. However when I encounter a failure only the additional results that are output parameters are displayed on the test report. Input parameters are not reported.

  If anyone else has experienced this? My expectation was that all additional results would be declared in case of failure. In addition, in the absence of a failure I expect not to see additional results. Thanks in advance!

  The short answer is that the condition of additional results for input is evaluated before it's called the subsequence, so that it uses the value of the previous iteration Step.Result.Numeric (or by default on the first).

  You can see this described as stage 15 in the following link:

  http://zone.NI.com/reference/en-XX/help/370052P-01/tsfundamentals/infotopics/step_execution/

  Kind regards

• Clock again R61 does not properly take the time

  My new R61 is chronically displaying the wrong date and time. Basically, it runs fast. I have reset several times over the past days.

  For example, there are about 20 hours, I turned on and found that it contains a date in 2009. I reset the date and time at the moment, and after 20 hours of the date that is displayed is 6 days in the future. I have not studied it enough to know if it is related to a particular power supply situation. Part of these last hours 20, the computer was hibernating on the battery power, part of the time it was running on AC and part of the time it was closed.

  Has anyone else seen elsewhere? I am running SUSE Linux (installed by Lenovo).

  This has been resolved. I installed Ubuntu Linux instead of SUSE Linux Enterprise Edition that was installed by Lenovo. The clock now works perfectly. Thus, it was not a hardware problem, but a problem related to the interaction between the hardware and the operating system.

• layout does not properly when the phone is in landscape mode

  Hello everyone,

  I created a Web page with 3 different configurations: desktop, Tablet and phone. Each presentation has several breakpoints. For example, the available phone has 2 breakpoints, at 375 px and 667 px.

  I've published on businesscatalyst. When I open the page with my iPhone portrait 6 mode, it works fine, but when I turn my phone horizontally, in landscape mode, everything is misplaced. The layout of phone 667 px does not appear.

  Any ideas why this is and how to fix it?

  Is it necessary to make 3 different models, for each device, or can I just do a desktop with several breakpoints layout, corresponding to the fixed and mobile devices? If I do this, my page will be considered by Google 'sensitive '?

  Thank you all,.

  Anne

  Hello Mimi_furnicutza,

  What Muse version do you use?

  If you use (pre-release) version beta Muse then I advise you to this post on the forum dedicated to the pre-release version.

  Adobe Muse Private Beta Program

  Kind regards

  Vivek

• For each does not properly in the XSLT file to two loops on a single node

  Hi all
  
  I'm transforming 2 inputs to a single target using XSLT. Both of the target entry of the same pattern and have the child element.
  In the XSLT, I gave this condition.
  "< xsl: for each select="$Variable1.payload/ns1:BookStore/ns1:Books ">
  < xsl: for-each select = "/ ns1:BookStore / ns1:Books" >
  "< xsl: if test="$Variable1.payload/ns1:BookStore/ns1:Books/ns3:BookId = ns3:Books / ns3:BookId ">
  
  My second for each does not work and in the target, I'm getting double elements. Help, please. Here are two xml source and xml desired target.
  1 XML source:
  
  < bookStore >
  < book >
  Name1 < name > < / name >
  author1 < author > < / author >
  < ID > 1 < / BookId >
  < quantity > 2 < / quantity >
  < price > < price / >
  < status > < / status >
  < book >
  < book >
  name2 < name > < / name >
  Author2 < author > < / author >
  < ID > 2 < / BookId >
  < quantity > 2 < / quantity >
  < price > < price / >
  < status > < / status >
  < book >
  < book >
  < name > NAME3 < / name >
  author of 3 < author > < / author >
  < ID > 3 < / BookId >
  < quantity > 2 < / quantity >
  < price > < price / >
  < status > < / status >
  < book >
  < / book >
  
  XML source 2:
  
  < bookStore >
  < book >
  < name > < / name >
  < author > < / author >
  < quantity > < / quantity >
  < ID > 1 < / BookId >
  < price > 100 < / price >
  < status > < / status >
  < book >
  < book >
  < name > < / name >
  < author > < / author >
  < quantity > < / quantity >
  < ID > 2 < / BookId >
  < price > 200 < / price >
  < status > NA < / status >
  < book >
  < book >
  < name > < / name >
  < author > < / author >
  < quantity > < / quantity >
  < ID > 3 < / BookId >
  < price > 300 < / price >
  < status > < / status >
  < book >
  < / book >
  
  Desired target XML:
  
  < bookStore >
  < book >
  Name1 < name > < / name >
  author1 < author > < / author >
  < ID > 1 < / BookId >
  < quantity > 2 < / quantity >
  < price > 100 < / price >
  < status > < / status >
  < book >
  < book >
  name2 < name > < / name >
  Author2 < author > < / author >
  < ID > 2 < / BookId >
  < quantity > 2 < / quantity >
  < price > 200 < / price >
  < status > NA < / status >
  < book >
  < book >
  < name > NAME3 < / name >
  author of 3 < author > < / author >
  < ID > 3 < / BookId >
  < quantity > 2 < / quantity >
  < price > 300 < / price >
  < status > < / status >
  < book >
  < / book >
  
  Thank you

  Hello

  It will not work like that... To do something like the following... Only one for each...

  
    
    
      ns1:Name
      ns1:Author
      ns1:BookId
      $Variable1.payload/ns1:BookStore/ns1:Books[ns1:BookId = $bookId]/Quantity
      $Variable1.payload/ns1:BookStore/ns1:Books[ns1:BookId = $bookId]/Price
      $Variable1.payload/ns1:BookStore/ns1:Books[ns1:BookId = $bookId]/Status
    
  
  

  I don't have to check the syntax, but you get the idea...

  I hope this helps...

  See you soon,.
  Vlad

• Support page does not properly to the FTP host

  I've recently updated my muse and once I did that one of my support pages will not load corectly now. I have 16 pages of support and all others work fine. I tried to download on another computer. created a new support page and fly over all content. restored the site to an older version that I had saved and are not allowing this unique support page load correctly. www.medamilitaria.com support page edge weapons. I also created the new page support edge weapons 2 today and it still does not

  Hello

  Seems that the page is not correctly exported to the root location.

  Please check if the page is exported to the root or not, if not then try to export to html format and then use any client FTP to move the html file exported to the root of your replacement existing ones.

  Thank you

  Sanjit

• Paragraph styles works does not properly on the table

  I placed a table created in Word, and then on the application of my paragraph styles.  However, not all my styles work fine.  Specifically my style of Description of the tool which includes a nested style.  The nested style does not follow the rules, given that it is.  The name of the tool should in Helvetica Neue Condensed Medium (in uppercase) while the next Description the en dash should be Helvetica Neue Light Condensed (normal caps).  On the contrary, it seems that the middle is applied randomly in the whole of the description.

  Also, when I apply my style request said I find myself with a lot of pink highlighted text implying that the police is missing when it is clearly not column.  This could be due to the recommended symbol?  Any advice on how to work around these issues?  See the picture below which shows the two questions.

  miz_nrg wrote:

  I do this in Word or CO-OPERATE?

  InDesign. You should be able to clear overrides from the paragraph Styles Panel menu.

  Check for character styles applied, you don't want to, also, if something is still wobbly.

• The selection list value does not change when the page is sent

  Hi all
  
  I have a selection list that acts as an entry for the report. the page is submitted using a button.
  The button uses the branch option "redirecting to page in the application. I select the same page.
  
  The problem is when I change other values in the value list always takes the first value
  
  I want to know if the problem is with the key or select list. What should I do about it?
  
  Concerning
  REDA

  Renon wrote:

  I tried your suggestion. Now that I ask, is the report is expected to show only when the button request is passed. I read to present the action of page the name of the button acts as a request.
  so now my report status is request = Expression1 and value of expression1 takes GO tell button name.

  The report does not appear but. I checked the session. It has the value of the selection list and the page is submitted as but the report is not displayed.

  ASK is disabled before the exposure treatment page unless it is set in a branch or a URL, this is why it has no value when they are referenced in your State in the region.

  Set the attribute request in your branch for & request to make available at the course to see the page the current value of the demand for treatment.