Does not load before the Welcome screen

I get to the sign in screen on vista and I put my password and sign in however it will not load past the loading screen.

Hello

What would you say if try you it in safe mode? It will allow you to open a session?

To access safe mode, press F8 just after the screen logo POST or original system manufacturer and before Windows starts to load. This should give you a boot menu where you can select.

If you are able to log on successfully in safe mode, you can start the troubleshooting steps described here:http://support.microsoft.com/kb/929135

If you are not able to connect to any account in safe mode, including the default administrator, please post back with some information about how and when this problem started.

Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

Tags: Windows

Similar Questions

  • My computer does not load before the login screen, even in safe mode

    I log on to my account (admin) by entering my password.  Then when I click on login I get the 'Welcome' screen and the circle that just guard spinning.  Nothing ever changes.  This happens both in Mode without failure.  I can sign in the guest account, but every time I try to do anything that requires admin login it freezes again.  Help?

    Hello

    in safe mode does not allow you whatever it is read this information

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    And make sure you only set the CD/DVD drive to be 1st in the boot order to boot from the drive that you have just made

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  • Satellite M40 does not load before the BIOS screen

    When I turn on my Satellite M40 unfortunately it does not happened on 7/8ths blue bar going across the screen.

    That left me completely baffled as what to do.

    Apparently, it could be repaired by removing the cables on my CMOS battery?

    If someone knows how I would go all this? or have any other ideas?

    Thank you xx

    Hi Dec,

    Blue scroll bars indicate that the Wondiows operating system is loaded from the hard drive. If this process hangs while loading, then it is likely that the hard drive itself is defetive or else the files that are being loaded are corrupt and cannot be loaded.

    Interfere with the CMOS chip will not fix this problem because the BIOS has already been loaded at this point.

    If you have access to a bootable CD/DVD (such as Norton Disk Doctor) then I siggest you boot from it and running a scan of your hard drive. Alternatively you can try reinstalling your operating system of the Toshiba recovery CD but it won't replace your own data on your hard drive.

    concerning

  • Premiere Pro does not load before the splash screen and the PC unresponsive during loading.

    Hello

    Specifications of the PC:

    NVIDIA GTX 750 Ti

    Processor with Six cores AMD FX-6300

    8.1 Windows Pro 64-bit

    My CC Pro first used to work perfectly fine, until recently.

    I use this program called nvidia Shadoplay to record my office, but on Saturday, January 16th, I noticed that it wasn't working for some strange reason. I tried to load the GeForce experience, which is a bit like a control panel for nvidia graphics cards, but I kept getting a weird error whenever I tried to open it. He said that I had no GeForce installed, so I uninstalled and reinstalled, and I had it working again.

    After that I got this problem resolved, I tried to start Premiere Pro. As soon as I tried to run the program, my entire computer became unresponsive. If I tried to click on something else, it would take up to 1 minute for my computer save the click. The screen Splash Pro first jump upward, but it loads through all the dll and prm files much slower. When it happened first, I tried Ctrl Alt Del my way out of it, but my computer would take 5 minutes to sign up the Task Manager. When I try to end the task, nothing would happen. The only way out he had to manually restart my computer by pressing the power button.

    I tried to look for solutions. I tried to move some files Premiere Pro took longer to load on the desktop, like the ExporterQuickTimeHost, EA SequenceRenderer and ExporterAVI files, but loading still takes a lot of time and my computer no longer met. Then I let it load completely, and it took about 30 minutes before I got and error like this:

    The application failed to initialize properly (0xc000001d)


    I don't remember the exact error. Then I upgraded my Premiere Pro CC 2014 to 2015 version and I had similar problems. Premiere Pro would always take forever to load, but my PC was a bit more responsive.

    I tried to run Avast and MalwareBytes, but they do not have the virus collection.


    I'd appreciate any help as I could about the problem, so I could get back to the Assembly as soon as possible.

    Hi Lecor,

    Update first Pro CC 2015 (9.2).

    Thank you

    Kevin

  • I've downloaded first 14 elements successfully to my iMac in early 2008, but it does not open before the Welcome screen.  Does anyone know why this may be?

    Photoshop Elements works very well. I also tried to download previous versions of Premiere Elements, but none works. I have also updated for the last OS and meet all the requirements of the system.

    eillenl

    What is Mac OS x?

    If you don't have it already, please see system requirements

    System requirements | Adobe Photoshop Elements

    1. latest version of QuickTime installed on your computer?

    2 problem exists with and without antivirus and firewall disabled?

    3 video card/card graphics driver up-to-date according to the web site of the manufacturer of the card?

    4. you say that Photoshop Elements works fine... is that Photoshop elements 14 and was part of the first Elements 14 Mac purchase?

    Let us begin here and decide then what then based on the details in your response.

    Thank you.

    RTA

  • Windows 7 does not start after the Welcome screen after password

    I've been running Windows 7 for the last 10 months with no problems until a few days ago. The PC starts fine, goes to the password screen, accept the password and then adheres to the Welcome screen.  The PC is not frozen, the cursor moves and the circle just keeps running load.  It starts perfectly in safe mode and safe mode with network.  This problem started to occur intermittently, but tonight, it took 4 re - begins to initialize.

    Would be grateful for any ideas.

    Hello

    a. did you software/hardware changes to your computer before this problem?
     
    Step 1: Try to perform the clean boot in safe mode and check. This is perhaps due to some third party software installed on your computer.
    Reference: http://support.microsoft.com/kb/929135
     
    Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
    Measures to check the application event log:
    a. Click Start.
    (b) in the search box type eventvwr.msc , and then on enter.
    c. now, click Application in the event viewer (local).
    d. now, looking for event log on the right side of the event viewer window.
    http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
    http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

    Thanks and greetings
    Umesh P - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • computer does not load before the windows loading screen.

    Hi basically I was watching a movie on my windows XP computer and it is essentially closed without warning.
    I tried to restart, but it wouldn't restart after loading with the blue bar screen.

    I tried to load in safe mode and it wont. I tried all the safe mode options you.
    I tried the last good config network still does not start.

    I also tried debug mode
    its not working do not and I really need all my things that are on the computer.
    I don't have a windows disc I bought this second hand about a year ago so any help would be thank you very much.
    Thanks in advance
    also, if anyone knows a way to fix this without an email from disk or reformatting windows me plz

    Jellybabyboosh,
    You should check with the manufacturer of PC for the recovery disc's different installation options.  You may be able to proceed to a repair facility and not lose anything. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • My laptop does not turn on and does not go to the Welcome screen.

    My computer says its update and there's just the TI shuts off and it resets again.

    Try the following steps:

    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not solve it:

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • HP2000: Hp2000 does not load to the home screen

    The other day I reset my HP2000 and I did the full restore. He got stuck at 21% for a few hours and I turned off my laptop. I retried and then he and he remained at 1% of all night, I turned my computer off again. I turned it on and there was just a HP logo and it would go black and 30 seconds later back to the HP logo in a loop. I turned off my phone and it turned on while clicking on F9 for the recovery of the system, I tried all the options and I can't go back to the homepage and lost my OS. My entire hard drive is erased and there's nothing left. I don't know what to do, please help!

    Hey there,

    What you're trying to use to recover your laptop?

    You have recovery media?

    You try to do a Factory reset using the media that you have created?

    You try to do a system recovery using HP supplied recovery media?

    You can enter the BIOS to do a test of material on the hard drive?

    If so, please take this test and let me know the results.

    You have beep codes or flashing LEDs?

    This is the section of recovery when 10 Windows does not start successfully performing a HP System Recovery documentation also. But there are measures that can help.

    It is said in the Resolution of the problems of HP system recovery document that I provided for you:

    "You can start a recovery from the recovery discs if you are unable to connect successfully to the computer. If you have already made recovery discs using the program of creation of recovery disks, make sure you run recovery from the same drive that you used to create discs. »

    • Turn on the computer and remove the internal hard drives brackets.

    • Then Insert the first disc of recovery in the drive.

    • Press and hold the power button to turn off the computer.

    • Disconnect all connected devices and cables such as personal media players, USB drives, printers and faxes. Remove any recently added internal hardware.
    • Turn on the computer.
    • Press the ESC key repeatedly, until the Startup Menu appears.
    • Press the left or right arrow key to select the Security on the line of the top menu, select Configuration of Secure Boot , and then press enter.
    • A warning is displayed. Press f10 to continue in the Secure Boot Configuration menu.
    • Use the arrow keys to select Legacy Support, and then use the right arrow key to change the setting to Activate.

      Use the down arrow key to select Secure Bootand then use the right arrow key to change the setting to disable.

    • Use the left arrow key to select the file menu, use the down arrow key to select save changes and exit, and then press Enter to select Yes.

    The Change of operating system startup Mode screen opens.

    • Enter the access code (which is specific to this screen on your computer) and press ENTER. If there is not a field in which he typing, typing when you see the screen of Change of operating system startup Mode .

    Close the Computer Configuration utility and the computer restarts.

  • Unable to start before the Welcome screen - error Code: 0 x 00000050

    original title: can not go beyond the Welcome screen, or the safe mode works - Vista

    About 2 days ago I received the 'blue screen of death '. I tried to connect to the main user account, but the screen would not go further than the Welcome screen. I then tried to open a session through safe mode, but that no longer works. After a few tries to connect to my user account, I tried to log in through the guest account, which has worked. The guest account has worked as it should, I was also able to use the internet. After that I tried to connect it to my main account again, but it still does not work. If anyone can help me with this, ID really appreciate it!

    Here's what I got on the blue screen of death:

    STOP: 0 X 00000050 (0XC084A5F1, 0X00000000, 0X00000000, 0X826C1498)

    Data collection for the crashdump...

    initialization of the disk for the crashdump...

    Dump start for the physical memory to disk: 100

    Total physical memory dump.

    If this does not resolve the problem: Please reinstall your copy of windows vista completely

    Depending on the symptoms, it is very likely that this problem is caused by a conflict with third-party drivers or services. If you have a back up of all your data, please reinstall the operating system. A new installation of Windows Vista is always an effective way to solve such a problem. After formatting the hard drive and reinstall Windows Vista, we will obtain a new installation of Windows Vista. It is more stable than the current system.

    I look forward to your reply

    If this post can help solve your problem, please click the 'Mark as answer"or if you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • the user does not appear in the login screen (el capitan)

    I see a user in the control panel users & groups of system settings, but it does not appear in the login screen. How can I fix it? I did a reinstall of system and see that the data is always there the prior installation.

    In users and groups > Connection Options, is the verified user list?

    If you have FileVault active it cannot list users until you type the Admin password for decrtpt disk.

  • acerEXTEND does not load on the computer (Windows 7)

    acerEXTEND does not load on the computer (Windows 7/10). Error message says I need to be administrator. Computer said that I am logged on as administrator.

    Good to hear it!

  • When I connect my laptop to my TV via the "vga" cable, the color red does not appear on the TV screen.

    Color problem

    When I connect my laptop to my TV via the "vga" cable, the color red does not appear on the TV screen.

    Problem with the video card, cable or tv.  I will try to update the video driver first.

  • My sound icon blackBerry smartphones does not open on the touch screen?

    My sound icon does not open on the touch screen?  All other applications open?  I locked it somehow?  Help, please!  : )

    Begin by a traction battery, if you have not already. With your phone, remove the battery and then replace it.

    I hope that helps you.

  • Hello!  I can't connect to the Adobe Story.  It does not load.  The loading screen guard just goes and goes.

    Have tried for hours now and nothing happens.  Does not load.  Can you help me?


    Thank you!!

    Hello

    Can you please try upgrading your version of flash player? Who could help

    You can get the latest from http://get.adobe.com/flashplayer

Maybe you are looking for

  • printing black ink is not consistent

    While a printer 6515... the color photos are perfect; printing black ink looks disappeared like little ink, some scratches... new HP cartridge... and automatic cleaning of the printheads... paper is zerox best quality... print the report displays onl

  • XML how to select several nodes

    I have an xml document that I'm pulling from a Web site url. The XML contains a bunch of stuff I didn't need. I would like just to select a few pieces of the XML and display. I use this to shoot 1 node List of NodeList = doc.getElementsByTagName ("NO

  • No access to the original Code signing keys

    The company I work for hiring a third party to develop our mobile application, but then later we took it back in-house.  A third already had a release for us until we take on the code.  Now I can't all of third-party developers to send me the csk fil

  • BlackBerry Smartphones Vodafone has the OS 4.5 for Blackberry updates

    Remember to update the desktop computer to the latest version: https://www.BlackBerry.com/downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22 Here is the link to Vodafone (Germany) software upgrades (don't worry... There are English installers):

  • Problem receiving blackBerry Smartphones Message delivery

    Hello: An acknowledgement of receipt is sent by my BB direct address when an e-mail entering made the request.  This is despite the fact that I am fixed in order to avoid that, through Messages folder > Options > delivery to confirm = NO Email settin