Does not network cards: get the "NIC Intel(r) 82562V 10/100 Network Connection knows driver or hardware related issues." I installed a new adapter Ethernet (Belkin) and it hit the same problem.

Dell Inspiron 530 with Vista Ultimate Edition with Service Pack 2 installed

I found a solution for me aleast... I installed windows xp drivers and all works like a charm... "computing" my ____.

Tags: Windows

Similar Questions

  • Unable to connect to a wireless network - "the network card know driver or hardware related issues.

    Can someone help with the following problem please?

    I'm unable to connect to the wireless network.

    I have an Acer Aspire 5315 with an Atheros AR5007EG wireless adapter. This shows that "working properly" in the Device Manager. I tried to re - install the drivers for it constantly. They seem to everyone install ok but I still have the problem.

    The symptoms are...

    (1) if I try to set up a wireless connection, I get "unexpected error occurred". There is no useful looking for messages in the event viewer.

    (2) if I use "Diagnose and repair" I get "knows the network adapter driver or hardware related issues.

    I uninstalled everything which I think could be the cause of conflicts. I scanned for malware. I have run chkdsk and sfc. I have all the updates from Windows Update. I tried in Safe Mode with networking, but still get the same results.

    OS is Vista Home Basic 32-bit SP2.

    I would be grateful for any advice that might help solve this please.

    I have now re-installed Windows and everything works fine.  I still have no idea what caused the problem, or if it could have been set without a re - install.

    Thanks for the replies.

  • Slideshow button previous and next does not work, someone has the same problem?

    When I put more than two slide shows on stage, the button previous and next stop work.

    Hi Bernard! Finally, I solved the problem. I put borders (area) in the upper layer than the layers of the slide show. =/

    Now, works great. Thank you very much for the help!

    Home

  • Adobe creative cloud installation does not work. Get the error code 207. All solutions?

    I recently got the cloud creative adobe and so far I'm not impressed with her. The adobe installer will not download the creative application of cloud. It keeps freezing for a minute and gives me this error message.adobeerror207.png

    And if you tell me that if I am on a managed network and I need to be wired connection to make it work, I am. I use a wired connection and my internet works perfectly. And I also tried disabling my firewall, antivirus software, basically everything what is perhaps perform the server. Still does not work... I tried everything and nothing works.

    Got it to work, it seems that it is bitdefender, my anti virus program sends me questions. However, I disable the antivirus program trying to get the installer to work and I still get the error. So I just straight up to uninstall bitdefender on my pc and it seems to work perfectly. Hope this helps anyone who has the same problem I did.

    See you soon!

  • HP SUPPORT Solution Center does not open. Get the parse error...

    I have a HP Pavilion dm4 and HP J6480 printer.

    When I try to open the HP Solution Center I get the following error message - "error Parsing file C:\Program Files (x 86) \HP\Digital Imaging\bin\hpqsloc\1033.xml".

    I tried to reinstall from the original disk from HP.  It works not - says my system (Windows 7-64 bit) is not supported.  But it worked a couple of years ago, when I did first install it.

    I tried to download and reinstall the drivers for my printer.  It does not work.

    I tried to uninstall HP Solution Center, but it wouldn't uninstall.

    I tried to rename hpqsloc to hpqsloc.old and copied the file from my computer of wives to mine.  It does not work.

    I tried to copy the entire file digital image from his computer to mine.  It does not work.

    I assumed that the simplest solution would be to uninstall and reinstall but no luck

    "" "Frustrated - HELP. '"    Thank you!!

    all right you have the software CD if so

    the CD opened by a right click on the CD icon and select open

    Then look for the folder named UTIL

    Then open CCC

    Then look for the uninstall_L3.bat doulble click on it

    you will be asked for your permission can be several times

    and you will see a black screen, then it will ask you to restart your computer

    now, try to install the software and it will work... good luck

  • The dodge tool and the "50% gray overlay" does not seem to be the same for the highlights. Is it?

    I read about the technique that uses a layer of 50% gray overlay as a non-destructive Dodge images.

    Even if each tutorial seems to say that they are the same, I can't get the same results, or at least not within a specific range (highlights).

    The dodge tool is a lot better by getting the contrast of the image. While the layer in overlay technique illuminates just in the region.

    Nobody knows what is under the hood on the dodge tool?

    Is it really the same as the technique of D & B?

    Thank you!

    Guido

    I found a really great tutorial that answers my question.

    the idea is to use the layer of gray to 50% overlay or soft light but hide. The masks are extracted from one of the RGB channels or even a version black and white image you need to dodge/burn.

    https://m.YouTube.com/watch?src_vid=54yyq9Pa2wk&feature=IV&v=OSmv7xzXs_0&annotation_id=Ann otation_2379737919

  • Windows Media Player does not. I get the message "Windows Media Player encountered a problem while playing the file. For any additional help click web help. »

    Original title: Windows Media Player does not

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    I have Windows XP Professional and have tried playing the CD through Windows Media Player. I get the message "Windows Media Player encountered a problem while playing the file. For any additional help click web help. "Then I do. Nothing here helps me. The player shows all my music but puts little red x showing that he can't play. Help! I downloaded version 11 of Windows Media Player, but it is saying the same thing.

    Thank you.

    Hello

    1. don't you also get an error with the message code?
    2 have you installed third-party readers part?
    3. What is the format of the files you are trying to play?

    Follow these steps and check if they help.

    Step 1:

    I would have you readers of third party temporarily Uninstall and check if persists it to the question.

    Step 2:

    Most likely you need codecs to play these files with Windows Media Player. I suggest looking up codec in the Internet that supports the file format, download and install them.

    See also:

    Player Windows Media for Windows XP supported Codecs

    WARNING OF THIRD PARTY
    Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    See also:

    Windows Media Player Error Message help

    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • My Vista pc does not work properly, getting the error 1097

    It contains errors of 1097

    and it does not correctly cause of which my system is facing problems.
    How can I reinstall the software?
    can I format the system?
    my pc name is Zenith and I got windows vista startup
    Please tell me the solution as soon as possible

    Hi Vikykhandare,

    1. when exactly do you get these errors?

    2 - does this happen when you try to run a specific program or with all programs?

    3. what issues you are facing?

    Method 1:

    You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

    For more information, you can consult the following link.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    Method 2:

    You can check out the following link and try the suggested steps to optimize PC for better performance and check what is happening.

    Optimize your computer for peak performance

    Optimize Windows Vista for better performance

    Hope this information is useful.

  • How to remove the part of an object grouped several using a shape (Pathfinder does not work, cannot get the knockout groups to work)? Kind of like the opposite of a clipping mask.

    I want to remove the portion of these legs inside of this graph, because a white circle solid at the Center intensifies the effect of the spiral.

    Background, the spiral is a mixture of the people flying around in a circle. The circle is then copied and turned several times. I have not developed the appearance again.

    There must be an easy way to do it, but I can't use the Pathfinders, the opacity mask, knockout groups, and make simple layers does not work. I just want to axe the legs of these easy people!

    1.PNG

    2.PNG

    3.PNG

    This is not correct

    4.PNG

    I do several models and want to find a way to make it easy and fast!

    5.PNG

    Thanks to you all!

    Emmanuel,

    If I (put) correctly, you should be able to get the opacity mask to work as follows:

    Select (only) the White path and the mixture and then in the transparency palette flyout on create with unchecked Clip opacity mask and mask invert checked.

    Who must hide the inner part of the mixture corresponding to the white circle and let the front remains visible oin the background (circle and all that.)

    .

  • Urgent - the sound recorder does NOT work after getting the window system 7 (64-bit)

    I have a problem with the sound recorder. After that I got the system with Windows 7 (64-bit), the sound recorder does not work. It's very urgent because I need to procticing my English pronunciation and the test day is coming.

    Please would you give me help? I really appreciate!

    Thank you very much.

    Eleanor

    A prompt by right clicking and select "Run as Administrator"
    and then at the command prompt, type: chkdsk /f r, then press the Enter key.

    If you are asked to plan the volumn to check the next time that the system restarts,
    Enter: y

    If you know the manufacturing of your hard drive you can also download their diagnostic software.

    Another use: SpeedFan has an online health analysis function
    (SMART tab) for hard drives. It will show how your disks
    compared with other discs of the same brand and model.
    http://www.almico.com/SpeedFan.php

    ========================================================================

    Run the SFC/scannow command. This will check and repair if necessary all of the critical Windows system files.

    Click on start / all programs/accessories then
    Right-click on the command prompt option and select "Run as Administrator".
    (or "Safe Mode" open a command prompt)
    At the command prompt, enter: SFC/scannow

    Windows 7 - order SCANNOW SFC - System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

    How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
    http://support.Microsoft.com/kb/928228

    J W Stuart: http://www.pagestart.com

  • Xbox Music does not update, I get the 0x8024001e error code after a certain time.

    When I got to my computer (it is a Samsung series 3), none of the applications would update. I reset the computer and all but one app update: Xbox Music. I can install any other application and update other applications, but when I try to update, it just be said pending, download (which is not actually download), or that it can not be installed, and then I get the 0x8024001e error code. Rather aggravating.

    She updates. I don't know why, but he just decided to update this morning.

  • System Restore does not: Windows XP, getting the error "system restore has not initialized because windows stops."

    "System restore has not initialized because windows stops."

    This message keeps me from using system restore any previous date, I chose. Restore fails every time.

    Window shutsdown too early. What can I do to prevent this?

    Try to boot mode safe (the F8 key as the computer starts from the tap) and run system restore from in Safe Mode.

    HTH,
    JW

  • Hi, when I export my video footage in adobe pro cs6 first, the film does not come out clearly when its ready for recall. I've never had this problem during and uninstalled the software and installed it again, but get the same problem. I tried

    My export settings are mpeg2 dvd and then Pal widescreen high quality that I always used. I have pictures that I tried to export was recorded on a sony 200 1080 50i pxw, can help pls

    You have changed fields less than superior. I don't remember what works with 50i.

    Also, parameters of culture to the left, use "scale to fill" and you will get rid of thin black columns left and right.

  • Does not update, said prev version needs to update and restart. It of not, get the same error

    Old version of Firefox running. Tried to update and get the message that a previous version has not finished installing and computer needs to reboot to finish. I restart, then try to install the new version, but just get the same error. I also tried to uninstall and start again, but got the same exact message he needed to finish the update before it could be installed.
    Suggestions?
    Thank you!

    Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

    Download a new copy of Firefox and save the file to the desktop.

    Uninstall your current version of Firefox if possible.

    • Do NOT remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

    Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

    • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

    Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • In the United States, I can use selector locale quick to get U.S. locale of Russia but in Russia, it does not work to go the other way or any other premises than elsewhere. After selecting a new language and restarting firefox, it remains on the Russian

    In the United States, I can use selector locale quick to get us to the locale of Russia (ru - RU), but in Russia, it does not work to go the other way or any other premises than elsewhere. After you have selected the local new and restart firefox, it remains on the Russian locale. Y at - it a fix for this problem?

    This has happened

    Each time Firefox opened

    == Looks like it started with a newer version of firefox, but this may have been coicidental

    You have other language packs languages installed?
    Tools > Modules > languages

    There is no module language en-US, to achieve that you must install the version of Firefox en-US and install other languages in the version.
    http://releases.Mozilla.org/pub/mozilla.org/Firefox/releases/3.6.6/Win32/XPI/

    See also http://kb.mozillazine.org/Language_packs

Maybe you are looking for