Does not print to the photo tray, but will display the test page

Similar Questions

• HP Officejet Pro 8500 a Premium: HP Officejet Pro 8500 a Premium does not print the docs of the computer, but will display a test page.

  HP Officejet Pro 8500 a Premium does not print the docs of the computer, but will display a test page.  I constantly get a message that the computer cannot communicate with the printer.   Not only it will be not be printed docs, it will not print web pages using 11 IE or Google Chrome.

  I used print and Scan of doctor, he always reports there are no questions and print page one same test so I can not print anything else.

  Whenever I want to print, I have to restart the computer.  After the reboot, I have a chance to print.   This problem started on February 15, 2015.

  My operating system is Windows 8.1.   I have unintalled HP, rebooted, and then reinstalled the software software:

  OJ8500_A910_1315 - 1.exe

  HP Print and Scan - HPPSdr.exe doctor

  HPSupportSolutionsFramework - 11.51.0049.msi

  All versions were last uploaded on 4 April 2015.

  I have a home wireless network (router Ubee DDW366).  All other devices in the House will be printed on the printer of 8500 has no problems: 2 Toshiba laptops, 2 Android phones and 1FireHD.

  The desk top is installed with a network card Netgear, I don't know the model, but I had it tested by a PC technology to verify that the card works.   The card and 8.1 of Windows have been installed on January 3, 2015.

  I have run virus scans and analyzes malware.  Whenever they show that there are no problems with my desktop computer.  What kind of desktop? Specially designed for my listing of... without brand computer parts store.  ASUS motherboard P6X580 Premium.  Now I will probably get hacked!

  I'm at my wits end.  And it's frustrating when I need to print something and the system hangs.  I often use screen printing to a word document to save in order to restart... but then I lose all sorts of features when I pick up what I needed.  It is also a time consuming.

  This printer we served well for two years and I have expensive cartridges pending; another two cycles of recharge.

  Help?

  Addendum: can I scan with the HP printer help.  I open the HP printer assistant, he "gets" the printer information, then I select "scan a document or photo" and the printer answers.   I have no problem with the sweep.

  It has been awhile, but I played on something you wrote.  "There could be a software conflict with the HP software" everything worked very well... impression was shifted at best; just didn't know if it would work.  So I would eliminate a program, reboot clean, try to print, and then reinstall the software.  I finally found the culprit.  I had a program running in the background, occasionally.  When it ran, HP does not print.  Stop the program and I was able to print... Do not have a problem since I found it... I do not say that it was a software to share files... so I replaced since this program with something else that doesn't cause problems...  It took a long time and I couldn't work the question every day.... but I can say that I have problems printing for the past 5 days!  I can print with confidence.

• My printer will not print from my Mac, but will display a test page.

  Product: HP OfficeJet J4580 all-in-One

  Operating system: Mac OSX 10.5.8

  My printer will only print the test page or making copies.  It suddenly stopped printing any document from my computer.

  We will restore the print system:
  
  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Black C5380 of ink does not print on the alignment Page and alignment fails only

  My printer will no print in grayscale for all documents, but I can print color photos.  I replaced the cartridges and done his own head, when I do an alignment that he says he can't and cannot align.

  Hello! Welcome to the @Karen68 forums

  I read the error message 'alignment has no' you see on your Photosmart C5380 and I wanted to answer with my suggestion for you!

  Check out this guide and to try all the steps, I hope it get through the issue of alignment:

  The error "The printer alignment can't" message on the control panel

  If troubleshooting does not help, I would finally support.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Happy Monday

• HP3209a not printing black and white enamel but will display the web page

  I'm on Mac OSX10.8.  My HP Photosmart 3209 has suddenly stopped printing yesterday and had a pop up that says I got printhead problems.  I spent two hours on the phone this morning with two so-called experts feel, the first who said that the problem was with my iMac (he couldn't find it) and the second who said it was a problem with the printer (he couldn't find it).  The printer is connected to an iMac by USB cable.  It will not print e-mail or most of the pages of black and white but now curiously print a web page. BTW, I put new ink in it and did not help anything, and Printhead Cleaner ran about two dozen times.  I try to run an alignment but the page it prints which is for most of the blocks of color blue on half a page is not recognizable on the scanner when I try to run the alignment.

  I think that you always print head problems.  Go to System Preferences > print & Scan.  Click on your printer, click Options & supplies.

  From there, go to utility > Open Printer Utility, then clean the print head.

• HP Deskjet 2132: The date showing on my screen but does not print on the sheet.

  The header and the footer shows on my computer screen, but it does not print on the print current sheet.

  I tried the solution, but it did not work, and the strange thing is that if I change from Portrait to landscape of the date part prints but not all of it.  21/02/16 just found the problem. I was using the Google Chrome browser and I switched to Mozilla Fire fox.  Walla, the problem has been resolved. Thanks a lot for your help. I don't know much about computers so I'll have more questions later.

• Samsung SCX-4100 does not print on the computer Windows 7 x 64

  I have a Samsung SCX-4100 printer.  It worked fine on two different computers of precedents, one with Vista and the other running Windows 7 (x 32).  I updated to Windows 7 Professional 64 - bit and charge computer driver Samsung x 64.  The printer appears installed but do not print.  It is listed on all my programs and, when told to print, the printer icon appears in the taskbar lower, but no document don't appear in the queue and the printer does not print anything.  Printing only that was the case, the installation, it printed on the test page correctly.  I used various troubleshooters in Windows, I've deleted and reinstalled the printer several times and nothing has changed.  I tried to re - setup the USB port to which the printer is connected, but I received this statement each time: "an error occurred during port configuration" and so I can't try to re - port.  I must tell you that I've initially left the programs and settings 32-bit for the 64-bit computer using the program PCMover, and I wonder if somehow I sent some incorrect settings to the new computer that are now interfering with the installation of the correct printer.  You have any ideas how I can fix, or help out at least that?

  For all those who may have been following this thread, as stated above, I have been unable to solve the problem using the recommendations provided by the technician above.

  However, after endless research and several experiments, I found a fix on another site:

  In Regedit, navigate to HKEY_LOCAL_MACHINE > SOFTWARE > policies > Microsoft > Windows NT > printers.
  Right-click on the Printers folder and select Delete to remove it.
  Restart the computer.

  It was the only thing that has worked to enable printers to work on my 64-bit machine.

  I hope this is useful to someone else who was pulling her hair on this issue.

  Brad

• text does not print on the bottom of the page

  text in black does not print on the bottom

  Hello

  First, try a hard reset with the printer.

  Hard Reset:

  Unplug the power cord from the printer and the wall

  Take out the toner cartridges.

  Wait for 30 seconds

  Plug the power cord into the printer and the wall (be sure that the printer is plugged into the wall and not a surge protector)

  Replace the toners/cartridges in the printer

  Let me know the results

• A PDF file does not print on the new HP printer

  I recently added a printer HP CM1415fnw in my office and I can't print any PDF documents. Word and Excel print very well. Why?

  Well, the point is moot, because the true culprint was my lame OS

  (Vista), so my laptop is in the shop getting Windows 7... Thank you for all

  your advice!

  Bill@VT http://forums.adobe.com/people/Bill%40VT has created the discussion

  "Re: PDF files does not print on the new HP printer.

  To view the discussion, visit:

  http://forums.Adobe.com/message/4558299#4558299

• I have placer place text, and then change the font size, but it does not flow to the next page

  Hello! Tell when I have text that fits into a page, because it is absorbed in indesign with a great font size small. Then when I want to increase the font size it does not continue on the next page. How can I get there?

  Thank you very much!!

  Click the port at the bottom right of the text block to recharge the cursor, go to the next page and click to place it.

  If this is new to see you:

  Text of wire among images in Adobe InDesign

  InDesign 03 - Mini tutorials - threads of text - Threads view - overflow of text warnings areas - YouTube

• How can I keep STROKE does not spread on the next page?

  My InDesign document has a few features that are on a 45 degree angle and I'm trying to keep them does not spread on the next page. I can't send them to the back which will not work in this case. Is it possible to prevent them from showing on pages all about? Thank you!

  Why not just remove the offending part of the path? Move the curvilinear straight ends or use the scissors tool to cut what you don't need.

• I can't print from firefox. The paper feeds through the printer but does not print. The same web pages appear when I use internet explore. And the printer works fine with word, Excel etc, but not with firefox.

  Whenever I try to print a page open in firefox it will not print. The paper feeds through the computer, but don't not pring.

  See this:
  
  http://KB.mozillazine.org/Problems_printing_web_pages

• HP Officejet 4630 portable printer: HP Officejet 4630 printer does not print until the computer is restarted

  When I send a document to the printer; It shows in the print queue, but does not print.  When I restart my computer, the document will print.

  The same thing happens whenever I have send a document to the printer.  I have a WiFi connection from my laptop to the printer.  The blue icon on the printer lights indicating that plugged.

  Why does only work when the computer is restarted?  I ran the HP Support Assistant, and it does not find the printer; even if the printer seems to find the computer once I restarted the computer.

  It's embarrassing to say and I'm not very technical interest.  Any suggestions will be greatly appreciated.

  Hi @Maggie78

  Thank you for your patience.

  You can try the following:

  Creating a TCP IP port
  
  1. print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
  2. on your PC, go to the Panel control, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
  3. click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  4. Enter the IP address of the printer.

  Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)

  Hope that helps!

• OfficeJet 4500 G510: officejet 4500 does not print with the new computer

  Bought a new lenovo so it of a new computer running Windows 10 and cannot get printing to work with her.  He moved with a wired ethernet, or even wireless, but does print the test page or anything like that.

  Have uninstalled and reinstalled several times without success.

  Tried to install with a USB cable and that crashes, even bought a new cable and still nothing.

  I put off and then to refresh the printer and that did not help either.

  Installing updated drivers and the computer sees the printer and says it is ready and works fine, but do not print.  Convenience store can't find no problem either.

  The printer works perfectly with my iPad in the next room is not the printer.  So for now I have to send my documents to myself and print from the iPad, which is annoying.

  Any thoughts?

  Thanks in advance

  HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning.

  Download and run printing HP and doctor Scan quickly and automatically perform several tasks of troubleshooting.

  When you click this link, HP Print and Scan Doctor is downloaded using the download of your Internet browser capabilities.

• HP deskjet 3620 does not print on the internet

  My hp deskjet 3620 is taken offline whenever I try to print a page of IE 11. Is the problem of the printer? I can print out IE 11.

  Hi esac42,

  I understand that you are not able to print from Internet Explorer to your HP Deskjet 3620, your printer goes offline. You are able to print from other programs without problem, until that we know there is no problem with the DJ 3620. Can you please let me know the exact operating system you use?

  I would like that run you HP print and scan doctor- it was designed by HP to offer users the features and troubleshooting problem needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  If you run the PSDR and still get the error the printer offline, I would like to continue you here: "Printer is off-line" Message appears on the computer and the printer does not print, I know it's only IE that you are having problems with, but please fill out all of the recommendations.

  I'll watch for your reply.

  Thank you