Does not recognize a narrow black border a white border when printing without margins

Similar Questions

• my pc does not recognize the cd drive. I tried restoring the system without success.

  Windows does not recognize the cd drive

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HP laserjet 1022 does not wait for the user to turn the pages when printing double-sided

  My Hp laserjet 1022 printer working properly for years.

  So far, when he executed more paper he tried a couple of times to get more paper and then stops with a message on the PC it is out of paper.

  Very annoyingly, this has changed recently, now when it is out of paper, he tries a couple of times to get more paper and watch the message on the PC, saying that it is paper and then again, try a couple of times to get more paper and again shows the same message on the PC and him back... This continues to go on and on.

  It's especially annoying when trying to print double-sided. Before he used to stop and ask you to turn the pages to print the other side. Now the previous behavior overrides the break to turn the pages and keeps it will try to get more paper. As now, it does not wait for the user to turn the pages, in general it spoils the impression out by getting another paper that is not what I wanted, he drives me crazy! It's really hard to print anything double face now.

  All solutions?

  Operating system is Windows 7, I just downloaded and installed the latest driver for this printer "2013-01-09, Version: 20120918" and I get the same behavior. In the properties of the printer that I put some State Messages to Off and at least I don't get the full windows message screen poping up every time the printer is trying again to get more paper. I have not found all the other parameters that may affect this behavior.

  Help!

  Hello

  I solved the problem! I found the original CD for the printer. I uninstall the current driver and then install CD and now when the printer is out of paper trying to get paper a couple of times and then stops, as it used to be.

  Thanks for your help.

  Martin

• Vista does not recognize my camera even if I hear 'bong' when I plug?

  I tried to download pictures from my Nikon D5000.  I plug it in, turn it on, hear the "bong" that windows knows I connected a new device and then nothing.  I try to download from my photo software but my camera is not listed as a device to transfer, I go to my computer and try to find the camera - not here.  I followed all of the directions, I saw on this site - I have uninstalled all the USB drivers and reinstalled ran Windows Update and installed all available updates, contacted Nikon but their software doesn't recognize it, reinstalled the driver of Nikon, but Windows says that it was already there.  The only thing I couldn't do was run the program Microsoft Fix It - I received a (non-specific) error just says there is an error and try again later.  ??  Is there anything else I can try?  I am running Windows Vista Home Basic Service Pack 1.  Thank you!

  Hello

  Try the following steps.
  Step 1:
  I suggest you to uninstall the Nikon D5000 driver from Device Manager.
  (a) click Start type Device Manager.
  (b) locate and expand imaging devices.
  (c) locate and right click on the device.
  (d) click on uninstall.
  (e) restart the computer.
  Step 2:
  Download the latest driver on the manufacturer's site, keep the computer in a State of startup boot, install the driver on your computer and check the status of the issue.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
  http://support.Microsoft.com/kb/929135
  Note: When you have finished troubleshooting, follow these steps to reset your computer to normal startup.
  Step 3: I would also suggest you to update the drivers from the chipset of the motherboard manufacturer.
   
  Step 4: update the update of Windows Vista Service Pack 1 update for Windows Vista Service Pack 2 and check if the problem persists.
   
  Hope this information helps.

• during installation of HP DESKJET INK ADVANTAGE 3525 does not recognize original black print cartridge

  Hi all

  during the installation of my new printer HP DESKJET INK ADVANTAGE 3525 I discovered, that the printer does not recognize the new black ink cartridge. The black cartridge, as well as the other colours, is original and it was packaged with the printer.

  Thanks in advance for your help and have a nice day!

  Hello @Hugh_G,

  Welcome to the HP Forums

  I'm sorry to hear that your printer does not recognize the black cartridge, and I am happy to help you solve this problem!

  Are getting you any kind of error message about the cartridge? If this is the case, please follow this ink cartridge problem: "Not compatible ink cartridge" or "Ink cartridge must be replaced" message for HP Deskjet 3520 e-all-in-one and HP Deskjet Ink Advantage e-all-in-one 3520 Printer series document and, hopefully, the printer will recognize the cartridge after these steps.

  Maybe that's not the question if you thinking maybe that black ink is not printing? If this is the case, please try these steps printer prints blank Page or not printing black or color ink for HP Deskjet Ink Advantage and Deskjet 3520 e-all-in-one printer series for a possible solution

  I would like to know if these steps help and what happens after trying them and I hope that we can get things working for you!

• Satellite Pro L500-1 t 5 - does not recognize battery

  My new Ii received only today) computer laptop Satellite Pro L500 does not recognize the battery. I can't turn it on without AC. When the AC is turned on, the battery LED lights up orange for 20-30 seconds and then turns off, and Windows 7 says, that there is no battery.

  I read on this forum, that I can put my battery in, while the windows is already happening and I tried, he founded the battery for 20-30 seconds and starts to load, but that she doesn't even once is not the battery. I checked the BIOS version, 1.90. It's a more later, as I understand it, isn't?

  What can I do with it? It's hardware problems and I should post in the service or can I fix it somehow?

  Hi Ponny,

  What happens if you leave the AC adapter plugged in for 24 hours or overnight and then you start the laptop without an AC/DC adapter? On the first charge, it takes a little longer until the battery is fully charged.

  If that doesn t work, you need to contact the store where you bought it or authorized service provider. In this case, you should get a new battery free.

• Windows 7 Desktop w/printer, my desktop XP in network computer, cannot print bc I wonder for the current print driver, I got a current version, but it does not recognize it? How can I get the printer to work?

  I have a desktop computer Windows 7 connected to an HP laserjet 4050N printer, when I try to print from a computer to Office XP, via the network, I wonder for an updated printer driver.  I downloaded the latest print driver, but it does not recognize the file inf and again requests a current print driver.  How can I get the XP desktop to print on the printer connected to the Windows 7 Desktop?

  Hello

  I suggest you to follow the steps mentioned below and check if it helps.

  Method 1:

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=18322&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=25475

  For your reference: How to use Windows XP to share a printer with other people on your network: http://technet.microsoft.com/en-us/library/bb457001.aspx

  http://TechNet.Microsoft.com/en-us/library/bb456988.aspx

  To connect to a printer on a network: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/print_connect_net_printerw.mspx?mfr=true

  Hope this information is useful.

• When I insert a blank CD the message is "insert a blank disc" he does not recognize the empty space and says zero bytes free.

  I have a new desktop computer Dell 9010.  The CD/DVD drive is 16 x DVD-ROM SATA.  When I insert a CD with files it contains with free space, it says that I need more free space.  It does not recognize free space.   (free 0 bytes)

  When I insert a blank disc the message is "Please insert a new disc.  The drive doesn't recognize free space on a disk.  It's the same thing with discs CD - R and CD - RW (52 X and 12 X respectively).

  I have a new desktop computer Dell 9010.  The CD/DVD drive is 16 x DVD-ROM SATA.  When I insert a CD with files it contains with free space, it says that I need more free space.  It does not recognize free space.   (free 0 bytes)

  When I insert a blank disc the message is "Please insert a new disc.  The drive doesn't recognize free space on a disk.  It's the same thing with discs CD - R and CD - RW (52 X and 12 X respectively).

  ====================================
  The following items may be worth a visit:
   
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

  (scroll down and expand the section: "Let me fix it myself")

• Windows 8. Toshiba Satalite. Windows does not recognize ethernet hardware.

  for some reason, I, ve lost my ability to connect rigid cable to my router. Laptop computer, windows 8. Toshiba Satalite.

  Windows does not recognize the hardware. How can I use add hardware without any driver?

  Troy

  Go to Toshiba, download the latest driver and install it.  It does not recognize the hardware, because the driver is damaged

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (works on win 8 & win 10)

• My version of Lightroom does not recognize the RAW Olympus Pen - F file

  My version of Lightroom, 6.3, does not recognize the RAW Olympus Pen - F file. When an update that contains my new camera? Thank you

  Yes, version 6.6 will support raw files.

  Of course, you can test and report.

• First does not recognize the video modules.

  First does not recognize the video modules. I have updated the readers without results, also update the bios. All the other adobe products work except the first.

  You have a laptop with dual video?

  -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html

  -http://forums.adobe.com/thread/1001579

  -Use the BIOS http://forums.adobe.com/thread/1019004?tstart=0

  -Why link http://forums.adobe.com/message/4685328

  -HP Fingerprint/password in conflict http://forums.adobe.com/thread/911575

  -Utility from Mac http://forums.adobe.com/thread/1017891?tstart=0

• HI - even if I installed a new cartridge (black), the printer does not recognize it

  Hello - I have an officejet 4500 - G510a, and even if I installed a new cartridge identical to that just missed, the printer does not recognize it and don't use it. I would really appreciate the help on this one. Thank you

  Also please mark it as accepted if Solution my answer has solved the problem.

• The Web of Toshiba site does not recognize of my drive hard number and P/N

  Hello

  There is a little less than two months, I bought my HDD Toshiba Canvio Basics 3.0 from Amazon. The hard drive has stopped working for some reason any (I drop or something, it simply stopped working).

  Of course, I was trying to use my warranty to repair or Exchange it, but the Web of Toshiba site does not recognize my serial number and product number. They are just there, black and white on the sticker on the back of my hard drive, but the site says they are not valid.

  Someone has an idea what is happening? I would rather not throw 50 euros by the window for less than two months of use.

  Product number is HDTB105XK3AA - and not to HDTB105 * E * K3AA like some sites say (including Amazon).

  Thanks for your help.

  Stand by. Have you contacted Amazon using Amazon options for repair under warranty or Exchange?

  Check please help Amazon option and collect detailed information on defective, damaged or significantly different returns.

  Two years ago I had problem with the mobile phone bought by Amazon and I send direct Amazon with bill Amazon.

  By the way: can you please post the link where you have tried to check the serial number of your HARD drive?

• Why iMovie does not recognize photos in projects?

  Why iMovie09 does not recognize photos in projects?

  I made a new projects and adds several still images. Photos are displayed in the project field, but right the screen remains black.

  I checked one of my old projects with still frames that will work perfectly, but it has the same problem - the photos do not appear on the screen more.

  Is there something that can be done? I also noticed that I can't get iPhoto to iMovie to add photos, not more, and Photo Booth is available.

  An iMovie11 upgrade would solve the problem? I do not have doen that, due to the large amount of results negative comments on iMovie 11 receipt.

  This is a bug widely reported with iMovie versions 8 or 9 ('09 or 11) under El Capitan.  Only iMovie 10.1.1 works 100% on El Capitan.

  Geoff.

• getting an error of cartridge, cartridge is there but does not recognize

  the computer does not print cartridge error, it does not recognize the black cartridge. I removed and installed several times, is based on my printer?

  Contact the manufacturer of your printer and see if there are others who have had the same problem (there may be, there seems to be a common complaint).

  If it is a cartridge refill, rebuilt or third party, it can never work with your printer.

  Give more information, such as the make and model of the printer. is extremely useful. Without specific information, you will get very general assistance.

  SC Tom