Does not start Satellite A200 - checksum of the header file is possibly corrupted

Does my Toshiba Satellite A200 on Vista.

The following message appears on the screen: "the file is maybe damaged. The checksum of the file header does not match the checksum calculated.

I tried reinstall drive, but it does not solve the problem.
The following message is displayed: status: = xc0000428 (as well as instructions that do not seem to help at all).

What can I do?

Hello

You mean that the new installation of operating system using Toshiba Recovery disk didn't?
Hmmm, in this case, it seems like a RAM problem

I searched a bit on the net about this error and found some info that might be linked to the faulty RAM memory.

You should try to verify if a single one single module of RAM is affected.
Otherwise you need to replace the two modules and then should try reinstalling the operating system.

Welcome them

Tags: Toshiba

Similar Questions

  • my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem. __

    my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.

    Try to restart your machine and pressing F8 before the spash screen Windows appears.  Choose the option "last last known good configuration".

    If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.

  • Anyone know how to get your money back?  My CC application does not start and I have tried the suggested workaround solutions listed above and they have not worked for me.  The amount of problems listed here in the forum, I have to ask the product is real

    Anyone know how to get your money back?  My CC application does not start and I have tried the suggested workaround solutions listed above and they have not worked for me.  I'm new to the CC Apps but use the versions installed for years.  The amount of questions listed here in this forum, I have to ask the product is really stable?

    Thank you.  I've deleted and reinstalled.  Seems to have solved the problem.

  • Re: Satellite A100-011 does not start, a black screen at the beginning

    I have a Toshiba Satellite A100-011, which is almost 5-6 years. It suddenly started to behave abnormal.

    First of all, I started to get a 1-2 sec black screen when he was running. The screen was on and off occasionally.

    After a few days, I could not started upward from my windows xp sp3 operating system. I tried to start in safe mode with networking to see if I had a few spy, virus or something. I ran avast, hijact, ad-aware and some more, but not found anything.

    Later, I tried to format my laptop with a xp professional, but this time I can't see any reflection that passes more fun running and a black screen. I just got a black screen at the beginning and it does not start.

    I plugged on a television screen, and here I have started. I have re-installed all the drivers and formatted, but all I get is a black screen on my laptop at the beginning.

    What should I do now? Do you think I have a problem with my screen of HW or a driver problem with nvidia geforce go 7600? Maybe I'm missing something?

    Thanks in advance for all replies.

    If you can see the picture on the TV there are a few s laptop display problem. Y at - it some problem connection or display itself.

    You want to fix it yourself? You can disassemble the laptop?
    I mean if you have any experience with this kind of things that you should seek professional help.

  • Does not start satellite C50-A-1E2

    Hello
    When press the power button / the notebook does not start. The screen is black, the fan is running and waving up and down. After 10 to 30 minute wait to start the laptop is well until next time. The laptop is not old, bought about 15 months ago. Nothing has changed, no BIOS changed also. The only change is Windows 10. Any ideas?

    Remove the battery and try to start with the power supply only.

  • Tecra 8100 - does not start and no activity on the screen

    Hello

    My Tecra 8100 not start or take me to the BIOS Setup. It lights up, swirls the hard drive, but there is no activity on the display. The only way I can get something on the screen is turning with the F12 key when I get the 'ready for the update of the BIOS. Place the BIOS update diskette in the drive "... message. So I tried the traditional method of updating the BIOS, found on the Toshiba site, but nothing helped. The machine seems to read the disk (that contains the downloaded BIOS) but does nothing. It is just there for centuries, with the disk light.

    The last two days I have trawled thro much views and even took the whole machine goes to check the connections loose, but I found no answer yet.

    Can someone out there please help?

    Thank you very much

    Hello Rory

    I did the BIOS to be updated several times, but I've never seen this message at startup upward. You did it the traditional method as described in the document which you will find under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B IOS & FID = TRO0000000b07?

  • XP does not start normally. Must use the F8-last known good configuration.

    For the last three days, XP does not start normally. I use F8 and you select last known good configuration that worked. It gets old. If I try to boot normally, it freezes on Autontfs not found I have a MSI wind Pc with Windows XP Service Pack 3.

    Hello Susanherna,

    The last known good configuration is created during the logon process. This means that something has changed between the time that connect us and time that shut down us the computer.

    At the next startup, select instead of last known good configuration safe mode.

    We want to then try a clean boot.

    The following articles describe this process on Windows XP:

    http://support.Microsoft.com/kb/310353

    http://support.Microsoft.com/kb/316434

    Let us know what are the results of this and we will continue from there.

    Best regards

    Matthew_Ha

  • Help my pc does not start after you have uninstalled the video driver

    Please help my pc usually start more after I uninstall my nvidia driver mx/mx 400 with YourUninstaller I try to use this option to uninstall my driver in super mode then prompt YourUninstaller and asked "do you want to restart your computer now" then I click Yes but YourUninstaller software now on the race because the YourUninstaller has finished remove the registry left behind by uninstalling normal after that there is no register found after scanned. Then I click Next, then I closed this request. Then I restart my computer manually but blocked windows then I wait 5 or 10 minutes, but do not restart Windows. I turn off my APR, then I turn on my pc then windows does not start. I try to reformat but it's the same story that windows does not start. I try to remove the cmos battery hoping it will solve then it works. But the problem is that I insert my bootable cd, it runs automatically even I don't not press a key on the keyboard, the process to continue installing windows, it sounds I can not install my windows correctly. When he restrart the process goes again to load all the drivers everywhere why did this happen? Is there something wrong with my HARD drive once I used YourUninstaller?

    RAM of a problem with you, I guess. Remove the RAM and clean including the slot of the motherboard.

    http://www.computerhope.com/beep.htm

    If this post answers your question, click mark as answer .

  • Windows Vista does not start upward, with success since the closure complete

    Hello world

    I actually had this problem for a long time, but I'm just now to a point where I'm ready to take a lead in fixing it.

    I can't identify when it started, but Windows Vista does not start upward, with success of a full stop. He gets to the screen where, in general, the green bars will travel across the screen, but the green bars will not come. The screen looks dim and sits there, with the text of the copyright of Microsoft Corporation. So, after not having on the mound, I have to manually shut down the computer by holding down the power button. When I try to start again, told me to go through the Startup Repair tool. If I jump the repair, I just have to meet the same problem - a computer that will not go beyond the screen "green bar".

    So, I do the Startup Repair, and told me what I do for the restoration of the system. Windows starts normally after the restoration.

    Don't forget, this happens from a full stop. To remedy this, I just never completely shut down my computer. I left running and back just at the beginning of the day. The computer may start restart, it just may not start with a full stop.

    Given the start of repair takes, literally, around 4 or 5 hours of full stops complete, accidental or power outages are a nightmare, I am obliged to wait 5 hours to get access to the computer. Fortunately, I have my laptop.

    If someone has encountered this? I saw people talking about the loop of startup repair, but that's not the point, I have. I have yet to see any discussion of my specific problem.

    Thanks in advance!

    Hello

    4-5 hours to do a startup repair is too long.

    Often you get better results if you a using a DVD of Microsoft Vista startup repair.

    Jose how to do a startup repair, etc. using a DVD of Vista from Microsoft

    Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

    Here is the guide to repair Options using a Vista DVD from Microsoft.

    If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

    http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

    Table of contents

    1. Overview of Windows Vista repair options
    2. How to perform an automatic repair of Windows Vista using Startup Repair
    3. Advanced Tools Overview
    4. Conclusion

    If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

    Unfortunately, you have to buy it.

    Here is a link to it:

    http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

    See you soon.

  • INSTALL A PROGRAM DOES NOT START AUTOMATICALLY, IN VISTA WHERE THE COMMAND IS RUN?

    PROGRAM DISK DOES NOT START AUTOMATICALLY, IN MS VISTA WHERE THE COMMAND IS RUN OR HOW DO I INSTALL THE PROGRAM?

    Click Start > programs > Accessories > RUN.

    http://www.howtogeek.com/HOWTO/Windows-Vista/enable-run-command-on-Windows-Vista-Start-menu/

    Link above will help you.

    http://www.mydigitallife.info/2007/02/17/how-to-open-elevated-command-prompt-with-administrator-privileges-in-Windows-Vista/

    And this will interest you as well.

    See you soon. Mick Murphy - Microsoft partner

  • SRM does not start after you have moved the database

    We're under 4.1 SRM and moved its sql database to a new server sql (new server sql a different host name).  We moved successfully to the virtual center & Manager Update bases sql data, but after moving srm4.1 database, the srm service does not start...

    so far, I uninstalled SRM (DO NOT remove the SRM database)... After uninstalling SRM, I rebooted the server.  Then I have re-directed the SRM installation and started going through the installation of MRS... After pointing the SRM installed on the server vcenter, port 80, and pointing to an existing sql database, etc., I get a thumbnail of certificate message and a prompt on the creation of a new certificate, which i say 'yes' to... Installation continued on and arrived at the end when it says "create certificate"... then does not say "cannot install the certificate...". Database error has occurred. "At this point, the installation failed

    Any ideas on how to remove the old certificate or work around this error?

    Thank you

    I think the error message is misleading in this case and the problem is not related to the certificate.

    I still think that it is permission DB / configuration number.

    Following links may be useful:

    http://communities.VMware.com/thread/212157

    http:// http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1015883

    Michael.

  • Restore complete PC - either does not start or before restoration, said "the disk is defined as active in the BIOS is too small to recover the original system drive."

    I am trying to restore an image backup Vista 64 is 428 GB, the drive under restoration is a Velociraptor 2x300GB RAID 0 (about 558 GB under Windows), and the drive on which the image originated was is labeled as a 750 GB drive (actually about 698 GB / 433 GB used). When I first made the attempt I got some message on the target drive, have to be cleaned by diskpart, so I did. After that, I was able to complete the restoration - but after the restoration, at startup, I get the message:

    "Reboot and select proper boot device or insert boot media in selected bootable media and press a key.

    And under Windows, the drive does not appear. Disk Management displays the disk as unallocated space. So I added a new Simple Volume and then tried the new restoration. But now I get the message:

    "The drive is set as enabled in the BIOS is too small to recover the original system drive."

    Even if the restore completed successfully after cleaning, the drive is empty, and the player has more than 100 GB more space than the size of the image. After the restoration after the own, why can't it detect the boot sector; and if I try to restore after formatting, why do we say that the disc is too small? How can I successfully restore?

    Hello

    We can see the suggestion of Ryun on the link below and check if this helps solve the problem.

    http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/9a968d83-Ca5a-4a71-85e2-a013d209c713

    See also:

    http://TechNet.Microsoft.com/en-us/library/cc754015 (WS.10) .aspx

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Lightroom CC (2015) does not start under win 10 of the programme. The diagnostic program announces that Lightroom is not compatible. I have installed several times and disconnected. LR does not start. Program of liver, but it does not work. How can I fix

    Lightroom CC (2015) does not start under win 10 program.
    Program diagnosis announcement only Lightroom is not compatible. J’ai installed several times and disconnected. LR does not start. Hepatic program, but it does not work. How do I correct?

    CHETNA Hello!
    It works again! Thank you and have a nice day!
    Snowy greetings from Finnish Lapland.

    Thank you

    Veikko Hamara

  • Satellite M45: Windows XP does not start when you click on the user name

    I have a portable Satellite M45 in XP service pack 2.
    After starting the PC, he gets that windows journal under the screen, I click on connect my name and nothing happens.

    I have completely reinstalled the operating system, updated all drivers etc, and it was fine for one night.

    The next day, I'm back to square 1 and cannot log in again.
    It starts in safe mode, but I don't know how to start to solve the problem.

    Can someone advise please?
    Thank you

    It's very strange!
    Have you removed any spyware or Trojans?

    Question you is really, really strange, and I guess that the 'bad' software causes such problems...
    It seems that something changes that replaces Userinit.exe.

    A similar question has been described here in the MS knowledge base:
    http://support.Microsoft.com/kb/892893

    It seems that some registry have changed and that's why the connection does not work correctly!

  • Satellite Pro M70-113 does not start up - it hangs at the logo screen

    Hello

    I have a toshiba satellite pro m70-113.

    Sometimes when my laptop turns off mode standby automatically, due to inactivity and then if I press a key on the keyboard to wake up nothing happens and I have no other choice but to it stop completely by pressing the button for 5 seconds.
    But when I restart it works well, that is to say, it starts very well.

    But today, when it is in a similar situation, I restarted the laptop, the screen move after the logo screen toshiba. I have the power on several times, but without success. It crashes just on screen toshiba logo.

    After a few restart I pressed ESC while restarting and the toshiba logo changed to the texts POST bios screen.
    And I found that the text will not go forward after having reached:
    Find disk 0:
    Maybe default feel HDD initialization...
    The captured image is here:
    http://img144.imageshack.us/img144/9986/image007sp2.jpg

    Note: this is a capture when, I don't know how the system has just begun works very well and can be seen that the HARD drive is detected normally this time. While the earlier version, it will not proceed after having reached "Found Disk 0:

    So, the problem is that at the time of the problem, the hard drive was not read / initialized or something like that.

    And I remember that when I tried to reboot my laptop and it did not work. It was running on battery and when I switched power supply that worked.

    So it is a problem that has been fixed in a bet to update BIOS, but for another laptop (see laufendspass post) his link on this forum is here:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13143&MessageID=48143

    And my current bios version is 1.1 and an update is available for v1.30... (But I have not yet updated)

    Another problem I had met some time was same this post mentions to be corrected during the update of the bios.
    i.e. "corrected: a computer that is turned on to State power and running on battery power, may crash if the user is connected to the AC adapter while it is start.»

    So, for this, all mean that these problems can be solved by an update of the bios v1.30 which is available for my Satellite m70-113?

    Please answer.

    Hi Ashish,

    The fact that the initial POST process cannot access your hard disk suggests you that there is a possible problem with the drive, maybe he is not in place correctly when power is applied to it. The contents of the disc should be OK, then I suggest you take a good backup of your system (or at least your personal data) If you manage to get your notebook to boot successfully.

    I do not think that an update of the BIOS will affect any on that since the problem does not seem to have a certain 'trigger', and if the BIOS cannot access the hard disk then no matter what version of BIOS you are using.

    Kind regards

Maybe you are looking for