Does not start satellite C50-A-1E2

Hello
When press the power button / the notebook does not start. The screen is black, the fan is running and waving up and down. After 10 to 30 minute wait to start the laptop is well until next time. The laptop is not old, bought about 15 months ago. Nothing has changed, no BIOS changed also. The only change is Windows 10. Any ideas?

Remove the battery and try to start with the power supply only.

Tags: Toshiba

Similar Questions

  • Does not start Satellite A200 - checksum of the header file is possibly corrupted

    Does my Toshiba Satellite A200 on Vista.

    The following message appears on the screen: "the file is maybe damaged. The checksum of the file header does not match the checksum calculated.

    I tried reinstall drive, but it does not solve the problem.
    The following message is displayed: status: = xc0000428 (as well as instructions that do not seem to help at all).

    What can I do?

    Hello

    You mean that the new installation of operating system using Toshiba Recovery disk didn't?
    Hmmm, in this case, it seems like a RAM problem

    I searched a bit on the net about this error and found some info that might be linked to the faulty RAM memory.

    You should try to verify if a single one single module of RAM is affected.
    Otherwise you need to replace the two modules and then should try reinstalling the operating system.

    Welcome them

  • Created recovery disc is ok, but does not start Satellite A300

    Hello
    as the title suggests, the disks fail to start, details below formatted for reading easier (I hope :))

    -All-new series Toshiba A300
    -J' have created a disk of restoration with the toshiba utility, there was no error, the files are there but the drive seems to be unbootable.
    -This happens with both attempts, I made, using Verbatim r and Sony + R media.
    -The recovery disks will NOT start on my desktop system either.
    -L' laptop starts fine with a couple of distributions Linux on CD - R.
    -J' use F12 to tell the laptop to boot from the DVD.
    -J' have much experience dealing with the LiveCD, bootable disc burning, etc., so I'm inclined to think there is a problem with the toshiba utility.

    Any help will be much appreciated. Thanks in advance.

    Hello

    There is certainly nothing wrong with the Toshiba Recovery Disk Creator.
    I burned the recovery disc too. Once it failed because I did not use fully compatible DVD. Then I tested it with TDK - R and everything went well.
    No errors, nothing. Finally, I booted from the DVD and could reinstall the OS too.

    I presume that you should check the other DVD.

    Good bye

  • Windows does not start Satellite S50

    I can't seem to fix my Windows 10 or reinstall it. I tried to do an image ISO Windows 10 in a USB flash key or enter the toshiba HDD erase mode.

    Can someone help me?

    Here are the details: satellite s50

    I press 0 + power button to enter the recovery mode and the black screen with the TOSHIBA logo appears and down: Please wait. Then a black screen and it freezes (nothing happens more than 20 minutes). What else can I try?

    Thank you

    If the recovery of HARD drive and install USB Win10 both fail, it could be a hardware failure.
    You may need to send the laptop to a Toshiba repair for repair center.

  • Satellite A205-S5804 does not start.

    My computer does not start Satellite A205-S5804.
    It does not work in safe mode, and it will not work with the system restore.

    It stays black with a cursor, if anything.

    How to on my computer?

    Hello

    You have a cursor blinking in the upper left corner?
    In this case, you should check the disk HARD has been recognized by the BIOS.

    If the HARD drive is listed in the BIOS then I would recommend checking the HARD drive using s drive fitness test:
    http://www.HitachiGST.com/HDD/support/download.htm

    To run the test of fitness of s by car, you must download the appropriate creator or image and create a support of auto-start.

    Check it!

  • C50-A0113 satellite does not start in windows

    Hello.

    I have a toshiba satellite laptop C50-A0113 8 64-bit windows running.

    Ive had exactly two years a few days ago I restarted and then when it starts up, it stops at the screen "Toshiba leading innovation" and then he said: scanning and repair drive C, while on this screen it starts the process and then stops at 34%.

    It was two days ago now it just gets stuck on the "screen toshiba innovation leader" and then after a few minutes, it says preparation auto repair.

    Then he leaves the screen and goes to a screen black for a few minutes then flashes the blue screen written "your computer has encountered a problem" then restarts.

    I tried to create a bootable windows disc 8 in order to repair, but it does not start even in the usb port.
    I restart and press f12 to select the media to begin. It checks the media goes to the toshiba screen, then everything goes black for a few minutes until what it restarts.

    Can I please know what is the problem and how can I possibly fix it because the problem is clearly not my hard drive.

    I have removed and put into another laptop and it was fine

    Hello

    If you want to start Notepad using external media (such as a CD or USB flash memory key) you must disable the secure in the BIOS boot option.

    If you want to install Win 7, you must also pass the CSM mode UEFI Boot Mode.

    For me it of not quite clear if you created the recovery media (flash memory stick or disk)

    If you created one in the past, you could use this recovery media to put the laptop back to factory settings.

    In the case where this is not possible, some of the material (perhaps HDD) could be affected.

  • My C50 - B Satellite does not start from the HARD drive

    Details of the machine: -.

    Model number: PSCMLA-03F07Q
    Serial number: XE343127P

    Computer does not start from hard drive. No error message, just the start Toshiba at the end of self-test screen.

    Sometimes a reinstall of the operating system seems to correct the problem, but then he would go again, now the problem is consistent.

    I reduced the possibilities to a fault of BIOS, reasons.

    System boots from USB with no problems. Installation of operating systems is done without error. SMART hard drive data indicates a perfectly healthy hard drive. Memcheck will return no error.

    The obvious solution is to reload the BIOS, just reset it doesn't help. But that is the problem.

    1.4 BIOS update that the Australian site offers is a Windows program and the computer cannot start Windows.

    Obvious answer is to use a bootable USB key with an operating system 'live' on this issue, but all of these systems are Linux and the update of the BIOS is a Windows program. So much for smart solutions.

    Downloaded Bios version 1.7 of the European site but the iso inside the rar file is empty, 25 MB in size but nothing in there according to Linux. Tried to run his program on a Win7 64 bit computer and it returns an error that it could not find the correct iso file.

    I submitted a support request by email to Toshiba, but they believe that it could take three days to get a response, so I thought I would ask here as well. Can someone tell me please to a working copy of the latest BIOS update disk for a laptop Satelite C50 - B? Note: this model does not have a CD player so iso should be compatible with USB boot.

    See you soon,.

    Andrew.

    Hello

    From my experience that I n think that BIOS update is the final solution for you. When you set the default settings of the BIOS disk HARD appears correctly in the BIOS settings?
    HARD drive is also offered and listed as boot device when you enter in the start using F12 at startup menu?

    What happens when you start using recovery image installation created recovery USB key (I hope that you have created a)?

    Offer BIOS updates are versions of WIN and can be performed by running the Windows operating system.

  • Satellite A300 - rotates but does not start

    Hello

    I have a Satellite A300. I had several probems for the boot since 2 months ago: when I want to turn on my laptop, it turns on but the screen keeps black and it does not load the screen "Toshiba Leading Innovation". 'Satellite' (to the left of the mouse) light is on (it would go only about a second then to start and then turn off) and it will turn off.

    I try again for so many times with all the possibilities: without battery, only with the power adapter, two, but it does not start. I don't know what I can do. I always Hibernate my laptop because I'm afraid of can not start it the next day.

    Could you help me? If she cares: I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.

    Thank you very much and sorry for my English written: S

    Diego

    Hey Buddy,

    > I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.
    Of course, it s always advisable using Toshiba original spare parts only, but if you notice the same problem with AC adapter only it s not related to the new battery.

    Just to make a better diagnosis: If you have connected an external monitor? The internal display is perhaps the problem and doesn't turn on and it would be useful if you are testing the situation and an external monitor.

    But this noise as a hardware problem serious and in this case, you can wait to contact an authorized service provider. Technicians professional diagnostic tools to make an accurate diagnosis and to Exchange defective equipment parts.

  • Satellite A200-1 body weight does not start

    Hello

    I have a Toshiba Satellite A200-1BW model that frooze all to use and would not start again.
    I have checked all the power drive options very well.

    I have the blue AC power led on and the orange light but pc does nothing. I tried to power up without battery with AC, but always the same question.
    No fans don't come on etheir. PC won't in the start-up phase, and nothing appears on the screen that is constantly empty.

    I don't get the HDD 200 GB startng so I swapped it for a work of identical spare but the pc still does not start.

    My only conclusions are that I have a dead motherboard or a power problem internal.

    Its the real frist problem I've had with this laptop so am just checking to see if anyone out there has had the same problem or knows all the patches, I have not tried.

    Yes, that sounds like a serious hardware failure.
    Looks like the motherboard, GPU, or another party on the mobo may be defective.

    What about RAM modules? Did you check both?
    Please do

    Otherwise if there s no RAM issues then you will need a professional technician help.
    At the moment I put t see any other solution you :(

  • Satellite C650 - Windows does not start correctly

    I have a Satellite C650, who does not start, when it lights there are two options, Startup Repair launch which leads to a black screen and mobile arrow, the screen remains like that until you turn it off the button stop (seriously ive left for about 10 hours). The other option is to start windows normally resulting in a blue screen and the laptop restarts itself.

    Help me please, make things worse I can't find the box that it came in which contains the guarantee and recovery disc

    Hey Buddy,

    You can start your laptop in safe mode? This means that if you press the F8 key before Windows starts and you choose Safe mode can you start Windows?

    If this isn't the case I think that it s something wrong with your Windows installation and that's why you need to use the Toshiba Recovery disk to restore to factory settings.

  • Satellite C55 - Has - 1 L 0 does not start in Windows 8

    Hey guys.
    I hope you can help me a bit.
    I have a Toshiba Satellite C55 - has - 1 L 0 here and it does not start in Windows 8.

    I turn it on, the Toshiba start screen appears, and then I get a message on a black screen saying "media control" (failure) and after a little while "no boot device. Please restart.

    I checked the BiOS and it does not see the hard drive (said HARD drive - no) and even in the boot order list, I don't get a list with the DVD drive with the exact name, but for the HARD drive.
    I tried to do a recocery with the F12 key and get the list to choosw where I want to start but by selecting the disk hard does not work.

    So I thought I'd try a live distribution of linux to see where is my hard drive and back up my data (after some settings in the BIOS - boot CMS mode) but I can't find there too. (I have a file fstab and mtab, it would help if I posted it here?)
    Is my HARD drive broken? Can I try something else?

    Thank you very much!

    You are right. This issue should be fixed by the authorized service provider.
    Furthermore, why do some risk steps to check this problem, if the warranty is valid.
    Warranty will cover the repair costs.

    Addresses and phone numbers, you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

    Good luck.

  • Satellite Pro A120 - does not start with 4 GB of memory

    Hi all

    I'm new here so please be gentle!

    I have a Satellite Pro A120, model No. PSACOE - 037014EN and you want to increase the memory 512 MB present. I tried 2 different sets of memory 4 GB (2x2gb), but the machine does not start. I tried the different modules together and on their own but still no joy.

    Where I'm going wrong? This model will not take 2 GB memory modules?

    Any advice will be appreciated.

    Best regards

    Dr. Feelgood

    Hello

    Before changing something about your hardware, please make sure that if the computer supports the new pieces of material and, therefore, you can also consult the user manual.

    Anyway, I checked this and this laptop can only be upgraded to 2 GB maximum. This means that you can use the module of 1 GB in each slot and * no * 2 GB in each slot.

    So please bring back the memory modules and buy 2x1GB. It will work.

  • TPSMain.exe does not start on Satellite U400 - 14 p PSU44E running Win XP

    Hello

    I installed Windows XP Pro SP3 on my U400 PSU44E - 14 p.
    I found all the drivers on the official website of Toshiba (thank you) but one in the origin of the problems: TPSMain.exe does not start when I start the computer.

    Once I type my password and login, I hear a typical Windows error sound, but no message is displayed. I noticed that when you try to start the Toshiba Power Saver utility from the Control Panel, I got an error message telling me that I have enough privileges to run this utility...

    I am the administrator!

    If you guys encountered the same problem and got a hint of trouble, feel free to post here. THX.

    I have a Toshiba Satellite U400 and I installed Win XP too.
    I have a user account administrator and Toshiba Power Saver works properly!
    No problem don't like on your system!

    However, in the Toshiba Power Saver Settings (installation options), you can find the option called limited allows the user to change the settings and allow different actions for each profile.

    Check that both are enabled!

    If this doesn't help then reinstalling again this tool.

  • Recovery does not start on Satellite P200D

    I have a satellite P200D and I need him back due to a virus.

    Now, I ordered the recovery media kit and when I want to start it it does not start. The manual said, put the DVD, restart the computer and press F12 when the massage "In Touch With tomorrow TOSHIBA" poster.

    The message is not shown in the configuration and the recovery does not start.
    When I press F12 at startup is also the recovery does'nt start.

    What I am doing wrong?

    How can I get my laptop back?
    Any ideas?

    Hello

    You must boot from the disc.
    This means that you will need to insert the disc, have to turn on the device, choose ODD as boot device and this will start the recovery process.

    Try this!

  • Satellite L40-139 does not start

    ? 19/02/2014 18:41 - edited? 19/02/2014-18:45

    Hello, I have a problem with the SATELLITE L40-139

    the thing is when I press the power button / stop, hard drive led will begin to Flash, CD-ROM led is lit and the screen is black. I noticed that advise in the CD-ROM makes a sound ICT in the same way the hdd led flashes (when it flashes I hear a tick form CD, yes I unfolded any computer laptop).

    I can only say that I have connected my PC HARD drive and it's working., good fan is not working too, but I think it will start, after some time (as he always did)

    Notebook crash circumstances are now saying: that a year ago, he fell from 1 inch (such height ;]) I saw that the ribbon cable connecting the touchpad to the mohterboard was broken and my diidn can't start computer, I thought that there's a problem, but I forgot and left the laptop for more than 9 months (with hard disassebled and battery and cd-rom drive) and then I decided to try to turn it on.
    And viola! It works it boots etc.

    After a month of being happy, I'm drunk I couldn't sit on the Chair and I decided to sleep with my laptop on the bed, I lied right down and put the laptop on my belly and it crashed (screen freezes) so I decided to reboot, but it does not start.

    Here is a video with what I get when turning the power on it: [http://www.youtube.com/watch?v=jC0pGBBVwJk] (not Fortunately my phone fell in the mud and shifts when I record videos)

    Some people suggest I should connect an external display to see if theres no picture but the result is always the same. (Screen not even fuels not on)

    Maybe someone could help me fix without sending it to the customer service.

    See you soon.

    On this virtual path, it is not easy to say what the problem is here. Of course, you can try to do some tests and try to make some conclusions which may be wrong. After his last stop somewhere I think that there is big problem with graphics card. Of course I can't say it for sure.

    Diagnosis just exact mainboard can offer answers. I m afraid mainboard is dead and must be exchanged.

Maybe you are looking for

  • WiFi problems on ios 9.3.5

    I am a user of the iPhone 6. After the upgrade to iOS 9.3.5 I am facing some problems serious wifi. I can connect to wifi only if I'm within the range of the meter. What someone with a similar problem? I tried to reset the network settings... But tha

  • List is no longer iMessages or text of the other phones in the message on my iMac and Macbook pro application

    I used to be able to send messages and receive texts on my computer from anyone, and now it does not work. iMessage works on and outside, but people on other systems do not get through.  So much easier to type on the laptop desktop computer sometimes

  • Atrix HD resets Widgets by lighting

    I had this problem the opportunity when it comes to restart my HD Atrix after data loss and trying to find it (tends to occur after disconnection from the WiFi for a reason any). In addition, it only affects my second screen (I use 2 monitors at home

  • Slow Internet Explorer 7 and 8__

    I had to completely reinstall my XP system that came with Internet Explorer 6.  Before moving to IE7 and IE8, IE6 was very fast, and it was very nice.  Now, with IE7 or IE8, it's so slow.  What can I do to speed up the process?  Microsoft Updates do

  • Delete 'test' for the splash screen

    I had problems with my pc. A service technician put windows 8.1 in "Test" mode. Who placed a 'Test' option on my screen. How can I remove it? Thank you, Rick.