Domain admin lost button restart after you fix a problem with temporary profile. Purely aesthetic issue.

Similar Questions

• How can I get VMs to automatically restart after you restart ESXi 4?

  How can I get the VMS to automatically restart after you restart ESXi 4?

  I read and read and try things such as VMware tools etc.  Never, it works on Windows and FreeBSD, tools or not.  What Miss me?

  Thank you!

  You can do in ESX configuration.

  Select ESX / Configuration / VM StartupShutodown

  Activate (default is disable) and select the boot order.

  I also suggest to stop the comments on the same menu.

  André

• Install KB3024777 to fix a problem with KB3004394 on Windows 7 and Windows Server 2008 R2 now not authentic

  Separated from this thread.

  Joachim

  When first pose the problem? Was it before or after the December updates?

  KB3004394 and KB3024777 appear in view update history? Or do they appear in installed updates?

  Gerry, thanks for your post. I have the same problem as Joachim started this thread. I am running Windows 7 sp1. I have a Dell computer and it's certainly a legitimate copy of Windows (confirmed computer 'properties' and it is enabled).

  By your post, I saw just to update and the KB3004394 (installed on 12/10/2014) and KB3024777 (installed on 12/12/2014) show as comfortable. I usually leave the Windows download updates automatically and I install them to stop. I watched the second update and according to Microsoft.com:

  Install KB3024777 to fix a problem with KB3004394 on Windows 7 and Windows Server 2008 R2

  The KB 3004394 update which was dated December 10, 2014 can cause additional problems on computers that run Windows 7 Service Pack 1 (SP1) and Windows Server 2008 R2 SP1. This includes the inability to install future updates. This new update is available to remove KB 3004394 from your computer.

  My problem is, as of today 14/12/2014, I still get the pop up "this computer is running not windows genuine', even with KB3024777 installed.

  Any thoughts?

  Thank you

  Bob C

  Right-click on CMD

  Click on run as administrator

  At the command prompt, type the following commands:

  slmgr.vbs - ipk xxxx-xxxx-xxxx-xxxx (to replace the specified in the current product key)

  xxxx-xxxx-xxxx-xxxx - represents your product key

  Press enter on your keyboard

  Then type: slmgr.vbs - ato (this will force the activation)

  Leave the command prompt

  Restart your computer

• How can I fix a problem with AlerteGPS_G520

  Hello here is my question...

  How can I fix a problem with AlerteGPS_G520

  Hello
  I suggest you contact the manufacturer of the product.
  Be sure to provide all the details.
  b Eddie

• AI CS5 keyboard shortcuts do not work. I restarted and have no other problem with my MacBook Pro. What is the problem?

  AI CS5 keyboard shortcuts do not work. I restarted and have no other problem with my MacBook Pro. What is the problem?

  Bill,

  The following is a general list of things, try when the question is not in a specific file, and when it is not caused by problems with opening a file from external media. You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) (check the box to delete the preferences), run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) to uninstall and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• How can you check if you have a problem with the ghost attack

  How can you check if you have a problem with the ghost attack.

  My ISP (Virgin) sent me a letter saying I could have an attack on my apps by the phantom virus.

  How is this true and what can do

  The XcodeGhost malware affects the apps, mainly Chinese, created using a red version of Xcode.  It is not a 'virus '.  (Look at the difference between computer viruses and malware).  Remove the Apple listed here and get updated with the latest versions of the App Store.

• I just wanted to know at all, if you encounter a problem with the update of creative cloud as if I was (error 1001), I discovered that my Webroot AntiVirus has been the origin of the problem. I turned it off and it updated correctly. Hope that helps some

  I just wanted to know at all, if you encounter a problem with the update of creative cloud as if I was (error 1001), I discovered that my Webroot AntiVirus has been the origin of the problem. I turned it off and it updated correctly. Hope that helps some people I've seen so angry about it here by searching for the answer myself.

  Thanks for sharing this, yes turning Firewall works.

  Concerning

  Stéphane

• Lost bootcamp partition after you use diskutil to resize

  Hello

  I was little Yosemite when I resized (shrunk) my partition apple to increase the size of my bootcamp partition using disk utility. I studied the problem and understand the limits of partition are not correct on my bootcamp partition.  Using this thread as my main guide

  https://discussions.Apple.com/thread/6465316?TSTART=0

  I went through the steps and got the boot to a read error trying to start on the bootcamp partition.

  In osx, disk utility displays the bootcamp partition, but it is always grayed out and right-click to mount displays an error when you try to mount.  I understand it, conceptually, what I do, but I don't know enough details to understand what I'm doing wrong.  Here is information and links to screenshots of error messages, etc.   I would greatly appreciate any idea. Former Republic Yugoslav, the machine is a retina MBP 15 "with a 500g SSD

  This link will show you the screenhots of the controls required for the diagnosis.

  http://www.lewallens.com/2016/03/lost-bootdisk-info.html

  In addition, I had bootcamp windows installation USB key that I was going to start, from the discussions around the read error.  I couldn't accomplish that, as when started the USB, the display depending on whether you get after you choose the language and keyboard is not the screen where you can choose the Startup Repair, but the first screen of the windows installation.  Interestingly, with the same USB stick plugged into a mac mini without bootcamp partition, boot/repair screen comes up

  Thanks in advance.

  Ric Lewallen

  the discussions I've read:

  http://Apple.StackExchange.com/questions/180352/Bootcamp-wont-start-after-resizi ng-partition

  https://discussions.Apple.com/message/29341803#29341803

  https://discussions.Apple.com/thread/7095970?start=0 & tstart = 0

  https://discussions.Apple.com/message/29341803#29341803

  https://discussions.Apple.com/thread/6705161?start=0 & tstart = 0

  This article may help:

  How to resize my bootcamp partition without deleting chtol

  However, according to Apple, you may use any software other than Boot Camp to resize the partition.

  Boot Camp: resize the Windows partition (told to uninstall Windows and resize all reinstall)

  Boot Camp: install Windows on your Mac (also indicates that you can not resize the partition once Windows is installed)

  In addition, Windows and Mac OS X must be backed up separately. Time Machine does not back up windows partition, so if you ever have a problem and the need to restore your computer, you would lose the Windows files.

• After you fix "validating identity", then it turns to "limited or no connectivity" problem.

  Pls HELP!

  I read the posts here.  At the beginning, my problem is 'validation of identity '.  "Then I try the recommendation here and uncheck enable IEEE.  It works and ask me a network key.  But he turns to "limited or no connectivity."
  I try to restart it and unplug my modem, still not work.  So I try the recommendations here type actions 'cmd '.  No work.  The I uncheck "use windows for configuration..." ».  Then cannot find available wireless networks!
  Ther, s no problem with the wireless network itself such that it works very well with my other computer and iPAD.
  This disorder problem as me for a week and I still can't find a solution!
  Pls HEP...

  Hi Sharebecca,

  You can follow this link & check if the problem persists:

  You receive a message "Limited or no connectivity" on a computer that is connected to the Internet by a DSL modem or a modem cable after installing Windows XP Service Pack 2

  
  Reference: in Windows wireless network connection problems

  Hope the helps of information.

• I tried to make a donation, the entered personal information & visa # & lost the page after you read the privacy policy... what happened to my visa #?

  I worry about my cc # was hanging out in the bowels of mozilla... Why is it necessary?

  Thank you for showing a big heart above us,
  and do not worry about any problem with your visa. Only two things would happen.
  1. every donation made.
  2 don failed, or
  but you don't have to worry about your visa

• What to do with the old user profile after you have created a new user profile

  original title: new user profile

  I was told my user profile is corrupted and create a new one, if I do this is it recommended to give up and delete the old? Or simply use the new profile for the intended use of the new?

  Hello

  They are similar, if not the same, as your question then use these methods to correct problems
  with the account or migrate to another (explained in the last link however you please, don't skip the)
  other measures to start).

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• results after you start the netbook with the bootable usb key

  do you do after you make the bootable USB key and start your netbook and just windows 7 Professional can't choke and it want let me to upgrade or to perform a custom installation?  & What drivers should I install?

  If you want to upgrade your Netbook Windows 7 Starter to Windows 7 Professional, you must use the upgrade wizard Express Windows as well as the key to Windows 7 Professional.

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade from Windows 7 Starter to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation).

  Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

• How can you fix the problems of bandwidth?

  I created a file in Flash CS4 and all runs smoothly when I test the movie in Flash. However, now that I downloaded the html test on our Web site, it works and gets stuck in some places very long and ends by spread. I used the bandwidth Profiler and see there are a few images that exceed beyond the red line, causing a delay. What should I do to enter and fix the problem so that the gray bar falls below the red line? I'm relatively new to Flash so any advice would be greatly appreciated!

  Add the following code to frame 1:

  var tl:MovieClip =;

  TL. Stop();

  {tl.onEnterFrame = function ()}

  {if (this.getBytesLoaded () > = This.getBytesTotal ())}

  delete this.onEnterFrame;

  TL. Play();

  }

  }

• When Apple will fix the problem with 9.3?

  Since IOS 9.3 was just downloaded (night of 26 March) and not yet installed, my iPad (Wifi and boxes) Air did not work properly:

  By clicking on a link in GMAIL or AOL emails causes the iPad to freeze.

  Safari does not work.

  Chrome does not.

  When I tried to install the update already downloaded 9.3, the installation did not check because I was "not connected to the internet."

  On Monday, March 28, I noticed many others had similar problems with 9.3, and I tried the recommended fixes:

  Disable Java Script

  Remove Booking.com

  Delete web browsing data

  Restart the iPad.

  None of these bugs worked.

  Tuesday morning, March 29, the Update 9.3 installed correctly, but none of the symptoms have been set.

  I refuse to downgrade to a version 9.2 based on serious disadvantages noticed by others who have tried it.  Besides, why should I do an Apple problem be my problem?

  When will this problem be resolved?

  MJSF wrote:

  When will this problem be resolved?

  No one here works for Apple (and anyone who works for Apple would be bound by an NDA), there is no way to answer this question. You will have to just be patient.

  The update that was released was for something different and more critical.

• HP Support Assistant unable to fix a problem with the CD/DVD not detected

  I have a G42-415DX laptop and I can not read cd/DVD, it was working fine 3 weeks ago and now nothing / I tried the support assistant and he could not solve the problem.  I got a message saying the driver must be reinstalled, how do I reinstall the driver?

  Hello

  If you do not get the chance to use another PC, I would definitely create the CD and the DVD bootable as it would give a clear indication if there is a hardware problem with the optical drive.

  In the meantime, try following the procedure in the title of the subheading "Let me fix it myself" on the link below to remove upper and lower filters (if these registry keys exist) and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  If find you the following registry keys and delete them, restart the laptop before checking the disc.

  Kind regards
   
  DP - K