Don't boot to desktop-Boot computer ups always come with "no input signal" for monitor

Similar Questions

• XP don't boot-computer did not come with the XP CD

  XP boot not - need XP Recovery CD, but it came pre-loaded on my computer, w/no CD.  Any suggestions?

  Use the XP Recovery Console to check the file system on your drive HARD and correct all problems of integrity of system files caused by problems of power supply interruption and then try to start your system - this may be all you need to do to get your system running.
  Boot into the Recovery Console Windows using an XP bootable installation CD.
  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.
  This is not the same as recovery disks that may have come to a store to purchase the system.
  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.
  The ISO bootable image file you need to download is called:
  xp_rec_con. ISO
  Download the ISO from here:
  http://www.mediafire.com/?ueyyzfymmig
  Use this free and easy program to create your bootable CD:
  http://www.ImgBurn.com/
  Here are some instructions for ImgBurn:
  http://Forum.ImgBurn.com/index.php
  ? showtopic = 61
  It would be a good idea to test your bootable CD on a computer running.
  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are
  done before Windows tries to load.  If you miss it, you will need to restart the system again.
  When you start on the CD, follow the instructions:
  Press any key to boot from CD...
  Installing Windows... going to pronounce.
  Press 'R' to enter the Recovery Console.
  Select the installation that you want to access (usually 1: C:\WINDOWS)
  You may be asked to enter the password (usually empty).
  You should be in the folder C:\WINDOWS.  It's the same thing you see in the Explorer folder C:\WINDOWS.
  RC allows commands the base - copy, rename, replace, delete file, chkdsk, fixboot, fixmbr, cd, etc.
  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.
  Running chkdsk is very well run even if she can't find any problems.
  Assuming your boot drive is C, run the following command:
  CHKDSK C: /r
  Let chkdsk finish to correct the problems, he could find.  It may take a long time to complete or seem to be 'glued '.  Be patient.  If the HARD drive light flashes, it's something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.
  You must run chkdsk/r again until it finds no error to correct.
  Remove the CD, and then type "exit" to exit the RC and restart the computer.
  You have not to set the BIOS to boot the disk HARD since the CD won't be.
  Once finished the chkdsk/r, see if your system boots.  If this is not the case, to do this:
  The next time that your system has rebooted, start tapping the F8 key until you see the menu Boot Options Advanced XP.  On the Advanced Boot Options menu, select:

  Disable the automatic restart in the event of system failure

  This will display the error message that you don't see when the system restarts.  This is what Windows is supposed to do when there a failure - it is supposed to automatically restart.  The error you see on the screen has your clues...

  If you do not see the menu Options start Advancded or you do not have to turn it off automatic restart on option system in the list of choices, you need to try again until you do.  Start typing the F8 key earlier and more frequently as your system begins to come alive.  If you miss the window of opportunity F8, you must try again.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• My computer did not come with a Windows XP restore disk

  My computer did not come with a restore Windows XP disc and I don't know how to get one, because my computer keeps restarting itself and that goes, "your computer must was closed incorrectly, or because of a power failure" and he gives me 3 options of safe mode and then gives me the opportunity to go to windows normally... but all the options I chose... It keeps just restarting on me... My computer did not come with a restore disc and Idk anyone who owns one... then where would I go to get one?

  Some computers have a built-in hard disk recovery partition.  Search for information on this subject on the BIOS screen that appears the first thing when the computer starts.  By pressing Ctrl + F11, accesses a recovery on some Dells partition.

  Otherwise, contact the computer manufacturer and ask if they can provide a restore disc.

• Reinstall Windows XP on Acer Aspire One - computer did not come with a recovery CD

  How to use the product key that came with my Acer Aspire one to reinstall Windows XP without CD?

  Hi MariaMouzes

  You can restore your computer configuration using the procedure described in the link below.

  How can I restore my system using eRecovery management program?

  http://Acer.custhelp.com/app/answers/detail/A_ID/12869

  Or you can buy the recovery media by hint at the link below.

  https://store.Acer.com/store/Acerna/DisplayDataValidationServicePage

  Good luck.

• How to install basic computer games that come with all computers

  How to install basic games that come with all computers

  If you are referring to the integrated Microsoft games in Microsoft Windows Vista (Chess Titans, Solitaire, FreeCell, etc.), then they can be disabled. To activate:

  1. click on Start (lower-left) and then on Control Panel.

  2. click on programs and features.

  3. on the left side of the screen, click on 'Windows turn features on or off".

  4. find the entry called games & check the box next to it.

  5. click on OK.

  6 reset.

  If the games box is already checked, uncheck the box , click OK, restart, then do steps 1-6 above.

  See also:

  http://windows.microsoft.com/en-us/windows-vista/Learn-about-Windows-games .

• How come my computer did not come with windows 7 reinstall discs

  Why are'nt windows 7 reinstall disks sent with new computers?

  Save $ 10,

  Contact them and get a.

  There was a class action against Acer for this same reason,

  Do not provide a recovery disk which had Vista on it,

  They had a partition from the factory, but it is not good enough.

• I have tray to install itunes on my computer, but always get error. My computer is dell xps. I have several times but no work of tray. Need help.

  Plateau following apple troubleshouting but nothing works for me. some time is not in the computer

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you with your question in Forum Vista programs at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• When I boot computer I get this message... Remove the c:/System Volume Information directory. EFaDATA\SYMEFA. DB-log is corrupted and unreadable

  Original title: damaged and unreadable

  When I boot computer I get this message... Remove the c:/System Volume Information directory. EFaDATA\SYMEFA. DB-Journal is damaged and unreadable... How to fix this?

  Thank you very much for your help.
  I discovered the new external hard drive was the problem. Formatted as NTFS seems to be a problem so I reformatted to FAT and the problem disappeared.
  The error message was: the journal of System Volume Information EfaData SYMFA DB file or directory is corrupted and unreadable.

  Thanks again.

• Upgrade Windows 7 Home/Windows 10 Pro Dual boot computer CPU

  I plan on upgrading my CPU to a core of an I5 Quad model, dual Pentium G630. The card mother won't be replaced as it can accommodate a socket LGA-1155. I can also be tempted to replace my current system with a 250 GB SSD drive. It is a dual-boot computer that used to have two installations of Windows 7: it was OEM that came pre-installed, when the computer was purchased, and the other was a retail version. The OEM version updated to win Pro 8, then Win 8.1.1 and finally Windows 10 Pro.

  I would wait for activation or problems that this will be a smooth operation?

  If so, what might be the complications?

  Thanks for the tips

  Hello

  If you face any problem of activation on Windows 10 you can see the WIKI article mentioned below and see if it helps.

  How to troubleshoot Product Activation Windows 10

  Keep us.

  Kind regards

• Install Windows 7 Professional 32 bit - on a 64-bit of Windows 8 for dual boot computer

  Is this possible?

  When I get to the part where the installation is asking me to select a partition, it indicates that the drive must be in NTFS format. Windows 8 says that they are formatted in NTFS.

  No idea why I get this error?

  Help for this type of installation would be useful, including assistance to the implementation of a dual boot.

  Thank you

  The Windows 7 installation disc is maybe damaged. Download Windows 7 proper. ISO file that includes Service Pack 1
  (Note: must match for your product key version)

  Windows 7 Professional 32 bit: http://MSFT.digitalrivercontent.NET/win/X17-59183.ISO
  Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso

  After downloading the file correct .iso using ImgBurn or ISO gear to burn a bootable DVD.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
  Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
  (Les étapes sont les mêmes pour Windows 7 ou Windows 8), except that you do not create a repair disk but complete an installation DVD)

  Note: Always use high quality DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

  ====================== Keyless Install ================================

  How to make a 'Keyless Install"of Windows:

  Boot from the Windows 7 DVD disc, you create and launch the installation.

  After you have entered the user name and password that you will be asked:
  "Type your Windows product key", do not enter a key.
  Also located just below the box where you enter the key is a box with a check mark
  to "Automatically activate Windows when I'm online", remove the check box and click "next".

  You now have a 30-day grace period to activate Windows.

  During this 30-day grace period you can try to solve your problems.
  After you are satisfied with all the problems have been resovled then activate Windows.

  ====================== Device Drivers ===============================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  = Run Windows Update =.

  Install the 'Important' updates that are available. Make a small group of updates at the same time (max 10)

  Reboot if you are prompted, save updates .NET Framework to the end.

  = How to activate Windows 7 by Internet =.

  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method - to reach a real person:
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Worldwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com

• flashing desktop iMac computer

  10.11.6 OSx
  iMac 24 inch mid-2007
  ATI Radeon HD 2600 Pro 256 MB

  This afternoon there was a close call of thunder/lightning. I didn't know the brief storm coming, but the computer worked always fine afterwards. I stopped it immediately.

  Flashes when I restarted the desktop computer. Nothing I've done has stopped - mainly just restart and run Disk Doctor (for lack of other ideas).

  Windows Flash not, than the office. I can't up the launch bar and I can't change between desktops and split screen does not work.

  Any ideas please?

  Repair the disk for El Capitan

  1. Restart the computer and after the chime hold down the command and R until the Utility Menu appears.
  2. Disk utility and click on the continue button.
  3. Then select layouts withdrawal (usually Macintosh HD) entry of the volume of the list to one side.
  4. Click the first aid tab on the toolbar and wait for the fact button to activate. Click it, and then quit disk utility.
  5. Select restart from the Apple menu.

  If the above does not help, then follow these steps:

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume of the list to one side.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

• New Hp laptop comes with 4 primary partitions. How do I creat more than I can duel boot

  New Hp laptop comes with 4 primary partitions. They are system, OS (C drive), recovery and HP tools > how do I create a new partition so that I can duel boot withour causing the entire disk pass the dynamic that would get me no where?

  If you change something, it may invalidate your warranty. If you need to return your laptop to HP, they will just wipe the drive and start over, no questions asked.

  You must remove the HP tools or the recovery partition. I think that removing the partition on an HP tools automatically goes to sleep you out of the recovery partition.

  If you delete the recovery partition, you must make sure that you have done the set HP recovery disk and it is on quality discs and safely set aside.

  If you are planning on dual booting with different versions of Windows, make sure that Windows utility block each other. For example, don't let Windows defrag loose on the other OS partition.

• Install Adobe illustrator cc 2014 and I don't have the desktop icons when I save my work on my desk

  I installed Adobe illustrator cc 2014 and I don't no the desktop icons when I save my work to my counter top.  I have a white square and the name of the file and that's it.  What's wrong?  I have no other illustrator programs on my computer.

  File associations are managed by your operating system and without any specific system info we can not tell you anything.

  Mylenium

• I use 4 windows with multiple tabs, but I 'don't know why one of them (window) always close when I restar computer

  I use 4 windows with multiple tabs, but I 'don't know why one of them (window) always close when I restar computer

  Hello, by default the firefox session restore feature only allows you to save last 3 windows open. to change this, type on: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named browser.sessionstore.max_windows_undo. Double-click it and change its value to 4 (or more).

  http://KB.mozillazine.org/browser.sessionstore.max_windows_undo

• Boot CD-ROM free-Com

  I have the CD drive on Free-Com with a card PCMCIA (PCcard). I want to boot from my CD to repair. The boot process is OK. But the CD drive letter has not been assigned. Virtually all the drivers CD back may not find this CD.
  Yes, where I can find the BACK of the device drivers?

  HELLO Mr. Smith,

  When you go to http://eu.computers.toshiba-europe.com - Support & Download - Download driver, you might find for your Portege 3410 (W98SE) a companion disk.

  This disc is also a startup disk and is responsible for detecting the external CD ROM!

  Another suggestion is to go directly to the homepage freecom.de and search for a driver or a boot disk!

  Sammy Bye

  Post edited by: Sammy23