Don't flag of 1720 (Vista) no start

Similar Questions

• Satellite X 200 - 21 l: how Windows Vista hot start work?

  Hello

  Does anyone know how hot Windows begin to work on Toshiba x 200-21 l?
  I can not configure it - and I don't know if it works on my laptop.

  Sven G

  Hello

  > I cannot configure it - and I don't know if it works on my laptop.
  I read about the Vista Hot start feature and it seems that the laptop manufacturers set up this hot start.
  Warm startup is related to multimedia keys Toshiba which lies at the top of the keyboard.
  To my knowledge, these buttons are already configured.

• Remove windows vista without starting the operating system

  Hello! IAM using windows vista. Lately, I just figured that the computer has the virus iam so think upgrade to windows7 and I want to remove vista first. Is it possible to remove vista without starting? Sombody help please! Thank you!

  Hello

  1. you must have an operating system to be upgraded; in your case vista

  You cannot delete vista

  2. an upgrade is performed from an operating system of windows in your vista case, unless microsoft advises otherwise; does not apply in your case

  solve your problem of malware or clean reinstall vista 1st - then upgrade

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  ____________________________________________________

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  ___________________________________________________

  information about windows 7

  It depends on if the manufacturer of your computer/laptop has windows 7 drivers available for him as to if it will work properly

  check with them

  and read this

  Windows 7 upgrade advisor

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows 7 system requirements

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 upgrade paths

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  _____________________________________________________________

  and the link below is to an instance of installation of Windows 7 for any other questions about the installation of Windows 7

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

• I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  Hello

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Vista cannot start because of accidentally deleted system files

  Hello

  my laptop was working very well until some files were accidentally deleted and now Vista cannot start.
  There is a message saying that I need to contact the system administrator or the manufacturer of the pc.

  Is there anything you could recommend?
  I would appreciate if you could help me find a way to record all of the information contained in hard drives.

  see you soon

  If you are not able to boot up the laptop and refuse it to Vista to start then take recovery in hand, insert it and start on this CD from Toshiba.

  Then the cell phone should boot from the recovery CD and reinstall the whole OS again.
  This should help, but the HARD drive will be formatted.

• When you play FarmVille, my computer crashes or I get a notice that "bits have been lost" and refresh the page... usually don't work and I have to start all over again.

  When you play FarmVille, my computer crashes or I get a notice that "bits have been lost" and refresh the page... usually don't work and I have to start all over again.

  I think that there is a prob with this game, it does not matter if you use firefox or IE. Or another browser. It blocks something. Or causes probs.

  FB needs to fix it. There are a lot of people (in a Google search), who are having probs. One way or the other

• Desktop Windows vista always starts in safe mode

  Why windows vista always starts in safe mode?

  Hello

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig
  4. Then press enter on your keyboard.
  5. The System Configuration utility opens
  6. Make sure that Start Selection is set for Normal start.
  7. Click the Startup tab.
  8. Make sure you start is not checked
  9. Press the apply button and then press the OK button.
  10. Click the restart button to restart your computer.

  See you soon.

• Where can I find a copy of the Windows Vista Quick Start Guide provided with the retail version of Windows Vista?

  Where can I find a copy of the Windows Vista Quick Start Guide provided with the retail version of Windows Vista?

  I need the Guide quick start, as I have lost mine. A copy of the paper, as in a PDF file or similar.

  Hello

  You can check this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/products/home

• 2 months old Inspiron 1720 (Vista Ultimate) - No. Audio except the system beeps

  First, let me preface this by saying that I'm certainly not a novice computer user.  I am a software engineer and have worked with Vista systems for more than a year.  All of a sudden a few days ago, I noticed my audio stopped working on my 2 months, Inspiron 1720 (Windows Vista Ultimate Edition and SigmaTel High Definition Audio CODEC).  When I try to manually start the service Windows Audio from the Service Control Manager it says "Windows didn't start the Windows Audio service on Local computer."  Error 1068: the dependency service or group could start. "I then try to start the dependent service MMCSS and get manually:"Windows could not start the MMCSS service on Local computer.  «Error 193: 0xc1»  Look in the event viewer under Windows Logs--> system, I see an error message: "the MMCSS service terminated with the following error: MMCSS is not a valid Win32 application."

  I first tried to download the latest audio driver from the Dell website and reinstall the driver.   When it does work, I called Dell and spent the afternoon with them trying to use the system restore to load several different restore points, eventually go all the way back to the original restore point (2 months ago).  None of the restore points will not load successfully.  Dell said it's a software problem and perhaps a trampled on their "QuickSet" application and recommended Microsoft Update I download the latest driver for QuickSet and reinstall.  I did this and still no sound.

  Looking for MSDN and Google I stumbled upon a few elements that mention a Windows Update (1 of 3 pre-Vista SP1 update pushed last week) that caused a few problems and was later fired by Microsoft (see http://support.microsoft.com/kb/937287 and http://www.news.com/Microsoft-pulls-Vista-SP1-update/2100-1016_3-6231299.html?tag=ne.fd.mnbc).

  Given that, I looked at my history of update and, of course, the 937287 update has been installed on 15-02-08 (which always is my audio stopped working).  However, this update cannot be removed.

  At this point I don't know if the problem is with the update of Microsoft or something else and am running out of ideas to solve this without reloading the original image and lose all my data.

  
  

• Satellite L350-14F - Vista cannot start the Realtek RTL8101e WLAN

  Dear readers

  I'm Dutch, if my English is not very good, so my apologies for that but I have a big problem.

  My Toshiba Satellite L350-14F with Realtek RTL8101E family PCI-E fast ethernet NIC (NDIC6.0 with Vista OS) cannot establish a connection with the outside world...
  I tried many drivers, but all do not work... I can't find any other driver. So I guess there must be something else on the computer...

  I reinstalled my computer while going to format all my hard drive and I have no CD of drivers for the laptop.
  When I got a _wired_ connection, Vista can try solve the problem itself. He found a driver and then I am redirected to a site of toshiba... Where to download a driver from East. I start the download and installation, but then the installation says that I don't have a correct serial number...

  All this me freaks out there... who can help me please?

  Greetings
  Roy

  PS: I checked my BIOS for strange things and one thing caught my attention on
  I have an option: Wake On LAN anti-piracy. And it is disabled
  BUT I can't change it to activate.

  Hello

  First of all, it would be interesting to know what you mean without link with the outside world
  The wireless network card is recognized correctly in the device (without yellow exclamation points) Manager?
  The router is visible on your computer?

  First of all, you must make sure that you use the latest WLAN driver on Toshiba website:
  http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

  Additionally, make sure that you have installed the latest version of BIOS that you can find on the site of Toshiba, too.

  You should check the WLAN Setup on your laptop and the router. Make sure you that you have disabled Vista of WLAN power save function. You can find this option in Vista Power Management.
  Make sure that you use the same standard WLAN on your laptop as on the router, for example, 802. 11B or 802. 11 g.
  Last but not least you must update the firmware on your router. You can find it on the site of the factory. After the firmware update unplug the router for 5 minutes of the AC adapter.

  Good luck!

  PS: Wake on Wireless LAN has nothing to do with this issue. It of a feature that you can boot the laptop via a WLAN connection.

• Windows Vista - no start menu and blinking pointer

  Original title: Please help me "solve this problem."

  I DON'T KNOW WHAT EXACTLY IS THE PROBLEM. BUT WHATEVER IT IS... I don't understand!  THIS IS MY FOURTH ATTEMPT TO GET HELP FROM THE MICROSOFT COMMUNITY.  WHENEVER I GET THIS FAR WITH IT, I CLICKED ON 'TRANSFER' I GET "LOGGING IN OFFLINE MODE" AND IS IMMEDIATELY CUT IN OFFLINE MODE!
  AND I CAN'T CALL THE "MICROSOFT CALL DESK" BECAUSE I'M ALMOST YOUR MINUTES ON MY CELL PHONE, AND DO NOT HAVE A FIXED POSITION.  BUT I DESPERATELY NEED HELP!  I DON'T KNOW IF THIS WILL GET THRU OR IF I'LL GET CUT NEW OFFLINE SO SICK KEP IT RUNS [KEYWORDS] PROBLEMS;  START MENU, THE MOUSE POINTER ARROW FLASHES, VERY LIMITED USE AND KEEP CUTTING IN OFFLINE MODE.  IT IS WHAT IS A VIRUS?   Help, please?   THANK YOU VERY MUCH [ADVANCE] TO HELP WITH THIS!

  Hello

  I'm sorry to hear that you are facing many problems with Windows vista. I suggest you follow the suggestions and check.

  1. don't you make changes on the computer before the show?
  2. you receive an error message?
  3. What is the brand and model of the computer?

  You can try to boot into safe mode with network and try to run a Microsoft security scanner and check.
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  You can run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  Just reply with the results. I'd be happy to help you further.

• How to hide the command-line on the scrreen Vista Boot start?

  Equipped with Windows Vista.  Some had work done on my PC, and they ran a Vista repair to the problems.  Now when the computer starts, a few command lines appear on the screen until it dark.  Prefer not to see.

  In the old days, I would simply move the Echo Off before these lines in the autoexec.bat file.  Understand that Vista works differently in what concerns the autoexec.bat file.

  Hello

  This means that your computer is configured to boot from CD/DVD. There are 2 ways to avoid this screen.

  1. make sure that you start the computer with no CD/DVD in the drive.

  2. you will need to boot the computer into the BIOS and change the first boot of CD/DVD to hard drive device. To do this, you can contact the computer manufacturer and check.

  Warning: modification of the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Computer Windows 7 cannot access the files on computer Vista but Vista is started the last. Both lasted upgrades of the operating system.

  Both have the latest upgrades of the operating system. Both are running the same version of MacAfee. He used to work without problems up to several weeks, there may be a problem of automatic update but I don't know. Disabled the two walls of fire, nothing works. Cable network Ehternet WORKGROUP. Windows 7 computer can access files through their prorgrams course that Thunderbird (save the attachment without problems) or previously network drive is available. Just Windows Explorer does not see the computer. As soon as I restart the Vista computer, it is visible in Windows Explorer. It's the computer Vista is a central workstation with others and inspires other users that connect at different times of the day that the central computer must be restarted for full access. XP-based computers do not have a problem and can access the files at any time. It is the only computer of Vita.

  Hello

  Follow these steps and check if that helps:

  (a) open centre network and sharing by clicking the Start button, clicking Control Panel, clicking Network and Internet, click Network and sharing Center.

  (b) click on the arrow next to public folder sharing, and then click one of the following options:

  i. turn on sharing so anyone with network access can open files

  II. turn on sharing so anyone with network access can open, change and create files

  III. turn off sharing (people logged on to this computer can still access this folder)

  (c) click on apply.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  You can also read this article and check if this may help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-files-with-someone

• I don't remember my Windows Vista administrator password

  I don't remember my Admin Windows password! I'm stuck on the notes page. I'm not really computer literate, and I don't know what to do or where to start! I read a few posts organizing users to reinstall, but this means it that I have to go and buy a new CD of windows vista.

  * original title - PROBLEMS of PASSWORD *.

  I don't remember my Admin Windows password! I'm stuck on the notes page. I'm not really computer literate, and I don't know what to do or where to start! I read a few posts organizing users to reinstall, but this means it that I have to go and buy a new CD of windows vista.

  * original title - PROBLEMS of PASSWORD *.

  We cannot help you.

  This forum no person shall help users to bypass the password protection. Regardless of the reasons.

  Link to policy:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• Vista has started with a normal window then changes to one with zoom 150 and no navigation

  After my computer did an automatic update, the screen changed.  It starts with a normal screen but then goes to a 150% or more with no navigation or any level of zoom in the status bar.  So cannot use Control Panel controls to adjust the screen resolution, want to do?   Do not have original install disks that the computer came preloaded.

  Hello

  If you could get in Control Panel, you can use the ENTER key to OK to change settings

  and read this;

  There are a number of things to try:

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Change the screen resolution

  __________________________________________________________

  or try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  ________________________________________________________

  and change how to get updates for you to choose what you install to stop it happening again

  You may need to install one at a time to find the problem, we

  Make sure that you do not use Windows Update to install the drivers of 3rd material part

  Find them directly in the hardware manufacturer

  and when you see the problem update right click on it - UAC prompt - then hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  ______________________________________________________

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246