don't not running disc can hear the rotating disc but nothing on the screen

Similar Questions

• G56-127nr, do not start, I can hear the motor, but I have a black screen

  I've tried the hard reset test, it did not work... my caps lock flashes also once every three or four seconds... Please help

  bumbleebee wrote:

  I've tried the hard reset test, it did not work... my caps lock flashes also once every three or four seconds... Please help

  According to the guide for your laptop computer, the processor is not functional.  It is most likely will have to be repaired, but before that, you can try reseating the RAM/hard.

  Follow the instructions for reinstalling the RAM here: http://support.hp.com/us-en/document/c01732674

• Lightroom does not start, I can see the screen of boot, then Windows-say that it must close

  I tried to load the microsoft c ++ and Visual Basic 2005, 2008, 2010, 2012, 2013 redistributable, which did not help... it's a lenovo w541, I already had a w540 with no problems at all...

  Thank you for the information.

  It seems a problem with the graphics card on the computer that is causing Lightroom to crash.

  I suggest that you please try the troubleshooting steps in the following article: Adobe Lightroom GPU troubleshooting and FAQ

  Let me know if it helps.

• I can hear a wav file, but could not get the video from my camera.

  original title: file WAV on Vista

  I can hear a wav file, but could not get the video from my camera.

  I have windows vista?

  Hello
  WAV files will be audio only.
  You can save this file as an MP4.
  B Eddie

• Error message "Windows can't open add printer." The local print spooler service is not running. Please restat the spooler or restart the machine. "while trying to add printers in Windows 7

  Original title: my laptop has lost all printers and windows & no longer recognizes them. Help! I can't print anything

  I use my laptop computer in a docking station.  I took it out to take for a trip and when I got home I plugged it back (as I always do).  Just before the trip, I have upgraded to Windows 7 and all my printers were working very well.  When I got home and pluged again, Windows does not recognize one of my printers.  When I try to add printers a say8ing error message "Windows can't open add printer."  The local print spooler service is not running.  Please restat the spooler or restart the machine. "I tried to restart and turn off the printer, etc.  Can someone help me?

  Hi RobynGP,
   
  This may occur if the print spooler requires other services, and these services are not running. To resolve this issue, follow these steps:
   
  1. in Services, right-click on print spooler and then click Properties.
  
  2. click the Dependencies tab. The first box list all system services that must work for the print spooler start. These are dependencies.
  
  3 make a note of each service, click OK, and restart each service on which the print spooler is dependent, if the service is not already started. If a service is not started, right-click, click Properties, and then make sure that the startup type is automatic.
   
  Let us know if this helped.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Why other software can 'hear' the output of the sound card

  Hi guys.

  Now I'm confused on the audio system of the computer. I installed a telephony software named SJPhone 1.65 on my Windows XP, and I used the SJPhone to establish communication with another computer also running SJPhone. When I played a song with Windows Media Player on my Windows XP, I can hear the sound on the computer that was on a call with my Windows XP, but low volume and few noises. Why could the SJPhone 'hear' the speech output through WMP on my XP? What is the process of audio streams in Windows Media Player for SJPhone? Because I do not know the audio driver and the audio system of the computer, if any could tell me the reason? P.S:my sound card is SIGMATEL STAC 92XX C-Major HD Audio
  I can provide more information if you need.
  Best wishes

  You have a device audio cheapo. It can only a stereo stream channel at the same time so large pieces all together for the same result... Solution: either don't use WMP to call, or get a second audio device and use one for the phone and the other for the WMP. However, it is a real * to implement in XP. Good luck. Cheers, jerry

• When I start RCT3, I can hear the sound of the game, but the image disappears. It's almost as if the monitor is disconnected from the computer. This could be the cause?

  Original title: race Roller Coaster Tycoon 3

  When I start RCT3, I can hear the sound of the game, but the image disappears. It's almost as if the monitor is disconnected from the computer. This could be the cause?

  Hi Redbaron666,

  Have you checked if the game works the clean boot?

  I see that Rollercoaster Tycoon 3 is not compatible with Windows 7 which could be the cause of this problem:

  Windows 7 Compatibility Center

  Method 1: You can run the game in compatibility mode and then check

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When in Skype, I can hear the other party but they cannot hear me?

  We both mutually see which is very good and they come loud and clear... but they don't heard me not at all.

  Hi Gayle,

  Thanks for posting your question in the microsoft community.

  I understand that if you can hear the other party but they cannot hear you.

  The question is limited to Skype?

  I suggest that you contact the Skype support, that they would be better suited to help this issue. Check out the link and ask the question.

  https://support.Skype.com/

• I have Annoying problem, I can hear the sound of the headphones and portable speakers...?

  I recently bought (Dell inspiron 3537), windows 7 64-bit (6.1 build 7601), more info on first image,.

  http://i.imgur.com/SBEezVe.PNG

  but I have a problem when I have a headphones connection to the laptop... the headset works well, BUT I can hear the sound of the headphones and computer speakers posing problem, I want to hear the sound of the headphones only, see the shot of images >

  http://i.imgur.com/lpkKxMp.PNG
  http://i.imgur.com/MXmP6FL.PNG
  http://i.imgur.com/WCpTZCI.PNG
  http://i.imgur.com/ikDKvr1.PNG
  http://i.imgur.com/UIYDAVD.PNG
  http://i.imgur.com/nsrreYQ.PNG

  can you help me please?

  1. open the Device Manager and right click on Realtek High Definition Audio.

  2 Select this option to "Update driver software".

  3. click on "Browse my computer for driver software".

  4. click on "Let Me pick from a list of drivers on my computer".

  5. put the "Show compatible hardware" check box if not already checked.

  6. in the list of devices, click on 'High Definition Audio'.

  7, click on "next".

  8. in the update driver warning box, click 'Yes' (the driver).

  Install the native driver. Immediately test the headphones/speakers.

  If the list of drivers to step 6 do not include "High Definition Audio" then please use the Windows system restore. It is quite safe to use because if you don't like the results, you can undo the restore operation.

• Custom surface Kaplan video plays, but I can hear the sound... Help

  I have the original Surface that is out and it has the latest updates. I have Kaplan videos I watch. To play the videos screen and I can hear the video, but I can't see the videos. I assured that my shockwave player and all that much good has been activated but still does not properly. I bought the surface because I thought it would be easier to study with her and watch my kaplan videos wherever I am at since his lighter to a laptop, but it turned out to be completely unnecessary. Help

  Hello

  Make sure that you install all updates through Windows Update.

  Perform the steps in the article, and the check.

  Flash drive problems | Windows 8

  http://helpx.Adobe.com/Flash-Player/KB/Flash-Player-issues-Windows-8.html

  Note: You can obtain updates only through the Windows Update mechanism.

  If the problem persists, you can perform the procedure described here.

  Why the videos will not play in Internet Explorer?

  http://Windows.Microsoft.com/en-AU/Internet-Explorer/videos-Don ' t work #ie = ie-11

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope this information helps. Response with status so that we can help you.

• I can hear the media imported from the first image

  I imported an MP3 in Flash Professional CC (using the action script 3.0), in the scene. I left enough empty frames for audio to run. When I play the chronology of the first picture, I can hear the audio fine, and it continues until the executives run out. However, when I play the timeline of any other image, the sound does not play. Help would be gladly appreciated, if you need more detail, do not hesitate to ask.

  You must clear all keyframes. Stretch a single image without adding keyframes or whenever you create a new keyframe, you wipe out the audio.

  So remove all executives except chassis 1 where your audio should be. Click inside the frame 1. Press F5 to insert images and you will see that the frame is extended without creating a new keyframe. You can also hold CTRL and roll your mouse over the right edge of a framework that will transform the cursor of the mouse in a left/right arrow, then click and drag the right edge of the frame with.

  When the chassis is spread with no additional key frames you will see there is a waveform represented:

  

• Error code: n8156-6013, Netflix will not run and cannot remove the file mspr.hds saying he was in use.

  Original title: n8156-6013

  After the installation of new card motherboard and CPU - Netflix will not work. Got code error n8156-6013 - tried to delete the file mspr.hds - MS wouldn't let me delete the file - says it is in use. Windows Media Center is not running. What is the problem?

  Hello

  a. click Start, type services.msc in start search and press enter.

  b. Services, search for Windows Media Player Network Sharing Service, Windows Media Center Receiver Service, and Windows Media CenterScheduler Service.

  c. double click services and click the stop button, change to disabled startup type.

  d. restart the computer and see if you can remove the mspr.hds file.

  Once the problem is solved, back to services and start the services.

• nothing comes on the screen but I can hear the game.

  nothing appears on the screen but I can hear the game, it's just a blank black screen.

  Hi TiaBurt,

  (1) what version of operating system do you use?

  (2) game that you are trying to read?

  (3) have you been able to play the game earlier?

  (4) you are able to play games without problems?

  First and the best suggestion for now would be to uninstall and reinstall the display updated the manufacturer drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Retrieve information for assistance

  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Black screen when viewing of DTV, can hear the program, but no image.

  original title; Windows XP Media Center Edition 2005 - black screen when viewing of DTV, can hear the program, but no image.

  When I set up my Windows XP Media Center Edition PC to view DTV, I used the Setup etc., XP scanned and found all the available DTT channels. I thought as much, worked for BBC1, BBC2, worked, then I went to view ITV1 and other channels, could hear the noise perfectly, but there is no picture, just a black background. He used to work because I previously installed the computer. However, wouldn't be a difference that the TV signal will of the antenna, in a block of TNT, and then in the computer, there always used to work. I have that, it is not a signal problem because I could watch the TNT cable SCART on the computer and the image and the sound is fine just using the freeview box. It seems to be the Media Center. Please can someone help me? Thank you

  Apparently, this was caused by an outdated ATI graphics card driver. I recommend upgrading your graphics card driver to resolve this issue. Should work fine then

• Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate

  Pavilion a1620n won't start, the fans are not running. PS on the light and Sun. Start button does not illuminate. EU tested ps and I was told it was OK. Disconnected from the motherboard except course before directed ps button and the cpu fan has become much brighter, but that's all that happened. Any suggestions on what to check? Checked with VOM push and he seemed to agree. Replaced the MB with the new Board of Directors, that didn't work either. Don't know if it was any good, it was a store Bulletin Board.

  All the indicators you mention leads to the PSU, not the Board of Directors.