Don't Please HELP: 'no bootable image found, notebook will be stop"after execution of SECURE DELETION

Similar Questions

• G725: No bootable image found, mobile will be stopped

  Hello

  If I boot my laptop (G725) after that I checked my fingerprints, I get the following message:

  "No bootable image found, notebook will be stop.

  The laptop stops. I thought that my hard drive MBR must be corrupted or failure of the entire system at all.

  But when I press [Esc] during bios and select this option to "boot the OS partition" I wonder to get fingerprint as usual. This will bring me again to the initial menu that comes when you press [Esc], but in a higher resolution. If I select 'boot from the partition of the OS' once again, windows starts normally. (It can be reproduced and the current way, I work with my laptop)

  (Before above mentioned conduct took place there was a start, where the laptop just showed a blackscreen after the HP BIOS logo screen do nothing for minutes.) Of the hardshutdown system. The next work start, except the stuff of built-in security that takes fingerprints from the BIOS authentication and automatically enters the credentials in windows did not work - I had to manually enter my windows password, fingerprint authentication was not available.

  It was occuing only once. Since then, fingerprint authentication works fine, both the bios and windows-level)

  Is this some kind of BIOS or secure boot bug? What should I do?

  Hello! The first thing you need to do is to remove all BIOS passwords

  Then try to start Windows and sign with your password

  Then, remove the sign of fingerprint reader news and then re-create but not for BIOS, just for Windows

  Good luck!

  Best regards: 1029rjmenvy17t

  Please "KUDO" if you like for thumbs to the top and "Accept as Solution" if this fixed your problem

  To help others find it and helps solve them the same or similar problems

• 4540 proBook s: Please help: not found a bootable image. Laptop will be stop

  Hallo,

  I got 10 original operating system windows. I tried to install ubuntu. but during the installation I think that Mariette a mistake in the selection of the partition.

  now, I'm having a problem that says "No. Bootable OS found, notebook will be stop.

  Please help me how to recover my operating system windows again?

  is this possible or should I reinstall os?

  Most likely, delete you the Windows partition instead of the Ubuntu partition.

  Need to know (1) what OS machine accompanies and (2) what OS you want to restore.

• HP mini 110 computer: Please help me, system error fatal entered current pasword stopped CNU93332K3

  Please help me, system error fatal entered current pasword stopped CNU93332K3

  Hello

  Please try (all lower case):

  e9lofff7sf

  Kind regards.

• Please help me solve this message: Userinit logon application stopped working. I have windows 7. Thank you.

  Please help me solve this message: Userinit logon application stopped working. I have windows 7. Thank you.

  Hello

  -When exactly you receive this error message?
  -Did you do changes on the computer before this problem?
  I suggest to maintain the computer in clean boot mode and check if the problem still persists. A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, see step 7 in binding boot is a way of putting your computer to normal startup mode.
   
  Hope this information helps.

• Please HELP convert LOGO IMAGE VECTOR.

  I'm a slow learner that photoshop is not quite the place to create logos, with your help, so can everyone, anyone, please help me. I do not understand how to get the image in illustrator and convert them into a vector image and keeping all the effects, like the sharp edges in the image. Any help is greatly appreciated. In addition, please keep in mind, I'm not at all familiar with illustrator and was hoping that this forum would be a great help. Thanks a lot for your help in advance!
  God bless you!

  I would like to offer a few points to help adapt to your way of thinking a bit...

  Logos are better drawn into vectors and vector illustrations can serve as a basis for various applications of the brand. In general, a form of logo like the one you have here has a solid black fill only. This is the logo of.

  
  

  Using this base, drawn in scalable vectors, you can start designing variations of color, effect decorated versions, etc., but the basis of single-color vector remains to be the origin of the identity, by providing a starting point for all applications of the brand. Because it is vector art, it can be rasterized to any size appropriate for a given application. Example: Suppose that you need to print the logo with the bevel metal brushed texture and chisel edge (effects, better made in a raster like Photoshop application) on a billboard, or on the side of a truck trailer. You must rasterize the basis vector of single-color to the right size and resolution (specifications provided by the printer), and then apply your effects hatched; (this, as opposed to struggling to reproduce the effects of rasterization in vectors, like you said is a goal of yours). There is nothing wrong to create a logo in pixels when this is done correctly this way.

  There is no real 'conversion' raster to vector. You will need to re - draw (manually trace) the forms using the pen of Illustrator. It is the largest and the most basic of Illustrator skills you can develop, and it takes some practice. Then type "how to use the pen in Illustrator" into your search engine preferred to get a long list of tutorials... and be patient.

• No video playback after HP 64-bit of Windows reinstalled 7 - don't please help

  Hi I was wondering if someone could please help. I recently reinstalled W7 Home Premium 64-bit on my Acer Revo RL70 with graphics Radeon HD6320 after that my upgrade of the W10 went wobbly. Videos worked perfectly before on sites such as Youtube and Amazon Prime. Now, I just get a screen green and sometimes audio, sometimes not. I have uninstalled/reinstalled flash player. The browser is more recent IE11. Graphics drivers are later. One thing I noticed, is that there is now no Center control AMD (don't know if this is relevant). I'm not supremely PC read and write. I searched and refined over the last 2 days before finally coming on this forum I didn't really want to be a pain in the butt of someone. I am now at the point where I am naïve. Any expert pass would have an idea where I am going wrong? Thanks in advance. SY :)

  Update - has just installed Google Chrome and Youtube and other streaming sites seem to work ok. Woohoo! But my favorite browser is still IE (with the awesome Bing home page). If anyone knows if my Internet Explorer settings are to blame in some way? I honestly can't understand... :(

  Hi Simon,.

  With the publication of the description, I understand that you are having problems in playing videos on IE11 on your Windows 7 machine. I will certainly help you get this problem.

  This problem may occur due to hardware acceleration or incorrect settings of internet explorer. We will try these steps and check if that helps.

  Method 1 : Disable hardware acceleration

  I suggest you go through the steps below:

  a. open Internet Explorer.

  b. go to youtube.com.

  c. Select any video to watch.

  d. when it start loading press pause.

  e. right click on the video.

  f. uncheck the box that says hardware acceleration.

  g. restart Internet Explorer.

  Try Method 2, if the problem persists

  Method 2 : Change the settings of Internet Explorer

  Follow the steps below:

  a. open Internet Explorer.

  b. go to tools > Internet Options.

  c. switch to the tab 'Advanced '.

  d. scroll down to the 'Multimédia' heading

  e. make sure that "Play sounds in web pages" is checked. Click on 'ok '.

  Restart Internet Explorer. A test to see if you can hear sounds online.

  For additional information, you can view the article:

  Why the videos will not play in Internet Explorer?

  I suggest you perform the steps mentioned in the article below and check out them.

  http://Windows.Microsoft.com/en-us/Internet-Explorer/videos-Don ' t work #ie = ie-11

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• No sound in flash player don't please help = S

  title and summary says it all, please help me :)
  < edit >
  fixed, it don't you worry
  < / Change >

  title and summary says it all, please help me :)
  
  fixed, it don't you worry
  

• Please help: Windows XP does not start error message: STOP: 0 x 00000024

  Original title: Please help: Windows XP does not start.

  Windows XP does not start, there is a message: STOP: 0 x 00000024. and run CKHDSK/F to check for hard drive corruption. But I don ' t know how to make it work? Please help, thanks.

  If this is the message you get, then you have multiple problems...

  1, xp should be on the C: drive, not F:

  Default C: is for the OS only. With xp on drive F: and you use only a hd

  then the hd must be formatted and all partitions deletion (unless there is a relocation

  the operating system is present). Install the xp installation cd, boot the pc on a cd (some PC need BIOS

  be defined for this, (boot priority), once at the cd menu, press r for recovery console, select 1

  for the C: drive, press enter for the password, type: Diskpart in diskpart, see all partitions, delete all,.

  Create one, press the key type, ESC: EXIT leave pc reboot, install xp from the cd, format it when asked.

  Read kb307654 or kb314058

• No sound after Windows updates - don't Please Help!

  I just finished a full restore my system back to factory settings because I had no noise whatsoever.  After doing this, I had sound for a while, until some update has been installed and now I have not YET healthy.  It's extremely frustrating!  Given that the sound worked until one of the many updates has been installed, this leads me to believe that the update is the cause of the problem.  When I click on the sound tab, it shows that everything is working ok.  I tried everything I can think of to remedy to this problem.  I uninstalled, reinstalled and updated the driver for the sound.  It does not work.  I tried to use the restoration of the system to an earlier time and that doesn't work anymore (because there was not a lot of restore points because I had to complete my system restore.)  I don't know what to do to solve this problem.  I'd do another complete restore of my system, but I'm afraid that the updates will cause the same issue.  I'd appreciate any help!

  Looks like you already tried everything, but the following items may be worth a visit:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  (valid for XP - Vista - 7)

  Solving audio problems in Windows Vista
  http://www.ehow.com/how-does_4966770_troubleshooting-sound-problems-Windows-Vista.html

• HP pavlion 15: Please HELP NO BOOT DEVICE FOUND

  I have a hp laptop that says no boot device found I checked the bios on that everything was the same so I won't change anything and I went to system dignotcts it wouldint work, that I keep for a day and today I keep the battary on the 5 min a6 and I put back my laptop truned it once again, and when he returned to no devices found Boot sccern I clicked on before F2 was a black is a blue fantasy the left now, and then Pentecost on the other one i made the screen a chip test passad I did another test it passed now what I do?

  If troubleshooting does not solve your problem, you need to perform a factory restore or using the partition recovery or recovery discs I hope that you created when you first got the computer:

  http://support.HP.com/us-en/document/c01443463

• Please help scroll pane image size

  http://www.m5zn.com/play-020111120252afye0vqrt-Untitled_1.swf

  image appears well in the scrolling pane

  I can see that.  the registartion point is probably at the top left.  If the reg point is at the center of the image, move.

• HP Envy 17-2110en: could not find a recovery media? No Solution don't Please HELP!

  Hi guys,.

  I have HP Envy 17 - 2110en LS594EA

  I lost my dvd recovery and accidentally deleted the recovery partition. Now, I find anywhere the recovery media. Hp support on the drivers section page there is no recovery media. How can I manage this problem? Thank you

  Concerning

  Hello:

  You can probably find the recovery disks from HP e-partner on the link below.

  Select the country where you live (I did defect to the United Kingdom).

  http://www.best2serve.com/

  In the search of recovery kit window, enter the product number (LS594EA).

  When I entered the site of the United Kingdom part number, it shows that there is a recovery kit.

• Folio 9470 m: Please HELP: no laptop found bootable image stops

  Hello world

  I have a folio elitebook - 9470 m HP and today I formatted diskpartitions all with command prompt (ntfs) because I wanted to clean the SSD to re install Windows 10. After a reboot, I get the error message: "can't find any bootable image, notebook will be stop.

  I tried to select the USB drive as the start number one option because I have a picture of 10 Windows bootable on my USB key. I can't the computer to boot from the USB - stick to install Windows. It makes me really mad because I never had problems like this, and I installed Windows several times on the same notebook. (But never formatait all the diskpartitions)

  So if anyone could help me it would be much appreciated!

  What you can do is to go to the Microsoft website and download the Windows ISO file

  You can either using their all-in-one utility to create a USB flash drive or choose to save the ISO file and then run Rufus to create the USB key.

  https://www.Microsoft.com/en-us/Windows/Windows-10-upgrade

  If a working method so something wrong with your original image.

• Please help me (icloud)

  I buy an iphone 5 c I give him 300 euros when I get home I think it's locked to icloud please help me I have found that you bought Home irreversible him

  Sorry for my bad English

  Unfortunately, the iPhone is locked (find my iPhone Activation Lock - Apple Support) this is why you need to go back to the person you bought.