Don't Win 7, no logon, safe mode or the bios

Similar Questions

• my cd rom will not completely close and when I close it restarts the computer in safe mode. in the technet event log it says the following: IO_ERR_BAD_BLOCK

  The cdrom will not close completely and it won't open when I push the Open button.  When I manually open with a paper clip then close again he still doesn't close completely and it restarts the computer in "safe" mode  In the same newspaper, it has the following:

  Log name: System
  Source: cdrom
  Date: 20/03/2011-16:18:10
  Event ID: 7
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Jeff-PC
  Description:
  The device, \Device\CdRom0, has a bad block.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      7
      2
      0
      0 x 80000000000000
     
      169760
      System
      Jeff-PC
     
   
   
      \Device\CdRom0
      0F0080000100000000000000070004C0000100009C0000C000000000000000000070EB1C000000006378060000000000FFFFFFFF01000000580000C40201000000200A12480200400010000004010000000000000000000048CC860580FAFFFF0000000000000000407B930580FAFFFF806BAC0580FAFFFF6E9D030000000000280000039D6E00000200000000000000700003000000000A00000000110500000000000000000000
   
  

  I'd appreciate any help you could provide.  Thanks in advance.

  Hello

  Looks like the CD-ROM drive is a failure. Uninstall and reinstall the disc and check if this solves the problem. If the problem persists, you should replace the disk.

  To uninstall the drive from Device Manager:
  a. Click Start, then type devmgmt.msc in the start search box then press ENTER.
  b. right-click on the CD and click on uninstall.
  c. restart the computer.

• Can not open in safe mode / clear the cache because firefox is frozen

  I tried to load a page which seems to have had a built-in buggy video ad, and now Firefox is stuck. It stops responding, but when I force quit and reopen it, it opens the offending page, still too and it freezes again. I tried to restart my computer and reinstall Firefox and the problem continues to be. I can't follow the advice I've seen here on open mode without failure or clear my cache, because Firefox crashes before I can do it. I there a way to make these Firefox outdoors? I use Mac OS X 10.6.8 if that matters.

  Thank you!

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• My Firefox exit and gives a "not responding" message once I used Google Mail. I tried to boot into "safe" mode and the problem persists.

  I have a question where Firefox wont ' quit and give a message "not responding" after I've been using Google Mail. It works fine when I'm not using this program. I tried Safe Mode and the problem still happens when I go on Google Mail, so it is not connected with modules, extensions, etc.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. ,

  NEED HELP WITH SERVICE PACK 3.  After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.

  Hi BSRC$, in stock

  1. You have security software installed on the computer?
  2. You receive an error message when you restart the computer?

  Reinstalling Windows XP to the factory setting would not be the first option.

  It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.

  I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• I had checked "extend my desktop to this monitor". I have only 1 monitor though. Now the screen is empty. I rebooted the pc in the hope to go in safe mode but the screen remained blank.__How can I go back to single screen? __

  I had checked "extend my desktop to this monitor". I have only 1 monitor though. Now the screen is empty. I rebooted the pc in the hope to go in safe mode but the screen remains blank.
  How can I go back to single screen?

  Hi Bilipino,

  You have more than one display card? Try to connect your monitor to the another card and see if you can get the display.

  Reference: http://www.microsoft.com/windowsxp/using/setup/hwandprograms/monitors.mspx

  I hope this helps...

• I can't get my computer in safe mode. The custom of menu f8 "Let me pick something other than the normal mode. My keyboard works perfectly fine (obviously since I could press f8), but it won't let me choose Safe mode.

  I can't get my computer in safe mode.  The custom of menu f8 "Let me pick something other than the normal mode.  My keyboard works perfectly fine (obviously since I could press f8), but it won't let me choose Safe mode.  I have a Trojan horse on my computer so I'll try to get it in safe mode.

  Hello

  Start - type in the search-> MSCONFIG box find top - make a right click on - RUN AS ADMIN

  Control - Section Boot - Safe Boot Startup tab and check the boxes below if necessary - APPLY / OK - REBOOT.

  ===========================================================

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• That means the AHCI Mode, Mode RAID & SATA IDE Mode in the BIOS settings means

  That means the AHCI Mode, Mode RAID & SATA IDE Mode in the BIOS settings means

  My computer is having problems when I bought all first it was from another provider which came as a set overclocked PC up the unit everything needed had to be put in my case & add existing hard drives & DVD etc. readers added on the implementation. I used the same location for more than 10 years before that I always built them myself I can build a good setup computer I correspond to different parts inside each other, and then he tested & sent.
  Unfortunately, the store has closed & the owner is sick cannot get their hands on him more & I had to get some add on things like new SSDS & some other bits in my system & the young boy said he would could do this job, but everything went wrong & I lost all new so I decided to recycle me like I used to do it before windows 7-64 came out I was going through a rough patch with me being paraplegic in any case it is difficult to build a new PC, so I chose this store & their confidence that went wrong now & I've been research & learn to catch up with the new technology, I do what I do anyway.
  Thing is my system is never one that you can purchase a manufacturer & I left it with the young boy & it came out all memory & was not necessary but of course upset of that ruined the setting completely overclocked so I did it myself & I got the work faster than ever, & quieter PC I just got the score that he had now , so I'm happy with it, but the names I came across while overclocking I came across that I'm not average or really lot as were dealing with Fast CrossfireX DDR RAM 1600 MHz.
  Please don't tell me that I should not be messing around with what I made since 1989 & made great strides in how everything works, I am not aware about this sort of thing I know SATA what it is & done, but those responsible for setting came from the part of overclocking in the BIOS I put then correctly , but I wanted to know what they represent in more depth. Thanks to anyone who can put me wise on these 3 points only. Malcolm.

  I'm pretty sure that you are on the wrong "forum" for this type of topic. This forum is designed as a support Pro-type Surface ultrabook/tablets and tablet-like Surface.

  That said,

  AHCI - Advanced Host Controller Interface - this is a hardware mechanism that allows the software to communicate with the devices Serial ATA (SATA). It offers features such as connecting hot and native command queuing (NCQ).

  IDE - Integrated Drive Electronics - IDE is basically the 'old' version of AHCI without connection to hot and NCQ. (It is usually used during the era the Parallel ATA (PATA) hard drives)

  Now. Mode AHCI and IDE mode - what is - this? IDE mode is to give you the greatest compatibility with older operating systems. AHCI is as I mentioned above, a modern version of the IDE - use the AHCI mode if you are running recent operating systems (Windows Vista + and Linux kernel 2.6.19+).) IDE mode will allow you to connect older operating systems with SATA drives.

  As I mentioned above, SATA is Serial ATA and the replacement of hard drives Parallel ATA (PATA).

  RAID - this is a storage technology where combine you multiple disks in a unit of 'single', depending on the mode, there may be RAID-0 and RAID-6 and each with different hard drive configurations. I will explain the simple examples: RAID-0 , which is the distribution but no parity or mirroring, this means that there is no data redundancy, if there is a failure on a disc, it will cause the loss of data on the entire RAID array. Ex: You 0110 as writing the data, 01 goes on disk 1 and 10 goes on disc 2, allowing a faster data read/write access.

  RAID-1- This is the opposite of RAID-0, which is mirrored without interlacing (no parity or the other). Basically, this means that you have an exact clone of disk 1 disk 2 disk 1 failure.

  RAID0 + 1 is that both RAID 1 and 0 is, IE interlacing (write data simultaneously to two [or more]. disks more mirroring failure) the minimum amount of disks required for this type of installation is 4 IDENTICAL drives.

  There is also RAID 2, 3, 4, 5, 6. That is just more implemented different configurations of distribution/parity/mirroring on disks.

  That being said, your RAID mode will allow you for some type of RAID configuration, if you choose to do so.

  Supplement: Many SATA controllers can enable AHCI separately or in combination with RAID support. Recommend Intel choose RAID mode on their motherboards, allowing also the AHCI, rather than AHCI/SATA mode for maximum flexibility (in the case that you ever want to build a RAID array), because there are a few problems that occurs, usually BSOD, when you choose a different mode once an operating system is already installed.

• Cannot find switchable graphics mode in the bios.

  Hello. I have 6b04er for HP Pavilion dv6 laptop. I want to switch to fixed mode in the bios to use only discrete videocard (6750 m). I've updated the latest version of the bios for my device, but I can't yet find "switchable graphics mode" option in the bios. Help, please!
  Thank you.

  Spoody Hello, welcome to the Forums of HP. Your laptop should have an option in the BIOS to set fixed mode. Use this document to refer to the screenshot of the BIOS and let me know if your the same section
  (Skip the link title): OpenGL Applications cannot use discrete GPU

  Here's the switchable graphics overview. See the section "Determine whether your computer has switchable graphics" and let me know if this indicates you have switchable graphics: all of the switchable graphics or dual GPU

  Let me know the results.

• shortcuts don't work not except in safe mode

  original problem - could not access the files on server - received ID username/password invalid even after reset of net admin user. What new user created on the desktop icons and start menu has stopped working (double-click appeared to do nothing).

  After experimentation, found that the opening of any .lnk returns fileNotFound exception. In safe mode without problem.

  A ran two separate a / v verifies - ESET and MalwareBytes.

  Tried to disable as many external services and relevant as appeared startup tasks, without result.

  Problem with new shortcuts and newly created the local administrator user.

  This is updated from windows. No effect.

  Help, please! Thank you.

  Hello chaim handler1,.

  I suggest to try in a clean boot in order to eliminate any possible conflict of third parties:

  Step 1: Perform a clean boot
  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
  a. log in the computer using an account with administrator rights.
  b. ClickStartCollapse this includes this image, typemsconfig.exe in the search box, theStart then press ENTER to start the System Configuration Utility.Collapse this includes this imageIf you are prompted for an administrator password or for confirmation, type your password, or clickContinue.
  c. arencontre, clickSelective Startup tab and then click on clear theLoad startup items check box. (Use Boot check box is not available.)
  d. on theServicestab, select hide it all the box, check Microsoft services, and then clickDisable all.

  Note following this step lets Microsoft services continue to operate. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
  e. click OK, and then to clickRestart.
  Step 2: Enable half the services
  a. follow steps 1a and 1B to start the System Configuration utility.
  b. click on the services tab and then click to select theHide all Microsoft services checkbox.
  c. Click to select half of the check boxes in the service list.
  d. click OK, and then to clickRestart.
   
  Step 3: Determine whether the problem returns
  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services, and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.
  Step 4: Enable half of the startup items
  a. perform a clean boot by repeating step 1.
  b. click the theStartup tab and then click to select half of the check boxes in the list of items of theStartup.
  c. click OK, and then to clickRestart.
   
  Step 5: Determine whether the problem returns
  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have initially enabled in the list of items of theStartup.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are disabled in the list of items of theStartup. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be the cause of the problem, repeat step 1 and step 2 without selecting theHide all the box Microsoft services at every step.
  Step 6: Resolve the problem
  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.
  Step 7: Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  a. ClickStart collapse that includes this image, typemsconfig.exe in the search box and press ENTER. Collapse this includes this image
  If you are prompted for an administrator password or for confirmation, type your password, or clickContinue.
  b. on the arencontre tab, click Start zone option, and then click OK.
  c. When you are prompted to restart the computer, clickRestart.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to join start in safe mode when the mouse does not work?

  (I'm on another computer to ask this question). I'm in safe mode; mouse does not work; arrow keys work but don't go to 'start '. How to get started?

  Assuming you have the office showing with all applications minimized or closed, Tab or F6 should pass the Start button and a few other "elements" on the taskbar.  Look closely and you will see a light preview highlighting of the selected item.  Press the Enter key to activate it.

  In XP Safe Mode, the cycle is start button > Quick Launch toolbar > [of any application taskbar icon] > clock > desktop icons.  While the Quick Launch toolbar is highlighted, the arrows move among the icons in the QL toolbar.  While the desktop icon is highlighted, the arrow keys will be touring all the desktop icons.

  Have a look here--> http://support.microsoft.com/kb/301583

• cannot access windows in safe mode because the keyboard is disabled until windows is loaded into the system

  I installed a keyboard wrong driver and now my winxp support with virtually no feature mouse or the keyboard, both frozen. I can't even load windows in SafeMode to solve my problem of driver, because my keyboard lights up until windows is completely loaded into the system. And it was actually a plu problem that I don't take care off the coast in time... Now, I was struck with a bigger question. Any suggestions from anyone, I appreciate it, thanks.

  I have windows xp pro sp3

  Can enter you the BIOS setup? I remember that my system has recognized a key led even with disabled USB legacy support. Then you can activate the support legacy USB in the BIOS. In time, you have to press F8 for safe mode there is normally no active driver at all, everything is managed by the BIOS. Another possible solution would be using a PS/2 keyboard...

• Windows open will not close and the computer does not except in safe mode. The mouse works, but can not open a file or a program.

  I ran the twice successfully system restore, but that did not help. When a window is blocked, hit CTRL-Alt-Del shows an error message "failure of Security Options. I use Vista. Open windows on the desktop were often not well closed for months, but now the computer freezes as soon as I opened the first window. Busy circle is present. Mouse still works but can't do anything for files, etc.

  Hello

  1. don't you make changes to your computer, after which the issue started?

  Follow these steps and check if the problem persists.

  Step 1:

  If it works in safe mode, I suggest that you can start your computer in a clean boot State and check if the problem persists.

  Note: Follow step 7 to your computer as usual.

  Step 2:

  You can perform disk cleanup to clean unwanted files on the computer.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

• my vista operating system continues to run in a loop, saying: Configuring updates 3/3 0 full. Cannot start in safe mode or the other amounts to the same configuration problem

  System downloaded 2 of 3 updates. the third will not update and continues in a loop. Failed to start in SafeMode either. Don't know what to do.

  Hello

  as you cannot start in safe mode, try this

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Firefox continues to go from full screen to the small screen, every minute! I tried to reset to original settings and tried to go into safe mode, and the screen keeps minimizing. Very difficult to work in the window when it is a quarter of the size of my

  At first I thought that maybe I'd hit something, but then I just sat there for a minute (literally) and didn't touch a thing and he always downplayed. I have several tabs open up working on the different classes.

  Try:

  • http://KB.mozillazine.org/Prevent_websites_from_disabling_new_window_features
  • http://KB.mozillazine.org/JavaScript#Advanced_JavaScript_settings

  See also:

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode