done 8600 duplex auto

Similar Questions

• OfficeJet J6480 - duplex Auto is no longer available

  I have 2 laptops Windows 8 nine - a Toshiba and a Lenovo. Both worked fine with the printer on the installer. As soon as I have upgraded to Windows 8.1, the parameter 'automatic' to a duplex in gray and is not available. I uninstalled and reinstalled drivers, and HP solutions Center but no luck for duplex auto return. The two computers are connected wirelessly.

  Hello
  Enter the control panel and go into devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  As installed in Duplex Automatic Two-Sided accessory and then click OK to save the change.

  Automatic duplex printing should now available.

  Kind regards
  Shlomi

• HP officejet pro 8600 duplex scan

  How can I duplex scanner using the charger to top of the page?  Is there a driver or software, I need?  I bought this printer to use this feature.  As a teacher, I want to analyze all my books in my USB.

  Please help me!

  To tell you the 8600 don't scan two-sided on the base model, only on the most and the Premium version of the printer. But in addition, I don't know what you're looking for is possible. Duplex scanning function is reserved for the simple leaves, double-sided media - not for books. With books, the only method for the analysis of these images is through the flat bed scanner because it can't shoot an entire book through the ADF.

  I hope this solves your request!

  -Spencer

• OfficeJet Pro 8600 duplex problem - always resizes

  Hello

  You just bought a Officejet Pro 8600. Install the duplex unit. When I send a book to be printed the 8600 INSISTS on resizing the document, as if obeying some invisible margins.

  The police is also resized.

  This seems to happen regardless the setting 'preserve the page layout.

  I'm on Windows 7 x 64 and I have the latest Firmware

  Grateful for any help

  The only way to prevent resizing the last pages of the 8600 is to use another driver to print with it. I'll link the steps below. Let me know what happens.

  How to assign other drivers to print in different Versions of Windows

• PS C6280 Duplex Auto Feed paper print works do not Win XP

  I use (before reinstalling the drivers and the printer software) be able to PRINT with the DUPLEX MODULE and my printer could automatically feed the document.  However, now it does not automatically feed the paper.  It will be PRINTED on BOTH sides but, I have to manually feed the paper.

  • I have recently reinstalled the printer software and drivers from the HP Support Web page.
  • I did some research on this problem for days now and after all the examples to make sure that the settings are correct in the properties of the printer and Printer preferences.
  • I've tired several thickness of paper.
  • I completely rebooted my printer and the computer several times.

  Here are my coordinates of printers.

  Product name HP Photosmart series C6200

  Product model number CC988A

  Serial number of product {content removed}

  Service ID 18207

  Printer ID 1

  Firmware Version COxxFN0723BR

  Installed automatic duplex printing accessory

  Admin password *.

  Total number of pages 2902

  Country U.S./Canada PCL

  Default symbol value 341

  Any help will be greatly appreciated.

  Dave

  Apparently I don't explain to me like good asw I figured, here are some pictures for you guys help so do not waste time asking questions that are already answered here.

  I hope this helps.

  

  THE STRANGEST THING JUST HAPPENED.  WE HAD A TEMPORARY POWER LOSS OR MOMENTARY IN THE HOUSE.  WHEN THE ELECTRICITY CAME BACK, I RESTARTED MY COMPUTER AND JUST FOR CURIOSITY, TRIED TO PRINT THE DOCUMENT AND ALL WORKED AS HE IS MUST.  I GUESS, THE POWER MUST BE ALSO TURNED OFF INSTEAD OF JUST A RESTART.  I JUST PRINTED AN ADDITIONAL DOCUMENT AND IT PRINTED OK ALSO.

  THANK YOU ALL FOR ALL THE HELP.

  I found the solution. Please read the summary above.

• OfficeJet 8600 duplexing

  When duplex printing paper sometimes the wrinkles or jams.  I tried remove and put in the new document.  I use paper of 20 clips of #, 8.5 x 11.  There is nothing wrong with the printer, I can find physically.

  Thank you.

  There is a Firmware update that can help solve the problem you are experiencing.  Click here  HP Officejet Pro 8600 Firmware flashing (upgrade) requires a cable network or a USB connection.

  Let me know if this helps.

• OfficeJet Pro 8600: disable auto-answer

  Whenever someone calls me (she is not a fax, but a regular phone call) talk to me, I get a message on my printer there is a ' incoming call auto answer on ", then the name and number of the person calling.  I am unable to answer the phone manually.  This just started today.  I have to disable the automatic response to meet again my phone?  If so, how can I disable it?

  Hi @maaryann1008and welcome to the Forums of HP!

  You have set up the printer to receive faxes? Do you want the auto-answer on without it interrupting your calls, or do you just want it out?

  You can make the necessary changes to your fax configuration by using the menus on the front panel of the printer. Please press the arrow on the right side of the touchscreen when on the home screen, and then select Setup. In the configuration menu, choose the fax configuration, ad go to auto answer to turn it off, or go to rings before answer to change the number of rings the printer rings before fax answers.

  Please let me know if these changes on the Panel before solving the problem, or if you need assistance. Thank you.

• OfficeJet Pro 8600-duplex printing upside

  Help! I finally got the two-sided print job, but second page is upside down.

  Hi Nana50

  It seems that one of the parameters must be changed. Use the following link to adjust settings to print on both sides of the page without side being updated down. > Print on both sides of the paper (duplex printing)

  I suspect that you currently have selected short edge binding, you will need to choose binging long edge.

  If you want to see an example of both take a look at this video > 2 sides print Long Edge against short edge

  I hope this helps. Please let me know if that fixes the problem, thanks.

• C8180 don't duplex in windows 7-64 bit

  Have owned this printer c8180 for several years and when I replaced my computer with a 64-bit windows computer 7, it no longer recognizes the duplex unit installed at the back.  How to make this work?

  Thank you.

  Hello
  Enter the control panel > devices and printers.
  Right-click the printer icon, and then click printer properties.
  Click the device settings tab.
  As installed in Duplex Automatic Two-Sided accessory and then click OK to save the change.

  Automatic duplex printing should now available.

  Kind regards
  Shlomi

• HP Officejet Pro 8600 Plus auto conversion print fax

  Hello

  When I click on print a document, a pop-up window appears to send a fax.

  I need to print the document, but it is currently not possible.

  Any suggestions?

  Thanks, PACullen

  Suggest you reload the software again.

• Why don't the auto scroll of snagit does not work in firefox version 3.6.8 if it can be fixed

  I used v9.1 Snagit with Firefox for a long time through many updates, but when I updated to Firefox version 3.6.8 AutoScroll stoped working, I go back to an earlier version of Firefox and it worked OK.

  Read these steps of the Snagit support Web site.

• Printer icon double label explanation yellow Officejet Pro 8600 Plus, automatic duplex short-term paper.

  OfficeJet Pro 8600 Plus, Auto Duplex paper too short. Runnig Windows 7 on Envy 17 3D t. How can I get rid of this 2nd icon, it came after I reconnected to the laptop on the USB port a day. Don't troubleshoot the icon that has yellow mark next to him. The printer is wonderful it prints beautifully. What I've done is by clicking OK on the normal icon created when the printer was installed when the message appears on short Duplesx Auto paper, I click ok and it prints fine. It bothers me that there is a second icon with a yellow mark on it. I know this isn't like that. The system finds no problem do you the troubleshooting tools. Tells me no problems.  Unless she's storying for me. Thank you

  Blessings to all

  Hello

  To solve the problem with the yellow mark righ - click this device and choose uninstall. Restart the system and this problem should be solved.

  To solve the problem with "Auto Duplex paper too short" Please check the link below:

  using my new printer officejet pro 8600, I get a warning "too short paper for auto-recto-sided".

• WRT160N, auto-negotiation has failed at 100 Mbps, can wall jack be the cause?

  Hello

  Can someone please help me with may be a simple problem for you, but it starts to drive me crazy. Sorry in advance for the long post.

  WRT160N installed in the basement, linking (cable) 3 desktops and 2 laptops (wireless). When connecting by wire, some computers have troubles in autonegotiation speed, always end upward with connection failed. Force the speed of 10 Mbit/s full duplex solves the problem.

  Curiously, both computers have no problem to 100 Mbps Full Duplex auto-negotiation (HP nc8430 laptop with 5 years and the Broadcom NetXTreme Gigbyte old IBM ThinkCentre M50 8189-Tower network chip, I do not know the exact network chip, but I think that until the Gigabit). Less than 1 year of office by using a Committee of Asus P5N7A-VM with the integrated Realtek, also Gigabit network chip, still FAILED to negotiate at 100 Mbps. The wall plate has 4 Sockets. The question above is the same regardless of any plug used.

  After several attempts, I think I've isolated the cause to the wall outlet. There are about 6 metres of cable (~ 20 ft) between the router and the wall outlet. The computers connect to the wall using a cable of 2 meters (~ 7 ft). Go through the wall outlets, I pulled a 10 meter cable (~ 30 ft) connecting the router directly to the computer, then the computer is not always to 100 Mbps now could connect without any problems. So, this seems to indicate that the wall socket has altered the quality of the signal.

  The cables (between the router and the wall) are straight with T568B wiring (http://en.wikipedia.org/wiki/T568A/B#Wiring) the sockets are CAT5 RJ45 Keystone Jack free tool (http://www.amazon.com/CAT5-RJ45-Keystone-Jack-Black/dp/B000BSN7RO)

  So here are my questions:

  Q1. A wall outlet would cause a loss of significant signal or alteration?

  Q2. If the wall outlet is the cause of the loss of signal quality, how is it some computers have no trouble to autonegotiation to 100 Mbps Full Duplex and also when forced to 10 Mbps FD, all network problems disappear?

  Q3. And the most important question: can you please provide a solution?

  Thank you very much in advance for any help.

  Hello

  Follow up and FINAL solution to close this thread. The cause was the wall outlet. All sockets are of the type version tool-less Keystone Cat5e. All the exihit speed negotiation issue and can be used at 10 Mbit/s full duplex.

  I could borrow a punchdown tool and tried a new plug. This time, I tried Keystone Cat6 jack _WITH_ tool. Can be overkilled my cable is Cat5 only. But I don't want to take any risks because the price difference is negligible between Cat5e and Cat6 decision. The new Jack is working perfectly. The AutoDetect computer easily at 100 Mbit/s/s. The fix is so obvious, as soon as I replace threaded plug by a Jack of tool WITH the speed issue disappeared. I have connect / disconnect several times, even restarted the computer to ensure that the new Jack is working OK

  Although I'm not a guru in network cabling. But I'm not computer (using Windows & Linux) and I'm quite a handyman. I can't possibly screw up Assembly of ALL taken without tool, I've had. And the misconfiguration of the network in the operationg system is out of the question. Added to this fact that the new tool WITH jack is much easier to mount and all prectly work on the first attempt. I would say in conclusion that WITHOUT TOOL, CLAMP in Ethernet JACKS are UNSTABLE. At least that's my experience.

  It's pretty frustrating, that Jack is the last place I guess as a cause of a wiring problem. I changed to RJ-45 Sockets, wiring maps network and same router. All this has not solved until one day I discovered by chance that the cause was the wall outlet. (New computer loan with Ubuntu, I forgot to reduce the network speed to 10 Mb and directly connected to the switch without going through the wall socket and discovered that the computer can connect immediately to 100 MB).

  Hope this might help someone else.

• HP envy 4500: duplex

  Hi all, I just got this printer, up to now, I've just played with it. Today, I tried to print a greeting card. I went to print and set to print on both sides, turning short side, then in printing without margins chose properties and print again both sides. When you click the error message correct contradictory questions indicating a paper is A4 (correct) indicating the other "print on both sides is 'on'."  So I go into the tab layout, if I turn manual printed both on and outside it gives the same error. I HAV to the Manager to get out of the circle.  I managed by fiddling to get to print on both sides, but thefront page has a border not a good glance. There must be a way to print without margins and also the two sides who are in the front, inside and back a greetiing card it is a popular pastime.  Thank you. don't know if this help but time available to three tabs, paper/quality and shortcut sometimes show the same screen.

  Hello

  You cannot print duplex without borders on several printers, it must forget duplex (auto or manual) printing one by one and turn page (don't select duplex).

  Hope this heps.

• HP DeskJet 3632: Just check an automatic duplex unit cost?

  Maybe in the future, I invest in an automatic Duplexer for my printer HP DeskJet 3632.

  Where can I find a how would cost?

  Thanks in advance!

  Jesse Williams

  Sorry you can not add a duplexer auto to this device.